STM32L451VCT6 - 80MHz Cortex-M4 MCU, 256KB Flash | STMicroelectronics
MPN: STM32L451VCT6 ✓ NakahandaSTM32L451VCT6 Ulas
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one package. The STM32L451 belongs to the STM32L4 ultra-low-power family, where the product hierarchy is STM32L451 MCU, Arm Cortex-M4 microcontroller, 32-bit microcontroller, and embedded semiconductor. Within a system, it connects sensors, communications interfaces, analog converters, timers, and actuators while executing application firmware from its internal Flash memory.
The STM32L451VCT6 combines an 80 MHz Arm Cortex-M4 processor core with 256 KB of Flash, a hardware floating-point unit, and extensive peripheral integration. DFSDM support is particularly useful for direct sampling of sigma-delta modulators and digital microphones. The DFSDM interface, conventional timers, serial interfaces, and low-power modes allow one microcontroller to control mixed analog and digital subsystems while limiting overall board area and external component count.
Its ultra-low-power architecture is intended for systems where average energy use matters as much as peak processing performance. Low-power operating modes support battery-powered and intermittently energized equipment, while the 80 MHz operating point provides additional performance margin for control loops, communications buffering, and protocol handling. The integrated FPU accelerates floating-point calculations without requiring software emulation, helping reduce execution time in signal-processing and control applications.
Typical applications include industrial sensor nodes, low-power data loggers, building automation controllers, compact audio acquisition systems, digital microphone equipment, portable measurement instruments, and connected industrial products. A board can place the MCU between an analog front end and communications subsystem, using DFSDM for selected data paths and serial peripherals for host or network communication. Firmware can then schedule acquisition and processing tasks according to the application's duty cycle.
PCB design should preserve clean separation between sensitive analog inputs, digital interfaces, clock circuitry, and supply rails. Place decoupling capacitors close to the appropriate supply pins, route high-current and clock signals away from analog inputs, and provide continuous ground-plane paths beneath the device. Confirm pin availability, peripheral multiplexing, and boot configuration directly from the STM32L451xx datasheet before finalizing a new board or replacing an existing design.
This product page combines the manufacturer's core device characteristics, procurement-oriented component data, and practical guidance for evaluating the STM32L451VCT6 in low-power embedded systems. It also highlights same-footprint alternatives so engineers can assess feature changes, memory differences, and peripheral trade-offs before committing a design to a specific MCU variant.
Mga alternatibo na pwedeng ilagay na STM32L451VCT6 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok STM32L451VCT6 (parehas na form factor at footprint) — pagkakaiba sa Package, Flash Memory, ADC, DAC, Operating Temperature.
STM32L452VCT6
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →STM32L462VCT6
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
STM32L442VCT6
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
STM32L432VCT6
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
STM32L451VET6
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
STM32L451VCT6 Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 32-bit microcontroller |
| Processor Core | Arm Cortex-M4 |
| Maximum CPU Frequency | 80 MHz |
| Flash Memory | 256 KB |
| Flash Organization | 256K x 8 bits |
| Maximum Performance | 100 DMIPS |
| Floating-Point Unit | Yes |
| Digital Filter | DFSDM |
| Packhaging | 100-lead LQFP, 14 x 14 mm |
| Uri ng Pagpapasok | Surface mount |
Gabay sa Pin Configuration ng STM32L451VCT6 100-lead lqfp, 14 x 14 mm
Pin configuration para sa STM32L451VCT6 (100-lead lqfp, 14 x 14 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa STM32L451VCT6.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
STM32L451VCT6 ay nararapat para sa 6 aplikasyons: Industrial Sensor Nodes, Digital Audio Acquisition, Portable Measurement Instruments, Building Automation Controllers, Battery-Powered Data Loggers, Connected Industrial Gateways.
Industrial Sensor Nodes
The STM32L451VCT6 fits compact industrial sensor nodes that periodically acquire measurements, evaluate local logic, and communicate results. Its Arm Cortex-M4 core operates up to 80 MHz, providing enough throughput for filtering and control tasks, while the ultra-low-power STM32L4 platform supports duty-cycled operation in battery- or energy-harvested installations. The 256 KB of Flash stores firmware, calibration tables, and configuration data. A typical design connects sensors through available serial or analog peripherals, uses DFSDM where the selected sensor supports it, and wakes the MCU for acquisition cycles. The principal engineering benefit is consolidating sensing, processing, and communications in one 100-lead LQFP device while reducing inactive-system energy use.
Inirekomenda
Digital Audio Acquisition
The STM32L451VCT6 is suitable for digital audio acquisition systems using DFSDM-compatible sensors. DFSDM allows a digital microphone or compatible sigma-delta modulator to provide sampled data directly to the MCU, avoiding a separate audio converter in suitable designs. The 80 MHz Cortex-M4 core can manage buffering and basic processing, while its floating-point unit accelerates arithmetic operations that would otherwise require software routines. The 256 KB of Flash is sufficient for control firmware and constrained audio-processing code. System partitioning remains important: confirm the required DFSDM channel count, data rate, clock source, and pin assignments from the manufacturer datasheet before committing the sensor and PCB layout.
Inirekomenda
Portable Measurement Instruments
The STM32L451VCT6 supports portable measurement instruments that combine sensor conditioning, digital acquisition, local display control, and data logging. Its 80 MHz processing capability provides responsiveness for filtering, calibration, and control algorithms, while the hardware FPU supports efficient floating-point calculations. The ultra-low-power architecture is valuable in handheld or field instruments where dwell time between charges is limited. Designers can retain measurement data in the 256 KB of internal Flash or transfer it through an available serial interface. Supply-voltage accuracy, analog reference design, ADC performance, and low-power peripheral behavior should be reviewed against the STM32L451xx datasheet because the exact electrical limits are not summarized by the product listing.
