Skyworks Solutions

SI3010-F-FS 2.4 kbps Line-Side DAA | Skyworks

MPN: SI3010-F-FS ✓ Aktif
MOQ: 1 |

SI3010-F-FS Ringkasan

Skyworks Solutions SI3010-F-FS is a direct access arrangement interface IC designed as the line-side DAA for the Si2404 ISOmodem platform. It supports 2400 bps data operation with a 3 V supply and is associated with a 16-pin SOIC package in distributor and cross-reference listings. The SI3010-F-FS is intended for telephone-line interface designs that require a dedicated DAA alongside the modem DSP and line-driver circuitry.

A direct access arrangement, or DAA, is the telephone-network-facing interface that isolates the modem electronics from the analog telephone line. In a complete ISOmodem design, the DAA handles line-side signaling and protection while the companion modem IC performs data modulation and demodulation. This division allows a compact, globally programmable telephone-line interface to be paired with the appropriate Silicon Labs modem family member.

The documented SI3010 feature set covers modem formats including ITU-T and Bell rates from 300 bps through 56 kbps, V.21, V.22, V.29, Fast Connect, V.44, V.42, V.42bis, and MNP2-5. It also supports automatic rate negotiation and Type I and Type II caller-ID decoding. These capabilities apply to the shared Si2457, Si2454, Si2415, and Si2404 ISOmodem documentation identified for the component.

The SI3010 is built for 3 V operation and is listed with a 0 °C to 70 °C commercial temperature range. It belongs to the telecom-interface IC category and uses surface-mount SOIC construction, allowing conventional reflow assembly and automated inspection. Because a DAA is connected directly to an analog telephone line, its surrounding protection, isolation, filtering, and ring-detection circuitry are as important as the IC itself.

Typical implementations include Si2404-based voice and data modems, embedded fax or data systems, caller-ID equipment, and industrial telephone-line interfaces. The Si2457, Si2454, Si2415, and Si2401 devices provide practical companion choices when a complete two-chip ISOmodem system is required rather than the DAA alone.

Designers should preserve the separation between telephone-line and logic domains, validate the external protection network, and confirm the companion modem’s recommended hook-state, ring-detection, and line-driver circuitry. The manufacturer datasheet should be used for the exact pin assignments, absolute maximum ratings, timing, and reference circuit because the line-side interface is sensitive to component values and printed-circuit-board layout.

This page combines the verified MPN, package and interface information with drop-in comparison guidance, design notes, application fit, and practical sourcing questions. It is intended to help engineers identify the correct line-side DAA and plan a robust ISOmodem-based telephone interface.

Alternatif penggantian untuk SI3010-F-FS — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian SI3010-F-FS (sama faktor bentuk dan footprint) — berbeda di dalam Lifecycle Status, Mounting Type, Product Type.

Silicon Labs
Lifecycle Status: Active
Mounting Type: SMD (surface mount)
Product Type: Direct Access Arrangement (DAA) for an ISOmodem
Bandingkan dengan SI3010-F-FS →
Silicon Labs
Lifecycle Status: Obsolete
Mounting Type: Surface mount
Product Type: Direct Access Arrangement (DAA) telecom interface IC
Bandingkan dengan SI3010-F-FS →

SI3010-F-FSR

✅ Drop-In
📦 16-pin SOIC
Same 2.4 kbps, 3 V DAA function and 16-pin SOIC footprint; ordering suffix differs, with 0% documented change in rated data rate or supply voltage

📋 Alternatif referensi (tidak dalam katalog)

SI3010-FS

✅ Drop-In
Silicon Labs
📦 16-pin SOIC
Direct Access Arrangement (DAA) for an ISOmodem · 2.4 kbps · V.22bis ISOMODEM · 3 V to 3.6 V · 0°C to 70°C · 16-pin SOIC · SMD (surface mount) · Reel (TR)

