Texas Instruments

THS1030CPW - 10-Bit 30 MSPS ADC | Texas Instruments

MPN: THS1030CPW ✓ Aktif
3 V to 5.5 V Vdss 28-TSSOP Package
MOQ: 1 |

THS1030CPW Ringkasan

The Texas Instruments THS1030CPW is a 10-bit, 30 MSPS CMOS analog-to-digital converter with one analog input, pipelined conversion, and a 28-pin TSSOP package. It operates from a 3 V to 5.5 V supply and accepts either single-ended or differential analog signals, making it suitable for compact high-speed data-acquisition systems.

An analog-to-digital converter is an ADC that translates a continuous analog voltage into a numeric code. The THS1030 belongs to the hierarchy of data-converter IC, analog-to-digital converter, ADC, and semiconductor. Its 10-bit resolution provides 1,024 digital codes, while the 30 MSPS conversion rate supports acquisition of rapidly changing signals when paired with appropriate input and reference circuits.

Key features include a 3 V to 5.5 V operating range, 30 MSPS sampling performance, and support for single-ended or differential inputs. The device also offers selectable internal or external voltage references, an overrange indication function, and a power-down option. Its 28-TSSOP package has a stated width of approximately 4.40 mm, supporting compact surface-mount layouts.

The CMOS architecture supports low-power operation in portable and embedded instrumentation. A pipelined ADC is suitable for repeated sampling because it separates sampling and conversion into internal stages. Designers must still account for conversion latency, acquisition time, input settling, clock quality, and reference accuracy when interpreting sampled data or configuring digital timing.

Typical uses include industrial process monitoring, communications receivers, medical instrumentation, radar and signal-processing front ends, laboratory measurement equipment, and embedded control systems. Single-ended operation simplifies entry-level designs, while differential input support can improve common-mode rejection when the source is balanced and the analog front end is designed accordingly.

PCB implementation requires a low-impedance reference return, short analog traces, and stable supply decoupling close to the device. Input and reference networks should minimize parasitic capacitance because the 30 MSPS operating rate limits the available settling interval. The manufacturer datasheet should be used to assign every pin and select the external or internal reference configuration.

This product record combines the manufacturer’s electrical and package information with cross-reference results, application guidance, and practical design considerations. It supports faster component identification while preserving the distinctions needed to assess pin compatibility, acquisition timing, reference implementation, and PCB layout requirements.

Alternatif penggantian untuk THS1030CPW — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian THS1030CPW (sama faktor bentuk dan footprint) — berbeda di dalam RoHS Status, Package, Architecture, Resolution, Temperature Grade.

Texas Instruments
RoHS Status: Compliant
Architecture: Pipelined
Resolution: 10 bit
Bandingkan dengan THS1030CPW →
Texas Instruments
Package: 28-pin TSSOP
Resolution: 10 bit
Bandingkan dengan THS1030CPW →
Texas Instruments
RoHS Status: Compliant (G4 suffix denotes lead-free / green)
Architecture: Pipelined
Temperature Grade: Industrial
Bandingkan dengan THS1030CPW →
Texas Instruments
RoHS Status: Compliant
Package: TSSOP-28 (PW) 9.7 mm x 4.4 mm
Architecture: Pipelined
Bandingkan dengan THS1030CPW →

THS1030IPW

✅ Drop-In
Texas Instruments
📦 28-TSSOP
10 bit · 30 MSPS · Pipelined · Single-ended or differential · 1 input · Parallel · 3 V to 5.5 V · -40°C to +85°C

Kontak untuk harga

Lihat Datasheet →

THS1031CPW

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Texas Instruments
📦 28-TSSOP
Single-input pipelined ADC · 10 bit · 30 MSPS · 1 input · 3 V to 5.5 V · Parallel · CMOS · 28-pin TSSOP

Kontak untuk harga

Lihat Datasheet →

THS1031IPWG4

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Texas Instruments
📦 28-TSSOP
10 · 30 MSPS · 1 · Single-Ended (configurable) · Parallel · Pipelined · 3.0 V to 5.5 V · -40C to +85C

