W78E054B40PL - 40MHz 8051 Flash Microcontroller | Nuvoton
MPN: W78E054B40PL ✓ Hoạt độngW78E054B40PL Tóm tắt
An 8051-compatible microcontroller is an embedded processing IC that executes firmware from internal Flash, accesses data through internal RAM, and controls external hardware through digital I/O. The W78 family belongs to the broader 8-bit microcontroller hierarchy, combining a small instruction set, dedicated timer and serial-control resources, and flexible embedded peripherals in a low-cost device suitable for industrial controllers, appliances, and compact automation equipment.
The W78E054B40PL provides 16 KB, or 16K x 8 bits, of Flash program memory and 256 x 8 bits of RAM. Its maximum clock frequency is 40 MHz, while its 36 available I/O lines support digital inputs, outputs, and multiplexed peripheral functions. The device is offered in a 44-pin PLCC package, a leaded surface-mount format suited to legacy industrial and control boards that use plated-chip carriers rather than modern fine-pitch packages.
The W78 architecture uses an 8-bit CISC processing model and an oscillator arrangement that allows clock selection suitable for embedded timing requirements. A 40 MHz operating rate gives designers more instruction throughput than conventional low-speed 8051 devices while retaining software compatibility with the established 8051 programming model. Its integrated Flash also eliminates the need for an external program-memory device in firmware-intensive control products.
Typical uses include small industrial controllers, temperature and appliance controls, digital timers, sensor-conditioning systems, and equipment-control panels where a dedicated 8-bit processor is sufficient. The device can also serve as a peripheral controller in larger assemblies when the host system requires deterministic digital I/O and local firmware rather than a high-performance processor with a large memory footprint.
When designing a new board around the W78E054B40PL, verify the clock source, reset behavior, port multiplexing, and programming interface against the manufacturer datasheet before assigning external functions. Because the PLCC package is no longer common in new compact products, confirm connector availability and assembly-process compatibility early in the mechanical design phase.
This page combines the W78E054B40PL electrical identity, package details, application guidance, design cautions, and substitution limitations to support faster engineering review. It also distinguishes verified device characteristics from parameters that require confirmation from the complete manufacturer documentation.
Bộ thay thế dễ dàng lắp đặt cho W78E054B40PL — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
W78E054B20PL
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
W78E054A40PL
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
W78E054D40PL
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
W78E054B40PL
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →W78E054B40PLG
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
W78E054B40PL Tỷ lệ tối đa & tính chất điện
| Product Type | 8-bit 8051-compatible flash microcontroller |
| Series | W78 series |
| Processor Architecture | 8-bit CISC |
| Tần số xung maksimum | 40 MHz |
| Program Memory Size | 16 KB (16K x 8 bits) |
| Program Memory Type | Flash |
| RAM Size | 256 bytes (256 x 8 bits) |
| Number of I/O Pins | 36 pins |
| Điện áp cung cấp | 5 V |
| Hộp | 44-pin PLCC |
| Package Type | PLCC (J-lead) |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân W78E054B40PL plcc (j-lead)
Cấu hình chân cho W78E054B40PL (plcc (j-lead) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho W78E054B40PL.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
W78E054B40PL phù hợp cho 6 Áp dụngs: Industrial Machine Control, Appliance Control, Temperature Monitoring, Digital Timer and Sequencer, Sensor Interface Hub, Legacy Control-System Upgrade.
Industrial Machine Control
The W78E054B40PL fits compact machine-control modules that coordinate limit switches, pushbuttons, indicators, relays, and simple actuators. Its 40 MHz maximum clock gives an 8051-compatible firmware core more execution margin than a classic low-speed controller, while 36 I/O lines reduce the need for external digital expansion. The 16 KB Flash supports local sequencing, diagnostics, and parameter handling. Because the device uses a 44-pin PLCC package, it is most attractive when maintaining an established plated-chip-carrier layout is more valuable than minimizing board area.
Được đề xuất
Appliance Control
The W78E054B40PL can serve as the main controller in an appliance where firmware coordinates user inputs, displays, sensors, heaters, motors, and safety-related interlocks. The 8-bit CISC architecture is appropriate for sequential control, and the 40 MHz clock provides useful throughput for interrupt-driven routines. Internal Flash permits compact standalone firmware without an external memory device. Final design work must confirm the operating-temperature requirement, reset behavior, timer resources, and whether every required interface is assigned through the available 36 I/O pins.
