STMicroelectronics

STM32L451VCT6 - 80MHz Cortex-M4 MCU, 256KB Flash | STMicroelectronics

MPN: STM32L451VCT6 ✓ Aktif
100-lead LQFP, 14 x 14 mm Package 80 MHz Speed 256 KB Memory
MOQ: 1 |

STM32L451VCT6 Ringkasan

The STMicroelectronics STM32L451VCT6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with FPU, operating up to 80 MHz and providing 256 KB of Flash memory in a 100-lead LQFP package measuring 14 x 14 mm. The device also includes DFSDM capability and combines conventional MCU control with low-power operation and analog signal-processing resources. Its 100 DMIPS processing capability supports responsive control, data acquisition, and embedded user-interface workloads without requiring a separate digital signal processor.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one package. The STM32L451 belongs to the STM32L4 ultra-low-power family, where the product hierarchy is STM32L451 MCU, Arm Cortex-M4 microcontroller, 32-bit microcontroller, and embedded semiconductor. Within a system, it connects sensors, communications interfaces, analog converters, timers, and actuators while executing application firmware from its internal Flash memory.

The STM32L451VCT6 combines an 80 MHz Arm Cortex-M4 processor core with 256 KB of Flash, a hardware floating-point unit, and extensive peripheral integration. DFSDM support is particularly useful for direct sampling of sigma-delta modulators and digital microphones. The DFSDM interface, conventional timers, serial interfaces, and low-power modes allow one microcontroller to control mixed analog and digital subsystems while limiting overall board area and external component count.

Its ultra-low-power architecture is intended for systems where average energy use matters as much as peak processing performance. Low-power operating modes support battery-powered and intermittently energized equipment, while the 80 MHz operating point provides additional performance margin for control loops, communications buffering, and protocol handling. The integrated FPU accelerates floating-point calculations without requiring software emulation, helping reduce execution time in signal-processing and control applications.

Typical applications include industrial sensor nodes, low-power data loggers, building automation controllers, compact audio acquisition systems, digital microphone equipment, portable measurement instruments, and connected industrial products. A board can place the MCU between an analog front end and communications subsystem, using DFSDM for selected data paths and serial peripherals for host or network communication. Firmware can then schedule acquisition and processing tasks according to the application's duty cycle.

PCB design should preserve clean separation between sensitive analog inputs, digital interfaces, clock circuitry, and supply rails. Place decoupling capacitors close to the appropriate supply pins, route high-current and clock signals away from analog inputs, and provide continuous ground-plane paths beneath the device. Confirm pin availability, peripheral multiplexing, and boot configuration directly from the STM32L451xx datasheet before finalizing a new board or replacing an existing design.

This product page combines the manufacturer's core device characteristics, procurement-oriented component data, and practical guidance for evaluating the STM32L451VCT6 in low-power embedded systems. It also highlights same-footprint alternatives so engineers can assess feature changes, memory differences, and peripheral trade-offs before committing a design to a specific MCU variant.

Alternatif penggantian untuk STM32L451VCT6 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian STM32L451VCT6 (sama faktor bentuk dan footprint) — berbeda di dalam Package, Flash Memory, ADC, DAC, Operating Temperature.

STMicroelectronics
Package: 100-UFBGA, 7 x 7 mm
Bandingkan dengan STM32L451VCT6 →
STMicroelectronics
Package: LQFP-100 (14x14 mm)
ADC: 12-bit, 5 Msps, 16 channels
DAC: 2 x 12-bit
Bandingkan dengan STM32L451VCT6 →
STMicroelectronics
Package: WLCSP-100 (4.62 x 4.14 mm)
Flash Memory: 1 MB
ADC: 2x 12-bit, 5 Msps
Bandingkan dengan STM32L451VCT6 →

STM32L452VCT6

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
STMicroelectronics
📦 100-lead LQFP, 14 x 14 mm
ARM Cortex-M4 with FPU · 80 MHz · 256 KB · 160 KB · 1.71 V to 3.6 V · 51 · 12-bit, 5 Msps, 16 channels · 2 x 12-bit

Kontak untuk harga

Lihat Datasheet →

STM32L462VCT6

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 100-lead LQFP, 14 x 14 mm
CPU remains 80 MHz and the footprint is unchanged; higher-end connectivity features are added and individual peripheral functions may move.

📋 Alternatif referensi (tidak dalam katalog)

STM32L442VCT6

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 100-lead LQFP, 14 x 14 mm
CPU remains 80 MHz and the footprint is unchanged; the family feature set differs, including USB connectivity and variations in peripheral mapping.

