Nuvoton Technology Corporation

W78E054B40PL - 40MHz 8051 Flash Microcontroller | Nuvoton

MPN: W78E054B40PL ✓ Aktif
5 V Vdss 44-pin PLCC Package 40 MHz Speed 16 KB (16K x 8 bits) Memory
MOQ: 1 |

W78E054B40PL Ringkasan

Nuvoton Technology Corporation W78E054B40PL is an 8-bit W78-series 8051-compatible flash microcontroller operating at up to 40 MHz, with 16 KB of program Flash, 256 bytes of RAM, and 36 general-purpose I/O pins in a 44-pin PLCC package. It combines a CISC processor core with internal oscillator options and a 5 V supply requirement for compact embedded-control designs.

An 8051-compatible microcontroller is an embedded processing IC that executes firmware from internal Flash, accesses data through internal RAM, and controls external hardware through digital I/O. The W78 family belongs to the broader 8-bit microcontroller hierarchy, combining a small instruction set, dedicated timer and serial-control resources, and flexible embedded peripherals in a low-cost device suitable for industrial controllers, appliances, and compact automation equipment.

The W78E054B40PL provides 16 KB, or 16K x 8 bits, of Flash program memory and 256 x 8 bits of RAM. Its maximum clock frequency is 40 MHz, while its 36 available I/O lines support digital inputs, outputs, and multiplexed peripheral functions. The device is offered in a 44-pin PLCC package, a leaded surface-mount format suited to legacy industrial and control boards that use plated-chip carriers rather than modern fine-pitch packages.

The W78 architecture uses an 8-bit CISC processing model and an oscillator arrangement that allows clock selection suitable for embedded timing requirements. A 40 MHz operating rate gives designers more instruction throughput than conventional low-speed 8051 devices while retaining software compatibility with the established 8051 programming model. Its integrated Flash also eliminates the need for an external program-memory device in firmware-intensive control products.

Typical uses include small industrial controllers, temperature and appliance controls, digital timers, sensor-conditioning systems, and equipment-control panels where a dedicated 8-bit processor is sufficient. The device can also serve as a peripheral controller in larger assemblies when the host system requires deterministic digital I/O and local firmware rather than a high-performance processor with a large memory footprint.

When designing a new board around the W78E054B40PL, verify the clock source, reset behavior, port multiplexing, and programming interface against the manufacturer datasheet before assigning external functions. Because the PLCC package is no longer common in new compact products, confirm connector availability and assembly-process compatibility early in the mechanical design phase.

This page combines the W78E054B40PL electrical identity, package details, application guidance, design cautions, and substitution limitations to support faster engineering review. It also distinguishes verified device characteristics from parameters that require confirmation from the complete manufacturer documentation.

Alternatif penggantian untuk W78E054B40PL — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

W78E054B20PL

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 44-pin PLCC (44-LCC, J-lead)
Maximum clock frequency is 20 MHz versus 40 MHz, a 50% reduction; same W78E054 family and 44-pin PLCC footprint

📋 Alternatif referensi (tidak dalam katalog)

W78E054A40PL

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 44-pin PLCC (44-LCC, J-lead)
Same 40 MHz maximum clock frequency and 44-pin PLCC footprint, but the A-family revision has different memory and peripheral configuration requiring firmware review

📋 Alternatif referensi (tidak dalam katalog)

W78E054D40PL

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 44-pin PLCC (44-LCC, J-lead)
Same 40 MHz maximum clock frequency and 44-pin PLCC footprint, while the D-family revision changes selected memory and peripheral functions

📋 Alternatif referensi (tidak dalam katalog)

W78E054B40PL

✅ Drop-In
Nuvoton Technology Corporation
📦 44-pin PLCC (44-LCC, J-lead)
8-bit 8051-compatible flash microcontroller · W78 series · 8-bit CISC · 40 MHz · 16 KB (16K x 8 bits) · Flash · 256 bytes (256 x 8 bits) · 36 pins

Kontak untuk harga

Lihat Datasheet →

W78E054B40PLG

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 44-pin PLCC (44-LCC, J-lead)
Same 40 MHz device and 44-pin PLCC electrical configuration, distinguished by the documented G suffix; lead and delivery configuration must be confirmed

📋 Alternatif referensi (tidak dalam katalog)

W78E054B40PL Rating Maksimal & Karakteristik Listrik

Product Type 8-bit 8051-compatible flash microcontroller
Series W78 series
Processor Architecture 8-bit CISC
Frekuensi Bawah Maximum 40 MHz
Program Memory Size 16 KB (16K x 8 bits)
Program Memory Type Flash
RAM Size 256 bytes (256 x 8 bits)
Number of I/O Pins 36 pins
Tegangan Pemuat 5 V
Paket 44-pin PLCC
Package Type PLCC (J-lead)
Tipe Mounting Surface mount

W78E054B40PL plcc (j-lead) Diamant Konfigurasi Panduan

Konfigurasi pin untuk W78E054B40PL (plcc (j-lead) pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai plcc (j-lead) untuk W78E054B40PL

Tidak ada data diatribut pin yang tersedia untuk W78E054B40PL.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

W78E054B40PL cocok untuk 6 aplikasis: Industrial Machine Control, Appliance Control, Temperature Monitoring, Digital Timer and Sequencer, Sensor Interface Hub, Legacy Control-System Upgrade.

