STM32L4S9ZIT6 - Ultra-Low-Power ARM Cortex-M4F MCU | STMicroelectronics
MPN: STM32L4S9ZIT6 ✓ AktifSTM32L4S9ZIT6 Ringkasan
A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (flash and SRAM), and programmable input/output peripherals on a single chip. The STM32L4 series is part of STMicroelectronics' ultra-low-power portfolio, targeting battery-powered and energy-harvesting applications. The Cortex-M4 core with FPU enables efficient digital signal processing (DSP) instructions and single-precision floating-point arithmetic, bridging the gap between general-purpose MCUs and higher-end application processors.
Key features include a rich set of analog peripherals: three 12-bit ADCs with up to 5 MSPS, two 12-bit DACs, two operational amplifiers, two comparators, and an internal voltage reference buffer. For connectivity, it offers multiple communication interfaces: 6x I2C, 6x USART/UART, 3x SPI, 2x SAI (serial audio interface), 1x SDMMC, 1x CAN, 1x USB OTG FS, and 1x camera interface (DCMI). The device also includes a Chrom-ART Accelerator (DMA2D) for 2D graphics, a true random number generator (TRNG), and a hardware cryptographic accelerator (AES, DES, 3DES, and SHA-1/SHA-256).
The STM32L4S9ZIT6 is built on a 40 nm process technology, achieving ultra-low power consumption: 100 nA in shutdown mode, 3.6 uA in standby mode with RTC, and 28 uA/MHz in run mode. It supports a wide supply voltage range of 1.71V to 3.6V, with an internal voltage regulator and power management unit. The device includes a flexible power controller with multiple low-power modes (Sleep, Low-power run, Low-power sleep, Stop 0/1/2, Standby, Shutdown) to optimize energy efficiency.
Typical applications include industrial sensors, smart meters, medical devices, wearable devices, IoT nodes, and audio processing. The large memory and rich peripherals make it ideal for applications requiring local data logging, advanced user interfaces, or real-time signal processing. The Chrom-ART accelerator and TFT-LCD controller (LTDC) support graphical displays without burdening the CPU.
When designing with this device, pay attention to power supply decoupling: place a 100 nF capacitor close to each VDD pin and a 4.7 uF capacitor on the main supply. For low-power modes, configure the RTC and wakeup sources carefully to minimize current consumption. The device supports in-circuit programming and debugging via SWD and JTAG interfaces, facilitating development.
Alternatif penggantian untuk STM32L4S9ZIT6 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian STM32L4S9ZIT6 (sama faktor bentuk dan footprint) — berbeda di dalam Core, Flash Memory, Package.
STM32L4S7ZIT6
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
STM32L4S5ZIT6
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
STM32L4R9ZIT6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →R7FS7G27H2A01CLK
⚡ Pakai Pakai Sama ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
STM32L4S9ZIT6 Rating Maksimal & Karakteristik Listrik
| Core | ARM Cortex-M4 with FPU |
| Frekuensi Bawah Maximum | 120 MHz |
| Flash Memory | 2 MB |
| SRAM | 640 KB |
| Supply Voltage Range | 1.71 V to 3.6 V |
| Rentang Suhu Kerja | -40C to +85C |
| Paket | LQFP144 (20x20 mm) |
