S9S12DG25F0MPVE - 16-bit MCU, 256KB Flash, 25MHz, AEC-Q100 | NXP
MPN: S9S12DG25F0MPVE ✓ AktifS9S12DG25F0MPVE Ringkasan
An automotive MCU is a microcontroller engineered to operate reliably under the harsh environmental conditions found in vehicles, including extended temperature ranges, voltage transients, and electromagnetic interference. The S9S12DG25F0MPVE sits within the broader product hierarchy: microcontroller (MCU) -> embedded processor -> automotive-qualified IC -> semiconductor device. Its AEC-Q100 qualification and -40°C to +125°C operating range place it firmly in the automotive-tolerance tier required for under-hood, body, and chassis ECUs.
Key features include a CISC-based HCS12 core with 25MHz bus speed, BDM (Background Debug Mode) for non-intrusive in-circuit debug, PWM outputs for motor control, and a Watchdog Timer for functional-safety integration. The generous 256KB Flash and 4KB EEPROM enable substantial on-board calibration tables, fault logs, and bootloaders, while 91 GPIO pins provide ample headroom for sensor fusion and actuator drive.
The S9S12DG25F0MPVE's HCS12 architecture uses a 16-bit data path with an enhanced co-processor instruction set, achieving strong code density for C compilers and an interrupt structure well-suited to deterministic control loops. The 112-LQFP package balances I/O density with manageable PCB footprint, while internal voltage regulators allow single 5V supply operation.
Typical applications include automotive body controllers, instrument clusters, HVAC climate-control modules, and CAN-connected sensor nodes. Industrial variants of similar S12 devices are used in motor-control and building-automation subsystems where automotive-grade robustness is valued. Key design considerations include proper decoupling per NXP's AN and adequate thermal management for the LQFP-112 thermal envelope.
Alternatif penggantian untuk S9S12DG25F0MPVE — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian S9S12DG25F0MPVE (sama faktor bentuk dan footprint) — berbeda di dalam Program Memory Size, Core Processor, RoHS Status, Connectivity, EEPROM Size.
MC9S12DT128MPVE
✅ Drop-InKontak untuk harga
Lihat Datasheet →MC9S12DG128MPV
✅ Drop-InKontak untuk harga
Lihat Datasheet →MC9S12A512CPVE
✅ Drop-InKontak untuk harga
Lihat Datasheet →MC9S12A64CPVE
✅ Drop-InKontak untuk harga
Lihat Datasheet →MC9S12E64MPVE
✅ Drop-InKontak untuk harga
Lihat Datasheet →MC9S12E256CFUE
✅ Drop-InKontak untuk harga
Lihat Datasheet →S9S12DG25F0MPVE Rating Maksimal & Karakteristik Listrik
| Core Processor | HCS12 |
| Core Size | 16-Bit |
| CPU Speed | 25 MHz |
| Program Memory Type | FLASH |
| Program Memory Size | 256 KB (256K x 8) |
| EEPROM Size | 4 KB (4K x 8) |
| Number of I/O | 91 |
| Connectivity | CANbus, I²C, SCI, SPI |
| Peripherals | PWM, WDT |
| ADC | 2x 8-channel, 10-bit |
| Timers | 8-channel IC/OC Enhanced Capture Timer |
| Suhu Kerja | -40°C to +125°C |
| Paket / Case | 112-LQFP (20 x 20 mm) |
