THS1030CPW - 10-Bit 30 MSPS ADC | Texas Instruments
MPN: THS1030CPW ✓ Hoạt độngTHS1030CPW Tóm tắt
An analog-to-digital converter is an ADC that translates a continuous analog voltage into a numeric code. The THS1030 belongs to the hierarchy of data-converter IC, analog-to-digital converter, ADC, and semiconductor. Its 10-bit resolution provides 1,024 digital codes, while the 30 MSPS conversion rate supports acquisition of rapidly changing signals when paired with appropriate input and reference circuits.
Key features include a 3 V to 5.5 V operating range, 30 MSPS sampling performance, and support for single-ended or differential inputs. The device also offers selectable internal or external voltage references, an overrange indication function, and a power-down option. Its 28-TSSOP package has a stated width of approximately 4.40 mm, supporting compact surface-mount layouts.
The CMOS architecture supports low-power operation in portable and embedded instrumentation. A pipelined ADC is suitable for repeated sampling because it separates sampling and conversion into internal stages. Designers must still account for conversion latency, acquisition time, input settling, clock quality, and reference accuracy when interpreting sampled data or configuring digital timing.
Typical uses include industrial process monitoring, communications receivers, medical instrumentation, radar and signal-processing front ends, laboratory measurement equipment, and embedded control systems. Single-ended operation simplifies entry-level designs, while differential input support can improve common-mode rejection when the source is balanced and the analog front end is designed accordingly.
PCB implementation requires a low-impedance reference return, short analog traces, and stable supply decoupling close to the device. Input and reference networks should minimize parasitic capacitance because the 30 MSPS operating rate limits the available settling interval. The manufacturer datasheet should be used to assign every pin and select the external or internal reference configuration.
This product record combines the manufacturer’s electrical and package information with cross-reference results, application guidance, and practical design considerations. It supports faster component identification while preserving the distinctions needed to assess pin compatibility, acquisition timing, reference implementation, and PCB layout requirements.
Bộ thay thế dễ dàng lắp đặt cho THS1030CPW — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với THS1030CPW (cùng hình factor và footprint) — khác nhau ở RoHS Status, Package, Architecture, Resolution, Temperature Grade.
THS1030IPW
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →THS1031CPW
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →THS1031IPWG4
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →THS1031IPWRG4
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →THS1030CPW Tỷ lệ tối đa & tính chất điện
| ADC Resolution | 10 bit |
| Maximum Sampling Rate | 30 MSPS |
| Analog Input Count | 1 input |
| Architecture | Pipelined CMOS ADC |
| Supply Voltage Range | 3 V to 5.5 V |
| Analog Input Mode | Single-ended or differential |
| Reference Options | Internal or external voltage reference |
| Maximum Linearity Error | 0.1953% |
| Power-Down Function | Supported |
| Overrange Indication | Supported |
| Hộp | 28-TSSOP |
| Package Width | 4.40 mm |
| Package Width (Imperial) | 0.173 inch |
| Terminal Count | 28 terminals |
| Kiểu lắp đặt | Surface mount |
| Process Technology | CMOS |
| Trạng thái RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
Cấu hình chân THS1030CPW
| Chân 1 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
| Chân 2 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
| Chân 3 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
| Chân 4 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
| Chân 5 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
| Chân 6 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
| Chân 7 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
| Chân 8 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
| Chân 9 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
| Chân 10 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
| Chân 11 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
| Chân 12 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
| Chân 13 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
| Chân 14 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
| Chân 15 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
| Chân 16 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
| Chân 17 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
| Chân 18 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
| Chân 19 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
| Chân 20 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
| Chân 21 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
| Chân 22 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
| Chân 23 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
| Chân 24 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
| Chân 25 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
| Chân 26 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
| Chân 27 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
| Chân 28 | Not specified — Pin function should be confirmed from the manufacturer datasheet. |
Ứng dụng tiêu biểu
THS1030CPW phù hợp cho 6 Áp dụngs: Industrial Process Monitoring, Communications Receiver Front End, Medical Signal Acquisition, Laboratory Measurement Equipment, Radar and Signal Processing, Embedded Data Acquisition.
Industrial Process Monitoring
The THS1030CPW fits process-measurement front ends that need faster sampling than a low-rate general-purpose ADC while accepting a 10-bit result. Its 30 MSPS conversion capability is useful when monitoring transducers, pressure elements, or level signals with changing waveforms. The 3 V to 5.5 V supply range supports embedded acquisition electronics. Designers should provide a low-noise reference, short input traces, and local decoupling, and must verify that the analog input remains within the converter’s full-scale range.
