Texas Instruments

TLV2761ID - 500kHz RRIO Micro-Power Op Amp | Texas Instruments

MPN: TLV2761ID ✓ Aktif
1.8 V to 3.6 V recommended maximum Vdss 20 µA Id 8-pin SOIC (D) Package
MOQ: 1 |

TLV2761ID Ringkasan

The Texas Instruments TLV2761ID is a single-circuit, rail-to-rail input/output operational amplifier designed for low-voltage, low-power signal conditioning. It operates from a 1.8 V supply, supports supply voltages up to the recommended 3.6 V maximum, and provides a 500 kHz gain-bandwidth product while drawing only 20 µA of operating current. The device is offered in an 8-pin SOIC package for the industrial temperature range from -40°C to +85°C.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its differential inputs while using feedback to set the closed-loop gain. The TLV2761 belongs to the rail-to-rail-input/output, or RRIO, family of voltage-feedback amplifiers. Rail-to-rail input operation improves dynamic range in low-voltage systems because the input common-mode range can extend toward both supply rails, while rail-to-rail output operation provides useful output swing near the available supply limits.

The TLV2761ID combines 500 kHz bandwidth with approximately 20 µA operating current, making it suitable for portable and low-energy systems where converter size, signal bandwidth, and current consumption are all important. Its single-supply architecture supports operation from 1.8 V, a useful voltage range for coin cells, two alkaline cells, and low-voltage sensor systems. The single amplifier configuration also avoids unnecessary circuit area when only one gain stage is required.

The TLV2761 family provides rail-to-rail input and output capability in a compact low-power implementation. Its 500 kHz bandwidth is sufficient for low- and moderate-frequency precision signal paths, including sensor interfaces, current measurements, and buffered analog signals. The 20 µA operating current supports energy-efficient acquisition systems, although a design requiring high closed-loop gain must confirm that the resulting settling behavior and noise meet its bandwidth requirements.

Because the maximum recommended supply voltage is 3.6 V, the TLV2761ID should not be treated as a conventional 5 V or higher-voltage amplifier. Designators commonly use single, positive supply operation for battery-powered instrumentation. The device is available in an 8-pin SOIC package, simplifying assembly on both prototype boards and production PCBs using standard surface-mount processes.

When connecting external circuitry, keep feedback resistors close to the amplifier pins and route input and output traces away from switching nodes and high-current paths. Decoupling capacitors should connect to a low-impedance ground plane with short traces. Because RRIO amplifiers can operate close to their supply rails, input and output signals must remain within the device's absolute maximum and operating limits, including during power-up and shutdown transitions.

This page combines the Texas Instruments product specifications with practical selection, replacement, layout, and sourcing guidance. It also identifies the distinction between electrically similar TLV2761 ordering codes and explains why package, temperature grade, and shutdown capability must be checked before treating any replacement as a true drop-in choice.

Alternatif penggantian untuk TLV2761ID — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian TLV2761ID (sama faktor bentuk dan footprint) — berbeda di dalam Amplifier Type, Package, Operating Temperature Range, Input Common-Mode Range, Supply Voltage Range.

Texas Instruments
Amplifier Type: General Purpose Operational Amplifier, Rail-to-Rail Input/Output
Package: 8-SOIC (0.154 in, 3.90 mm width)
Operating Temperature Range: 0 °C to 70 °C
Bandingkan dengan TLV2761ID →
Texas Instruments
Amplifier Type: 1 circuit operational amplifier
Package: 8-pin SOIC
Input Common-Mode Range: Rail-to-rail
Bandingkan dengan TLV2761ID →

TLV2761CD

✅ Drop-In
📦 8-pin SOIC (D)
Same TLV2761 family, 500 kHz bandwidth, 1.8 V minimum supply, and 8-pin SOIC footprint; the CD ordering code adds a shutdown function and uses a 0°C to +70°C temperature grade versus -40°C to +85°C for TLV2761ID

📋 Alternatif referensi (tidak dalam katalog)

TLV2761CDG4

✅ Drop-In
📦 8-pin SOIC (D)
Same TLV2761 family and 8-pin SOIC footprint with consistent terminals and performance; shutdown is included and the commercial temperature grade is 0°C to +70°C versus -40°C to +85°C for TLV2761ID