Kontak untuk harga

Lihat Datasheet →

THS1031IPWRG4

✅ Drop-In
Texas Instruments
📦 28-TSSOP
10 bits · 30 MSPS · 1 channel · Pipelined · Single-ended / Differential (configurable) · 3 V (typical, single supply) · Single-ended, SE + analog clamp, SE + digital clamp, differential · Yes, programmable gain

Kontak untuk harga

Lihat Datasheet →

THS1030CPW Rating Maksimal & Karakteristik Listrik

ADC Resolution 10 bit
Maximum Sampling Rate 30 MSPS
Analog Input Count 1 input
Architecture Pipelined CMOS ADC
Supply Voltage Range 3 V to 5.5 V
Analog Input Mode Single-ended or differential
Reference Options Internal or external voltage reference
Maximum Linearity Error 0.1953%
Power-Down Function Supported
Overrange Indication Supported
Paket 28-TSSOP
Package Width 4.40 mm
Package Width (Imperial) 0.173 inch
Terminal Count 28 terminals
Tipe Mounting Surface mount
Process Technology CMOS
Status RoHS unknown
REACH Status unknown
AEC-Q100 Qualification unknown

Konfigurasi Pin THS1030CPW

TSSOP-28 (4.4mm) Package Pinout Diagram TSSOP-28 4.4x9.7mm, P0.65mm, JEDEC MO-153. 28-pin thin shrink. 1 28 2 27 3 26 4 25 5 24 6 23 7 22 8 21 9 20 10 19 11 18 12 17 13 16 14 15 TSSOP-28 (4.4mm)
Pin produk 1 Not specified — Pin function should be confirmed from the manufacturer datasheet.
Pin produk 2 Not specified — Pin function should be confirmed from the manufacturer datasheet.
Pin produk 3 Not specified — Pin function should be confirmed from the manufacturer datasheet.
Pin produk 4 Not specified — Pin function should be confirmed from the manufacturer datasheet.
Pin produk 5 Not specified — Pin function should be confirmed from the manufacturer datasheet.
Pin produk 6 Not specified — Pin function should be confirmed from the manufacturer datasheet.
Pin produk 7 Not specified — Pin function should be confirmed from the manufacturer datasheet.
Pin produk 8 Not specified — Pin function should be confirmed from the manufacturer datasheet.
Pin produk 9 Not specified — Pin function should be confirmed from the manufacturer datasheet.
Pin produk 10 Not specified — Pin function should be confirmed from the manufacturer datasheet.
Pin produk 11 Not specified — Pin function should be confirmed from the manufacturer datasheet.
Pin produk 12 Not specified — Pin function should be confirmed from the manufacturer datasheet.
Pin produk 13 Not specified — Pin function should be confirmed from the manufacturer datasheet.
Pin produk 14 Not specified — Pin function should be confirmed from the manufacturer datasheet.
Pin produk 15 Not specified — Pin function should be confirmed from the manufacturer datasheet.
Pin produk 16 Not specified — Pin function should be confirmed from the manufacturer datasheet.
Pin produk 17 Not specified — Pin function should be confirmed from the manufacturer datasheet.
Pin produk 18 Not specified — Pin function should be confirmed from the manufacturer datasheet.
Pin produk 19 Not specified — Pin function should be confirmed from the manufacturer datasheet.
Pin produk 20 Not specified — Pin function should be confirmed from the manufacturer datasheet.
Pin produk 21 Not specified — Pin function should be confirmed from the manufacturer datasheet.
Pin produk 22 Not specified — Pin function should be confirmed from the manufacturer datasheet.
Pin produk 23 Not specified — Pin function should be confirmed from the manufacturer datasheet.
Pin produk 24 Not specified — Pin function should be confirmed from the manufacturer datasheet.
Pin produk 25 Not specified — Pin function should be confirmed from the manufacturer datasheet.
Pin produk 26 Not specified — Pin function should be confirmed from the manufacturer datasheet.
Pin produk 27 Not specified — Pin function should be confirmed from the manufacturer datasheet.
Pin produk 28 Not specified — Pin function should be confirmed from the manufacturer datasheet.