| Number of I/Os | 114 |
| ADC Resolution | 12-bit (3x ADC, up to 5 MSPS) |
| DAC Resolution | 12-bit (2x DAC) |
| Communication Interfaces | 6x I2C, 6x USART/UART, 3x SPI, 2x SAI, 1x SDMMC, 1x CAN, 1x USB OTG FS, 1x DCMI |
| Timers | 2x 32-bit, 6x 16-bit, 2x low-power, 1x SysTick |
| DMA Channels | 2x DMA with 16 channels each |
| Cryptographic Acceleration | AES, DES, 3DES, SHA-1, SHA-256 |
| Random Number Generator | TRNG |
| Low-Power Modes | Sleep, Low-power run, Low-power sleep, Stop 0/1/2, Standby, Shutdown |
| Standby Current | 3.6 uA (with RTC) |
| Arus Menutup | 100 nA |
| Run Current | 28 uA/MHz |
| Status RoHS | Compliant |
Konfigurasi Pin STM32L4S9ZIT6
| Pin produk 1 | PE2 — GPIO / TRACECLK |
| Pin produk 2 | PE3 — GPIO / TRACED0 |
| Pin produk 3 | PE4 — GPIO / TRACED1 |
| Pin produk 4 | PE5 — GPIO / TRACED2 |
| Pin produk 5 | PE6 — GPIO / TRACED3 |
| Pin produk 6 | VBAT — Battery backup supply |
| Pin produk 7 | PC13 — GPIO / RTC_TAMP1 / RTC_TS |
| Pin produk 8 | PC14 — GPIO / OSC32_IN |
| Pin produk 9 | PC15 — GPIO / OSC32_OUT |
| Pin produk 10 | PF0 — GPIO / OSC_IN |
| Pin produk 11 | PF1 — GPIO / OSC_OUT |
| Pin produk 12 | PF2 — GPIO |
| Pin produk 13 | VSSA — Analog ground |
| Pin produk 14 | VDDA — Analog power supply |
| Pin produk 15 | PA0 — GPIO / ADC_IN0 / DAC_OUT1 |
| Pin produk 16 | PA1 — GPIO / ADC_IN1 / DAC_OUT2 |
| Pin produk 17 | PA2 — GPIO / USART2_TX / ADC_IN2 |
| Pin produk 18 | PA3 — GPIO / USART2_RX / ADC_IN3 |
| Pin produk 19 | VSS — Ground |
| Pin produk 20 | VDD — Power supply |
| Pin produk 21 | PA4 — GPIO / SPI1_NSS / DAC_OUT1 |
| Pin produk 22 | PA5 — GPIO / SPI1_SCK / DAC_OUT2 |
| Pin produk 23 | PA6 — GPIO / SPI1_MISO / ADC_IN6 |
| Pin produk 24 | PA7 — GPIO / SPI1_MOSI / ADC_IN7 |
| Pin produk 25 | PE7 — GPIO / TIM1_ETR |
| Pin produk 26 | PE8 — GPIO / TIM1_CH1N |
| Pin produk 27 | PE9 — GPIO / TIM1_CH1 |
| Pin produk 28 | PE10 — GPIO / TIM1_CH2N |
| Pin produk 29 | PE11 — GPIO / TIM1_CH2 |
| Pin produk 30 | PE12 — GPIO / TIM1_CH3N |
| Pin produk 31 | PE13 — GPIO / TIM1_CH3 |
| Pin produk 32 | PE14 — GPIO / TIM1_CH4 |
| Pin produk 33 | PE15 — GPIO / TIM1_CH4N |
| Pin produk 34 | PB0 — GPIO / ADC_IN8 |
| Pin produk 35 | PB1 — GPIO / ADC_IN9 |
| Pin produk 36 | PB2 — GPIO |
| Pin produk 37 | PB3 — GPIO / SPI1_SCK / TRACED0 |
| Pin produk 38 | PB4 — GPIO / SPI1_MISO |
| Pin produk 39 | PB5 — GPIO / SPI1_MOSI |
| Pin produk 40 | PB6 — GPIO / I2C1_SCL |
| Pin produk 41 | PB7 — GPIO / I2C1_SDA |
| Pin produk 42 | BOOT0 — Boot mode selection |
| Pin produk 43 | PB8 — GPIO / I2C1_SCL / CAN1_RX |
| Pin produk 44 | PB9 — GPIO / I2C1_SDA / CAN1_TX |
| Pin produk 45 | VSS — Ground |
| Pin produk 46 | VDD — Power supply |
| Pin produk 47 | PE0 — GPIO / TIM4_ETR |
| Pin produk 48 | PE1 — GPIO / TIM4_CH1 |
| Pin produk 49 | PB10 — GPIO / I2C2_SCL / USART3_TX |
| Pin produk 50 | PB11 — GPIO / I2C2_SDA / USART3_RX |
| Pin produk 51 | PB12 — GPIO / SPI2_NSS / I2C2_SCL |
| Pin produk 52 | PB13 — GPIO / SPI2_SCK / I2C2_SDA |
| Pin produk 53 | PB14 — GPIO / SPI2_MISO / USART1_TX |
| Pin produk 54 | PB15 — GPIO / SPI2_MOSI / USART1_RX |
| Pin produk 55 | PD8 — GPIO / USART3_TX |
| Pin produk 56 | PD9 — GPIO / USART3_RX |
| Pin produk 57 | PD10 — GPIO / USART3_CK |