Kontak untuk harga

Lihat Datasheet →

SI3010-F-FS-R

✅ Drop-In
📦 16-pin SOIC
Same SI3010-F-FS electrical designation with an added ordering suffix; no change to the documented 3 V supply or 2.4 kbps DAA operation is identified

📋 Alternatif referensi (tidak dalam katalog)

SI3010-F-FS Spesifikasi

Tidak ada spesifikasi tersedia

SI3010-F-FS standard Diamant Konfigurasi Panduan

Konfigurasi pin untuk SI3010-F-FS (standard pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai standard untuk SI3010-F-FS

Tidak ada data diatribut pin yang tersedia untuk SI3010-F-FS.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

SI3010-F-FS cocok untuk 6 aplikasis: Si2404 Voice and Data Modem, Caller-ID Telephone Equipment, Industrial Telephone-Line Data Terminal, Embedded Fax and Data Terminal, Legacy Telephone Network Gateway, Remote Monitoring and Telemetry Link.

📞

Si2404 Voice and Data Modem

The SI3010-F-FS fits the line-side portion of an Si2404 ISOmodem because it is specifically identified as the direct access arrangement for that platform. Operating from a 3 V rail at 2400 bps, it provides the telephone-network interface while the companion modem handles modulation and demodulation. The documented ISOmodem feature set includes automatic rate negotiation, ITU-T and Bell formats from 300 bps to 56 kbps, and Type I and Type II caller-ID decoding. Designers should reproduce the manufacturer reference network and validate the external protection, ring-detection, and hook-state components against the final line configuration.

📞

Caller-ID Telephone Equipment

The SI3010-F-FS is appropriate for caller-ID products that require Type I and Type II caller-ID decoding alongside ordinary telephone-line modem operation. Its 3 V supply and 2400 bps DAA function support compact line-interface implementations, while automatic rate negotiation helps negotiate supported modem rates. The IC is normally paired with a Si2404-class modem rather than used as a standalone data modem. In a finished product, firmware, hook-state logic, ring detection, and the line protection network must be validated together to obtain reliable caller-ID operation across the intended telephone networks.

🏭

Industrial Telephone-Line Data Terminal

A remote monitoring terminal requiring a telephone-line connection can use the SI3010-F-FS as the line-side interface for a Si2404-based modem path. The 3 V DAA supports the associated 2400 bps operating mode and shares documentation covering V.21, V.22, V.29, Fast Connect, V.44, V.42, V.42bis, and MNP2-5 formats. This makes it useful where legacy analog infrastructure must be retained. Industrial deployments should include reviewed surge protection, isolation boundaries, controlled ring and hook behavior, and environmental testing across the device's documented 0 °C to +70 °C operating range.

🖨️

Embedded Fax and Data Terminal

The SI3010-F-FS can provide the telephone-line interface in an embedded fax or low-speed data terminal that uses the Si2404 ISOmodem architecture. At 3 V and 2400 bps, it complements the modem chipset while supporting the broader format set documented for the shared ISOmodem family. The compact 16-pin SOIC package supports surface-mount assembly, but analog telephone-line designs still require careful separation of external protection components from sensitive logic. Confirm the exact pin functions and reference values in the manufacturer datasheet before adapting an existing board, particularly when changing among SI3010 ordering suffixes.

🌐

Legacy Telephone Network Gateway

The SI3010-F-FS can serve as the line-side DAA in a gateway that bridges legacy analog telephone lines and an embedded digital controller. The DAA's 2400 bps operating mode and automatic rate negotiation are suitable for basic control or supervisory links, while the associated documentation covers Bell and ITU-T formats plus caller-ID decoding. A robust gateway must preserve the analog isolation and protection architecture specified by the reference design. System-level validation should cover ring cadence, line seizure and release, caller-ID timing, noise immunity, and behavior across the documented 0 °C to +70 °C temperature range.

