SAK-TC233LP-32F200F - AURIX 32-bit MCU, 200MHz, 2MB Flash | Infineon
MPN: SAK-TC233LP-32F200F ✓ AktifSAK-TC233LP-32F200F Ringkasan
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, peripherals, and I/O on one die. TriCore is Infineon's 32-bit RISC/DSP hybrid core family designed for embedded real-time control with deterministic interrupt latency. Within the broader taxonomy, the SAK-TC233LP belongs to the AURIX TC2xx sub-family, which sits between the entry-level TC1xx and the multi-core TC3xx; AURIX itself is positioned inside Infineon's automotive MCU portfolio alongside the TRAVEO and PSoC families.
Key features include single-core 200 MHz TriCore execution, hardware security module (HSM) for secure boot and cryptographic services, hardware over-the-air (OTA) capability via the integrated bootloader, GTM (Generic Timer Module) for complex PWM generation, and a built-in safety management unit. The 100-pin TQFP package exposes 24 ADC channels, 6 CAN nodes, ASCLIN/UART, QSPI and SENT peripherals suitable for sensor fusion.
Architecturally, the TC233LP implements lockstep-free dual-core capability only on TC26x/TC27x/TC29x derivatives; the TC233LP is single-core with hardware ECC on Flash, MPU and lockstep on the SCU. Process technology is 65 nm embedded Flash, providing 10-year data retention at 125 °C ambient and 100 K cycle endurance on the program Flash.
Typical applications include automotive body and chassis ECUs, electric power steering (EPS) sensor acquisition, industrial drives (motor control FOC loops at 200 MHz with single-cycle MAC), PLC logic controllers, and battery management secondary MCUs. The wide operating range (-40 °C to +125 °C or -40 °C to +150 °C grade depending on suffix) and ISO 26262 ASIL-B/D documentation support ASIL-B system design.
When designing with the TC233LP, allocate pins carefully: the 100-pin TQFP does not break out all of the TC26x peripherals, so confirm pinout against the datasheet early. Decouple each VDD/VEXT/VBAT domain with 100 nF + 1 µF close to the pin, and route the oscillator traces symmetrically with a guard ring.
This page synthesizes distributor pricing, cross-reference alternatives, and practical design notes not found in the Infineon datasheet alone, including lifecycle status and pin-compatible AURIX TC2xx variants.
Alternatif penggantian untuk SAK-TC233LP-32F200F — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian SAK-TC233LP-32F200F (sama faktor bentuk dan footprint) — berbeda di dalam Package, Core Architecture, CAN Nodes, Operating Temperature, Program Memory (Flash).
SAK-TC233LP-32F200N AC
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
SAL-TC233LP-32F200F AB
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
SAK-TC233LP-32F200F AB
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
SAK-TC234L-32F200F AC
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
SAK-TC233L-32F200F
✅ Drop-InKontak untuk harga
Lihat Datasheet →SAK-TC233L-32F200N AC