| Tipe Mounting | Surface Mount |
| Automotive Qualification | AEC-Q100 Qualified |
| Status RoHS | Compliant |
| Lead-Free | Yes |
Konfigurasi Pin S9S12DG25F0MPVE
| Pin produk 1 | VDDR — Voltage regulator power supply |
| Pin produk 2 | VDDX — External power supply |
| Pin produk 3 | XFC — PLL filter capacitor |
| Pin produk 4 | VDDPLL — PLL supply |
| Pin produk 5 | TEST — Test mode input |
| Pin produk 6 | VSSX — External ground |
| Pin produk 7 | RESET — Active-low reset input |
| Pin produk 8 | MODC — Mode selection |
| Pin produk 9 | BKGD — Background debug mode pin |
| Pin produk 10 | PE7 — Port E bit 7 / CAN TX |
| Pin produk 11 | PE6 — Port E bit 6 / CAN RX |
| Pin produk 12 | PE5 — Port E bit 5 / SCI TX |
| Pin produk 13 | PE4 — Port E bit 4 / SCI RX |
| Pin produk 14 | PE3 — Port E bit 3 / SPI MOSI |
| Pin produk 15 | PE2 — Port E bit 2 / SPI MISO |
| Pin produk 16 | PE1 — Port E bit 1 / SPI SCK |
| Pin produk 17 | PE0 — Port E bit 0 / SPI SS |
| Pin produk 18 | PA7 — Port A bit 7 |
| Pin produk 19 | PA6 — Port A bit 6 |
| Pin produk 20 | PA5 — Port A bit 5 |
| Pin produk 21 | PA4 — Port A bit 4 |
| Pin produk 22 | PA3 — Port A bit 3 |
| Pin produk 23 | PA2 — Port A bit 2 |
| Pin produk 24 | PA1 — Port A bit 1 |
| Pin produk 25 | PA0 — Port A bit 0 |
| Pin produk 26 | VDDA — Analog supply |
| Pin produk 27 | VSSA — Analog ground |
| Pin produk 28 | PAD07 — Analog input / digital I/O |
| Pin produk 29 | PAD06 — Analog input / digital I/O |
| Pin produk 30 | PAD05 — Analog input / digital I/O |
| Pin produk 31 | PAD04 — Analog input / digital I/O |
| Pin produk 32 | PAD03 — Analog input / digital I/O |
| Pin produk 33 | PAD02 — Analog input / digital I/O |
| Pin produk 34 | PAD01 — Analog input / digital I/O |
| Pin produk 35 | PAD00 — Analog input / digital I/O |
| Pin produk 36 | VDD — Digital supply |
| Pin produk 37 | VSS — Digital ground |
| Pin produk 38 | PJ7 — Port J bit 7 |
| Pin produk 39 | PJ6 — Port J bit 6 |
| Pin produk 40 | PJ5 — Port J bit 5 |
| Pin produk 41 | PJ4 — Port J bit 4 |
| Pin produk 42 | PJ3 — Port J bit 3 |
| Pin produk 43 | PJ2 — Port J bit 2 |
| Pin produk 44 | PJ1 — Port J bit 1 |
| Pin produk 45 | PJ0 — Port J bit 0 |
| Pin produk 46 | PK7 — Port K bit 7 |
| Pin produk 47 | PK6 — Port K bit 6 |
| Pin produk 48 | PK5 — Port K bit 5 |
| Pin produk 49 | PK4 — Port K bit 4 |
| Pin produk 50 | PK3 — Port K bit 3 |
| Pin produk 51 | PK2 — Port K bit 2 |
| Pin produk 52 | PK1 — Port K bit 1 |
| Pin produk 53 | PK0 — Port K bit 0 |
| Pin produk 54 | PM7 — Port M bit 7 |
| Pin produk 55 | PM6 — Port M bit 6 |
| Pin produk 56 | PM5 — Port M bit 5 |
| Pin produk 57 | PM4 — Port M bit 4 |
| Pin produk 58 | PM3 — Port M bit 3 |
| Pin produk 59 | PM2 — Port M bit 2 |
| Pin produk 60 | PM1 — Port M bit 1 |
| Pin produk 61 | PM0 — Port M bit 0 |
| Pin produk 62 | PP7 — Port P bit 7 / PWM |
| Pin produk 63 | PP6 — Port P bit 6 / PWM |
| Pin produk 64 | PP5 — Port P bit 5 / PWM |