📋 Alternatif referensi (tidak dalam katalog)

STM32L432VCT6

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 100-lead LQFP, 14 x 14 mm
CPU remains 80 MHz and the footprint is unchanged; this lower-feature family variant may lack some STM32L451 peripherals and DFSDM support.

📋 Alternatif referensi (tidak dalam katalog)

STM32L451VET6

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 100-lead LQFP, 14 x 14 mm
Core performance and footprint remain unchanged; Flash increases from 256 KB to 512 KB, a 100% increase, while core MCU ratings remain equivalent.

📋 Alternatif referensi (tidak dalam katalog)

STM32L451VCT6 Rating Maksimal & Karakteristik Listrik

Product Type 32-bit microcontroller
Processor Core Arm Cortex-M4
Maximum CPU Frequency 80 MHz
Flash Memory 256 KB
Flash Organization 256K x 8 bits
Maximum Performance 100 DMIPS
Floating-Point Unit Yes
Digital Filter DFSDM
Paket 100-lead LQFP, 14 x 14 mm
Tipe Mounting Surface mount

STM32L451VCT6 100-lead lqfp, 14 x 14 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk STM32L451VCT6 (100-lead lqfp, 14 x 14 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 100-lead lqfp, 14 x 14 mm untuk STM32L451VCT6

Tidak ada data diatribut pin yang tersedia untuk STM32L451VCT6.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

STM32L451VCT6 cocok untuk 6 aplikasis: Industrial Sensor Nodes, Digital Audio Acquisition, Portable Measurement Instruments, Building Automation Controllers, Battery-Powered Data Loggers, Connected Industrial Gateways.

🏭

Industrial Sensor Nodes

The STM32L451VCT6 fits compact industrial sensor nodes that periodically acquire measurements, evaluate local logic, and communicate results. Its Arm Cortex-M4 core operates up to 80 MHz, providing enough throughput for filtering and control tasks, while the ultra-low-power STM32L4 platform supports duty-cycled operation in battery- or energy-harvested installations. The 256 KB of Flash stores firmware, calibration tables, and configuration data. A typical design connects sensors through available serial or analog peripherals, uses DFSDM where the selected sensor supports it, and wakes the MCU for acquisition cycles. The principal engineering benefit is consolidating sensing, processing, and communications in one 100-lead LQFP device while reducing inactive-system energy use.

🎧

Digital Audio Acquisition

The STM32L451VCT6 is suitable for digital audio acquisition systems using DFSDM-compatible sensors. DFSDM allows a digital microphone or compatible sigma-delta modulator to provide sampled data directly to the MCU, avoiding a separate audio converter in suitable designs. The 80 MHz Cortex-M4 core can manage buffering and basic processing, while its floating-point unit accelerates arithmetic operations that would otherwise require software routines. The 256 KB of Flash is sufficient for control firmware and constrained audio-processing code. System partitioning remains important: confirm the required DFSDM channel count, data rate, clock source, and pin assignments from the manufacturer datasheet before committing the sensor and PCB layout.

📱

Portable Measurement Instruments

The STM32L451VCT6 supports portable measurement instruments that combine sensor conditioning, digital acquisition, local display control, and data logging. Its 80 MHz processing capability provides responsiveness for filtering, calibration, and control algorithms, while the hardware FPU supports efficient floating-point calculations. The ultra-low-power architecture is valuable in handheld or field instruments where dwell time between charges is limited. Designers can retain measurement data in the 256 KB of internal Flash or transfer it through an available serial interface. Supply-voltage accuracy, analog reference design, ADC performance, and low-power peripheral behavior should be reviewed against the STM32L451xx datasheet because the exact electrical limits are not summarized by the product listing.

🧩

Building Automation Controllers

The STM32L451VCT6 can serve as the central controller in a building automation node managing environmental sensors, actuator commands, and communication links. Its Cortex-M4 core runs at up to 80 MHz, allowing the firmware to handle protocol stacks, control logic, and diagnostics without a separate processor. The ultra-low-power family designation supports designs expected to spend substantial time in low-energy states. The MCU can coordinate temperature, occupancy, air-quality, and actuator interfaces while logging events locally. A practical implementation should allocate peripheral pins carefully because the 100-lead LQFP offers many I/O options but multiplexes several functions. Watchdog behavior, brownout handling, clock startup, and communication timing should be validated during fault-injection testing.