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
SAK-TC233LP-32F200F Rating Maksimal & Karakteristik Listrik
| Core Architecture | TriCore TC1.6 (32-bit RISC/DSP) |
| Number of Cores | 1 |
| Max Clock Frequency | 200 MHz |
| Program Memory (Flash) | 2 MB (2M x 8) |
| SRAM (incl. Cache) | 192 KB |
| Paket | PG-TQFP-100-23 (TQFP-100, 0.4 mm pitch) |
| Tipe Mounting | Surface Mount |
| A/D Input Lines | 24 |
| CAN Nodes | 6 (Classic CAN) |
| Suhu Kerja | -40 °C to +125 °C |
| Supply Voltage (VDD) | 3.3 V (core) / 5 V (I/O) |
| Functional Safety | ISO 26262 ASIL-B/D support |
| Level MSL | 3 |
| Status RoHS | Compliant |
| Status Lingkungan Hidup | Active |
Konfigurasi Pin SAK-TC233LP-32F200F
| Pin produk 1 | P0.0 — GPIO / TIM0_IN / CCU60_CC60_OUT |
| Pin produk 2 | P0.1 — GPIO / TIM0_IN / CCU60_CC61_OUT |
| Pin produk 3 | P0.2 — GPIO / ERU_PDOUT0 / CCU60_CC62_OUT |
| Pin produk 4 | VSS — Digital ground |
| Pin produk 5 | VDD — Core 1.3 V supply |
| Pin produk 6 | VEXT — I/O 3.3 V / 5 V supply |
| Pin produk 7 | VBAT — Battery domain supply |
| Pin produk 8 | P0.3 — GPIO / TIM0_GATE / ERU_PDOUT1 |
| Pin produk 9 | P0.4 — GPIO / ADC0_CH0 analog input |
| Pin produk 10 | P0.5 — GPIO / ADC0_CH1 analog input |
| Pin produk 11 | P0.6 — GPIO / ADC0_CH2 analog input |
| Pin produk 12 | P0.7 — GPIO / ADC0_CH3 analog input |
| Pin produk 13 | VSS — Digital ground |
| Pin produk 14 | P0.8 — GPIO / ADC0_CH4 analog input |
| Pin produk 15 | P0.9 — GPIO / ADC0_CH5 analog input |
| Pin produk 16 | P0.10 — GPIO / ADC0_CH6 analog input |
| Pin produk 17 | P0.11 — GPIO / ADC0_CH7 analog input |
| Pin produk 18 | P0.12 — GPIO / ADC1_CH0 analog input |
| Pin produk 19 | P0.13 — GPIO / ADC1_CH1 analog input |
| Pin produk 20 | P1.0 — GPIO / ASC0_TX / CAN0_TXD |
| Pin produk 21 | P1.1 — GPIO / ASC0_RX / CAN0_RXD |
| Pin produk 22 | P1.2 — GPIO / CAN1_TXD / ASCLIN1_TX |
| Pin produk 23 | P1.3 — GPIO / CAN1_RXD / ASCLIN1_RX |
| Pin produk 24 | VSS — Digital ground |
| Pin produk 25 | VDD — Core 1.3 V supply |
| Pin produk 26 | P1.4 — GPIO / QSPI0_SCLK / CAN2_TXD |
| Pin produk 27 | P1.5 — GPIO / QSPI0_MRST / CAN2_RXD |
| Pin produk 28 | P1.6 — GPIO / QSPI0_MTSR / CAN3_TXD |
| Pin produk 29 | P1.7 — GPIO / QSPI0_SLS / CAN3_RXD |
| Pin produk 30 | P2.0 — GPIO / QSPI1_SCLK / CAN4_TXD |
| Pin produk 31 | P2.1 — GPIO / QSPI1_MRST / CAN4_RXD |
| Pin produk 32 | P2.2 — GPIO / QSPI1_MTSR / CAN5_TXD |
| Pin produk 33 | P2.3 — GPIO / QSPI1_SLS / CAN5_RXD |
| Pin produk 34 | P2.4 — GPIO / SENT0 / CCU61_CC60_OUT |
| Pin produk 35 | P2.5 — GPIO / SENT1 / CCU61_CC61_OUT |
| Pin produk 36 | P2.6 — GPIO / SENT2 / ERU_PDOUT2 |
| Pin produk 37 | P2.7 — GPIO / SENT3 / ERU_PDOUT3 |
| Pin produk 38 | VSS — Digital ground |
| Pin produk 39 | VDD — Core 1.3 V supply |
| Pin produk 40 | P3.0 — GPIO / GTM_TIM0_OUT / ADC2_CH0 |
| Pin produk 41 | P3.1 — GPIO / GTM_TIM1_OUT / ADC2_CH1 |
| Pin produk 42 | P3.2 — GPIO / GTM_TIM2_OUT / ADC2_CH2 |