🏭

Industrial Machine Control

The W78E054B40PL fits compact machine-control modules that coordinate limit switches, pushbuttons, indicators, relays, and simple actuators. Its 40 MHz maximum clock gives an 8051-compatible firmware core more execution margin than a classic low-speed controller, while 36 I/O lines reduce the need for external digital expansion. The 16 KB Flash supports local sequencing, diagnostics, and parameter handling. Because the device uses a 44-pin PLCC package, it is most attractive when maintaining an established plated-chip-carrier layout is more valuable than minimizing board area.

⚡

Appliance Control

The W78E054B40PL can serve as the main controller in an appliance where firmware coordinates user inputs, displays, sensors, heaters, motors, and safety-related interlocks. The 8-bit CISC architecture is appropriate for sequential control, and the 40 MHz clock provides useful throughput for interrupt-driven routines. Internal Flash permits compact standalone firmware without an external memory device. Final design work must confirm the operating-temperature requirement, reset behavior, timer resources, and whether every required interface is assigned through the available 36 I/O pins.

💊

Temperature Monitoring

The W78E054B40PL is suitable for a compact temperature-monitoring unit that reads sensor signals through discrete I/O, evaluates thresholds, drives a local display, and records alarm events. Its 256 bytes of RAM are sufficient for small working buffers and current measurements, while 16 KB of Flash accommodates acquisition, filtering, and communication routines. A 40 MHz clock can support responsive timing without a more complex processor. The completed instrument still needs suitable analog front-end components because the microcontroller does not itself provide the temperature-sensing front end.

🖥️

Digital Timer and Sequencer

The W78E054B40PL fits timer boards, program sequencers, and event-control products that need accurate digital sequencing around a real-time clock or external timing reference. Its timer resources and 36 I/O pins can distribute timed outputs to lamps, relays, counters, or displays, while the 40 MHz operating ceiling leaves computational headroom for scheduling and debounce logic. The exact timer channels, modes, and clock sources must be checked in the manufacturer datasheet before fixing the timebase and I/O allocation for the board.

🧩

Sensor Interface Hub

The W78E054B40PL can act as a local sensor-interface hub for a system that receives discrete sensor signals, applies limits or filtering, and forwards status to another controller. Its 36 I/O pins support multiple digital inputs and outputs, and the 16 KB Flash is adequate for compact acquisition and filtering firmware. The 8-bit processor architecture keeps the control loop straightforward for slow or moderate-rate signals. For high-speed or precision analog measurement, use dedicated conversion hardware and treat the microcontroller as the supervisory digital element.

🔧

Legacy Control-System Upgrade

The W78E054B40PL is a practical candidate for maintaining or selectively upgrading an existing 8051-based control board that uses a 44-pin PLCC footprint. Its 40 MHz clock, 16 KB of internal Flash, and 36 I/O lines can modernize performance and program-memory integration without abandoning the established processor architecture. A drop-in decision must still compare reset, oscillator, programming, peripheral, and pin assignments in detail. The benefit is greatest when the existing firmware and board mechanics are already validated against the device family.