| Pin produk 58 | PD11 — GPIO / USART3_CTS |
| Pin produk 59 | PD12 — GPIO / USART3_RTS |
| Pin produk 60 | PD13 — GPIO |
| Pin produk 61 | PD14 — GPIO |
| Pin produk 62 | PD15 — GPIO |
| Pin produk 63 | PC6 — GPIO / I2S2_MCK |
| Pin produk 64 | PC7 — GPIO / I2S2_SCK |
| Pin produk 65 | PC8 — GPIO / I2S2_SD |
| Pin produk 66 | PC9 — GPIO / I2S2_WS |
| Pin produk 67 | PA8 — GPIO / I2C3_SCL / USB_OTG_FS_SOF |
| Pin produk 68 | PA9 — GPIO / I2C3_SDA / USB_OTG_FS_VBUS |
| Pin produk 69 | PA10 — GPIO / I2C3_SCL / USB_OTG_FS_ID |
| Pin produk 70 | PA11 — GPIO / I2C3_SDA / USB_OTG_FS_DM |
| Pin produk 71 | PA12 — GPIO / USB_OTG_FS_DP |
| Pin produk 72 | PA13 — GPIO / SWDIO |
| Pin produk 73 | VSS — Ground |
| Pin produk 74 | VDD — Power supply |
| Pin produk 75 | PA14 — GPIO / SWCLK |
| Pin produk 76 | PA15 — GPIO / JTDI |
| Pin produk 77 | PC10 — GPIO / I2S3_SCK |
| Pin produk 78 | PC11 — GPIO / I2S3_SD |
| Pin produk 79 | PC12 — GPIO / I2S3_WS |
| Pin produk 80 | PD0 — GPIO / CAN1_RX |
| Pin produk 81 | PD1 — GPIO / CAN1_TX |
| Pin produk 82 | PD2 — GPIO / SDMMC1_CMD |
| Pin produk 83 | PD3 — GPIO / SDMMC1_CK |
| Pin produk 84 | PD4 — GPIO / SDMMC1_D0 |
| Pin produk 85 | PD5 — GPIO / SDMMC1_D1 |
| Pin produk 86 | PD6 — GPIO / SDMMC1_D2 |
| Pin produk 87 | PD7 — GPIO / SDMMC1_D3 |
| Pin produk 88 | PH0 — GPIO / OSC_IN |
| Pin produk 89 | PH1 — GPIO / OSC_OUT |
| Pin produk 90 | PH2 — GPIO |
| Pin produk 91 | PH3 — GPIO |
| Pin produk 92 | PH4 — GPIO |
| Pin produk 93 | PH5 — GPIO |
| Pin produk 94 | PH6 — GPIO |
| Pin produk 95 | PH7 — GPIO |
| Pin produk 96 | PH8 — GPIO |
| Pin produk 97 | PH9 — GPIO |
| Pin produk 98 | PH10 — GPIO |
| Pin produk 99 | PH11 — GPIO |
| Pin produk 100 | PH12 — GPIO |
| Pin produk 101 | PH13 — GPIO |
| Pin produk 102 | PH14 — GPIO |
| Pin produk 103 | PH15 — GPIO |
| Pin produk 104 | VSS — Ground |
| Pin produk 105 | VDD — Power supply |
| Pin produk 106 | PI0 — GPIO |
| Pin produk 107 | PI1 — GPIO |
| Pin produk 108 | PI2 — GPIO |
| Pin produk 109 | PI3 — GPIO |
| Pin produk 110 | PI4 — GPIO |
| Pin produk 111 | PI5 — GPIO |
| Pin produk 112 | PI6 — GPIO |
| Pin produk 113 | PI7 — GPIO |
| Pin produk 114 | PI8 — GPIO |
| Pin produk 115 | PI9 — GPIO |
| Pin produk 116 | PI10 — GPIO |
| Pin produk 117 | PI11 — GPIO |
| Pin produk 118 | PI12 — GPIO |
| Pin produk 119 | PI13 — GPIO |
| Pin produk 120 | PI14 — GPIO |
| Pin produk 121 | PI15 — GPIO |
| Pin produk 122 | VSS — Ground |
| Pin produk 123 | VDD — Power supply |
| Pin produk 124 | PC0 — GPIO / ADC_IN10 |
| Pin produk 125 | PC1 — GPIO / ADC_IN11 |
| Pin produk 126 | PC2 — GPIO / ADC_IN12 |
| Pin produk 127 | PC3 — GPIO / ADC_IN13 |
| Pin produk 128 | PC4 — GPIO / ADC_IN14 |
| Pin produk 129 | PC5 — GPIO / ADC_IN15 |
| Pin produk 130 | PB16 — GPIO |
| Pin produk 131 | PB17 — GPIO |
| Pin produk 132 | PB18 — GPIO |
| Pin produk 133 | PB19 — GPIO |
| Pin produk 134 | PB20 — GPIO |
| Pin produk 135 | PB21 — GPIO |
| Pin produk 136 | PB22 — GPIO |
| Pin produk 137 | PB23 — GPIO |
| Pin produk 138 | VSS — Ground |
| Pin produk 139 | VDD — Power supply |
| Pin produk 140 | PA0 — GPIO / ADC_IN0 / DAC_OUT1 |
| Pin produk 141 | PA1 — GPIO / ADC_IN1 / DAC_OUT2 |
| Pin produk 142 | PA2 — GPIO / USART2_TX / ADC_IN2 |
