WM8253SCDS/RV - 16-Bit 6MSPS Single-Channel AFE | Cirrus Logic
MPN: WM8253SCDS/RV ✓ AktifWM8253SCDS/RV Ringkasan
An analog front end, or AFE, is the interface between an imaging sensor and the digital processing system. Its sensor-side input circuitry conditions the charge or voltage generated by a CMOS image sensor or CCD, while its internal ADC converts the conditioned analog signal into digital data. Within the image-signal chain, the AFE sits between the optical sensor and the ISP, FPGA, image processor, or system controller. The WM8253SCDS/RV combines this analog conditioning function with a single-channel 16-bit conversion stage.
The principal device characteristics include one analog input channel, 16-bit conversion resolution, a maximum sampling rate of 6 MSPS, 3.3 V operation, and 132 mW power. Its 4-bit wide output provides a compact connection to downstream digital circuitry. The 20-SSOP package is suitable for surface-mount assembly in imaging modules where component density, converter resolution, and sampling speed are important design considerations.
This AFE is intended for compact imaging systems in which a sensor signal must be converted into high-resolution digital data. A 16-bit conversion stage can preserve a large number of gray levels, while operation at 6 MSPS supports line-based sensor readout and other sequential imaging workflows. The 3.3 V supply requirement simplifies integration with contemporary low-voltage digital processors, provided that the complete signal chain meets the interface voltage requirements of the selected sensor and processor.
Typical applications include document scanners, flatbed scanners, inspection equipment, machine-vision modules, barcode and imaging systems, and other CIS or CCD camera electronics. The same conversion architecture can support a custom sensor interface when its timing, input level, channel requirements, and digital output protocol are compatible with the WM8253SCDS/RV.
For new designs, confirm the sensor output waveform, required sampling rate, channel count, clocking scheme, voltage rails, and output interface against the manufacturer datasheet before assigning the PCB footprint. Because the WM8253SCDS/RV is a single-channel device, a multi-channel imaging system may require multiple AFEs or a different converter architecture.
This product page combines the documented WM8253SCDS/RV specifications with package, sourcing, replacement, and application guidance. It also identifies the only verified direct replacement candidate so that engineers can distinguish true pin-compatible interchange from unrelated sensor-interface ICs.
Alternatif penggantian untuk WM8253SCDS/RV — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian WM8253SCDS/RV (sama faktor bentuk dan footprint).
WM8253SCDS/V
✅ Drop-InKontak untuk harga
Lihat Datasheet →WM8253SCDS/RV Rating Maksimal & Karakteristik Listrik
| Number of Channels | 1 channel |
| ADC Resolution | 16 bit |
| Maximum Sampling Rate | 6 MSPS |
| Tegangan Pemuat | 3.3 V |
| Power Consumption | 132 mW |
| Output Interface Width | 4 bit wide |
| Sensor Compatibility | CIS and CCD image sensors |
| Device Type | Single-channel analog front end with ADC |
| Paket | 20-pin SSOP |
| Package Width | 5.30 mm |
| Tipe Mounting | Surface mount |
| Delivery Form | Tape and reel |
WM8253SCDS/RV 5.30 mm Diamant Konfigurasi Panduan
Konfigurasi pin untuk WM8253SCDS/RV (5.30 mm pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.
Tidak ada data diatribut pin yang tersedia untuk WM8253SCDS/RV.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
WM8253SCDS/RV cocok untuk 6 aplikasis: Flatbed Document Scanners, Machine-Vision Inspection Systems, CCD Camera Electronics, Barcode and Surface-Scan Imaging, Optical Measurement Instruments, Compact Embedded Imaging Modules.
Flatbed Document Scanners
The WM8253SCDS/RV fits a single-line CIS scanning front end where the sensor produces one analog output that must be digitized accurately and rapidly. Its 16-bit conversion resolution and 6 MSPS maximum rate support line-based image acquisition, while the 3.3 V supply simplifies integration with a scanner controller operating on the same voltage rail. The 20-SSOP package preserves board area in compact scanner electronics. The primary design consideration is sensor timing: the external clock, reset interval, and analog acquisition window must be coordinated so that the AFE samples each pixel line without violating the sensor and converter timing limits.
Direkomendasikan
Machine-Vision Inspection Systems
The WM8253SCDS/RV is suitable for a compact inspection camera or line-scan module that converts a CIS or CCD signal into 16-bit digital data for image processing. A 6 MSPS sampling capability provides headroom for rapid line acquisition, and the single-channel format maps directly to a one-output sensor without unnecessary conversion channels. Because inspection systems often depend on repeatable gray-level discrimination, the design should use a clean sensor supply, controlled reference conditions, and layout that keeps sensitive analog traces short. The downstream processor must accept the device's documented 4-bit wide output interface.