⚡

Battery-Powered Data Loggers

The STM32L451VCT6 is appropriate for battery-powered data loggers that periodically capture sensor readings and retain or transmit them. Its low-power operating architecture reduces the energy burden of long idle periods, while the 80 MHz Cortex-M4 core allows short processing bursts when data is acquired. The 256 KB of Flash can hold application firmware and a bounded local event buffer. DFSDM can reduce external conversion hardware for compatible digital sensors, while serial peripherals can provide links to storage or wireless modules. For maximum benefit, firmware should disable unused blocks, select the lowest acceptable clock rate during light work, and use peripheral event interrupts rather than continuous polling. Battery capacity, wake latency, and worst-case radio activity remain system-level constraints outside the MCU specification.

🌐

Connected Industrial Gateways

The STM32L451VCT6 can act as a local gateway processor for compact industrial equipment that aggregates sensor data, performs protocol conversion, and manages a host interface. The 80 MHz Arm Cortex-M4 core and hardware FPU provide useful throughput for packet handling and control tasks, while 256 KB of Flash accommodates a structured firmware image and protocol configuration. The 100-lead LQFP package provides a generous pin count for serial links, status indicators, and control signals in a 14 x 14 mm footprint. If the design later requires USB, STM32L452VCT6 or STM32L462VCT6 may be considered after peripheral and firmware review. For the STM32L451VCT6, Ethernet or external radios require their own circuitry and pins rather than being implied by the core specification.