| Pin produk 143 | PA3 — GPIO / USART2_RX / ADC_IN3 |
| Pin produk 144 | VSS — Ground |
Aplikasi Umum
STM32L4S9ZIT6 cocok untuk 6 aplikasis: Industrial Sensors, Smart Meters, Medical Devices, Wearable Devices, IoT Nodes, Audio Processing.
Industrial Sensors
The STM32L4S9ZIT6 is ideal for industrial sensors requiring high-precision analog measurement and low power consumption. Its three 12-bit ADCs with up to 5 MSPS sampling rate enable accurate data acquisition from multiple sensor channels. The device's ultra-low-power modes (100 nA shutdown) extend battery life in wireless sensor nodes. The 2 MB flash allows storing calibration data and firmware updates. The multiple communication interfaces (I2C, SPI, UART) connect to various sensor modules. The Cortex-M4 FPU accelerates signal processing algorithms for sensor fusion. The wide supply voltage range (1.71V to 3.6V) accommodates battery-powered designs. The device's robust operating temperature range (-40C to +85C) suits industrial environments. The hardware cryptographic accelerator secures data transmission in IoT applications. The large SRAM (640 KB) supports real-time data buffering. The device's rich timer resources enable precise timing for sensor sampling. The Chrom-ART accelerator can drive graphical displays for local data visualization. The device's low-power run mode (28 uA/MHz) optimizes energy efficiency during active processing. The device's multiple low-power modes allow dynamic power management based on sensor activity. The device's DMA controllers offload data transfer, reducing CPU load. The device's true random number generator (TRNG) supports secure key generation for encrypted sensor data.
Direkomendasikan
Smart Meters
The STM32L4S9ZIT6 is well-suited for smart metering applications, including electricity, water, and gas meters. Its ultra-low-power consumption (100 nA shutdown) ensures long battery life, critical for meters that operate for years without maintenance. The device's multiple communication interfaces (UART, SPI, I2C, CAN) support various metering protocols and connectivity options, including wireless modules. The 2 MB flash memory provides ample space for metering firmware, tariff tables, and data logging. The 640 KB SRAM enables real-time data processing and buffering. The device's cryptographic accelerator secures communication with the utility network, protecting against tampering. The 12-bit ADCs with high sampling rate accurately measure voltage and current for energy calculation. The device's low-power modes allow the meter to sleep between measurements, conserving energy. The wide supply voltage range accommodates battery and line-powered designs. The device's robust operating temperature range (-40C to +85C) suits outdoor installations. The multiple timers support precise timekeeping for billing. The device's DMA controllers efficiently handle data transfer from metering ICs. The device's true random number generator (TRNG) supports secure key management. The device's rich peripheral set reduces external component count, lowering BOM cost. The device's long-term availability and ST's 10-year longevity program ensure supply continuity for utility deployments.