Inirekomenda
Building Automation Controllers
The STM32L451VCT6 can serve as the central controller in a building automation node managing environmental sensors, actuator commands, and communication links. Its Cortex-M4 core runs at up to 80 MHz, allowing the firmware to handle protocol stacks, control logic, and diagnostics without a separate processor. The ultra-low-power family designation supports designs expected to spend substantial time in low-energy states. The MCU can coordinate temperature, occupancy, air-quality, and actuator interfaces while logging events locally. A practical implementation should allocate peripheral pins carefully because the 100-lead LQFP offers many I/O options but multiplexes several functions. Watchdog behavior, brownout handling, clock startup, and communication timing should be validated during fault-injection testing.
Inirekomenda
Battery-Powered Data Loggers
The STM32L451VCT6 is appropriate for battery-powered data loggers that periodically capture sensor readings and retain or transmit them. Its low-power operating architecture reduces the energy burden of long idle periods, while the 80 MHz Cortex-M4 core allows short processing bursts when data is acquired. The 256 KB of Flash can hold application firmware and a bounded local event buffer. DFSDM can reduce external conversion hardware for compatible digital sensors, while serial peripherals can provide links to storage or wireless modules. For maximum benefit, firmware should disable unused blocks, select the lowest acceptable clock rate during light work, and use peripheral event interrupts rather than continuous polling. Battery capacity, wake latency, and worst-case radio activity remain system-level constraints outside the MCU specification.
Inirekomenda
Connected Industrial Gateways
The STM32L451VCT6 can act as a local gateway processor for compact industrial equipment that aggregates sensor data, performs protocol conversion, and manages a host interface. The 80 MHz Arm Cortex-M4 core and hardware FPU provide useful throughput for packet handling and control tasks, while 256 KB of Flash accommodates a structured firmware image and protocol configuration. The 100-lead LQFP package provides a generous pin count for serial links, status indicators, and control signals in a 14 x 14 mm footprint. If the design later requires USB, STM32L452VCT6 or STM32L462VCT6 may be considered after peripheral and firmware review. For the STM32L451VCT6, Ethernet or external radios require their own circuitry and pins rather than being implied by the core specification.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for STM32L451VCT6 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | STM32L452VCT6 | STM32L462VCT6 | STM32L442VCT6 | STM32L432VCT6 | STM32L451VET6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 100-lead LQFP, 14 x 14 mm | 100-lead LQFP, 14 x 14 mm | 100-lead LQFP, 14 x 14 mm | 100-lead LQFP, 14 x 14 mm | 100-lead LQFP, 14 x 14 mm | 100-lead LQFP, 14 x 14 mm |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum CPU Frequency | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| Flash Memory | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB | 512 KB |
| USB Connectivity | Not specified in the target listing | Yes | Yes | Yes | Not specified | Not specified in the target listing |
| Floating-Point Unit | Yes | Yes | Yes | Yes | Yes | Yes |
Pangunahing mga Pagkakaiba
- DFSDM support enables direct digital acquisition from compatible sigma-delta devices (kumpara saSTM32L432VCT6)
- Uses 256 KB of Flash while retaining the same 100-lead LQFP footprint as the 512 KB variant (kumpara saSTM32L451VET6)
- 80 MHz Cortex-M4 processing with an FPU and up to 100 DMIPS (kumpara saSTM32L452VCT6)
- Ultra-low-power STM32L4 family positioning for duty-cycled embedded systems (kumpara saSTM32L462VCT6)
Talaan ng Disenyo
Confirm every supply, analog-reference, and power-mode requirement against the STM32L451xx datasheet before laying out the board. Place the required decoupling capacitors directly beside their associated device pins, with the shortest possible ground-return paths. Low-power performance depends on avoiding unnecessary board-level leakage and on disabling unused peripherals in firmware; a low-power family designation does not remove the need for disciplined clock, GPIO, and analog configuration.
Use the 100-lead LQFP footprint and assign signals from the manufacturer pin table rather than from package position alone. Several pins can support alternate functions, and changing an MCU family member can alter peripheral multiplexing. Keep clock and high-speed serial routes away from sensitive analog inputs, provide a continuous ground reference under the device, and route test points to programming and debug signals so production validation does not require invasive board modifications.
Do not treat same-package STM32L4 devices as automatically interchangeable. Before substituting STM32L452VCT6, STM32L462VCT6, STM32L442VCT6, STM32L432VCT6, or STM32L451VET6, compare pin functions, DFSDM availability, USB support, Flash size, SRAM, clock configuration, peripheral instances, boot behavior, and software initialization. A successful PCB fit is only the first requirement; functional equivalence must be demonstrated on representative hardware.
Plan analog and digital signal paths according to the final peripheral assignments. DFSDM clock and data lines should be short, referenced to a continuous ground plane, and kept away from switching nodes and high-current return paths. If the MCU performs precision analog measurements, preserve clean grounding and use the manufacturer reference layout and component-selection guidance. Scope the analog input bandwidth and filter design rather than assuming the 80 MHz CPU clock determines useful signal accuracy.
Impormasyon ng Pagsunod sa Kautusan
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was established for this exact MPN from the manufacturer and distributor results reviewed.