What are the key specifications of STM32L451VCT6 that engineers should know?
The STM32L451VCT6 is an ultra-low-power Arm Cortex-M4 microcontroller rated up to 80 MHz, with a hardware FPU, 256 KB of Flash memory, DFSDM support, and a 100-lead 14 x 14 mm LQFP package. According to the STMicroelectronics STM32L451xx datasheet, the device family reaches up to 100 DMIPS. These characteristics make it suitable for low-power industrial control, analog data acquisition, audio sensing, and compact embedded systems requiring broad peripheral integration.
Where can I download the STM32L451VCT6 datasheet PDF?
The official STM32L451VCT6 datasheet PDF is available from STMicroelectronics at the manufacturer document URL listed on this page. The document is the STM32L451xx datasheet and contains the authoritative device description, electrical characteristics, pin definitions, memory organization, peripheral details, and package drawings. Use it to confirm pin multiplexing and timing before finalizing PCB connections or replacing the MCU in an existing assembly.
Where can I find the STM32L451VCT6 pinout?
The STM32L451VCT6 pinout is documented in the pin-definition section and package drawing of the STM32L451xx manufacturer datasheet. The exact MPN uses a 100-lead LQFP package measuring 14 x 14 mm, represented here by the LQFP-100 package diagram. Assign PCB nets from the datasheet pin table rather than relying only on package position, because many pins support multiple peripheral functions.
Is STM32L451VCT6 suitable for low-power sensor applications?
The STM32L451VCT6 is suitable for low-power sensor applications because it belongs to STMicroelectronics' ultra-low-power STM32L4 family and operates up to 80 MHz when processing performance is required. The manufacturer datasheet describes the device family as an ultra-low-power Arm Cortex-M4 MCU platform. Its DFSDM interface can also support digital acquisition paths from compatible sigma-delta modulators and digital microphones.
What does DFSDM provide in the STM32L451VCT6?
DFSDM provides a dedicated digital filter system for sampling compatible sigma-delta modulators and digital microphones. The STM32L451VCT6 listing specifically identifies DFSDM capability, while the STM32L451xx datasheet documents the interface and its operating characteristics. This allows selected sensor signals to be connected digitally without requiring a separate external DSP, although final channel count and timing must be confirmed from the device pin and peripheral tables.
Can STM32L452VCT6 replace STM32L451VCT6?
STM32L452VCT6 is a candidate for an STM32L451VCT6 redesign because both are 80 MHz STM32L4 devices in the 100-lead LQFP class, but it should not be treated as an unconditional firmware-compatible substitution. The STM32L452 adds features associated with the L452 family, including USB connectivity, and its peripheral mapping or boot behavior must be checked against the original design. Validate the pin table, clocks, firmware, and application interfaces before replacement.
What is the difference between STM32L451VCT6 and STM32L462VCT6?
STM32L462VCT6 offers a different feature balance within the STM32L4 family while retaining the 80 MHz Arm Cortex-M4 platform and 100-lead LQFP class associated with the target. The STM32L462 family includes higher-end connectivity and control features compared with the STM32L451, so it may be preferable for designs requiring USB or additional performance resources. Its peripheral assignments and firmware requirements must be compared with the STM32L451VCT6 before use as a drop-in replacement.
When should I choose STM32L451VCT6 instead of STM32L462VCT6?
Choose STM32L451VCT6 when the design needs an 80 MHz Cortex-M4 with FPU, 256 KB of Flash, DFSDM capability, and a compact 100-lead LQFP package without requiring the additional L462-family features. STM32L462VCT6 is more attractive when USB or other higher-end family resources justify the additional complexity. The decision should be based on required peripherals, firmware effort, and verified pin compatibility rather than processing frequency alone.
What is the best drop-in replacement for STM32L451VCT6?
STM32L452VCT6 is the closest listed same-footprint candidate because it retains the 80 MHz Cortex-M4 architecture and 100-lead LQFP format, but replacement approval depends on peripheral mapping and firmware compatibility. STM32L462VCT6, STM32L442VCT6, STM32L432VCT6, and STM32L451VET6 provide alternative feature or memory configurations. A true drop-in decision requires comparing the complete pin table, power behavior, clocks, and peripheral requirements.
Can STM32L432VCT6 replace STM32L451VCT6 in an existing design?
STM32L432VCT6 can be evaluated as a same-footprint STM32L4 alternative because it uses the 80 MHz Arm Cortex-M4 architecture and a 100-lead LQFP format, but existing firmware and peripheral assignments must be checked before it is approved. The STM32L432 family is positioned below the STM32L451 in functionality, so applications that depend on L451-specific DFSDM or other resources may require design changes. Verify every affected pin and software driver in the manufacturer documentation.
Is STM32L451VCT6 in stock?
Current stock and delivery status can change rapidly, so use the Request a Quote form on this page to ask for an exact STM32L451VCT6 availability check, including the required package, quantity, and ship-to region. The manufacturer and distributor listings associated with this part support quotation and fulfillment inquiries, but a listing alone should not be treated as a guaranteed stock commitment. Include your production schedule so the supplier can respond with an appropriate sourcing plan.
What is the price of STM32L451VCT6?
The current commercial terms for STM32L451VCT6 should be obtained through the Request a Quote form on this page. Submit the required quantity, target package suffix, delivery location, and production schedule for a current response. Because pricing and availability can vary with order volume, market conditions, and delivery requirements, a quote tied to those details is more useful than a static unit-price figure.
What is the lead time for STM32L451VCT6?
The current lead time for STM32L451VCT6 should be confirmed through the Request a Quote form on this page. Include the annual and per-order usage, requested delivery date, shipment destination, and whether unbroken production quantities are required. This allows the supplier to quote the exact 100-lead LQFP MPN and distinguish available inventory from material that requires manufacturer allocation or a scheduled production plan.
Where can I buy STM32L451VCT6 online?
Use the Request a Quote form on this page to request STM32L451VCT6 supply, current commercial terms, and delivery confirmation for your quantity. The exact ordering code shown is STM32L451VCT6, so include it in the request to avoid confusion with devices that use a different lead count, Flash-density code, temperature grade, or package form. Provide your ship-to country and target date for the most useful response.
What can replace STM32L451VCT6?
The closest listed replacements are STM32L452VCT6, STM32L462VCT6, STM32L442VCT6, STM32L432VCT6, and STM32L451VET6 because they retain the STM32L4 Cortex-M4 platform and 100-lead LQFP footprint class. None should be installed without checking the exact pin multiplexing, memory requirements, peripheral set, clock setup, and firmware. STM32L451VET6 provides more Flash, while the other candidates alter USB, DFSDM, or broader feature availability.
Is STM32L451VCT6 the same as STM32L452VCT6?
No. STM32L451VCT6 and STM32L452VCT6 share the STM32L4 family foundation, an 80 MHz Arm Cortex-M4 processor, and a 100-lead LQFP format, but they are not feature-identical devices. The STM32L452 family adds USB capability and can differ in peripheral availability and pin multiplexing. The STM32L451VCT6 specifically supports DFSDM, while engineers should verify every required interface and boot configuration before substitution.

