STMicroelectronics

STM8L101F3U6TR - 8-Bit 16MHz Low-Power MCU | STMicroelectronics

MPN: STM8L101F3U6TR ✓ Aktif
1.65 V to 3.6 V Vdss 20-pin UFQFPN, 3 mm x 3 mm Package 16 MHz Speed 8 KB Flash Memory
MOQ: 1 |

STM8L101F3U6TR Ringkasan

STMicroelectronics STM8L101F3U6TR is an 8-bit ultra-low-power microcontroller operating at up to 16 MHz, with 8 KB of Flash memory, 1.5 KB of RAM and a 20-pin UFQFPN 3x3 mm package. It combines the STM8 CPU core with low-power operation, multifunction timers, comparators, USART, SPI and I2C connectivity.

An ultra-low-power microcontroller is a semiconductor designed to maintain useful processing and peripheral performance while minimizing energy consumption in battery-powered or intermittently powered equipment. The STM8L101 belongs to the STM8L EnergyLite family, a low-power branch of the STM8 8-bit microcontroller portfolio. Its small package, embedded Flash and broad serial-interface support make it suitable for compact control and sensing products.

Key characteristics include up to 16 MIPS processing performance at 16 MHz, 8 KB of program Flash, 1.5 KB of RAM and an operating supply range of 1.65 V to 3.6 V. Integrated communication blocks include USART, SPI and I2C, while timers and comparators support local control, timing and threshold decisions without requiring separate peripheral devices.

The STM8L101F3 architecture is designed for energy-sensitive embedded systems where a low-power operating mode and a small package are more important than high pin count or large memory capacity. Its 20-pin UFQFPN package includes 3 mm by 3 mm footprint options, allowing the controller to be used in compact products while retaining exposed-pad thermal-management and high-density PCB-layout flexibility.

Typical uses include battery-powered sensors, compact industrial controllers, low-power serial gateways, wearable accessories and smart-home endpoints. USART and I2C can connect local sensors or an application processor, SPI supports higher-speed peripherals, and the timers can handle periodic sampling or actuator timing. Firmware selection must account for the 8 KB Flash and 1.5 KB RAM limits.

When designing the PCB, use a thermal-aware exposed-pad layout, place decoupling capacitors close to the supply pins and route the serial interfaces away from switching nodes. Confirm the complete pin assignment and exposed-pad connection against the STMicroelectronics pinout documentation before fabrication. Deep-sleep or stop-mode behavior should be validated against the system wake-up timing and measurement budget.

This product page consolidates the verified core specifications, a focused drop-in comparison, interface-oriented design guidance and practical application guidance. It helps engineers assess the STM8L101F3U6TR for compact, low-power embedded designs while highlighting memory constraints, package considerations and the need to verify pin-level implementation details.

Alternatif penggantian untuk STM8L101F3U6TR — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

STM8L101F3U6ATR

✅ Drop-In
📦 20-pin UFQFPN, 3 mm x 3 mm
Same STM8L101F3 family and 20-pin UFQFPN package; ordering-code temperature or handling qualification requires final datasheet verification.

📋 Alternatif referensi (tidak dalam katalog)

STM8L101F3U6TR Rating Maksimal & Karakteristik Listrik

Product Type 8-bit ultra-low-power microcontroller
CPU Architecture Enhanced STM8 8-bit core
Maximum CPU Frequency 16 MHz
Maximum Processing Performance 16 MIPS at 16 MHz
Program Memory Size 8 KB Flash
Flash Organization 8K x 8 bits
RAM Size 1.5 KB
EEPROM 2K x 8 bits
Supply Voltage Range 1.65 V to 3.6 V
Serial Interfaces USART, SPI and I2C
Analog and Timing Resources Comparators and multifunction timers
Oscillator Internal oscillator
Rentang Suhu Kerja -40 °C to +85 °C
Paket 20-pin UFQFPN, 3 mm x 3 mm
Tipe Mounting Surface mount
Shipping Package Tape and reel
Status RoHS Compliant

STM8L101F3U6TR tape and reel Diamant Konfigurasi Panduan

Konfigurasi pin untuk STM8L101F3U6TR (tape and reel pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai tape and reel untuk STM8L101F3U6TR

Tidak ada data diatribut pin yang tersedia untuk STM8L101F3U6TR.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

STM8L101F3U6TR cocok untuk 3 aplikasis: Sistem Embedded, Perangkat IoT, Kontrol Industri.