📡

Remote Monitoring and Telemetry Link

Remote telemetry equipment that must communicate over an analog telephone line can use the SI3010-F-FS with the Si2404 modem to create a compact 2400 bps connection. The DAA's 3 V operation reduces the number of supply rails required around the modem, while automatic rate negotiation can improve connection setup behavior. This application is especially relevant to sites without modern network connectivity. The external line interface remains the critical design area: use the manufacturer reference network, maintain the intended isolation geometry, verify protection-component ratings, and test connection establishment and data integrity under varying line conditions.

Ringkasan Produk Direkomendasikan

Si2404 Companion ISOmodem specified for the SI3010-F-FS Digunakan di dalam: Si2404 Voice and Data Modem, Caller-ID Telephone Equipment, Industrial Telephone-Line Data Terminal, Embedded Fax and Data Terminal, Legacy Telephone Network Gateway, Remote Monitoring and Telemetry Link Si2415 ISOmodem family member covered by the associated documentation Digunakan di dalam: Si2404 Voice and Data Modem, Embedded Fax and Data Terminal Si2454 ISOmodem family member covered by the associated documentation Digunakan di dalam: Si2404 Voice and Data Modem, Industrial Telephone-Line Data Terminal Si2401 2400 bps ISOmodem family option Digunakan di dalam: Caller-ID Telephone Equipment, Remote Monitoring and Telemetry Link Si2457 Related ISOmodem family member Digunakan di dalam: Legacy Telephone Network Gateway
What is the SI3010-F-FS?
The SI3010-F-FS is a Skyworks Solutions line-side direct access arrangement, or DAA, intended for the Si2404 ISOmodem. It operates at 3 V and is listed in a 16-pin SOIC package. The manufacturer documentation for the associated Si2457, Si2454, Si2415, and Si2404 family also identifies support for ITU-T and Bell modem formats, automatic rate negotiation, and Type I and Type II caller-ID decoding.
Where can I download the SI3010-F-FS datasheet PDF?
The SI3010-F-FS datasheet is available through the manufacturer-linked document listing at https://www.alldatasheet.com/datasheet-pdf/pdf/1706561/SKYWORKS/SI3010-F-FS.html. The document applies to the Si2457, Si2454, Si2415, and Si2404 ISOmodem family and covers supported modem formats, automatic rate negotiation, and caller-ID decoding. Use its pin-description and reference-circuit sections when assigning connections and external line-interface components.
What is the SI3010-F-FS pinout and package?
The SI3010-F-FS is listed in a 16-pin SOIC package, although the search excerpts do not expose the individual pin names or numbering. Consult the manufacturer datasheet pin table before assigning PCB tracks or checking continuity. The package footprint, exposed-pad arrangement, and pin numbering must be verified directly against the purchased ordering code rather than inferred from a related SI3010 variant.
What modem data rates does the SI3010-F-FS support?
The associated SI3010 documentation identifies ITU-T and Bell formats from 300 bps up to 56 kbps. It lists V.21, V.22, V.29, Fast Connect, V.44, V.42, V.42bis, and MNP2-5, together with automatic rate negotiation. The device is also associated with 2400 bps operation when used as the line-side DAA for an Si2404 ISOmodem.
Where can I buy SI3010-F-FS online?
Use the Request a Quote form on this page to request SI3010-F-FS availability, order quantities, and a current quotation. The MPN is identified by Skyworks Solutions and is listed for telecom-interface applications. A request through the form lets the purchasing team confirm the exact 16-pin SOIC ordering suffix, current inventory, and shipment status before an order is placed.
What is the price of SI3010-F-FS?
Current pricing for the SI3010-F-FS is obtained through the Request a Quote form on this page because commercial conditions and availability can change. The product is identified as a 3 V, 2.4 kbps line-side DAA in a 16-pin SOIC package. Submit the exact MPN and required quantities so the quote can reflect the correct ordering suffix, tube quantity, and delivery schedule.
What is the lead time for SI3010-F-FS?