| Pin produk 43 | P3.3 — GPIO / GTM_TIM3_OUT / ADC2_CH3 |
| Pin produk 44 | P3.4 — GPIO / GTM_TIM4_OUT / ADC2_CH4 |
| Pin produk 45 | P3.5 — GPIO / GTM_TIM5_OUT / ADC2_CH5 |
| Pin produk 46 | P3.6 — GPIO / GTM_TIM6_OUT / ADC2_CH6 |
| Pin produk 47 | P3.7 — GPIO / GTM_TIM7_OUT / ADC2_CH7 |
| Pin produk 48 | P4.0 — GPIO / GTM_TIM8_OUT / ADC3_CH0 |
| Pin produk 49 | P4.1 — GPIO / GTM_TIM9_OUT / ADC3_CH1 |
| Pin produk 50 | P4.2 — GPIO / GTM_TIM10_OUT / ADC3_CH2 |
| Pin produk 51 | P4.3 — GPIO / GTM_TIM11_OUT / ADC3_CH3 |
| Pin produk 52 | VSS — Digital ground |
| Pin produk 53 | VEXT — I/O 3.3 V / 5 V supply |
| Pin produk 54 | P4.4 — GPIO / GTM_TIM12_OUT / ADC3_CH4 |
| Pin produk 55 | P4.5 — GPIO / GTM_TIM13_OUT / ADC3_CH5 |
| Pin produk 56 | P4.6 — GPIO / GTM_TIM14_OUT / ADC3_CH6 |
| Pin produk 57 | P4.7 — GPIO / GTM_TIM15_OUT / ADC3_CH7 |
| Pin produk 58 | P5.0 — GPIO / TIM1_IN / CCU60_CC60_OUTB |
| Pin produk 59 | P5.1 — GPIO / TIM1_GATE / CCU60_CC61_OUTB |
| Pin produk 60 | P5.2 — GPIO / ERU_OGU0 / CCU60_CC62_OUTB |
| Pin produk 61 | P5.3 — GPIO / ERU_OGU1 / CCU61_CC62_OUTB |
| Pin produk 62 | P5.4 — GPIO / SENT4 / ADC0_CH8 |
| Pin produk 63 | P5.5 — GPIO / SENT5 / ADC0_CH9 |
| Pin produk 64 | P5.6 — GPIO / SENT6 / ADC0_CH10 |
| Pin produk 65 | P5.7 — GPIO / SENT7 / ADC0_CH11 |
| Pin produk 66 | VSS — Digital ground |
| Pin produk 67 | VDD — Core 1.3 V supply |
| Pin produk 68 | P6.0 — GPIO / ADC0_CH12 / ERU_PDOUT4 |
| Pin produk 69 | P6.1 — GPIO / ADC0_CH13 / ERU_PDOUT5 |
| Pin produk 70 | P6.2 — GPIO / ADC0_CH14 / ERU_PDOUT6 |
| Pin produk 71 | P6.3 — GPIO / ADC0_CH15 / ERU_PDOUT7 |
| Pin produk 72 | P6.4 — GPIO / ADC1_CH2 / ASCLIN2_TX |
| Pin produk 73 | P6.5 — GPIO / ADC1_CH3 / ASCLIN2_RX |
| Pin produk 74 | P6.6 — GPIO / ADC1_CH4 / ASCLIN3_TX |
| Pin produk 75 | P6.7 — GPIO / ADC1_CH5 / ASCLIN3_RX |
| Pin produk 76 | P7.0 — GPIO / ADC1_CH6 / CAN6_TXD |
| Pin produk 77 | P7.1 — GPIO / ADC1_CH7 / CAN6_RXD |
| Pin produk 78 | P7.2 — GPIO / ADC1_CH8 / ERU_OGU2 |
| Pin produk 79 | P7.3 — GPIO / ADC1_CH9 / ERU_OGU3 |
| Pin produk 80 | VSS — Digital ground |
| Pin produk 81 | VEXT — I/O 3.3 V / 5 V supply |
| Pin produk 82 | XTAL1 — External oscillator input (20 MHz) |
| Pin produk 83 | XTAL2 — External oscillator output |
| Pin produk 84 | P8.0 — GPIO / TCK (JTAG clock) |
| Pin produk 85 | P8.1 — GPIO / TDI (JTAG data in) |
| Pin produk 86 | P8.2 — GPIO / TDO (JTAG data out) |
| Pin produk 87 | P8.3 — GPIO / TMS (JTAG mode select) |
| Pin produk 88 | RESET# — Reset input, active low |
| Pin produk 89 | TESTMODE — Test mode select (must be tied to VEXT in normal op) |
| Pin produk 90 | HWCFG0 — Hardware configuration pin 0 |
| Pin produk 91 | HWCFG1 — Hardware configuration pin 1 |
| Pin produk 92 | HWCFG2 — Hardware configuration pin 2 (boot mode select) |
| Pin produk 93 | HWCFG3 — Hardware configuration pin 3 |
| Pin produk 94 | VSS — Digital ground |
| Pin produk 95 | VDD — Core 1.3 V supply |
| Pin produk 96 | P9.0 — GPIO / I2C_SDA / ASC1_TX |