🧩

Sistem Embedded

Proses pusat dalam aplikasi embedded menggunakan STM8L101F3U6TR.

🌐

Perangkat IoT

Perangkat koneksi cerdas diperkuat oleh STM8L101F3U6TR.

🏭

Kontrol Industri

Sistem otomatisasi dan kontrol menggunakan STM8L101F3U6TR.

What is the operating voltage of STM8L101F3U6TR?
The STM8L101F3U6TR operates from 1.65 V to 3.6 V. According to the STMicroelectronics STM8L101F3 product documentation, the device is an 8-bit ultra-low-power microcontroller with an enhanced STM8 CPU core and up to 16 MIPS performance at 16 MHz. Designers should maintain the supply within this range under startup, active, standby and low-power operating conditions.
How much Flash and RAM does the STM8L101F3U6TR have?
The STM8L101F3U6TR provides 8 KB of Flash program memory and 1.5 KB of RAM. The Flash is organized as 8K x 8 bits, and the device also includes 2K x 8 bits of EEPROM. According to the STMicroelectronics product family documentation, these resources suit compact control tasks where the application must be sized around limited code and working-memory capacity.
What interfaces are available on the STM8L101F3U6TR?
The STM8L101F3U6TR includes USART, SPI and I2C serial interfaces, along with multifunction timers and comparators. The STMicroelectronics family description identifies these peripherals for communications, timing and local threshold-control applications. Use I2C for low-rate sensors, SPI for faster peripheral transfers and USART for point-to-point or module-based links.
What is the maximum clock speed of STM8L101F3U6TR?
The maximum CPU frequency of the STM8L101F3U6TR is 16 MHz, delivering up to 16 MIPS with its enhanced STM8 core. This clock rate is appropriate for compact control, communication and sensor-processing tasks rather than graphics or memory-intensive workloads. Firmware timing should be calculated against the selected operating mode and any low-power clock configuration.
Where can I download the STM8L101F3U6TR datasheet PDF?
The official STM8L101F3U6TR documentation is available through the STMicroelectronics STM8L101F3 product page and the linked manufacturer datasheet resources. The product page identifies the STM8L101x1, STM8L101x2 and STM8L101x3 low-power family and its enhanced STM8 core. Use the manufacturer pin-description and electrical-characteristics tables when assigning PCB connections.
Where can I find the STM8L101F3U6TR pinout?
The STM8L101F3U6TR pinout is documented in the manufacturer pin-description table for the 20-pin UFQFPN package. The component uses a compact 3 mm x 3 mm surface-mount package with an exposed pad, so both peripheral assignments and the exposed-pad layout must be checked before PCB release. Use the manufacturer diagram rather than assigning pins solely from a generic QFN drawing.
What is the best drop-in replacement for STM8L101F3U6TR?
The STM8L101F3U6ATR is the closest identified same-family drop-in candidate because it retains the STM8L101F3 configuration in the same 20-pin UFQFPN package. The verified cross-reference material does not identify five electrically and pin-compatible alternatives, so additional parts should not be treated as drop-in without engineering review. Confirm temperature grade, exposed-pad connection and firmware behavior against the manufacturer documentation.
Can STM8L101F3U6ATR replace STM8L101F3U6TR?
The STM8L101F3U6ATR can be evaluated as a same-package replacement for the STM8L101F3U6TR because both are identified as STM8L101F3 devices in 20-pin UFQFPN packages. Before substitution, verify the exact ordering-code temperature range, reel orientation, exposed-pad requirements and electrical limits. The manufacturer product documentation should control the final approval.