Direkomendasikan
Medical Devices
The STM32L4S9ZIT6 is suitable for medical devices such as patient monitors, glucose meters, and portable diagnostic equipment. Its high-performance Cortex-M4 core with FPU enables real-time signal processing for ECG, EEG, and other biosignals. The device's low power consumption extends battery life in portable devices. The 2 MB flash memory stores complex algorithms and patient data. The 640 KB SRAM supports large data buffers for continuous monitoring. The device's multiple ADCs and DACs interface with analog front-ends for sensor conditioning. The communication interfaces (USB, UART, SPI) connect to external displays, wireless modules, and host systems. The device's cryptographic accelerator secures patient data transmission, complying with healthcare regulations. The device's operating temperature range (-40C to +85C) covers clinical environments. The device's rich timer resources enable precise sampling and waveform generation. The device's DMA controllers offload data transfer, ensuring real-time performance. The device's low-power modes allow the device to sleep between measurements, conserving battery. The device's wide supply voltage range supports various battery chemistries. The device's long-term availability and ST's medical-grade quality ensure reliability. The device's Chrom-ART accelerator can drive graphical user interfaces for patient data visualization. The device's true random number generator (TRNG) supports secure authentication.
Direkomendasikan
Wearable Devices
The STM32L4S9ZIT6 is ideal for wearable devices like smartwatches, fitness trackers, and health monitors. Its ultra-low-power consumption (100 nA shutdown, 28 uA/MHz run) is critical for battery-powered wearables that need to last days or weeks on a single charge. The device's small form factor (LQFP144) and rich peripheral set enable compact designs. The 2 MB flash memory stores firmware, user data, and sensor calibration. The 640 KB SRAM supports real-time data processing and buffering. The device's multiple communication interfaces (I2C, SPI, UART, USB) connect to sensors, displays, and wireless modules. The Cortex-M4 FPU accelerates sensor fusion algorithms for activity tracking. The device's low-power modes allow the wearable to sleep between sensor readings, conserving energy. The device's wide supply voltage range (1.71V to 3.6V) supports Li-ion batteries. The device's operating temperature range (-40C to +85C) covers body-worn conditions. The device's cryptographic accelerator secures data transmission to smartphones. The device's Chrom-ART accelerator drives graphical displays for user interfaces. The device's multiple timers support precise timekeeping and event scheduling. The device's DMA controllers offload data transfer, reducing CPU load. The device's true random number generator (TRNG) supports secure pairing. The device's long-term availability ensures product longevity.
Direkomendasikan
IoT Nodes
The STM32L4S9ZIT6 is a powerful choice for IoT edge nodes that require local processing, connectivity, and low power. Its Cortex-M4 core with FPU enables edge AI and signal processing, reducing the need to send raw data to the cloud. The device's ultra-low-power modes (100 nA shutdown) extend battery life in remote sensors. The 2 MB flash memory stores firmware, ML models, and data logs. The 640 KB SRAM supports real-time data buffering and inference. The device's multiple communication interfaces (UART, SPI, I2C, USB, CAN) connect to various wireless modules (LoRa, NB-IoT, Wi-Fi, BLE). The device's cryptographic accelerator secures MQTT and TLS connections. The device's wide supply voltage range (1.71V to 3.6V) supports battery and energy-harvesting designs. The device's operating temperature range (-40C to +85C) suits outdoor deployments. The device's multiple timers support scheduled wake-ups and sleep cycles. The device's DMA controllers offload data transfer, reducing CPU load. The device's true random number generator (TRNG) supports secure key generation. The device's low-power run mode (28 uA/MHz) optimizes energy efficiency during active processing. The device's rich peripheral set reduces external component count, lowering BOM cost. The device's long-term availability and ST's 10-year longevity program ensure supply continuity.