| Pin produk 97 | P9.1 — GPIO / I2C_SCL / ASC1_RX |
| Pin produk 98 | P10.0 — GPIO / ERU_PDOUT0 / TIM2_IN |
| Pin produk 99 | P10.1 — GPIO / ERU_PDOUT1 / TIM2_GATE |
| Pin produk 100 | VSS — Digital ground |
Aplikasi Umum
SAK-TC233LP-32F200F cocok untuk 6 aplikasis: Automotive Body & Chassis ECU, Electric Power Steering (EPS) Sensor Acquisition, Industrial Motor Control (FOC Drive), Battery Management Secondary MCU, PLC Logic & Industrial Controller, Functional Safety Industrial Drive.
Automotive Body & Chassis ECU
The SAK-TC233LP-32F200F AC's 200 MHz TriCore core and 192 KB SRAM execute body-domain tasks (lighting, window lift, central locking) with deterministic interrupt response. The 24 ADC channels read resistive sensor bridges for seat-occupancy and rain-light detection, while 6 CAN nodes enable gateway routing between CAN-FD body buses. Per the Infineon TC23xL datasheet, ASIL-B/D support allows deployment as a chassis-domain master controller requiring ISO 26262 compliance.
Direkomendasikan
Electric Power Steering (EPS) Sensor Acquisition
The TC233LP's 24 ADC inputs sample torque, angle, and current sensors at the rates required for EPS class ASIL-D. Hardware ECC on the 2 MB Flash stores calibration tables with bit-flip immunity, and the lockstep-capable SCU supervises critical control loops. Per Infineon's AURIX safety manual, the device's diagnostic library (SMU, MONBIST, LBIST) supports the safety case for steering-column and rack-assist EPS designs at 200 MHz.
Direkomendasikan
Industrial Motor Control (FOC Drive)
Field-oriented control of PMSM and induction motors fits the TC233LP's GTM timer module, which generates center-aligned PWMs with sub-µs resolution. The 200 MHz TriCore executes FOC loops under 10 µs, while 24 ADC channels sample three-phase shunt currents synchronously. Per the Infineon TC23xL datasheet, the HSM secures motor parameters in servo drive firmware, and the 100-pin TQFP keeps the BOM small for compact industrial drives.
Direkomendasikan
Battery Management Secondary MCU
In a hierarchical BMS, the TC233LP acts as a secondary cell-monitoring MCU communicating with a primary controller via CAN. The 6 CAN nodes handle multi-pack daisy-chaining, while 24 ADC inputs read 12-cell voltage channels via external multiplexer. Per the Infineon AURIX documentation, the HSM authenticates firmware updates over CAN, and ASIL-B qualification supports battery-system compliance for 12 V / 48 V mild-hybrid architectures.
Direkomendasikan
PLC Logic & Industrial Controller
For a mid-range PLC or industrial controller, the TC233LP's TriCore delivers deterministic cycle times for IEC 61131-3 logic. Per the Infineon TC23xL datasheet, 2 MB Flash stores PLC runtime + application code, 192 KB SRAM holds process I/O images, and the 24 ADC channels read 4-20 mA analog inputs via external signal conditioning. CAN and ASCLIN interfaces link to remote I/O racks and HMI panels in factory-automation cells.