Data referensi engineering untuk STM32L451VCT6 — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the STM32L451VCT6 when a design needs an 80 MHz Arm Cortex-M4 MCU with FPU, 256 KB of Flash, DFSDM, and a 100-lead 14 x 14 mm LQFP package in an ultra-low-power design. STM32L452VCT6 or STM32L442VCT6 are practical candidates when USB is needed, provided their USB pins and firmware requirements fit the board. Consider STM32L462VCT6 when broader connectivity and higher-end family features justify added complexity. STM32L432VCT6 may be suitable for a smaller feature set, but DFSDM-dependent designs require careful review. STM32L451VET6 is the same-footprint choice when 512 KB of Flash is preferred. In every case, treat package similarity as only the first gate: validate the complete pin table, memory map, peripheral mix, clocks, boot process, and firmware before approving a substitution.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini STM32L452VCT6 STM32L462VCT6 STM32L442VCT6 STM32L432VCT6 STM32L451VET6
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 100-lead LQFP, 14 x 14 mm 100-lead LQFP, 14 x 14 mm 100-lead LQFP, 14 x 14 mm 100-lead LQFP, 14 x 14 mm 100-lead LQFP, 14 x 14 mm 100-lead LQFP, 14 x 14 mm
Processor Core Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4
Maximum CPU Frequency 80 MHz 80 MHz 80 MHz 80 MHz 80 MHz 80 MHz
Flash Memory 256 KB 256 KB 256 KB 256 KB 256 KB 512 KB
USB Connectivity Not specified in the target listing Yes Yes Yes Not specified Not specified in the target listing
Floating-Point Unit Yes Yes Yes Yes Yes Yes

Diferensiator Kunci

  • DFSDM support enables direct digital acquisition from compatible sigma-delta devices (vsSTM32L432VCT6)
  • Uses 256 KB of Flash while retaining the same 100-lead LQFP footprint as the 512 KB variant (vsSTM32L451VET6)
  • 80 MHz Cortex-M4 processing with an FPU and up to 100 DMIPS (vsSTM32L452VCT6)
  • Ultra-low-power STM32L4 family positioning for duty-cycled embedded systems (vsSTM32L462VCT6)

Catatan Desain

Confirm every supply, analog-reference, and power-mode requirement against the STM32L451xx datasheet before laying out the board. Place the required decoupling capacitors directly beside their associated device pins, with the shortest possible ground-return paths. Low-power performance depends on avoiding unnecessary board-level leakage and on disabling unused peripherals in firmware; a low-power family designation does not remove the need for disciplined clock, GPIO, and analog configuration.

Use the 100-lead LQFP footprint and assign signals from the manufacturer pin table rather than from package position alone. Several pins can support alternate functions, and changing an MCU family member can alter peripheral multiplexing. Keep clock and high-speed serial routes away from sensitive analog inputs, provide a continuous ground reference under the device, and route test points to programming and debug signals so production validation does not require invasive board modifications.

Do not treat same-package STM32L4 devices as automatically interchangeable. Before substituting STM32L452VCT6, STM32L462VCT6, STM32L442VCT6, STM32L432VCT6, or STM32L451VET6, compare pin functions, DFSDM availability, USB support, Flash size, SRAM, clock configuration, peripheral instances, boot behavior, and software initialization. A successful PCB fit is only the first requirement; functional equivalence must be demonstrated on representative hardware.

Plan analog and digital signal paths according to the final peripheral assignments. DFSDM clock and data lines should be short, referenced to a continuous ground plane, and kept away from switching nodes and high-current return paths. If the MCU performs precision analog measurements, preserve clean grounding and use the manufacturer reference layout and component-selection guidance. Scope the analog input bandwidth and filter design rather than assuming the 80 MHz CPU clock determines useful signal accuracy.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was established for this exact MPN from the manufacturer and distributor results reviewed.

Data disahkan pada: 2026-11-14 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

STM32L451VCT6 datasheet STM32L451VCT6 pinout STM32L451VCT6 datasheet pdf STM32L451VCT6 specifications STM32L451VCT6 equivalent STM32L451VCT6 replacement STM32L451VCT6 cross reference STM32L451VCT6 vs STM32L452VCT6 STM32L451VCT6 footprint STMicroelectronics STM32L451VCT6 STM32L451VCT6 price STM32L451VCT6 stock STM32L451VCT6 application circuit STM32L451VCT6 LQFP-100 pinout

Komponen dan Istilah Terkait

STMicroelectronics STM32L451VCT6 STM32L451xx STM32L452VCT6 STM32L462VCT6 STM32L442VCT6 STM32L432VCT6 STM32L451VET6 Arm Cortex-M4 Arm Cortex-M4 processor core 32-bit microcontroller MCU embedded microcontroller semiconductor ultra-low-power microcontroller DFSDM digital filter system sigma-delta modulator digital microphone floating-point unit FPU 100 DMIPS Flash memory 256 KB Flash LQFP-100 100-lead LQFP 14 x 14 mm package surface mount industrial sensor node digital audio acquisition battery-powered data logger building automation connected industrial gateway low-power embedded system DMIPS pin multiplexing
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