Được đề xuất
Temperature Monitoring
The W78E054B40PL is suitable for a compact temperature-monitoring unit that reads sensor signals through discrete I/O, evaluates thresholds, drives a local display, and records alarm events. Its 256 bytes of RAM are sufficient for small working buffers and current measurements, while 16 KB of Flash accommodates acquisition, filtering, and communication routines. A 40 MHz clock can support responsive timing without a more complex processor. The completed instrument still needs suitable analog front-end components because the microcontroller does not itself provide the temperature-sensing front end.
Được đề xuất
Digital Timer and Sequencer
The W78E054B40PL fits timer boards, program sequencers, and event-control products that need accurate digital sequencing around a real-time clock or external timing reference. Its timer resources and 36 I/O pins can distribute timed outputs to lamps, relays, counters, or displays, while the 40 MHz operating ceiling leaves computational headroom for scheduling and debounce logic. The exact timer channels, modes, and clock sources must be checked in the manufacturer datasheet before fixing the timebase and I/O allocation for the board.
Được đề xuất
Sensor Interface Hub
The W78E054B40PL can act as a local sensor-interface hub for a system that receives discrete sensor signals, applies limits or filtering, and forwards status to another controller. Its 36 I/O pins support multiple digital inputs and outputs, and the 16 KB Flash is adequate for compact acquisition and filtering firmware. The 8-bit processor architecture keeps the control loop straightforward for slow or moderate-rate signals. For high-speed or precision analog measurement, use dedicated conversion hardware and treat the microcontroller as the supervisory digital element.
Được đề xuất
Legacy Control-System Upgrade
The W78E054B40PL is a practical candidate for maintaining or selectively upgrading an existing 8051-based control board that uses a 44-pin PLCC footprint. Its 40 MHz clock, 16 KB of internal Flash, and 36 I/O lines can modernize performance and program-memory integration without abandoning the established processor architecture. A drop-in decision must still compare reset, oscillator, programming, peripheral, and pin assignments in detail. The benefit is greatest when the existing firmware and board mechanics are already validated against the device family.
Được đề xuất
Dữ liệu tham khảo kỹ thuật cho W78E054B40PL — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Package | 44-pin PLCC |
| Brand | Nuvoton Technology Corporation |
| Processor Architecture | 8-bit CISC, 8051-compatible |
| Maximum Clock Frequency | 40 MHz |
| Program Memory | 16 KB Flash |
| RAM | 256 bytes |
| I/O Pins | 36 pins |
| Supply Voltage | 5 V |
Bảo phân biệt quan trọng
- High-frequency operation within the 8051-compatible family (vsNo confirmed drop-in alternative)
- Integrated Flash removes the external program-memory device (vsNo confirmed drop-in alternative)
- Substantial digital connectivity in a legacy PLCC footprint (vsNo confirmed drop-in alternative)
Ghi chú thiết kế
Use the 44-pin PLCC footprint from the exact manufacturer package drawing and reserve a compatible socket when field replacement is required. PLCC is a through-insertion surface-mount format, so verify connector availability, assembly height, and rework access before layout release. Keep the controller away from large heat sources and provide copper paths for ground-connected pins according to the datasheet recommendations.
Do not treat a generic 8051 controller as an automatic substitute. A board-level replacement must match the 44-pin PLCC footprint and preserve power, ground, oscillator, reset, programming, and all 36 I/O assignments. Confirm peripheral multiplexing and startup behavior as well, because differences hidden at the processor-family level can prevent firmware from operating correctly even when the package dimensions match.
Design the 5 V supply and local decoupling around the voltage and current limits in the manufacturer datasheet. Place the required input and output capacitors close to their associated pins, provide a clean return path, and account for startup current when the reset and clock network is released. Include a controlled power-up sequence if any connected peripheral can back-feed or disturb the controller during initialization.
Route the oscillator and reset nets away from high-current switching nodes and noisy digital perimeter signals. Keep programming or debug access unobstructed, maintain consistent grounding between analog sensor wiring and the digital controller, and use test points for supply, reset, clock, and key I/O signals. These steps improve diagnosis of boot failures in systems where the controller operates beside relays, motor drivers, or mains-connected equipment.
Thông tin tuân thủ
The manufacturer datasheet index should be checked for the exact package, terminal finish, environmental ratings, and declaration status. No RoHS, REACH, halogen-free, or conflict-minerals declaration was identified for this ordering code.