What is the W78E054B40PL?
The W78E054B40PL is an 8-bit W78-series 8051-compatible flash microcontroller rated for up to 40 MHz operation. It includes 16 KB of Flash program memory, 256 bytes of RAM, 36 I/O pins, and a 44-pin PLCC package. According to the W78E054B40PL manufacturer datasheet, the device is intended for compact embedded-control systems requiring local firmware, digital I/O, and established 8051-compatible software support.
What are the key specifications of W78E054B40PL that engineers should know?
The W78E054B40PL combines a 40 MHz maximum operating frequency with 16 KB of Flash program memory, 256 bytes of RAM, and 36 I/O pins. According to the W78E054B40PL manufacturer datasheet, it uses an 8-bit CISC architecture and a 5 V supply in a 44-pin PLCC package. These figures define its role as a compact, moderately fast 8051-compatible control device rather than a high-end embedded processor.
Where can I download the W78E054B40PL datasheet PDF?
The W78E054B40PL datasheet PDF is available through the manufacturer-datasheet link on this page and through the documented W78E054B40PL PDF index. The document identifies the device as an 8-bit microcontroller and provides the core electrical, package, memory, I/O, and functional information needed for design review. Before production release, compare the complete document revision against the exact W78E054B40PL ordering code.
Where can I find the W78E054B40PL pinout?
The W78E054B40PL pin assignment must be taken from the pin-description table and package drawing in the manufacturer datasheet because a complete 44-pin map is not reproduced on this page. The device uses a 44-pin PLCC package with J-leads, and its 36 I/O pins are combined with power, ground, clock, reset, and programming-related terminals. Assign PCB nets only after checking every pin number against the exact datasheet revision.
How much memory does the W78E054B40PL have?
The W78E054B40PL has 16 KB of Flash program memory and 256 bytes of internal RAM. According to the W78E054B40PL manufacturer datasheet, the Flash is organized as 16K x 8 bits and replaces the external program-memory requirement associated with many original 8051 systems. The 256-byte RAM is suitable for working variables and small data buffers rather than storage-intensive applications.
What is the maximum clock frequency of W78E054B40PL?
The maximum clock frequency of the W78E054B40PL is 40 MHz. According to the W78E054B40PL manufacturer datasheet, this clock rate provides substantially more execution capability than a classic low-speed 8051 while retaining the W78 family's 8-bit CISC architecture. The actual operating frequency still depends on the configured clock source, oscillator arrangement, and operating conditions documented for the design.
Is W78E054B40PL suitable for industrial control equipment?
Yes, the W78E054B40PL is suitable for compact industrial-control equipment requiring 8051-compatible firmware, digital I/O, and embedded Flash rather than a high-performance application processor. Its 40 MHz maximum clock, 36 I/O pins, and 16 KB of program memory support timers, discrete controls, communications, and sensor-interface logic. Qualification requirements, temperature limits, and EMC validation must be checked separately for the finished equipment.
What can replace the W78E054B40PL?
No confirmed pin-to-pin replacement for the W78E054B40PL is identified, so engineers should not assume that a generic 8051 device will work without redesign. A valid drop-in replacement must use the same 44-pin PLCC footprint and preserve the critical clock, reset, programming, and 36-I/O assignments while remaining electrically and software compatible. Use the Request a Quote form on this page when sourcing the exact Nuvoton device.
Is the W78E054B40PL the same as an ordinary 8051 microcontroller?
The W78E054B40PL is 8051-compatible, but it is not an interchangeable generic 8051 package. It integrates 16 KB of Flash, 36 I/O pins, and operation up to 40 MHz in a 44-pin PLCC. According to the W78E054B40PL manufacturer datasheet, design engineers should check its oscillator, reset, peripheral, and pin functions before treating another 8051-family IC as a direct replacement.
What is the best Nuvoton equivalent for W78E054B40PL?
The best confirmed sourcing equivalent is the exact W78E054B40PL because no separate cross-brand device has been established as both pin-compatible and electrically equivalent. A similarly named 8051 controller may differ in clock circuitry, memory organization, peripheral mapping, or package details. Submit the exact MPN and required quantity through the Request a Quote form on this page to discuss procurement without treating an unverified substitute as drop-in.
When should I choose W78E054B40PL over another 8-bit microcontroller?
Choose the W78E054B40PL when an existing 8051-compatible control platform needs a 40 MHz controller with 16 KB of internal Flash, 256 bytes of RAM, 36 I/O lines, and a 44-pin PLCC footprint. It is especially relevant when maintaining legacy software or board mechanics matters more than adopting a newer MCU architecture. For new compact products, compare package availability, toolchain support, peripheral requirements, and long-term sourcing before committing.
Is W78E054B40PL suitable for an appliance controller?
Yes, the W78E054B40PL fits many appliance-control tasks involving buttons, indicators, relays, sensors, timers, and local sequence logic. Its 36 I/O pins provide substantial digital connectivity, while 16 KB of Flash supports dedicated control firmware and the 40 MHz clock supplies useful execution margin. Final suitability depends on the required peripherals, operating temperature, safety isolation, and the specific functions assigned to each PLCC pin.
How do I choose between W78E054B40PL and a modern 8-bit MCU?
Choose the W78E054B40PL when preserving 8051 code compatibility, using an existing 44-pin PLCC board, or minimizing the scope of an established design change is important. Choose a modern 8-bit MCU when a smaller package, lower power, richer peripherals, newer tooling, or broader lifecycle support materially improves the product. The relevant comparison is not clock frequency alone; firmware effort, peripheral coverage, board area, and availability must also be evaluated.
Where to buy W78E054B40PL online?
Use the Request a Quote form on this page to request the W78E054B40PL with the required package, quantity, and delivery destination. The form provides a direct path for current commercial terms without embedding a price that may change. For production planning, request the current lead time and minimum order quantity in the same inquiry so schedule risk can be assessed against the required firmware build.
What is the price of W78E054B40PL?
The current commercial price for W78E054B40PL is handled through the Request a Quote form on this page. Pricing depends on order quantity, delivery destination, and current component sourcing conditions, so a static figure would not represent a reliable quotation. Include your annual usage and target delivery schedule when requesting terms to obtain a response suited to production planning.
What is the lead time for W78E054B40PL?
Request the current lead time for W78E054B40PL through the Request a Quote form on this page. Lead time can vary with order quantity, component availability, and production planning, so it should be confirmed for the exact MPN and 44-pin PLCC package. For safety-critical schedules, request a supply commitment and include the date by which inventory must arrive at your receiving facility.
Is W78E054B40PL in stock?
Use the Request a Quote form on this page to request current stock status for W78E054B40PL. Availability should be confirmed against the exact ordering code and required quantity, including whether the shipment is new stock rather than recovered or obsolete material. For a production release, ask for traceable sourcing and a committed delivery date before authorizing the build.