Được đề xuất
Communications Receiver Front End
The THS1030CPW can serve as the sampling element in a communications receiver when the required occupied bandwidth fits a 10-bit, 30 MSPS converter. Single-ended input support simplifies the connection to a demodulator or detector, while differential input support can improve common-mode rejection in a balanced RF or IF chain. The main system trade-off is resolution: 10 bits provide 1,024 output codes, so gain control, filtering, and careful reference design may be needed to preserve weak-signal fidelity.
Được đề xuất
Medical Signal Acquisition
The THS1030CPW is applicable to medical instrumentation when a 30 MSPS sampling ADC is sufficient for the signal bandwidth and the design requires a 28-TSSOP footprint. It can digitize bounded sensor outputs such as pressure, flow, or bioelectric signals after suitable conditioning and protection. Because this is a general-purpose converter rather than a medical-specific device, developers must implement applicable clinical validation, electrical isolation, leakage, and regulatory controls around the selected system architecture.
Được đề xuất
Laboratory Measurement Equipment
The THS1030CPW suits laboratory instruments that sample repetitive waveforms and require compact, single-channel digitization. Its 10-bit resolution and 30 MSPS maximum rate provide a practical combination for oscilloscope-like measurements, waveform characterization, and automated test systems. Differential operation can reduce sensitivity to common-mode noise when paired with a balanced driver. For precision measurements, add input protection, an accurate low-noise reference, and calibration; resolution alone does not determine total measurement accuracy.
Được đề xuất
Radar and Signal Processing
The THS1030CPW can digitize intermediate-frequency or envelope signals in compact radar and signal-processing modules where 30 MSPS is adequate. Its pipelined CMOS architecture is appropriate for repeated sampling, while single-ended and differential input options support different receiver topologies. The converter’s 10-bit resolution limits dynamic range, so system designers should use gain control, analog filtering, and dithering or calibration where appropriate. Layout must minimize clock coupling into the analog input and reference nodes.
Được đề xuất
Embedded Data Acquisition
The THS1030CPW fits embedded acquisition modules that must capture sensor data rapidly while using a compact surface-mount package. Its 3 V to 5.5 V operating range accommodates both 3.3 V and 5 V systems, and its power-down function can reduce consumption when continuous sampling is unnecessary. A practical implementation needs a stable clock, local bypass capacitors, a controlled reference, and firmware that accounts for pipeline latency and valid-data timing when reconstructing the input waveform.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho THS1030CPW — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | THS1030IPW | THS1031CPW | THS1031IPW | THS1031IPWRG4 |
|---|---|---|---|---|---|
| Package | 28-TSSOP | 28-TSSOP - same | 28-TSSOP - same | 28-TSSOP - same | 28-TSSOP - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| ADC Resolution | 10 bit | 10 bit | 10 bit | 10 bit | 10 bit |
Bảo phân biệt quan trọng
- Matches the 10-bit, 30 MSPS conversion profile of the closest family replacement (vsTHS1030IPW)
- Provides a documented same-package path within the broader THS1031 family (vsTHS1031CPW)
- Uses a compact surface-mount ADC package for space-constrained acquisition systems (vsTHS1030CDW)
Ghi chú thiết kế
Place the input, reference, and supply-decoupling networks close to the THS1030CPW and keep their return paths short. At the maximum 30 MSPS sampling rate, source impedance and parasitic capacitance can restrict settling accuracy. Follow the manufacturer reference circuit for capacitor values and component placement, and use a solid ground reference for both analog and digital return currents.
Keep the sampling clock away from the analog input and reference nodes, and terminate the clock according to the manufacturer’s timing and layout guidance. Clock jitter and supply noise can degrade an otherwise correct 10-bit conversion. Differential input operation requires close attention to common-mode voltage, impedance balance, and connector or driver matching; neither single-ended nor differential mode eliminates the need for an accurate reference.
Do not treat the 10-bit code width as the complete accuracy specification. Offset error, gain error, nonlinearity, reference accuracy, input settling, and missing output codes can each affect the result. Validate the complete analog chain against the required measurement bandwidth, and account for pipeline latency when aligning converted samples with time-domain events.
Thông tin tuân thủ
Material-compliance and automotive-qualification declarations are not stated in the available manufacturer product information. Obtain current documentation from Texas Instruments before regulated production use.