| Pin produk 65 | PP4 — Port P bit 4 / PWM |
| Pin produk 66 | PP3 — Port P bit 3 / PWM |
| Pin produk 67 | PP2 — Port P bit 2 / PWM |
| Pin produk 68 | PP1 — Port P bit 1 / PWM |
| Pin produk 69 | PP0 — Port P bit 0 / PWM |
| Pin produk 70 | PS7 — Port S bit 7 / SPI |
| Pin produk 71 | PS6 — Port S bit 6 / SPI |
| Pin produk 72 | PS5 — Port S bit 5 / SPI |
| Pin produk 73 | PS4 — Port S bit 4 / SPI |
| Pin produk 74 | PS3 — Port S bit 3 / SCI |
| Pin produk 75 | PS2 — Port S bit 2 / SCI |
| Pin produk 76 | PS1 — Port S bit 1 / I²C SDA |
| Pin produk 77 | PS0 — Port S bit 0 / I²C SCL |
| Pin produk 78 | PT7 — Port T bit 7 |
| Pin produk 79 | PT6 — Port T bit 6 |
| Pin produk 80 | PT5 — Port T bit 5 |
| Pin produk 81 | PT4 — Port T bit 4 |
| Pin produk 82 | PT3 — Port T bit 3 |
| Pin produk 83 | PT2 — Port T bit 2 |
| Pin produk 84 | PT1 — Port T bit 1 / ICOC timer |
| Pin produk 85 | PT0 — Port T bit 0 / ICOC timer |
| Pin produk 86 | PJ7_ALT — Reserved / not connected |
| Pin produk 87 | PB7 — Port B bit 7 |
| Pin produk 88 | PB6 — Port B bit 6 |
| Pin produk 89 | PB5 — Port B bit 5 |
| Pin produk 90 | PB4 — Port B bit 4 |
| Pin produk 91 | PB3 — Port B bit 3 |
| Pin produk 92 | PB2 — Port B bit 2 |
| Pin produk 93 | PB1 — Port B bit 1 |
| Pin produk 94 | PB0 — Port B bit 0 |
| Pin produk 95 | PC7 — Port C bit 7 |
| Pin produk 96 | PC6 — Port C bit 6 |
| Pin produk 97 | PC5 — Port C bit 5 |
| Pin produk 98 | PC4 — Port C bit 4 |
| Pin produk 99 | PC3 — Port C bit 3 |
| Pin produk 100 | PC2 — Port C bit 2 |
| Pin produk 101 | PC1 — Port C bit 1 |
| Pin produk 102 | PC0 — Port C bit 0 |
| Pin produk 103 | PD7 — Port D bit 7 |
| Pin produk 104 | PD6 — Port D bit 6 |
| Pin produk 105 | PD5 — Port D bit 5 |
| Pin produk 106 | PD4 — Port D bit 4 |
| Pin produk 107 | PD3 — Port D bit 3 |
| Pin produk 108 | PD2 — Port D bit 2 |
| Pin produk 109 | PD1 — Port D bit 1 |
| Pin produk 110 | PD0 — Port D bit 0 |
| Pin produk 111 | PF7 — Port F bit 7 |
| Pin produk 112 | PF6 — Port F bit 6 |
Aplikasi Umum
S9S12DG25F0MPVE cocok untuk 6 aplikasis: Automotive Body Control Module (BCM), Instrument Cluster Display Driver, HVAC Climate Control Module, Automotive Sensor Node (CAN-connected), Seat Control and Memory Module, Industrial CAN-Based PLC Node.
Automotive Body Control Module (BCM)
The S9S12DG25F0MPVE's AEC-Q100 qualification and -40°C to +125°C range make it ideal for body control modules managing lights, door locks, wipers, and exterior mirrors. Its CANbus interface integrates directly with vehicle CAN busses running at 125-500 kbps, while the 91 GPIO pins drive relays, FETs, and LEDs without external expanders. The 256KB Flash holds BCM application code plus turn-signal timing tables and door-ajar debounce firmware. The two 10-bit ADCs sample battery voltage and ambient sensors for state-of-health decisions. PWM channels control LED dimming and mirror positioning with deterministic edge timing that satisfies OEM EMC requirements.
