Cirrus Logic Inc.

WM8253SCDS/RV - 16-Bit 6MSPS Single-Channel AFE | Cirrus Logic

MPN: WM8253SCDS/RV ✓ فعال
3.3 V Vdss 20-pin SSOP Package
MOQ: 1 |

WM8253SCDS/RV جائزہ

Cirrus Logic WM8253SCDS/RV is a single-channel, 16-bit analog front end for CIS and CCD image sensors, operating at up to 6 MSPS with a 3.3 V supply and 132 mW power consumption. The device is packaged in a 20-pin SSOP with a 4-bit wide output interface and is supplied in tape-and-reel packaging.

An analog front end, or AFE, is the interface between an imaging sensor and the digital processing system. Its sensor-side input circuitry conditions the charge or voltage generated by a CMOS image sensor or CCD, while its internal ADC converts the conditioned analog signal into digital data. Within the image-signal chain, the AFE sits between the optical sensor and the ISP, FPGA, image processor, or system controller. The WM8253SCDS/RV combines this analog conditioning function with a single-channel 16-bit conversion stage.

The principal device characteristics include one analog input channel, 16-bit conversion resolution, a maximum sampling rate of 6 MSPS, 3.3 V operation, and 132 mW power. Its 4-bit wide output provides a compact connection to downstream digital circuitry. The 20-SSOP package is suitable for surface-mount assembly in imaging modules where component density, converter resolution, and sampling speed are important design considerations.

This AFE is intended for compact imaging systems in which a sensor signal must be converted into high-resolution digital data. A 16-bit conversion stage can preserve a large number of gray levels, while operation at 6 MSPS supports line-based sensor readout and other sequential imaging workflows. The 3.3 V supply requirement simplifies integration with contemporary low-voltage digital processors, provided that the complete signal chain meets the interface voltage requirements of the selected sensor and processor.

Typical applications include document scanners, flatbed scanners, inspection equipment, machine-vision modules, barcode and imaging systems, and other CIS or CCD camera electronics. The same conversion architecture can support a custom sensor interface when its timing, input level, channel requirements, and digital output protocol are compatible with the WM8253SCDS/RV.

For new designs, confirm the sensor output waveform, required sampling rate, channel count, clocking scheme, voltage rails, and output interface against the manufacturer datasheet before assigning the PCB footprint. Because the WM8253SCDS/RV is a single-channel device, a multi-channel imaging system may require multiple AFEs or a different converter architecture.

This product page combines the documented WM8253SCDS/RV specifications with package, sourcing, replacement, and application guidance. It also identifies the only verified direct replacement candidate so that engineers can distinguish true pin-compatible interchange from unrelated sensor-interface ICs.

کے لیے ڈراپ اِن متبادل WM8253SCDS/RV — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں WM8253SCDS/RV (یکساں فارم فیکٹر اور فٹ پرنٹ).

Cirrus Logic Inc.

WM8253SCDS/V

✅ ڈراپ-اِن
Cirrus Logic Inc.
📦 20-SSOP
Single-channel CIS/CCD analog front end · 16 bit · 1 channel · 6 MSPS · 3.3 V · 132 mW · 4 bit · CIS and CCD

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

WM8253SCDS/RV زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Number of Channels 1 channel
ADC Resolution 16 bit
Maximum Sampling Rate 6 MSPS
سپلائی وولٹیج 3.3 V
Power Consumption 132 mW
Output Interface Width 4 bit wide
Sensor Compatibility CIS and CCD image sensors
Device Type Single-channel analog front end with ADC
پیکیج 20-pin SSOP
Package Width 5.30 mm
ماؤنٹنگ ٹائپ Surface mount
Delivery Form Tape and reel

WM8253SCDS/RV 5.30 mm پن کنفیگریشن گائیڈ

WM8253SCDS/RV (5.30 mm پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

WM8253SCDS/RV کے لیے 5.30 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں WM8253SCDS/RV.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

WM8253SCDS/RV کے لیے موزوں ہے 6 ایپلیکیشنs: Flatbed Document Scanners, Machine-Vision Inspection Systems, CCD Camera Electronics, Barcode and Surface-Scan Imaging, Optical Measurement Instruments, Compact Embedded Imaging Modules.

📺

Flatbed Document Scanners

The WM8253SCDS/RV fits a single-line CIS scanning front end where the sensor produces one analog output that must be digitized accurately and rapidly. Its 16-bit conversion resolution and 6 MSPS maximum rate support line-based image acquisition, while the 3.3 V supply simplifies integration with a scanner controller operating on the same voltage rail. The 20-SSOP package preserves board area in compact scanner electronics. The primary design consideration is sensor timing: the external clock, reset interval, and analog acquisition window must be coordinated so that the AFE samples each pixel line without violating the sensor and converter timing limits.

🏭

Machine-Vision Inspection Systems

The WM8253SCDS/RV is suitable for a compact inspection camera or line-scan module that converts a CIS or CCD signal into 16-bit digital data for image processing. A 6 MSPS sampling capability provides headroom for rapid line acquisition, and the single-channel format maps directly to a one-output sensor without unnecessary conversion channels. Because inspection systems often depend on repeatable gray-level discrimination, the design should use a clean sensor supply, controlled reference conditions, and layout that keeps sensitive analog traces short. The downstream processor must accept the device's documented 4-bit wide output interface.