The current lead time for SI3010-F-FS should be confirmed through the Request a Quote form on this page. A product-series listing shows a 16-week lead-time indication, but current manufacturing and inventory status may vary by order quantity. Request a written quotation with the required quantity, delivery date, and packaging preference before committing the component to a production schedule.
Is SI3010-F-FS in stock?
Availability for SI3010-F-FS should be confirmed through the Request a Quote form on this page. One distributor result identifies a related SI3010-FS listing as stocked, while the series listing describes SI3010-F-FS with a 16-week lead-time indication. Because the ordering suffixes differ, the purchasing team should submit SI3010-F-FS exactly and obtain a stock confirmation for that MPN.
What can replace the SI3010-F-FS?
The SI3010-F-FSR is the closest documented drop-in candidate because its 16-pin SOIC package, 2.4 kbps DAA function, 3 V operation, and principal functional characteristics are described as consistent with SI3010-F-FS. Its availability and exact ordering suffix should still be checked. The SI3010-FS and SI3010-F-FS-R also appear in related listings, but their package and ordering details require confirmation before substitution.
Is the SI3010-F-FS the same as the SI3010-F-FSR?
The SI3010-F-FSR is presented as a direct replacement for the SI3010-F-FS, with consistent terminals, package, and functional characteristics. Both are 2.4 kbps, 3 V direct access arrangements associated with a 16-pin SOIC package. The principal difference is the ordering suffix, which can indicate packaging or reel configuration, so engineers should confirm the manufacturer ordering guide before treating the parts as fully interchangeable.
SI3010-F-FS vs SI3010-F-FSR — which is better for an Si2404 design?
The SI3010-F-FSR is the stronger replacement candidate for an Si2404-based design because a comparison identifies it as a complete, pin-compatible replacement with consistent package and functional characteristics. Both devices are listed as 2.4 kbps, 3 V DAAs in 16-pin SOIC packages. The correct choice ultimately depends on the required ordering and shipping format, so confirm the suffix against the current manufacturer ordering information.
When should I choose SI3010-F-FS instead of SI3010-F-FSR?
Choose the SI3010-F-FS when it matches the exact Si2404 ISOmodem reference design, required tube or reel format, and released production configuration. Choose the SI3010-F-FSR when it is the available ordering configuration and its pinout has been confirmed against the target design. Both are documented as 2.4 kbps, 3 V, 16-pin SOIC DAAs, but suffix-specific ordering rules can still control interchangeability.
Is the SI3010-F-FS suitable for caller-ID telephone equipment?
Yes, the SI3010-F-FS is suitable for telephone equipment requiring Type I and Type II caller-ID decoding when used with the associated ISOmodem platform. The documented feature set also includes automatic rate negotiation and multiple ITU-T and Bell modem formats. Compliance with the final product's applicable regulatory requirements must still be evaluated at the complete telephone-interface and firmware level.
What are the key specifications of SI3010-F-FS that engineers should know?
The principal documented characteristics are a 3 V supply, 2400 bps DAA operation, a 16-pin SOIC package, and an operating range of 0 °C to +70 °C. The shared ISOmodem documentation also lists ITU-T and Bell formats from 300 bps to 56 kbps, automatic rate negotiation, and Type I and Type II caller-ID decoding. Exact pin functions, timing limits, and electrical maxima must be taken from the manufacturer datasheet.
What is the best Skyworks equivalent for the SI3010-F-FS?
The SI3010-F-FSR is the best-supported Skyworks equivalent because it is specifically identified as a complete drop-in replacement with matching package, terminals, and functional characteristics. It is listed as a 16-pin SOIC, 3 V, 2.4 kbps DAA. The SI3010-FS is another closely related catalog entry, but its ordering and package details should be checked against the exact target footprint before approval.

