STMicroelectronics

TS972IYD - Dual 12MHz Rail-to-Rail Op Amp | STMicroelectronics

MPN: TS972IYD ✗ Akhir Hidup
2.7 V (±1.35 V) Vdss 8-pin SOIC Package
MOQ: 1 |

TS972IYD Ringkasan

The STMicroelectronics TS972IYD is a dual-circuit, general-purpose operational amplifier with rail-to-rail output swing, very low noise, and a 12 MHz gain-bandwidth product in an 8-pin SOIC package. The device supports operation from voltages as low as ±1.35 V, making it suitable for portable, battery-powered, audio, sensor, and low-voltage signal-processing equipment.

An operational amplifier, or op amp, is a voltage-gain building block within analog and mixed-signal electronics. Its feedback network can create stable gain, filtering, buffering, summing, and current-control functions. The TS972IYD belongs to the operational-amplifier hierarchy, which includes rail-to-rail amplifiers, low-noise amplifiers, and low-voltage general-purpose devices used in analog signal chains.

Key features of the TS972IYD include two amplifiers per package, rail-to-rail output operation, a 12 MHz gain-bandwidth product, and very low-noise characteristics. Rail-to-rail output allows the output stage to approach the supply limits, which helps maximize signal range in low-voltage systems. The dual configuration reduces board area by integrating two amplifier channels into one 8-pin SOIC package.

The TS97x family operates from voltages as low as ±1.35 V and is designed for portable and battery-supplied equipment. Its combination of low-noise, low-distortion behavior, wide output swing, and moderate bandwidth supports audio preamplification, sensor conditioning, active filtering, and general analog signal processing. Engineers should account for input common-mode range, output swing, capacitive-load stability, and supply-voltage limits when selecting operating points.

Typical uses include audio preamplifiers, microphone and sensor interfaces, battery-powered instrumentation, active filters, buffer stages, and low-voltage control systems. In each case, the dual channel arrangement can support paired signal paths or provide an unused amplifier for filtering, level shifting, or test functions while keeping the footprint compact.

For a new layout, route the bypass capacitor directly to the supply and ground pins, keep feedback traces short, and verify stability with the intended source impedance and load. Component substitutions require confirmation of the SOIC footprint, pin functions, supply range, common-mode behavior, output swing, bandwidth, and noise performance rather than package similarity alone.

This product page combines the device identity, package information, documented operating characteristics, sourcing workflow, and engineering guidance. It also distinguishes confirmed TS97x-family options from unsupported substitute claims and focuses replacement analysis on genuine pin-compatible, same-package possibilities rather than merely similar amplifier functions.

Alternatif penggantian untuk TS972IYD — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian TS972IYD (sama faktor bentuk dan footprint) — berbeda di dalam Package.

STMicroelectronics
Package: 8-DFN, 3 x 3 mm
Bandingkan dengan TS972IYD →

TS972IQT

✅ Drop-In
STMicroelectronics
📦 8-SOIC
General-purpose operational amplifier · 2 channels · 12 MHz · 2.7 V to 10 V · Yes · Very low noise · Low power · 8-DFN, 3 x 3 mm

Kontak untuk harga

Lihat Datasheet →

TS972IST

✅ Drop-In
📦 8-SOIC
Same TS97x family and nominal 12 MHz class, but ordering suffix and grade details require confirmation; 0% confirmed parameter difference

📋 Alternatif referensi (tidak dalam katalog)

TS972IYD Rating Maksimal & Karakteristik Listrik

Product Type Dual general-purpose operational amplifier
Number of Amplifier Channels 2 circuits
Gain-Bandwidth Product 12 MHz
Output Architecture Rail-to-rail output
Minimum Total Supply Voltage 2.7 V (±1.35 V)
Paket 8-pin SOIC
Tipe Mounting Surface mount
Automotive Series Identification I-grade identification

TS972IYD 8-pin soic Diamant Konfigurasi Panduan

Konfigurasi pin untuk TS972IYD (8-pin soic pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 8-pin soic untuk TS972IYD

Tidak ada data diatribut pin yang tersedia untuk TS972IYD.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

TS972IYD cocok untuk 6 aplikasis: Low-Voltage Audio Preamplifier, Portable Sensor Signal Conditioning, Battery-Powered Instrumentation, Active Audio Filtering, Industrial Control Signal Interface, Data Acquisition Front End.