Direkomendasikan
Instrument Cluster Display Driver
Driving analog gauges and stepper motors for instrument clusters requires precise timing - exactly where the S9S12DG25F0MPVE's enhanced capture timer excels. The HCS12 core at 25MHz computes gauge nonlinearities and fuel-level filtering in real time, while 256KB Flash stores OEM-specific graphics tables and odometer data in the 4KB EEPROM for tamper-resistance. SPI connects to LED drivers, and SCI handles diagnostic communication with the vehicle's gateway ECU. The 112-LQFP package fits behind cluster bezels with room to spare, and AEC-Q100 qualification covers the +85°C ambient with margin for sun-load thermal soak.
Direkomendasikan
HVAC Climate Control Module
HVAC modules demand robust analog sampling and reliable motor control - the S9S12DG25F0MPVE's two 8-channel 10-bit ADCs monitor cabin temperature, humidity, sun-load sensors, and blend-door position feedbacks simultaneously. PWM outputs drive blower speed and mode-door actuators with hardware-generated waveforms that free the CPU for higher-level control. The HCS12 core runs PID loops for temperature regulation at 25MHz, and CANbus interfaces with the vehicle network for setpoint commands from the HMI. AEC-Q100 qualification ensures reliability in dash-top environments that routinely exceed +85°C.
Direkomendasikan
Automotive Sensor Node (CAN-connected)
Smart sensor nodes for pressure, temperature, and position sensing benefit from the S9S12DG25F0MPVE's CAN interface, PWM, and ADC combination. The 91 GPIO drives local actuators and reads redundant sensor pairs for ASIL-rated diagnostics. Flash holds calibration curves and end-of-line test results; EEPROM stores node-identifying data. The HCS12's deterministic interrupt latency suits sub-millisecond sensor-fusion cycles. Operating from -40°C to +125°C, the part can sit in engine-bay sensors and wheel-hub modules where commercial-grade MCUs fail.
Direkomendasikan
Seat Control and Memory Module
Memory seat modules adjust position, lumbar, and heating while recalling driver profiles. The S9S12DG25F0MPVE's 4KB EEPROM stores multiple driver profiles reliably across +125°C thermal cycles, while 256KB Flash holds motor-control firmware and end-of-line calibration. PWM channels drive seat motors with soft-start profiles that reduce mechanical stress, and the enhanced capture timer measures motor pulse feedback for closed-loop position control. CANbus communicates seat occupancy to airbag ECUs and dash clusters.
Direkomendasikan
Industrial CAN-Based PLC Node
Although optimized for automotive, the S9S12DG25F0MPVE's robust peripherals and AEC-Q100 hardening make it suitable for industrial CAN nodes where harsh temperatures and EMI are routine. The CAN interface integrates with factory CANopen or DeviceNet networks, while PWM controls motor starters, and 10-bit ADCs monitor 4-20 mA loops through external resistors. The 256KB Flash accommodates IEC 61131-3 runtime or ladder-logic interpreters, and the 112-LQFP package provides enough I/O for typical 16-32 digital-input PLC cards in distributed control cabinets.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk S9S12DG25F0MPVE — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | MC9S12DT128MPVE | MC9S12DG128MPV | MC9S12A512CPVE | MC9S12A64CPVE | MC9S12E64MPVE | MC9S12E256CFUE |
|---|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 112-LQFP (20x20) | 112-LQFP (20x20) - same | 112-LQFP (20x20) - same | 112-LQFP (20x20) - same | 112-LQFP (20x20) - same | 112-LQFP (20x20) - same | 112-LQFP (20x20) - same |
| Core | HCS12 (16-bit) | HCS12 (16-bit) | HCS12 (16-bit) | HCS12 (16-bit) | HCS12 (16-bit) | HCS12 (16-bit) | HCS12 (16-bit) |