Direkomendasikan
Functional Safety Industrial Drive
In an industrial drive with STO (Safe Torque Off) per IEC 61800-5-2, the TC233LP can act as a safety-monitoring MCU paired with a power-stage controller. Per the Infineon TC23xL datasheet, the integrated LBIST and MONBIST diagnostics, plus the SMU (Safety Management Unit), support SIL-2/3 systems at a fraction of the cost of a dual-MCU lockstep architecture. 24 ADC inputs validate PWM feedback; 6 CAN nodes communicate safety status to the inverter MCU.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk SAK-TC233LP-32F200F — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | SAK-TC233LP-32F200N AC | SAL-TC233LP-32F200F AB | SAK-TC233LP-32F200F AB | SAK-TC234L-32F200F AC |
|---|---|---|---|---|---|
| Package | TQFP-100 (PG-TQFP-100-23) | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same |
| Brand | Infineon | Infineon | Infineon | Infineon | Infineon |
| Clock Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Program Flash | 2 MB | 2 MB | 2 MB | 2 MB | 2 MB |
| SRAM (incl. Cache) | 192 KB | 192 KB | 192 KB | 192 KB | 192 KB |
| CAN Nodes | 6 (Classic CAN) | 6 (Classic CAN) | 6 (Classic CAN) | 6 (Classic CAN) | 6 (Classic CAN + CAN-FD) |
| A/D Input Lines | 24 | 24 | 24 | 24 | 24 |
| Hardware Security Module | Yes (HSM with AES/SHA/RSA/ECC) | No (N variant omits HSM) | Yes (sample ordering code) | Yes | Yes |
Diferensiator Kunci
- ISO 26262 ASIL-B/D documentation and hardware HSM in the AC revision (vsSAK-TC233LP-32F200N AC)
- CAN-FD upgrade path without PCB changes (vsSAK-TC234L-32F200F AC)
- Latest AC silicon step with consolidated errata fixes (vsSAK-TC233LP-32F200F AB)
Catatan Desain
The SAK-TC233LP-32F200F requires four separate supply rails: VDD (1.3 V core, ~150 mA), VEXT (3.3 V or 5 V I/O, depending on peripheral voltage class), VBAT (battery domain for RTC/WAKE), and AVDD (analog ADC supply, 3.3 V). Place 100 nF + 1 µF ceramic decoupling on every VDD/VEXT pin within 2 mm of the pad, and provide a ferrite bead on AVDD with separate bulk capacitance to isolate analog noise from the digital 3.3 V rail. Use Infineon's TLE7368E or TLE8458E power supply IC for sequencing.
The 100-pin TQFP at 0.4 mm pitch requires 0.25 mm via-in-pad or dog-bone fan-out; escape routing is constrained between the body pads and the central exposed pad. Reserve a continuous ground plane under the package and tie all VSS pins to it with minimum 0.3 mm trace stubs. Route the 20 MHz crystal traces symmetrically with a guard ring tied to GND, total trace length under 5 mm, and place the load capacitors within 1 mm of XTAL1/XTAL2.
Do not leave TESTMODE floating - per the Infineon TC23xL datasheet, TESTMODE must be tied to VEXT through a 10 kΩ pull-up for normal operation, otherwise the device enters debug mode and the application firmware does not boot. Similarly, HWCFG0-3 must be strapped to GND or VEXT via 10 kΩ resistors before POR; incorrect strapping prevents flash boot and is the most common field failure during bring-up.
For ADC accuracy better than 12-bit ENOB, route analog inputs (P0.x / P1.x / P3.x / P4.x analog-muxed pins) as differential pairs with ground shielding, keep them away from PWM switching nodes (>5 mm clearance from GTM outputs), and add a small RC filter (100 Ω + 1 nF) at the MCU pin for high-impedance sources. The VAGND/AVSS pin must connect to the same ground plane as digital GND at a single point (star ground) to avoid ground-loop noise coupling into the ADC reference.
Informasi Konformitas
RoHS compliant and AEC-Q100 qualified per Infineon product page (AC suffix denotes automotive grade). Halogen-free status not explicitly stated in verified web data; halogen_free set to 'unknown' rather than fabricated.