📋 Alternatif referensi (tidak dalam katalog)

TLV2761ID Rating Maksimal & Karakteristik Listrik

Amplifier Type Single voltage-feedback operational amplifier
Number of Circuits 1 circuit
Supply Voltage Range 1.8 V to 3.6 V recommended maximum
Maximum Recommended Supply Voltage 3.6 V
Minimum Operating Supply Voltage 1.8 V
Gain-Bandwidth Product 500 kHz
Operating Current 20 µA
Input Type Rail-to-rail input
Tipe Output Rail-to-rail output
Supply Type Single supply
Rentang Suhu Kerja -40°C to +85°C
Paket 8-pin SOIC (D)
Tipe Mounting Surface mount
Product Classification Standard general-purpose amplifier
Battery Compatibility Operation from 1.8 V, suitable for two AA or AAA cells
Input Overvoltage Operation Operation from ±1.8 V supplies down to ±0.9 V
Family Description 1.8 V micropower rail-to-rail input/output operational amplifier
Status RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

TLV2761ID 8-pin soic (d) Diamant Konfigurasi Panduan

Konfigurasi pin untuk TLV2761ID (8-pin soic (d) pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 8-pin soic (d) untuk TLV2761ID

Tidak ada data diatribut pin yang tersedia untuk TLV2761ID.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

TLV2761ID cocok untuk 6 aplikasis: Battery-Powered Sensor Signal Conditioning, Portable Instrument Front Panel, Low-Voltage Current Sensing, Portable Medical Sensor Interface, Industrial Data Acquisition, Battery Charging and Power Monitoring.

🧩

Battery-Powered Sensor Signal Conditioning

The TLV2761ID fits low-energy sensor front ends that operate from 1.8 V and require amplification close to the sensing element. Its approximately 20 µA operating current limits the burden on the power source, while rail-to-rail input operation improves usable common-mode range in compact single-supply systems. The 500 kHz gain-bandwidth product is appropriate for many temperature, pressure, and resistive sensors that do not require megahertz bandwidth. Place the amplifier close to the sensor and its feedback network to minimize susceptible trace length. The primary trade-off is that higher closed-loop noise gain reduces actual bandwidth, so the sensor's signal bandwidth and required settling time should be checked together.

📱

Portable Instrument Front Panel

The TLV2761ID can condition low-level analog inputs in handheld meters and compact measurement instruments powered from a low-voltage battery. Operation down to 1.8 V permits a compact power architecture, and the 20 µA operating current helps preserve operating time between battery replacements. Rail-to-rail output swing increases the usable measurement span when the ADC operates from the same supply. Its nominal 500 kHz bandwidth supports sensor and control paths below the amplifier's unity-gain limit, although the selected resistor values determine the actual closed-loop response. Stable references and precision resistors remain important because low-power supply and amplifier characteristics influence the complete measurement chain.

⚡

Low-Voltage Current Sensing

The TLV2761ID is suitable for amplifying the voltage generated by a small shunt resistor in a low-voltage current-measurement circuit. Its rail-to-rail input operation permits a wider input range near the supply rails, while approximately 20 µA operating current minimizes the amplifier's contribution to total system consumption. The 500 kHz gain-bandwidth product supports many moderate-bandwidth sensing paths, but the effective response depends on the selected shunt, closed-loop gain, and noise gain. Designers should check common-mode limits, input offset behavior, and shunt-induced heating under the maximum load. Keeping the Kelvin connection to the shunt short and symmetric improves measurement accuracy.

💊

Portable Medical Sensor Interface

The TLV2761ID can serve as a low-power gain stage in a portable medical sensor interface when its operating limits match the required signal chain. A 1.8 V minimum supply and approximately 20 µA current are useful for battery-operated monitoring equipment, while rail-to-rail input and output behavior supports compact analog integration. The amplifier's 500 kHz gain-bandwidth product handles many low-bandwidth physiological and biochemical sensor signals. Medical-system designers must independently validate noise, accuracy, isolation, and regulatory requirements rather than inferring them from the amplifier specification. The amplifier should be paired with a low-noise reference, suitable input filtering, and a high-resolution ADC, with protection designed for the specific sensor connection.