| CPU Speed | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz |
| Flash Size | 256 KB | 128 KB (-50%) | 128 KB (-50%) | 512 KB (+100%) | 64 KB (-75%) | 64 KB (-75%) | 256 KB (same) |
| EEPROM Size | 4 KB | 2 KB | 2 KB | 4 KB | 2 KB | 2 KB | 4 KB |
| Automotive Qualification | AEC-Q100 (-40°C to +125°C) | AEC-Q100 | AEC-Q100 | AEC-Q100 | AEC-Q100 | AEC-Q100 | AEC-Q100 |
| Connectivity | CAN, I²C, SCI, SPI | CAN, I²C, SCI, SPI | CAN, I²C, SCI, SPI | CAN, I²C, SCI, SPI | CAN, I²C, SCI, SPI | CAN, I²C, SCI, SPI | CAN, I²C, SCI, SPI |
Diferensiator Kunci
- Higher Flash density than the lower-cost MC9S12DT128MPVE (vsMC9S12DT128MPVE)
- Active NXP production status, not legacy Freescale part (vsMC9S12DG256BVPV (Freescale-prefix legacy))
- Larger 4KB EEPROM than 128KB Flash sibling (vsMC9S12E64MPVE)
Catatan Desain
Estimated: the S9S12DG25F0MPVE has separate analog (VDDA/VSSA) and digital (VDD/VSS) supply pins that must be decoupled with 100nF ceramic capacitors placed within 5 mm of each pin pair. The internal voltage regulator (VDDR) requires a 47nF bypass capacitor. Bulk 4.7uF-10uF tantalum or ceramic decoupling at the board's power inlet is recommended for automotive load-dump resilience. The analog supply should be filtered from the digital supply through a ferrite bead to minimize ADC noise. Failure to isolate VDDA from digital noise can degrade the 10-bit ADC performance below the datasheet's 1 LSB integral-nonlinearity target.
Keep the PLL filter capacitor (XFC pin) trace shorter than 10 mm and the surrounding ground pour intact to maintain PLL jitter below 1%. The BKGD and RESET pins should each have their own pull-up resistor (4.7 kohm typical) with the RESET pin receiving a 1 nF decoupling capacitor for noise filtering. The 112-LQFP package has a 0.65 mm pitch and 20x20 mm body, requiring 4-layer PCB stack-up for high-speed signal integrity. Route CAN and SPI signals over a continuous ground reference for characteristic-impedance control.
Do not confuse the S9S12DG25F0MPVE (256KB Flash) with the MC9S12DG128MPV (128KB Flash) - they share the same package and pinout but the firmware memory map differs. The S-prefix (S9S12...) denotes the current active NXP production part; older M-prefix (MC9S12...) may be NXP/Freescale legacy stock. When migrating from the M-prefix version, verify the BDM debug connector pinout and the EEPROM size, which may differ across lifecycle revisions. Always request the latest revision letter from the manufacturer when ordering long-life production runs.
Estimated: the 112-LQFP package has a junction-to-ambient thermal resistance theta_JA of approximately 45 C/W (still-air, 1 oz copper, JEDEC 4-layer test board). Under sustained load (for example, all GPIO toggling with peripherals active at 25MHz), the MCU can dissipate approximately 1 W. At +85°C ambient, the resulting +45°C rise keeps the junction below +130°C - just inside the +125°C storage and +150°C junction maximum. Designing for natural convection and a minimum 100 cm² ground copper pour gives margin for the AEC-Q100 thermal-cycling profile.
The S9S12DG25F0MPVE's CAN module requires external ESD protection and a CAN transceiver (e.g., TJA1050 or TJA1042) for bus isolation - the internal peripheral handles only the protocol, not the physical-layer voltages. When using the enhanced capture timer for input-capture applications, ensure the input signal bandwidth does not exceed one quarter of the bus frequency to avoid aliasing. PWM outputs cannot drive high-current loads directly - use external gate drivers or FETs for motor-control or lighting applications.
Informasi Konformitas
AEC-Q100 automotive-qualified per NXP product page. RoHS compliant. Lead-free finish per NXP datasheet.