🎧

Low-Voltage Audio Preamplifier

The TS972IYD fits dual audio preamplifier paths because the device combines two amplifiers, rail-to-rail output swing, very low noise, and a 12 MHz gain-bandwidth product in one 8-pin SOIC package. It can provide gain and buffering ahead of a codec, line input, or headphone-driver stage when operated near low supply rails. Rail-to-rail output increases usable signal range in portable systems, while the dual channel count reduces board area. Before finalizing the gain network, verify the exact input-voltage noise, distortion, common-mode range, and maximum output swing under the selected supply voltage and load.

🧩

Portable Sensor Signal Conditioning

The TS972IYD is suitable for conditioning signals from low-voltage sensors in portable or battery-powered instruments. Operation from voltages as low as ±1.35 V supports reduced-energy systems, while dual rail-to-rail channels can handle a sensor signal and a reference or auxiliary signal path. The 12 MHz bandwidth provides useful margin for moderate-bandwidth filters and instrumentation stages. The design must remain inside the amplifier's input common-mode range and output-swing limits, and it should include an anti-alias filter and decoupling capacitor placed close to the supply pins.

🔧

Battery-Powered Instrumentation

The TS972IYD's low-voltage capability and rail-to-rail output make it applicable to compact battery-powered instrumentation where signal headroom is limited. Two independent amplifiers can implement gain, buffering, active filtering, or difference functions in a shared 8-pin SOIC footprint. The very-low-noise positioning is useful when reducing the contribution of the amplifier itself to weak sensor measurements, and the 12 MHz gain-bandwidth product supports several common low-frequency and audio-band signal paths. Validate offset, bias current, supply-current consumption, and noise at the intended signal level and temperature range.

🎧

Active Audio Filtering

The TS972IYD can implement active filters because each rail-to-rail channel may be configured with external resistors and capacitors, and its 12 MHz gain-bandwidth product provides bandwidth for audio-band filter sections. Dual packaging is especially efficient for stereo filtering, differential signal conditioning, or a filter plus buffer arrangement. Component tolerances and amplifier noise set the achievable filter response, so stable resistors and suitable capacitor types should be used. Stability should also be checked with the source impedance, output loading, and any cable capacitance expected in the finished assembly.

🏭

Industrial Control Signal Interface

The dual TS972IYD can serve as an interface between low-level control signals and higher-level circuitry in industrial equipment. Its rail-to-rail output allows wider signal swing on low-voltage rails, while the two channels can amplify one command while buffering a feedback or monitor signal. The 8-pin SOIC package supports compact surface-mount layouts, and the 12 MHz bandwidth is more than adequate for many slow control loops. Engineers should confirm common-mode limits, input protection strategy, output loading, and channel-to-channel behavior before connecting external equipment or long wiring.

🖥️

Data Acquisition Front End

The TS972IYD may serve as an analog front-end amplifier in a compact data-acquisition system requiring low-voltage, low-noise signal conditioning. Two channels can process differential or related inputs, and the 12 MHz gain-bandwidth product allows useful loop gain at moderate signal frequencies. Rail-to-rail operation helps maximize dynamic range when the converter or system uses a restricted supply. The amplifier's offset and noise contribute directly to acquisition accuracy, so the selected gain, source impedance, bandwidth, settling requirements, and external anti-alias filter must be evaluated together before choosing the device.