🏭

Industrial Data Acquisition

The TLV2761ID can amplify low-level inputs in a compact industrial data-acquisition module when the module uses a low-voltage sensor bus. Its single amplifier and 8-pin SOIC package minimize board area, while 500 kHz bandwidth accommodates many process-control and monitoring signals. The approximately 20 µA operating current is valuable when several channels share a constrained power budget. Rail-to-rail inputs help when the transducer operates near the lower supply rail, but the complete input range must remain within the amplifier's operating limits. For factory equipment, include protection against transients and verify that the selected temperature grade and system isolation requirements are satisfied. Analog grounding and digital return currents should be separated to avoid injecting noise into the measurement amplifier.

🔋

Battery Charging and Power Monitoring

The TLV2761ID can monitor a battery-derived voltage or amplify a current-sense signal in a compact power-management subsystem. Its ability to operate from 1.8 V aligns with common battery platforms, and approximately 20 µA operating current limits continual overhead. Rail-to-rail output capability improves signal utilization when the downstream ADC shares the same restricted supply. The 500 kHz gain-bandwidth product is more than adequate for many monitoring loops, but the loop must be checked for settling at the selected closed-loop gain. Because a power rail may contain abrupt transients, use suitable filtering and protection rather than relying on the amplifier's rail-to-rail behavior for overvoltage tolerance.