Data referensi engineering untuk W78E054B40PL — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the W78E054B40PL when maintaining 8051-compatible firmware, updating an existing 44-pin PLCC control board, or implementing a compact controller with 36 I/O pins and 16 KB of internal Flash. Its 40 MHz maximum clock provides useful performance margin without changing the established 8-bit software model. Choose a newer 8-bit or 32-bit MCU when package size, power consumption, modern peripherals, development tooling, or lifecycle breadth outweigh the value of software continuity. Do not substitute an ordinary 8051 merely because it uses the same core family; the footprint, oscillator, reset, programming, and peripheral assignments must be checked. For new mixed-signal or connected products, compare the W78E054B40PL with contemporary controllers before finalizing the mechanical and firmware architecture.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini
Package 44-pin PLCC
Brand Nuvoton Technology Corporation
Processor Architecture 8-bit CISC, 8051-compatible
Maximum Clock Frequency 40 MHz
Program Memory 16 KB Flash
RAM 256 bytes
I/O Pins 36 pins
Supply Voltage 5 V

Diferensiator Kunci

  • High-frequency operation within the 8051-compatible family (vsNo confirmed drop-in alternative)
  • Integrated Flash removes the external program-memory device (vsNo confirmed drop-in alternative)
  • Substantial digital connectivity in a legacy PLCC footprint (vsNo confirmed drop-in alternative)

Catatan Desain

Use the 44-pin PLCC footprint from the exact manufacturer package drawing and reserve a compatible socket when field replacement is required. PLCC is a through-insertion surface-mount format, so verify connector availability, assembly height, and rework access before layout release. Keep the controller away from large heat sources and provide copper paths for ground-connected pins according to the datasheet recommendations.

Do not treat a generic 8051 controller as an automatic substitute. A board-level replacement must match the 44-pin PLCC footprint and preserve power, ground, oscillator, reset, programming, and all 36 I/O assignments. Confirm peripheral multiplexing and startup behavior as well, because differences hidden at the processor-family level can prevent firmware from operating correctly even when the package dimensions match.

Design the 5 V supply and local decoupling around the voltage and current limits in the manufacturer datasheet. Place the required input and output capacitors close to their associated pins, provide a clean return path, and account for startup current when the reset and clock network is released. Include a controlled power-up sequence if any connected peripheral can back-feed or disturb the controller during initialization.

Route the oscillator and reset nets away from high-current switching nodes and noisy digital perimeter signals. Keep programming or debug access unobstructed, maintain consistent grounding between analog sensor wiring and the digital controller, and use test points for supply, reset, clock, and key I/O signals. These steps improve diagnosis of boot failures in systems where the controller operates beside relays, motor drivers, or mains-connected equipment.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The manufacturer datasheet index should be checked for the exact package, terminal finish, environmental ratings, and declaration status. No RoHS, REACH, halogen-free, or conflict-minerals declaration was identified for this ordering code.

Data disahkan pada: 2026-11-11 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

W78E054B40PL datasheet W78E054B40PL pinout W78E054B40PL datasheet pdf W78E054B40PL specifications W78E054B40PL equivalent W78E054B40PL replacement W78E054B40PL cross reference W78E054B40PL footprint W78E054B40PL 44 pin PLCC W78E054B40PL price W78E054B40PL stock Nuvoton W78E054B40PL W78E054B40PL 40MHz flash microcontroller W78E054B40PL industrial controller

Komponen dan Istilah Terkait

Nuvoton Technology Corporation Winbond Electronics W78E054B40PL W78 series 8-bit microcontroller 8051-compatible microcontroller CISC architecture embedded controller semiconductor Flash program memory RAM 40 MHz clock 36 I/O pins 44-pin PLCC J-lead package surface mount industrial control appliance control sensor interface digital timer embedded system microcontroller timer system clock reset circuit 5 V supply
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