STM8L101F3U6TR - 8-Bit 16MHz Low-Power MCU | STMicroelectronics
Référence : STM8L101F3U6TR ✓ ActifSTM8L101F3U6TR Présentation
An ultra-low-power microcontroller is a semiconductor designed to maintain useful processing and peripheral performance while minimizing energy consumption in battery-powered or intermittently powered equipment. The STM8L101 belongs to the STM8L EnergyLite family, a low-power branch of the STM8 8-bit microcontroller portfolio. Its small package, embedded Flash and broad serial-interface support make it suitable for compact control and sensing products.
Key characteristics include up to 16 MIPS processing performance at 16 MHz, 8 KB of program Flash, 1.5 KB of RAM and an operating supply range of 1.65 V to 3.6 V. Integrated communication blocks include USART, SPI and I2C, while timers and comparators support local control, timing and threshold decisions without requiring separate peripheral devices.
The STM8L101F3 architecture is designed for energy-sensitive embedded systems where a low-power operating mode and a small package are more important than high pin count or large memory capacity. Its 20-pin UFQFPN package includes 3 mm by 3 mm footprint options, allowing the controller to be used in compact products while retaining exposed-pad thermal-management and high-density PCB-layout flexibility.
Typical uses include battery-powered sensors, compact industrial controllers, low-power serial gateways, wearable accessories and smart-home endpoints. USART and I2C can connect local sensors or an application processor, SPI supports higher-speed peripherals, and the timers can handle periodic sampling or actuator timing. Firmware selection must account for the 8 KB Flash and 1.5 KB RAM limits.
When designing the PCB, use a thermal-aware exposed-pad layout, place decoupling capacitors close to the supply pins and route the serial interfaces away from switching nodes. Confirm the complete pin assignment and exposed-pad connection against the STMicroelectronics pinout documentation before fabrication. Deep-sleep or stop-mode behavior should be validated against the system wake-up timing and measurement budget.
This product page consolidates the verified core specifications, a focused drop-in comparison, interface-oriented design guidance and practical application guidance. It helps engineers assess the STM8L101F3U6TR for compact, low-power embedded designs while highlighting memory constraints, package considerations and the need to verify pin-level implementation details.
Alternatives de remplacement direct pour STM8L101F3U6TR — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
STM8L101F3U6ATR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
STM8L101F3U6TR Valeurs maximales et caractéristiques électriques
| Product Type | 8-bit ultra-low-power microcontroller |
| CPU Architecture | Enhanced STM8 8-bit core |
| Maximum CPU Frequency | 16 MHz |
| Maximum Processing Performance | 16 MIPS at 16 MHz |
| Program Memory Size | 8 KB Flash |
| Flash Organization | 8K x 8 bits |
| RAM Size | 1.5 KB |
| EEPROM | 2K x 8 bits |
| Supply Voltage Range | 1.65 V to 3.6 V |
| Serial Interfaces | USART, SPI and I2C |
| Analog and Timing Resources | Comparators and multifunction timers |
| Oscillator | Internal oscillator |
| Plage de température de fonctionnement | -40 °C to +85 °C |
| Boîtier | 20-pin UFQFPN, 3 mm x 3 mm |
| Type de montage | Surface mount |
| Shipping Package | Tape and reel |
| Statut RoHS | Compliant |
Guide de configuration des broches du STM8L101F3U6TR tape and reel
Configuration des broches du STM8L101F3U6TR (boîtier tape and reel). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour STM8L101F3U6TR.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
STM8L101F3U6TR convient pour 3 applications: Systèmes embarqués, Appareils IoT, Commande industrielle.
Systèmes embarqués
Traitement central dans les applications embarquées à l'aide de STM8L101F3U6TR.
Appareils IoT
Appareils connectés intelligents alimentés par STM8L101F3U6TR.
Commande industrielle
Systèmes d'automatisation et de commande à l'aide de STM8L101F3U6TR.
Données de référence d'ingénierie pour STM8L101F3U6TR — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | STM8L101F3U6ATR |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Package | 20-pin UFQFPN, 3 mm x 3 mm | 20-pin UFQFPN, 3 mm x 3 mm |
| CPU Architecture | Enhanced 8-bit STM8 core | Enhanced 8-bit STM8 core |
| Maximum CPU Frequency | 16 MHz | 16 MHz |
| Maximum Processing Performance | Up to 16 MIPS at 16 MHz | Up to 16 MIPS at 16 MHz |
| Flash Memory | 8 KB Flash | 8 KB Flash |
| RAM | 1.5 KB | 1.5 KB |
| Serial Interfaces | USART, SPI and I2C | USART, SPI and I2C |
Principaux différenciateurs
- Purpose-built for energy-sensitive embedded products (vs STM8S003F3U6TR)
- Broad serial connectivity within a compact package (vs STM8L101F3U6ATR)
- Low-voltage operation for compact embedded systems (vs STM8L101F3U6ATR)
Notes de conception
Use the manufacturer UFQFPN exposed-pad layout and place the supply decoupling capacitor adjacent to the appropriate power and ground pins. Keep the 3 mm by 3 mm footprint free of courtyard conflicts, and route high-current or switching-node copper away from the MCU and serial traces. The exposed pad should be connected according to the manufacturer land pattern and thermal guidance.
Power-budget the design from the 1.65 V to 3.6 V operating range rather than assuming a nominal supply alone. Account for startup current, active processing, timer and serial-interface activity, and the duration of each low-power state. Validate wake-up timing and peripheral state retention in firmware because a short measured sleep interval can still produce substantial battery load if frequent wake-ups dominate the operating profile.
Plan the firmware around 8 KB of Flash and 1.5 KB of RAM before committing to the device. Avoid libraries that provide unused peripheral initialization, and reserve stack space for interrupt nesting and serial buffers. Do not treat the STM8S003F3U6TR or STM8S103F3U6TR as drop-in parts merely because they have similar memory capacities; their peripheral and low-power behavior requires separate review.
Keep I2C routing short, use pull-up resistors selected for the bus voltage and capacitance, and avoid placing the bus next to switching or high-current traces. For SPI, maintain controlled clock edge rates and consider series damping if long branches or slower peripherals are connected. These practices reduce contention, ringing and the possibility that intermittent communication faults appear only during low-power transitions.
Informations de conformité
RoHS compliance is identified by the verified component listing. REACH, AEC-Q100, lead-free, halogen-free and conflict-minerals status are not established for the exact ordering code.