STM8L101F3U6TR - 8-Bit 16MHz Low-Power MCU | STMicroelectronics
MPN: STM8L101F3U6TR ✓ 啟用中STM8L101F3U6TR 概覽
An ultra-low-power microcontroller is a semiconductor designed to maintain useful processing and peripheral performance while minimizing energy consumption in battery-powered or intermittently powered equipment. The STM8L101 belongs to the STM8L EnergyLite family, a low-power branch of the STM8 8-bit microcontroller portfolio. Its small package, embedded Flash and broad serial-interface support make it suitable for compact control and sensing products.
Key characteristics include up to 16 MIPS processing performance at 16 MHz, 8 KB of program Flash, 1.5 KB of RAM and an operating supply range of 1.65 V to 3.6 V. Integrated communication blocks include USART, SPI and I2C, while timers and comparators support local control, timing and threshold decisions without requiring separate peripheral devices.
The STM8L101F3 architecture is designed for energy-sensitive embedded systems where a low-power operating mode and a small package are more important than high pin count or large memory capacity. Its 20-pin UFQFPN package includes 3 mm by 3 mm footprint options, allowing the controller to be used in compact products while retaining exposed-pad thermal-management and high-density PCB-layout flexibility.
Typical uses include battery-powered sensors, compact industrial controllers, low-power serial gateways, wearable accessories and smart-home endpoints. USART and I2C can connect local sensors or an application processor, SPI supports higher-speed peripherals, and the timers can handle periodic sampling or actuator timing. Firmware selection must account for the 8 KB Flash and 1.5 KB RAM limits.
When designing the PCB, use a thermal-aware exposed-pad layout, place decoupling capacitors close to the supply pins and route the serial interfaces away from switching nodes. Confirm the complete pin assignment and exposed-pad connection against the STMicroelectronics pinout documentation before fabrication. Deep-sleep or stop-mode behavior should be validated against the system wake-up timing and measurement budget.
This product page consolidates the verified core specifications, a focused drop-in comparison, interface-oriented design guidance and practical application guidance. It helps engineers assess the STM8L101F3U6TR for compact, low-power embedded designs while highlighting memory constraints, package considerations and the need to verify pin-level implementation details.
直接替換替代品,適用於 STM8L101F3U6TR — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
STM8L101F3U6ATR
✅ 直接替換📋 參考替代品(不在目錄中)
STM8L101F3U6TR 最大額定值與電氣特性
| Product Type | 8-bit ultra-low-power microcontroller |
| CPU Architecture | Enhanced STM8 8-bit core |
| Maximum CPU Frequency | 16 MHz |
| Maximum Processing Performance | 16 MIPS at 16 MHz |
| Program Memory Size | 8 KB Flash |
| Flash Organization | 8K x 8 bits |
| RAM Size | 1.5 KB |
| EEPROM | 2K x 8 bits |
| Supply Voltage Range | 1.65 V to 3.6 V |
| Serial Interfaces | USART, SPI and I2C |
| Analog and Timing Resources | Comparators and multifunction timers |
| Oscillator | Internal oscillator |
| 工作溫度範圍 | -40 °C to +85 °C |
| 封裝 | 20-pin UFQFPN, 3 mm x 3 mm |
| 安裝類型 | Surface mount |
| Shipping Package | Tape and reel |
| RoHS 狀態 | Compliant |
STM8L101F3U6TR tape and reel 腳位配置指南
STM8L101F3U6TR(tape and reel 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: STM8L101F3U6TR.
請參閱 資料表 以查看完整腳位配置。
典型應用
STM8L101F3U6TR 適用於 3 應用s: 嵌入式系統, IoT 裝置, 工業控制.
嵌入式系統
使用 STM8L101F3U6TR 於嵌入式應用中進行核心處理。
IoT 裝置
由 STM8L101F3U6TR 驅動的智慧連網裝置。
工業控制
使用 STM8L101F3U6TR 的自動化與控制系統。
工程參考資料,適用於 STM8L101F3U6TR — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | STM8L101F3U6ATR |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Package | 20-pin UFQFPN, 3 mm x 3 mm | 20-pin UFQFPN, 3 mm x 3 mm |
| CPU Architecture | Enhanced 8-bit STM8 core | Enhanced 8-bit STM8 core |
| Maximum CPU Frequency | 16 MHz | 16 MHz |
| Maximum Processing Performance | Up to 16 MIPS at 16 MHz | Up to 16 MIPS at 16 MHz |
| Flash Memory | 8 KB Flash | 8 KB Flash |
| RAM | 1.5 KB | 1.5 KB |
| Serial Interfaces | USART, SPI and I2C | USART, SPI and I2C |
主要差異化特點
- Purpose-built for energy-sensitive embedded products (對比STM8S003F3U6TR)
- Broad serial connectivity within a compact package (對比STM8L101F3U6ATR)
- Low-voltage operation for compact embedded systems (對比STM8L101F3U6ATR)
設計說明
Use the manufacturer UFQFPN exposed-pad layout and place the supply decoupling capacitor adjacent to the appropriate power and ground pins. Keep the 3 mm by 3 mm footprint free of courtyard conflicts, and route high-current or switching-node copper away from the MCU and serial traces. The exposed pad should be connected according to the manufacturer land pattern and thermal guidance.
Power-budget the design from the 1.65 V to 3.6 V operating range rather than assuming a nominal supply alone. Account for startup current, active processing, timer and serial-interface activity, and the duration of each low-power state. Validate wake-up timing and peripheral state retention in firmware because a short measured sleep interval can still produce substantial battery load if frequent wake-ups dominate the operating profile.
Plan the firmware around 8 KB of Flash and 1.5 KB of RAM before committing to the device. Avoid libraries that provide unused peripheral initialization, and reserve stack space for interrupt nesting and serial buffers. Do not treat the STM8S003F3U6TR or STM8S103F3U6TR as drop-in parts merely because they have similar memory capacities; their peripheral and low-power behavior requires separate review.
Keep I2C routing short, use pull-up resistors selected for the bus voltage and capacitance, and avoid placing the bus next to switching or high-current traces. For SPI, maintain controlled clock edge rates and consider series damping if long branches or slower peripherals are connected. These practices reduce contention, ringing and the possibility that intermittent communication faults appear only during low-power transitions.
合規資訊
RoHS compliance is identified by the verified component listing. REACH, AEC-Q100, lead-free, halogen-free and conflict-minerals status are not established for the exact ordering code.