Ringkasan Produk Direkomendasikan

TLV2761IDBVR Rail-to-rail micropower amplifier family option Digunakan di dalam: Battery-Powered Sensor Signal Conditioning, Portable Instrument Front Panel, Low-Voltage Current Sensing, Portable Medical Sensor Interface, Industrial Data Acquisition, Battery Charging and Power Monitoring TLV9041IDBVR Low-power rail-to-rail amplifier companion Digunakan di dalam: Battery-Powered Sensor Signal Conditioning, Portable Instrument Front Panel, Low-Voltage Current Sensing, Portable Medical Sensor Interface, Industrial Data Acquisition, Battery Charging and Power Monitoring
What is the operating voltage range of the TLV2761ID?
The TLV2761ID operates from a 1.8 V minimum supply up to the 3.6 V maximum recommended supply voltage. According to the Texas Instruments TLV2761 datasheet, the amplifier is intended for single-supply operation and has also been characterized from 1.8 V, making it suitable for low-voltage battery-powered systems. Designers should not exceed the 3.6 V recommended maximum when calculating reliability, voltage tolerance, or operating margin.
What are the key specifications of TLV2761ID that engineers should know?
The TLV2761ID is a single-amplifier RRIO device with 500 kHz gain-bandwidth product, approximately 20 µA operating current, operation down to 1.8 V, and an 8-pin SOIC package. The Texas Instruments product page identifies it as a single 3.6 V, 500 kHz, rail-to-rail operational amplifier. These characteristics place it between general-purpose precision amplifiers and higher-bandwidth micropower alternatives.
Where can I download the TLV2761ID datasheet PDF?
The official TLV2761ID datasheet can be downloaded from the Texas Instruments document link at https://www.ti.com/lit/gpn/TLV2761. The manufacturer's TLV2761 product page also provides ordering information, quality documents, and device support. For an exact pin assignment and electrical-limit review, use the manufacturer datasheet rather than a distributor-generated PDF mirror.
Where can I find the TLV2761ID pinout?
The TLV2761ID pinout is found in the pin-configuration section of the Texas Instruments TLV2761 family datasheet. The exact ordering option uses an 8-pin SOIC package with pins numbered 1 through 8. Use that diagram to assign supply, ground, input, and output connections before finalizing PCB artwork or checking a replacement part for pin-to-pin compatibility.
Is TLV2761ID suitable for battery-powered sensor interfaces?
Yes, the TLV2761ID is well suited to low-voltage sensor interfaces because it operates down to 1.8 V and consumes approximately 20 µA. Its rail-to-rail input and output characteristics also increase usable signal range in low-voltage systems. The Texas Instruments datasheet notes operation from 1.8 V, which is appropriate for two-cell alkaline sources and compatible energy-harvesting front ends.
What is the bandwidth and power consumption of TLV2761ID?
The TLV2761ID provides a 500 kHz gain-bandwidth product while operating at approximately 20 µA. According to the Texas Instruments TLV2761 datasheet, this combination targets compact, low-power analog signal chains. Actual closed-loop bandwidth depends on circuit topology and noise gain, so a unity-gain design offers the highest nominal bandwidth while a higher-gain configuration reduces it.
What can replace the TLV2761ID on an existing PCB?
The closest documented replacements are TLV2761CD and TLV2761CDG4 because both use the same 8-pin SOIC format and belong to the TLV2761 family. A replacement is a true drop-in choice only after its shutdown function, supply limits, temperature grade, and exact pin assignment match the original design. Use the Texas Instruments family datasheet to confirm all of those details before changing the BOM.
Is TLV2761CD the same as TLV2761ID?
TLV2761CD is closely related to TLV2761ID and uses the same 8-pin SOIC format, but the ordering codes must still be checked for shutdown and temperature-grade differences. The documented comparison identifies consistent performance characteristics and terminals between these family variants. The TLV2761ID is the industrial -40°C to +85°C option with no shutdown function, while TLV2761CD includes shutdown.
TLV2761ID vs TLV2462CD: which is better for a low-power signal chain?
TLV2761ID is the better match when low supply voltage and micropower operation are priorities because it operates down to 1.8 V and uses approximately 20 µA. TLV2462CD may be considered only after its voltage range, current consumption, bandwidth, and pin configuration are verified against the existing circuit. The two devices are not interchangeable merely because both can perform general amplification.
When should I choose TLV2761ID instead of another micropower op amp?
Choose TLV2761ID when the design needs a single amplifier, rail-to-rail input and output operation, 500 kHz nominal bandwidth, and approximately 20 µA current consumption at voltages as low as 1.8 V. It is particularly suitable for compact battery-powered sensing. If the circuit requires shutdown, greater output current, wider bandwidth, or a different package, select an alternative that explicitly provides those capabilities.
Is TLV2761ID suitable for precision current measurement?
The TLV2761ID can amplify low-current sensor outputs because its rail-to-rail input supports a wide common-mode range and its 500 kHz gain-bandwidth product accommodates many sensor bandwidth requirements. The application still requires attention to input offset, noise, bias current, and shunt-resistor values. A high-side current measurement also needs adequate common-mode range and supply headroom around the measured voltage.
How should I decouple and lay out a TLV2761ID circuit?
Place the supply-decoupling capacitor close to the amplifier's supply and ground pins, and keep feedback components close to their corresponding pins. Route sensitive input traces away from switching converters, inductors, and high-current return paths. The Texas Instruments datasheet's recommended application circuitry provides the basis for capacitor selection and connection. A solid ground plane reduces parasitic inductance and helps maintain stable low-voltage operation.
Where can I buy TLV2761ID and check current lead time?
Use the Request a Quote form on this page to request TLV2761ID availability, current lead time, order quantity, and shipment options. The form allows the request to be matched to the exact 8-pin SOIC industrial-temperature ordering code. Current commercial status should be confirmed through that form rather than inferred from an older catalog entry or an undated listing.
What is the price of TLV2761ID?
Use the Request a Quote form on this page for the current TLV2761ID unit price and quantity breaks. The form supports confirmation of the exact MPN, package code, delivery quantity, and any authorized supply requirements. Quoted commercial terms can change with volume, market conditions, and availability, so the request form is the appropriate source for a current transaction.
Is TLV2761ID in stock and what is its lead time?
Request current TLV2761ID stock, minimum order quantity, and lead time through the Request a Quote form on this page. The exact 8-pin SOIC industrial-temperature part should be stated on the request to avoid ambiguity with related TLV2761 ordering codes. Lead time depends on supplier allocation, order quantity, and packaging requirements, so it should be confirmed for the current order.
Is the TLV2761ID RoHS compliant and qualified for automotive use?
The TLV2761ID is a general-purpose industrial-temperature amplifier rather than an AEC-Q100 automotive-qualified option, and its RoHS status should be confirmed from the current manufacturer product page or material declaration. The specified temperature range is -40°C to +85°C. Automotive designs should select an explicitly qualified ordering option and complete the required environmental and quality assessments.