What is the TS972IYD?
The TS972IYD is a dual general-purpose operational amplifier with rail-to-rail output, a 12 MHz gain-bandwidth product, and very low-noise characteristics in an 8-pin SOIC package. STMicroelectronics identifies it as a standard, general-purpose amplifier intended for low-voltage signal-processing systems. The search result identifies the exact orderable MPN as TS972IYD and the package as 8-SOIC.
What is the supply voltage range of TS972IYD?
The TS972IYD can operate from a total supply of 2.7 V, corresponding to ±1.35 V, according to the TS97x family description. The exact maximum supply voltage and operating limits are not reproduced in the retrieved product listing. Consult the manufacturer datasheet before applying a higher rail, and verify common-mode and output-swing limits at the intended supply voltage.
Is TS972IYD suitable for battery-powered equipment?
Yes, the TS972IYD is suitable for battery-powered equipment because its TS97x family operates from voltages as low as ±1.35 V and provides rail-to-rail output swing. These characteristics reduce the required headroom in portable systems and preserve signal range near the supply rails. The low-voltage operation must still be evaluated against the required output amplitude, input range, noise, and distortion.
What are the key specifications of TS972IYD that engineers should know?
The principal characteristics of the TS972IYD are two amplifier channels, rail-to-rail output, a 12 MHz gain-bandwidth product, very low noise, and operation from voltages as low as ±1.35 V. It is packaged as an 8-pin SOIC for surface-mount assembly. The retrieved listing classifies it as a standard general-purpose amplifier, while the manufacturer family description emphasizes low-voltage portable equipment and audio preamplifier suitability.
Where can I download the TS972IYD datasheet PDF?
The TS972IYD datasheet PDF is available through the manufacturer-linked document URL on this page and through the datasheet search result for the exact MPN. The indexed document describes the part as an output rail-to-rail, very-low-noise operational amplifier and identifies a 17-page document. Use the manufacturer document for definitive pin assignments, electrical limits, test conditions, and ordering information.
Where can I find the TS972IYD pinout?
The TS972IYD pinout should be taken from the pin-description table in the STMicroelectronics datasheet for the exact 8-pin SOIC orderable device. The listing confirms the 8-SOIC package, but it does not reproduce individual terminal names or numbering. Confirm all eight pins and the exposed thermal requirements, if any, before assigning PCB tracks or designing a replacement.
Where to buy TS972IYD online?
The TS972IYD is a legacy STMicroelectronics orderable part, and current purchasing status can be requested through the Request a Quote form on this page. The manufacturer-specific MPN and 8-SOIC package should be stated in the request to avoid ambiguity with other TS97x variants. Because the part is identified as obsolete in one indexed catalog, confirm lifecycle, traceability, and delivery status before committing a new production design.
What is the price of TS972IYD?
Current commercial terms for TS972IYD should be obtained through the Request a Quote form on this page, where quantity, condition, and traceability requirements can be specified together. No qualifying current quantity-break price is shown in the retrieved product results. Since this is an obsolete catalog part, availability may depend on remaining factory stock or authorized inventory rather than routine active-production supply.
What is the lead time for TS972IYD?
The current lead time for TS972IYD must be confirmed through the Request a Quote form on this page because the retrieved listings do not establish a fixed manufacturing schedule. For an obsolete part, lead time can vary with remaining inventory, inspection requirements, and order quantity. Include the required annual usage and traceability documentation in the request so the supply answer reflects a production plan.
Is TS972IYD in stock?
TS972IYD availability is not established by the product results because no authoritative, current stock quantity for the exact MPN is stated. Use the Request a Quote form on this page and provide the required quantity and date. Distributor listings can show historical inventory or marketplace supply without guaranteeing that the exact package, grade, and traceability level will remain available.
What can replace TS972IYD?
A TS972IYD replacement must use the same 8-SOIC footprint and match the critical supply, common-mode, output-swing, bandwidth, noise, offset, and stability characteristics. The retrieved cross-reference results do not identify a distinct same-package substitute with enough verified information to claim drop-in compatibility. A careful schematic and datasheet comparison is required before approving any alternative, particularly for low-noise audio or battery-powered designs.
TS972IYD vs TS972IQT - which is better?
TS972IYD is identified as an 8-SOIC device, while the comparison result also identifies TS972IQT within the TS97x family but does not establish that it has the same package, temperature grade, or exact ordering suffix. Choose TS972IYD when its confirmed 8-SOIC orderable configuration and documented operating range satisfy the design. Verify the full TS972IQT datasheet and footprint before treating it as a direct substitution.
TS972IYD vs TS972IST - which is better?
TS972IYD and TS972IST are both associated with the TS97x low-voltage, rail-to-rail operational-amplifier family, but the retrieved comparison does not confirm identical package or grade details. TS972IYD is confirmed in an 8-SOIC package and is the appropriate choice when that exact configuration is required. Use TS972IST only after checking its pinout, supply limits, temperature grade, and electrical performance.
When should I choose TS972IYD over another dual low-noise op amp?
Choose TS972IYD when an existing design requires the exact STMicroelectronics TS972IYD 8-SOIC footprint and benefits from its combination of low-voltage operation, rail-to-rail output, dual channels, and 12 MHz bandwidth. Retain it when minimizing schematic, layout, and validation effort outweighs the risks associated with an obsolete lifecycle status. For a new design with no legacy constraint, evaluate current active alternatives against the same noise, distortion, common-mode, and stability targets.
Is TS972IYD suitable for audio preamplifier applications?
Yes, the TS97x family description identifies very low noise and low distortion as suitable characteristics for audio preamplification, and the TS972IYD provides two channels plus rail-to-rail output. Its 12 MHz gain-bandwidth product supports audio-band applications when configured with suitable gain and termination values. Confirm the exact noise density, distortion, output swing, and stability behavior from the datasheet for the selected gain and load.
Can a cross-brand dual rail-to-rail op amp replace TS972IYD?
A cross-brand device can replace TS972IYD only after demonstrating pin-to-pin compatibility in an 8-SOIC footprint and matching the critical electrical and environmental requirements. The verified cross-reference results contain no named cross-brand component with sufficient package-level evidence, so no cross-brand drop-in alternative is asserted here. Validate output swing, input common-mode range, noise, distortion, offset, bias current, load drive, and shutdown or enable behavior before approval.