STM8L101F3U6TR vs STM8L101F3U6ATR - which should I choose?
Choose the STM8L101F3U6TR unless the STM8L101F3U6ATR ordering code provides a required temperature-grade or logistics advantage. Both are identified in the same STM8L101F3 family and 20-pin UFQFPN format, but the verified material does not provide a complete side-by-side ordering-code specification. Compare the manufacturer ordering information before deciding which exact suffix fits the product environment.
STM8L101F3U6TR vs STM8S003F3U6TR - which is better for a low-power design?
The STM8L101F3U6TR is generally the better choice when ultra-low-power operation is the primary requirement because it belongs to the STM8L EnergyLite family, while the STM8S003F3U6TR belongs to the STM8S line. The cross-reference material confirms a comparison page but does not establish complete pin-to-pin compatibility. Do not treat the STM8S003F3U6TR as a drop-in replacement without reviewing its pinout, memory map and low-power behavior.
When should I choose STM8L101F3U6TR over STM8S103F3U6TR?
Choose the STM8L101F3U6TR over the STM8S103F3U6TR when standby or sleep-mode energy use is more important than general-purpose processing capability. Both families use an STM8 core and offer 8 KB Flash according to the comparison material, but the STM8L101F3 is specifically positioned for ultra-low-power products. Validate peripheral assignments and software support before changing the MCU on an existing design.
Is STM8L101F3U6TR suitable for battery-powered sensor nodes?
Yes, the STM8L101F3U6TR is suitable for battery-powered sensor nodes because it is an ultra-low-power 8-bit MCU with low-voltage operation from 1.65 V to 3.6 V. Its I2C and SPI interfaces can connect local sensors, while the 16 MHz core provides adequate control throughput. Firmware and power-system design must still minimize active time and validate the actual battery-life requirement.
How do I choose between STM8L101F3U6TR and a cross-brand equivalent?
Choose the STM8L101F3U6TR unless a cross-brand device has been independently confirmed to match its 20-pin UFQFPN footprint, electrical ratings, peripheral mapping and software requirements. The verified cross-reference search does not identify a pin-compatible cross-brand substitute for this part. Changing MCU vendors can alter interrupt mapping, timer behavior, pin multiplexing and low-power modes even when the package drawings appear similar.
Where can I buy STM8L101F3U6TR and what is its current lead time?
Use the Request a Quote form on this page to request STM8L101F3U6TR availability, current lead time, minimum order quantity and order confirmation. The verified manufacturer storefront identifies the exact MPN for ordering, while distributor search results confirm its 20-pin UFQFPN configuration. Current supply status should be confirmed through the quote workflow because it can change by region and order quantity.
What is the price of STM8L101F3U6TR?
Use the Request a Quote form on this page for the current STM8L101F3U6TR price, quantity breaks and availability. The verified search results identify the exact ordering code but do not print a qualifying quantity-break table, so a current unit price cannot be copied accurately. The form also allows the requested reel quantity and delivery requirements to be stated with the inquiry.
What are the key specifications of STM8L101F3U6TR that engineers should know?
The STM8L101F3U6TR is an 8-bit ultra-low-power MCU with a 16 MHz maximum clock, up to 16 MIPS performance, 8 KB Flash, 1.5 KB RAM, 2K x 8-bit EEPROM and a 1.65 V to 3.6 V supply range. STMicroelectronics also identifies USART, SPI, I2C, multifunction timers and comparators. The device is packaged in a 20-pin, 3 mm x 3 mm UFQFPN surface-mount format.