Data referensi engineering untuk TLV2761ID — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the TLV2761ID when a design requires one low-power rail-to-rail amplifier operating from 1.8 V, approximately 20 µA current consumption, and industrial-temperature operation from -40°C to +85°C. It is particularly appropriate for compact battery-powered sensor interfaces, portable instruments, and low-voltage current-measurement channels. The TLV2761CD is the better choice only when the design actually requires shutdown and its 0°C to +70°C commercial temperature range covers the operating environment. The TLV2761CDG4 offers the same shutdown-equipped family behavior in the same 8-pin SOIC footprint and is also limited to the commercial temperature range. Both alternatives provide the same documented 500 kHz bandwidth, 1.8 V minimum supply, and approximately 20 µA operating current. Before changing the original part, verify the exact pinout, shutdown pin behavior, input bias state, temperature requirements, and acquisition timing in the Texas Instruments family datasheet.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini TLV2761CD TLV2761CDG4
Brand Texas Instruments Texas Instruments Texas Instruments
Package 8-pin SOIC (D) 8-pin SOIC (D) 8-pin SOIC (D)
Number of Circuits 1 circuit 1 circuit 1 circuit
Minimum Supply Voltage 1.8 V 1.8 V 1.8 V
Maximum Recommended Supply Voltage 3.6 V 3.6 V 3.6 V
Gain-Bandwidth Product 500 kHz 500 kHz 500 kHz
Operating Current 20 µA 20 µA 20 µA
Operating Temperature Range -40°C to +85°C 0°C to +70°C 0°C to +70°C
Shutdown Function No Yes Yes
Input and Output Type Rail-to-rail input/output Rail-to-rail input/output Rail-to-rail input/output

Diferensiator Kunci

  • Industrial-temperature operation without a shutdown feature (vsTLV2761CD)
  • Same low-power core in the same SOIC footprint (vsTLV2761CDG4)
  • Designed for the broadest industrial temperature range in the documented comparison (vsTLV2761CDG4)

Catatan Desain

Place the supply-decoupling capacitor directly between the TLV2761ID supply and ground pins, with the ground connection made through the shortest possible path. Keep the two feedback resistors near the amplifier rather than at the source or load. Sensitive input traces should be separated from switching-node traces, and the complete analog signal path should reference a continuous ground plane to reduce parasitic pickup and common-mode conversion.

Design the supply rail for no more than the 3.6 V maximum recommended operating voltage. If the source is a battery or low-voltage regulator, include margin for charging voltage, transient overshoot, and component tolerance. The approximately 20 µA amplifier current is favorable for portable systems, but total supply demand also includes the output-load current and external bias paths, which must be checked separately.

Account for the closed-loop bandwidth rather than assuming the full 500 kHz gain-bandwidth product is available at every gain setting. High-gain configurations use more noise gain and therefore settle more slowly. For a sampled measurement system, verify the required acquisition time and include anti-alias filtering. Rail-to-rail operation does not remove the need to keep input and output voltages inside the specified common-mode and output-swing ranges.

Do not substitute TLV2761CD for TLV2761ID solely because both use an 8-pin SOIC footprint. The CD ordering code adds shutdown and uses a narrower commercial temperature range, so it can change board behavior and fail an industrial temperature requirement. Conversely, a design requiring shutdown cannot use TLV2761ID unchanged. Verify the exact pin connection, shutdown state, and temperature grade against the Texas Instruments family datasheet before approving a replacement.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The TLV2761ID is an industrial-temperature general-purpose amplifier. Compliance declarations should be confirmed using the current manufacturer product page and applicable material declarations.

Pencarian Terkait

TLV2761ID datasheet TLV2761ID pinout TLV2761ID datasheet pdf TLV2761ID equivalent TLV2761ID replacement TLV2761ID cross reference TLV2761ID vs TLV2761CD TLV2761ID footprint TLV2761ID application circuit Texas Instruments TLV2761ID TLV2761ID price TLV2761ID stock

Komponen dan Istilah Terkait

Texas Instruments TLV2761ID TLV2761CD TLV2761CDG4 TLV2761IDBVR TLV9041IDBVR operational amplifier voltage-feedback amplifier amplifier IC micro-power amplifier rail-to-rail input rail-to-rail output RRIO gain-bandwidth product input common-mode range output swing operating current single-supply operation 8-pin SOIC SOIC package family surface-mount package SMD battery-powered electronics sensor signal conditioning low-voltage current sensing
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