Aplikasi Umum

THS1030CPW cocok untuk 6 aplikasis: Industrial Process Monitoring, Communications Receiver Front End, Medical Signal Acquisition, Laboratory Measurement Equipment, Radar and Signal Processing, Embedded Data Acquisition.

🏭

Industrial Process Monitoring

The THS1030CPW fits process-measurement front ends that need faster sampling than a low-rate general-purpose ADC while accepting a 10-bit result. Its 30 MSPS conversion capability is useful when monitoring transducers, pressure elements, or level signals with changing waveforms. The 3 V to 5.5 V supply range supports embedded acquisition electronics. Designers should provide a low-noise reference, short input traces, and local decoupling, and must verify that the analog input remains within the converter’s full-scale range.

🌐

Communications Receiver Front End

The THS1030CPW can serve as the sampling element in a communications receiver when the required occupied bandwidth fits a 10-bit, 30 MSPS converter. Single-ended input support simplifies the connection to a demodulator or detector, while differential input support can improve common-mode rejection in a balanced RF or IF chain. The main system trade-off is resolution: 10 bits provide 1,024 output codes, so gain control, filtering, and careful reference design may be needed to preserve weak-signal fidelity.

💊

Medical Signal Acquisition

The THS1030CPW is applicable to medical instrumentation when a 30 MSPS sampling ADC is sufficient for the signal bandwidth and the design requires a 28-TSSOP footprint. It can digitize bounded sensor outputs such as pressure, flow, or bioelectric signals after suitable conditioning and protection. Because this is a general-purpose converter rather than a medical-specific device, developers must implement applicable clinical validation, electrical isolation, leakage, and regulatory controls around the selected system architecture.

🔧

Laboratory Measurement Equipment

The THS1030CPW suits laboratory instruments that sample repetitive waveforms and require compact, single-channel digitization. Its 10-bit resolution and 30 MSPS maximum rate provide a practical combination for oscilloscope-like measurements, waveform characterization, and automated test systems. Differential operation can reduce sensitivity to common-mode noise when paired with a balanced driver. For precision measurements, add input protection, an accurate low-noise reference, and calibration; resolution alone does not determine total measurement accuracy.

✈️

Radar and Signal Processing

The THS1030CPW can digitize intermediate-frequency or envelope signals in compact radar and signal-processing modules where 30 MSPS is adequate. Its pipelined CMOS architecture is appropriate for repeated sampling, while single-ended and differential input options support different receiver topologies. The converter’s 10-bit resolution limits dynamic range, so system designers should use gain control, analog filtering, and dithering or calibration where appropriate. Layout must minimize clock coupling into the analog input and reference nodes.

🧩

Embedded Data Acquisition

The THS1030CPW fits embedded acquisition modules that must capture sensor data rapidly while using a compact surface-mount package. Its 3 V to 5.5 V operating range accommodates both 3.3 V and 5 V systems, and its power-down function can reduce consumption when continuous sampling is unnecessary. A practical implementation needs a stable clock, local bypass capacitors, a controlled reference, and firmware that accounts for pipeline latency and valid-data timing when reconstructing the input waveform.