Data referensi engineering untuk SI3010-F-FS — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the SI3010-F-FS when the design specifically calls for the Skyworks 3 V, 2400 bps line-side DAA used with an Si2404 ISOmodem and its 16-pin SOIC footprint matches the PCB. The SI3010-F-FSR is the preferred substitute when procurement or availability differs, because a comparison identifies matching terminals, package, and functional characteristics. SI3010-FS and SI3010-F-FS-R are related ordering entries that may serve when their manufacturer ordering suffix confirms the required package and shipping format. Do not use SI3010-F-GS as a direct replacement because it is associated with an 8-pin SOIC rather than the SI3010-F-FS 16-pin SOIC. For every candidate, verify the pin table, exposed-pad requirements, ordering code, and reference-circuit component values before releasing a replacement to production.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini SI3010-F-FSR SI3010-FS SI3010-F-FS-R
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC
Brand Skyworks Solutions Skyworks Solutions Skyworks Solutions Skyworks Solutions
Product Type Line-side Direct Access Arrangement (DAA) Line-side Direct Access Arrangement (DAA) SI3010 line-side DAA SI3010-F-FS ordering variant
Supply Voltage 3 V 3 V 3 V 3 V

Diferensiator Kunci

  • Documented direct replacement path (vsSI3010-F-FSR)
  • Defined line-side role for Si2404 ISOmodem (vsSI3010-FS)
  • Same documented DAA operating class (vsSI3010-F-FS-R)

Catatan Desain

Treat the SI3010-F-FS telephone-line side as a sensitive analog interface. Place its protection and filtering components close to the line connector and maintain the isolation geometry used in the manufacturer reference design. Keep digital modem and control traces away from high-energy ring and surge paths. Because the search excerpts do not provide the complete pin table, verify every connection against the manufacturer datasheet before assigning PCB tracks or checking continuity.

Do not substitute the SI3010-F-GS merely because its name is similar: a comparison identifies that device with an 8-pin SOIC package, whereas SI3010-F-FS is listed as 16-pin SOIC. Pin-compatible substitutions include SI3010-F-FSR and related suffix variants, but every ordering code must still be checked against the current ordering guide. Also verify tube versus reel configuration and exposed-pad requirements before approving a replacement.

The SI3010-F-FS operates from a 3 V supply. Provide a stable 3 V rail with low impedance near the device and decouple according to the manufacturer reference circuit. Avoid routing telephone-side surge current through digital return paths, and verify the power-supply startup sequence against hook-state and reset requirements. The available excerpts do not state absolute maximum voltage, current consumption, or decoupling values, so those figures must be taken directly from the datasheet.

Validate hook-state, ring detection, and caller-ID timing in the complete modem system rather than treating them as isolated digital signals. Use the reference values and ringing network shown in the associated Si2457, Si2454, Si2415, and Si2404 documentation. Confirm whether the selected companion modem requires a particular line-side DAA ordering suffix, since firmware assumptions and suffix-specific ordering rules can affect otherwise similar boards.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The available product excerpts do not provide explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. AEC-Q100 is not applicable because the SI3010-F-FS is specified for a 0 °C to +70 °C commercial temperature range rather than as an automotive-qualified device.

Pencarian Terkait

SI3010-F-FS datasheet SI3010-F-FS pinout SI3010-F-FS datasheet pdf SI3010-F-FS equivalent SI3010-F-FS replacement SI3010-F-FS cross reference SI3010-F-FS vs SI3010-F-FSR Skyworks SI3010-F-FS SI3010-F-FS 16-SOIC SI3010-F-FS price SI3010-F-FS stock SI3010-F-FS application circuit

Komponen dan Istilah Terkait

Skyworks Solutions SI3010-F-FS SI3010-F-FSR SI3010-FS SI3010-F-FS-R SI3010-F-GS Si2404 Si2401 Si2415 Si2454 Si2457 ISOmodem Direct Access Arrangement DAA line-side DAA telephone-line interface IC telecom interface IC integrated circuit semiconductor 16-pin SOIC SOIC family surface-mount package 3 V power supply 2400 bps modem automatic rate negotiation Type I caller ID Type II caller ID
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