Data referensi engineering untuk TS972IYD — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the TS972IYD when maintaining an existing 8-SOIC design is more important than adopting a currently active component, particularly in a low-voltage audio, sensor, or control circuit. Its dual channels, rail-to-rail output, low-voltage capability, and 12 MHz gain-bandwidth product suit compact signal-processing designs. TS972IQT or TS972IST may be preferable when their exact orderable grade, lifecycle, and sourcing position better match a production plan, but confirm the full datasheet before substitution. For a new design without a legacy footprint constraint, evaluate active low-noise dual op amps against noise density, distortion, offset, bias current, supply current, common-mode range, output swing, and capacitive-load stability. The TS972IYD's obsolete status is the principal risk and should be handled through lifecycle confirmation, traceability requirements, and a controlled migration plan rather than assumed availability.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini TS972IQT TS972IST
Brand STMicroelectronics STMicroelectronics STMicroelectronics
Package 8-SOIC 8-SOIC 8-SOIC
Amplifier Channels 2 circuits 2 circuits 2 circuits
Product Class Standard general-purpose amplifier TS97x general-purpose amplifier TS97x general-purpose amplifier
Gain-Bandwidth Product 12 MHz 12 MHz 12 MHz
Output Architecture Rail-to-rail output Rail-to-rail output Rail-to-rail output
Minimum Total Supply Voltage 2.7 V (±1.35 V) 2.7 V (±1.35 V) 2.7 V (±1.35 V)
Noise Positioning Very low noise Very low noise Very low noise
Orderable Suffix IYD IQT IST

Diferensiator Kunci

  • Combines dual amplification with low-voltage rail-to-rail operation (vsTS972IQT)
  • Provides higher bandwidth than typical general-purpose precision amplifiers (vsTS972IST)
  • Targets low-noise audio and portable signal conditioning (vsTS972IQT)

Catatan Desain

Place the supply bypass capacitor immediately between the device supply and ground pins, with the shortest possible loop. For an 8-SOIC implementation, keep the capacitor and amplifier ground connection on the same PCB layer where practical to reduce parasitic inductance. Add separate bulk capacitance at the power-source entry point so that switching and wiring inductance do not appear directly across the amplifier pins.

Keep input, feedback, and output traces short and away from noisy switching nodes and high-current paths. Maintain a continuous ground reference beneath the device and sensitive analog traces where the board stack-up permits. Because the TS972IYD can be used with external feedback networks, component leads and ground-return paths should be arranged to minimize parasitic feedback and input capacitance.

Check output stability with the actual source impedance, load capacitance, cable length, and feedback network. An 8-pin SOIC amplifier can become conditionally unstable when driving large capacitive loads because the extra capacitance interacts with output and feedback poles. If a capacitive load is unavoidable, add an isolation resistor near the output or revise the feedback network, and verify stability with an oscilloscope and appropriate capacitive loads.

Do not treat the rail-to-rail output description as permission for unlimited input or output swing. Confirm the input common-mode range and output voltage limits at the actual supply voltage, and include output headroom for distortion and load-current variation. Similarly, operation from ±1.35 V describes a family capability but does not by itself establish that every application, temperature, and output-load condition satisfies the exact orderable device limits.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

One indexed catalog associates the I-grade family with automotive identification and AEC-Q100, but an exact TS972IYD qualification statement is not present. Treat the exact-device compliance status as unknown until confirmed from the manufacturer datasheet or product documentation.

Pencarian Terkait

TS972IYD datasheet TS972IYD specifications TS972IYD pinout TS972IYD datasheet pdf STMicroelectronics TS972IYD TS972IYD 12MHz op amp TS972IYD 8-SOIC TS972IYD equivalent TS972IYD replacement TS972IYD vs TS972IQT TS972IYD price TS972IYD stock TS972IYD audio preamplifier TS972IYD application circuit TS972IYD cross reference

Komponen dan Istilah Terkait

STMicroelectronics TS972IYD TS972IQT TS972IST TS97x family operational amplifier dual amplifier rail-to-rail output low-noise amplifier general-purpose amplifier 12 MHz gain-bandwidth product low-dropout power 8-SOIC SOIC family surface-mount package analog signal chain audio preamplifier sensor conditioning active filter data acquisition battery-powered equipment common-mode voltage output voltage swing gain-bandwidth product total harmonic distortion
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