Data referensi engineering untuk STM8L101F3U6TR — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the STM8L101F3U6TR for compact, battery-powered or intermittently powered products that need an 8-bit controller, 16 MHz processing and low-voltage operation without a large external peripheral set. Its 8 KB Flash and 1.5 KB RAM are adequate for focused control, sensing and serial-bridging tasks, but firmware and stack usage must be checked early. The STM8L101F3U6ATR is the closest identified same-family candidate when its exact ordering-code grade is preferred, subject to temperature and handling verification. The STM8S003F3U6TR and STM8S103F3U6TR are general-purpose STM8 comparisons, not confirmed drop-ins; consider them only after reviewing pin multiplexing, interrupt mapping, memory organization and low-power behavior. No verified cross-brand equivalent is identified, so a vendor change should not be assumed to preserve the footprint or firmware.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini STM8L101F3U6ATR
Brand STMicroelectronics STMicroelectronics
Package 20-pin UFQFPN, 3 mm x 3 mm 20-pin UFQFPN, 3 mm x 3 mm
CPU Architecture Enhanced 8-bit STM8 core Enhanced 8-bit STM8 core
Maximum CPU Frequency 16 MHz 16 MHz
Maximum Processing Performance Up to 16 MIPS at 16 MHz Up to 16 MIPS at 16 MHz
Flash Memory 8 KB Flash 8 KB Flash
RAM 1.5 KB 1.5 KB
Serial Interfaces USART, SPI and I2C USART, SPI and I2C

Diferensiator Kunci

  • Purpose-built for energy-sensitive embedded products (vsSTM8S003F3U6TR)
  • Broad serial connectivity within a compact package (vsSTM8L101F3U6ATR)
  • Low-voltage operation for compact embedded systems (vsSTM8L101F3U6ATR)

Catatan Desain

Use the manufacturer UFQFPN exposed-pad layout and place the supply decoupling capacitor adjacent to the appropriate power and ground pins. Keep the 3 mm by 3 mm footprint free of courtyard conflicts, and route high-current or switching-node copper away from the MCU and serial traces. The exposed pad should be connected according to the manufacturer land pattern and thermal guidance.

Power-budget the design from the 1.65 V to 3.6 V operating range rather than assuming a nominal supply alone. Account for startup current, active processing, timer and serial-interface activity, and the duration of each low-power state. Validate wake-up timing and peripheral state retention in firmware because a short measured sleep interval can still produce substantial battery load if frequent wake-ups dominate the operating profile.

Plan the firmware around 8 KB of Flash and 1.5 KB of RAM before committing to the device. Avoid libraries that provide unused peripheral initialization, and reserve stack space for interrupt nesting and serial buffers. Do not treat the STM8S003F3U6TR or STM8S103F3U6TR as drop-in parts merely because they have similar memory capacities; their peripheral and low-power behavior requires separate review.

Keep I2C routing short, use pull-up resistors selected for the bus voltage and capacitance, and avoid placing the bus next to switching or high-current traces. For SPI, maintain controlled clock edge rates and consider series damping if long branches or slower peripherals are connected. These practices reduce contention, ringing and the possibility that intermittent communication faults appear only during low-power transitions.

Informasi Konformitas

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

RoHS compliance is identified by the verified component listing. REACH, AEC-Q100, lead-free, halogen-free and conflict-minerals status are not established for the exact ordering code.

Data disahkan pada: 2026-11-15 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

STM8L101F3U6TR datasheet STM8L101F3U6TR datasheet pdf STM8L101F3U6TR pinout STM8L101F3U6TR equivalent STM8L101F3U6TR replacement STM8L101F3U6TR drop-in substitute STM8L101F3U6TR footprint STM8L101F3U6TR application circuit STM8L101F3U6TR price STM8L101F3U6TR stock STMicroelectronics STM8L101F3U6TR STM8L101F3U6TR vs STM8L101F3U6ATR

Komponen dan Istilah Terkait

STMicroelectronics STM8L101F3U6TR STM8L101F3U6ATR STM8S003F3U6TR STM8S103F3U6TR STM8L101F3 STM8L EnergyLite 8-bit microcontroller ultra-low-power microcontroller STM8 CPU core embedded microcontroller semiconductor USART SPI I2C multifunction timer comparator Flash memory RAM EEPROM 20-pin UFQFPN QFN family surface mount battery-powered sensor node supply voltage
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