What is the resolution and sampling rate of THS1030CPW?
The THS1030CPW provides 10-bit resolution and a maximum sampling rate of 30 MSPS. According to the Texas Instruments product page, it is a CMOS, low-power analog-to-digital converter designed for high-speed signal acquisition. Its 10-bit output represents each converted sample with 1,024 possible codes, while the 30 MSPS rate permits up to 30 million conversion operations per second.
What supply voltage does THS1030CPW operate from?
The THS1030CPW operates from 3 V to 5.5 V. Texas Instruments describes the device as a CMOS, low-power ADC with that supply range. The manufacturer also identifies 3 V and 5 V operating arrangements, allowing the converter to be used in both lower-voltage portable systems and conventional 5 V embedded instrumentation.
Does THS1030CPW support single-ended and differential inputs?
Yes, the THS1030CPW supports both single-ended and differential analog inputs. Texas Instruments specifically describes this flexibility in the THS1030 product information. Single-ended inputs simplify many designs, while differential inputs can provide better rejection of common-mode noise when used with a balanced source and a correctly configured analog front end.
Where can I download the THS1030CPW datasheet PDF?
The official THS1030CPW datasheet can be obtained through the Texas Instruments product literature page at https://www.ti.com/cn/lit/gpn/THS1030. The manufacturer literature identifies the device as a 3 V to 5.5 V, 10-bit, 30 MSPS CMOS analog-to-digital converter. Use the pin-description table and electrical-characteristics tables there when assigning PCB nets and calculating timing margins.
What package and pin count does THS1030CPW use?
The THS1030CPW uses a 28-pin TSSOP surface-mount package. Distributor technical listings identify the package as 28-TSSOP, with an indicated width of approximately 4.40 mm, equivalent to the listed 0.173 inch dimension. Because the package contains 28 terminals, its footprint and land pattern must be matched to the 28-lead TSSOP dimensions rather than a 28-pin SOIC footprint.
What are the key specifications of THS1030CPW that engineers should know?
The key specifications are 10-bit resolution, a 30 MSPS maximum sampling rate, a 3 V to 5.5 V supply range, and a 28-TSSOP package. Texas Instruments also identifies pipelined CMOS conversion, single-ended or differential input support, internal or external reference options, a power-down function, and overrange indication. These parameters establish its suitability for compact, high-speed data-acquisition designs.
Can THS1030IPW replace THS1030CPW?
The THS1030IPW is identified as a complete replacement candidate because its terminals, package, and principal functional characteristics are consistent with the THS1030CPW. Both use the 28-TSSOP format and belong to the same THS1030 family. Review the ordering temperature grade, acquisition timing, reference setup, and production status in the manufacturer documentation before releasing the substitution.
What is the best drop-in replacement for THS1030CPW?
The THS1030IPW is the closest same-family drop-in candidate identified for the THS1030CPW because the package and terminal arrangement remain unchanged. The THS1031-family devices may also fit the 28-TSSOP footprint, but they can differ in conversion performance and timing, so they require a more detailed functional review. No additional distinct, fully verified drop-in candidates were established.
When should I choose THS1030CPW over THS1031CPW?
Choose the THS1030CPW when a 30 MSPS, 10-bit converter is sufficient and the application does not require the faster performance associated with the THS1031 family. The THS1031CPW should be considered only after confirming that its sampling rate, acquisition timing, output latency, reference behavior, and power requirements remain compatible with the existing signal chain.
Is THS1030CPW suitable for industrial instrumentation?
The THS1030CPW is suitable for many industrial instrumentation applications that require moderate-resolution, high-speed sampling. Its 10-bit resolution and 30 MSPS rate suit sensor, process, and signal-monitoring front ends, but the operating temperature grade must be checked against the enclosure temperature. Industrial suitability does not by itself establish extended-temperature or functional-safety qualification.
What power and thermal considerations apply to THS1030CPW?
Thermal design should begin with the actual analog, digital, and reference power consumption at the selected clock rate and supply voltage. Texas Instruments identifies the THS1030 as a low-power CMOS converter, but current values, junction temperature limits, and thermal resistance are not stated in the product listing. Use the manufacturer electrical characteristics and thermal information before estimating board heating.
How should THS1030CPW be referenced on a PCB?
Route the reference and analog-input networks with short traces and return connections, and place supply-decoupling capacitors close to the relevant device pins. The 30 MSPS sampling rate limits the time available for input settling, so excessive loop area, parasitic capacitance, and long reference traces can degrade conversion performance. Ground the analog and digital return paths carefully according to the manufacturer reference circuit.
What is the difference between THS1030CPW and THS1030CDW?
The primary difference is the package: THS1030CPW is a 28-TSSOP device, while THS1030CDW is identified as a 28-SOIC variant. Their identical package-pin count does not make them PCB drop-in replacements because SOIC and TSSOP have different lead geometry, body dimensions, and land patterns. A board change or footprint redesign is required when moving between those packages.
Where can I buy THS1030CPW and check current availability?
Use the Request a Quote form on this page to request current THS1030CPW availability, minimum order quantity, and lead time. The form is the appropriate route for a quote-based purchase and for checking whether production quantities can be allocated. Product identification should include the complete MPN THS1030CPW and the required 28-TSSOP package configuration.
How much does THS1030CPW cost and what is its lead time?
Current THS1030CPW price and lead time must be requested through the Request a Quote form on this page. The quote request should specify the required quantity, 28-TSSOP package, target shipment date, and any date-code or traceability requirements. This avoids relying on an outdated catalog figure when planning a production procurement.
Is THS1030CPW RoHS compliant and qualified for automotive use?
The RoHS, REACH, halogen-free, lead-free, and AEC-Q100 status of THS1030CPW are not established by the manufacturer information available for this record. Do not infer automotive qualification from industrial or communications suitability. Request the current material-compliance declaration and qualification documentation from Texas Instruments before using the device in an automotive or regulated production program.