Direkomendasikan
CCD Camera Electronics
The WM8253SCDS/RV can serve as the conversion stage in a CCD-based imaging channel that requires a 16-bit AFE with operation at up to 6 MSPS. It is particularly relevant when the sensor has one analog output and the system needs more resolution than a compact 8-bit interface can provide. The 3.3 V operating supply aligns with many CCD clock and controller circuits, reducing the number of supply rails in the camera electronics. Integration requires checking the CCD output amplitude, reset pulse timing, clock polarity, and whether the sensor's output bandwidth matches the AFE acquisition characteristics.
Direkomendasikan
Barcode and Surface-Scan Imaging
The WM8253SCDS/RV can be used in a dedicated barcode or surface-scan module that needs consistent 16-bit digitization from a CIS or CCD sensor. The 6 MSPS maximum rate supports rapid line movement and short exposure workflows, while the single-channel architecture keeps the signal path compact. High-speed barcode imaging benefits from stable pixel timing, controlled sensor reset, and low-noise routing between the sensor and the AFE. Use the manufacturer timing diagrams to establish the relationship among master clock, sample clock, reset, and data output before integrating the converter with the scan controller.
Direkomendasikan
Optical Measurement Instruments
The WM8253SCDS/RV is appropriate for optical measurement instruments that use a CCD or CIS to convert spatial intensity into a high-resolution electrical measurement. Its 16-bit conversion format can represent small intensity variations, and the 6 MSPS capability allows time-sensitive scanning or positioning systems to acquire data rapidly. Measurement accuracy still depends on sensor calibration, illumination stability, analog grounding, and deterministic clocking rather than converter resolution alone. The design should preserve a low-noise path from the sensor output to the AFE and include the required bypass and reference-decoupling components in the manufacturer-recommended configuration.
Direkomendasikan
Compact Embedded Imaging Modules
The WM8253SCDS/RV supports embedded imaging modules where one CIS or CCD output is connected to an FPGA, image processor, or other digital controller. Its 3.3 V supply, 16-bit conversion resolution, and 20-SSOP surface-mount package balance functionality against board-space constraints. The 4-bit wide output provides a defined digital handoff to the processing section, but the complete interface timing and logic levels must be verified before schematic capture. Placement should prioritize short analog traces, a stable supply reference, and separation between sensitive sensor inputs and digital output routing.
Direkomendasikan
Data referensi engineering untuk WM8253SCDS/RV — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | WM8253SCDS/V |
|---|---|---|
| Package | 20-SSOP | 20-SSOP |
| Brand | Cirrus Logic | Cirrus Logic |
| Number of Channels | 1 channel | 1 channel |
| ADC Resolution | 16 bit | 16 bit |
| Maximum Sampling Rate | 6 MSPS | 6 MSPS |
| Supply Voltage | 3.3 V | 3.3 V |
| Output Interface Width | 4 bit wide | 4 bit wide |
| Delivery Format | Tape and reel | Bag |
| Sensor Type | CIS and CCD | CIS and CCD |
Diferensiator Kunci
- Purpose-built image-sensor interface (vsWM8253SCDS/V)
- Reel-ready ordering option (vsWM8253SCDS/V)
- Compact imaging conversion (vsWM8253SCDS/V)
Catatan Desain
Place the AFE close to the sensor connection and keep the analog input route short and symmetric. Follow the manufacturer layout recommendations for the input, reference, supply, and ground connections, and provide local bypassing at the device pins. Sensitive sensor lines should avoid switching-current paths and digital output routing. Because this is a high-resolution imaging AFE, trace geometry, return paths, and grounding can affect repeatability even when nominal conversion resolution is 16 bit.
Design the 3.3 V rail to support the device's documented 132 mW operating power without excessive ripple or transients. Confirm the actual supply-current behavior and permitted operating limits from the manufacturer datasheet for the selected clock rate and sensor mode. Use short supply and ground connections, local ceramic bypass capacitors, and an appropriately filtered source for the analog section. Avoid routing the sensor's switching clock currents through the AFE supply return path.
Do not treat a general-purpose ADC with the same resolution as an automatic replacement. Confirm input range, acquisition timing, clock polarity, reset behavior, reference arrangement, output protocol, and logic levels. For the verified WM8253SCDS/V substitute, also distinguish bag packaging from the tape-and-reel WM8253SCDS/RV ordering code. Verify the received device's marking, packing method, and lot documentation before approving the substitution.
Establish the sensor, AFE, and digital-controller timing budget before layout release. Account for clock distribution skew, sampling point, data-output setup and hold requirements, and the sensor's reset or blanking interval. The 6 MSPS rating describes the converter's maximum sampling capability; it does not by itself guarantee image quality if external clocks, traces, or sensor drive signals are poorly controlled.
Informasi Konformitas
The available product information does not provide component-level RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Request the applicable manufacturer compliance documentation and lot-specific certificate of conformance before production release.