Direkomendasikan
Audio Processing
The STM32L4S9ZIT6 is well-suited for audio processing applications such as voice-controlled devices, audio effects processors, and smart speakers. Its Cortex-M4 core with FPU and DSP instructions enables real-time audio filtering, equalization, and noise reduction. The device's two SAI interfaces support I2S audio input and output, connecting to codecs and digital microphones. The 2 MB flash memory stores audio samples and processing algorithms. The 640 KB SRAM supports large audio buffers for low-latency processing. The device's multiple ADCs and DACs can interface with analog audio circuits. The device's Chrom-ART accelerator can drive graphical user interfaces for audio equipment. The device's low-power modes allow the device to sleep when not processing audio, conserving energy. The device's wide supply voltage range (1.71V to 3.6V) supports battery-powered audio devices. The device's operating temperature range (-40C to +85C) covers consumer and industrial environments. The device's cryptographic accelerator secures audio streaming protocols. The device's multiple timers support precise sample rate generation. The device's DMA controllers offload audio data transfer, reducing CPU load. The device's true random number generator (TRNG) supports secure pairing. The device's rich peripheral set reduces external component count, lowering BOM cost. The device's long-term availability ensures product longevity.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk STM32L4S9ZIT6 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | STM32L4S7ZIT6 | STM32L4S5ZIT6 | STM32L4R9ZIT6 | STM32L4S9ZIJ6 | LPC54608J512BD208 | R7FS7G27H2A01CLK |
|---|---|---|---|---|---|---|---|
| Package | LQFP144 | LQFP144 | LQFP144 | LQFP144 | UFBGA176 | LQFP208 | LQFP144 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | NXP Semiconductors | Renesas Electronics |
| Core | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU |
| Max Clock Frequency | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 180 MHz | 120 MHz |
| Flash Memory | 2 MB | 2 MB | 512 KB | 2 MB | 2 MB | 512 KB | 2 MB |
| SRAM | 640 KB | 640 KB | 320 KB | 640 KB | 640 KB | 200 KB | 640 KB |
| Supply Voltage Range | 1.71V to 3.6V | 1.71V to 3.6V | 1.71V to 3.6V | 1.71V to 3.6V | 1.71V to 3.6V | 1.71V to 3.6V | 1.6V to 3.6V |
| Number of I/Os | 114 | 114 | 114 | 114 | 136 | 165 | 114 |
| Camera Interface (DCMI) | Yes | No | No | No | Yes | No | No |
| Chrom-ART Accelerator | Yes | No | No | Yes | Yes | No | No |
Diferensiator Kunci
- Largest memory in STM32L4 series (vsSTM32L4S5ZIT6)
- Integrated camera interface and Chrom-ART accelerator (vsSTM32L4S7ZIT6)
- Ultra-low power consumption (vsLPC54608J512BD208)
Catatan Desain
Decouple each VDD pin with a 100 nF ceramic capacitor placed as close as possible to the pin. Additionally, place a 4.7 uF capacitor on the main VDD supply. For VDDA, use a 1 uF capacitor and a ferrite bead to isolate analog noise. Ensure the VBAT pin is connected to a backup battery or tied to VDD through a diode for RTC operation.
For the LQFP144 package, use a 4-layer PCB with a solid ground plane. Route high-speed signals (SDMMC, USB, camera) with controlled impedance. Keep crystal oscillator traces short and away from high-current traces. Use the exposed pad (EP) for thermal dissipation by connecting it to the ground plane with multiple vias.
Ensure the BOOT0 pin is properly configured to select the correct boot mode. For low-power applications, configure all unused GPIOs as analog inputs to minimize leakage current. When using the RTC, ensure the LSE crystal is properly loaded with the specified load capacitance. Avoid exceeding the absolute maximum ratings on any pin.
Informasi Konformitas
RoHS and REACH compliant per STMicroelectronics product page. Not AEC-Q100 qualified for standard version; automotive grade variant STM32L4S9ZIT6Q is available.