Data referensi engineering untuk THS1030CPW — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the THS1030CPW for a compact single-channel acquisition system requiring 10-bit resolution, up to 30 MSPS operation, and a 3 V to 5.5 V supply. Select THS1030IPW when the same electrical and package configuration is needed but the ordering-temperature grade better matches the product environment. Consider THS1031CPW, THS1031IPW, or THS1031IPWRG4 when their detailed acquisition rate, timing, latency, and reference behavior satisfy the design and the unchanged 28-TSSOP footprint is confirmed. Do not substitute THS1030CDW on the existing PCB: its 28-SOIC package has different mechanical dimensions and land pattern. For any proposed replacement, verify power consumption, clock polarity, output coding, reference voltage, overrange behavior, and acquisition settling before production release.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini THS1030IPW THS1031CPW THS1031IPW THS1031IPWRG4
Package 28-TSSOP 28-TSSOP - same 28-TSSOP - same 28-TSSOP - same 28-TSSOP - same
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
ADC Resolution 10 bit 10 bit 10 bit 10 bit 10 bit

Diferensiator Kunci

  • Matches the 10-bit, 30 MSPS conversion profile of the closest family replacement (vsTHS1030IPW)
  • Provides a documented same-package path within the broader THS1031 family (vsTHS1031CPW)
  • Uses a compact surface-mount ADC package for space-constrained acquisition systems (vsTHS1030CDW)

Catatan Desain

Place the input, reference, and supply-decoupling networks close to the THS1030CPW and keep their return paths short. At the maximum 30 MSPS sampling rate, source impedance and parasitic capacitance can restrict settling accuracy. Follow the manufacturer reference circuit for capacitor values and component placement, and use a solid ground reference for both analog and digital return currents.

Keep the sampling clock away from the analog input and reference nodes, and terminate the clock according to the manufacturer’s timing and layout guidance. Clock jitter and supply noise can degrade an otherwise correct 10-bit conversion. Differential input operation requires close attention to common-mode voltage, impedance balance, and connector or driver matching; neither single-ended nor differential mode eliminates the need for an accurate reference.

Do not treat the 10-bit code width as the complete accuracy specification. Offset error, gain error, nonlinearity, reference accuracy, input settling, and missing output codes can each affect the result. Validate the complete analog chain against the required measurement bandwidth, and account for pipeline latency when aligning converted samples with time-domain events.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Material-compliance and automotive-qualification declarations are not stated in the available manufacturer product information. Obtain current documentation from Texas Instruments before regulated production use.

Data disahkan pada: 2026-11-16 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

THS1030CPW datasheet THS1030CPW specifications THS1030CPW pinout THS1030CPW datasheet pdf THS1030CPW 28-TSSOP footprint THS1030CPW equivalent THS1030CPW replacement THS1030CPW vs THS1030IPW THS1030CPW 10-bit 30 MSPS ADC Texas Instruments THS1030CPW THS1030CPW price THS1030CPW stock THS1030CPW application circuit THS1030CPW cross reference

Komponen dan Istilah Terkait

Texas Instruments THS1030CPW THS1030IPW THS1031CPW THS1031IPW THS1031IPWRG4 THS1030CDW analog-to-digital converter ADC data-converter IC pipelined ADC CMOS 10-bit resolution 30 MSPS single-ended input differential input internal voltage reference external voltage reference overrange indication power-down function 28-TSSOP TSSOP package surface-mount package industrial instrumentation medical signal acquisition
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