🎥

CCD Camera Electronics

The WM8253SCDS/RV can serve as the conversion stage in a CCD-based imaging channel that requires a 16-bit AFE with operation at up to 6 MSPS. It is particularly relevant when the sensor has one analog output and the system needs more resolution than a compact 8-bit interface can provide. The 3.3 V operating supply aligns with many CCD clock and controller circuits, reducing the number of supply rails in the camera electronics. Integration requires checking the CCD output amplitude, reset pulse timing, clock polarity, and whether the sensor's output bandwidth matches the AFE acquisition characteristics.

🔧

Barcode and Surface-Scan Imaging

The WM8253SCDS/RV can be used in a dedicated barcode or surface-scan module that needs consistent 16-bit digitization from a CIS or CCD sensor. The 6 MSPS maximum rate supports rapid line movement and short exposure workflows, while the single-channel architecture keeps the signal path compact. High-speed barcode imaging benefits from stable pixel timing, controlled sensor reset, and low-noise routing between the sensor and the AFE. Use the manufacturer timing diagrams to establish the relationship among master clock, sample clock, reset, and data output before integrating the converter with the scan controller.

🖥️

Optical Measurement Instruments

The WM8253SCDS/RV is appropriate for optical measurement instruments that use a CCD or CIS to convert spatial intensity into a high-resolution electrical measurement. Its 16-bit conversion format can represent small intensity variations, and the 6 MSPS capability allows time-sensitive scanning or positioning systems to acquire data rapidly. Measurement accuracy still depends on sensor calibration, illumination stability, analog grounding, and deterministic clocking rather than converter resolution alone. The design should preserve a low-noise path from the sensor output to the AFE and include the required bypass and reference-decoupling components in the manufacturer-recommended configuration.

🧩

Compact Embedded Imaging Modules

The WM8253SCDS/RV supports embedded imaging modules where one CIS or CCD output is connected to an FPGA, image processor, or other digital controller. Its 3.3 V supply, 16-bit conversion resolution, and 20-SSOP surface-mount package balance functionality against board-space constraints. The 4-bit wide output provides a defined digital handoff to the processing section, but the complete interface timing and logic levels must be verified before schematic capture. Placement should prioritize short analog traces, a stable supply reference, and separation between sensitive sensor inputs and digital output routing.

What is the WM8253SCDS/RV?
The WM8253SCDS/RV is a single-channel, 16-bit analog front end for CIS and CCD image sensors, with a maximum conversion rate of 6 MSPS, 3.3 V operation, and a 20-pin SSOP package. According to the manufacturer datasheet, it combines sensor-signal conditioning and analog-to-digital conversion while providing a 4-bit wide digital output. It is intended for image-sensing systems requiring higher resolution than a conventional low-resolution imaging front end.
What are the key specifications of WM8253SCDS/RV that engineers should know?
The WM8253SCDS/RV combines one analog input channel, 16-bit ADC resolution, a 6 MSPS maximum sampling rate, 3.3 V operation, and 132 mW power consumption in a 20-pin SSOP package. The manufacturer datasheet identifies the device as a CIS/CCD analog front end with a 4-bit wide output. These parameters make it most relevant to imaging modules where resolution, sampling speed, compact packaging, and direct sensor interfacing are primary design requirements.
What sensor types are compatible with the WM8253SCDS/RV?
The WM8253SCDS/RV is designed for single-channel CIS and CCD image-sensor signal chains. The manufacturer datasheet describes it as a single-channel 16-bit CIS/CCD analog front end with a 4-bit wide output. Compatibility still depends on matching the sensor's output amplitude, timing, clock requirements, channel arrangement, and reset characteristics, so those details should be checked against the sensor interface specification before layout approval.
Where can I download the WM8253SCDS/RV datasheet PDF?
The WM8253SCDS/RV datasheet can be reached through the manufacturer's datasheet entry and through the linked PDF document page. The manufacturer document covers the analog front end, ADC, digital output, operating information, and pin-level application details. Use the pin-description table and electrical-characteristics sections when assigning supply rails, clocking, sensor connections, and PCB tracks, and confirm that the document you use exactly covers the WM8253SCDS/RV ordering code.
Where can I find the WM8253SCDS/RV pinout?
The WM8253SCDS/RV pinout is located in the pin-description section of the manufacturer datasheet. The device uses a 20-pin SSOP package, so the footprint has 20 numbered terminals rather than a fine-pitch leadless package. Assign the PCB footprint by matching terminal numbering and physical body width to the 20-SSOP drawing; do not infer connections from the functional block diagram alone.
What is the best drop-in replacement for WM8253SCDS/RV?
The WM8253SCDS/V is the verified drop-in replacement for the WM8253SCDS/RV because it uses the same 20-SSOP package and has the same 16-bit, single-channel, 3.3 V, 6 MSPS functional ratings. The main ordering difference is the delivery format: WM8253SCDS/RV is supplied in tape-and-reel form, while WM8253SCDS/V is listed in bag form. Confirm the shipping quantity required by your assembly process before substitution.
Can WM8253SCDS/V replace WM8253SCDS/RV on the same PCB?
Yes, the WM8253SCDS/V can replace the WM8253SCDS/RV on the same 20-SSOP footprint because the cross-reference information identifies consistent terminals, package, and principal performance characteristics. The ordering codes differ in packing format, with the RV version associated with tape-and-reel delivery and the V version associated with bag delivery. Confirm production quantities, moisture-handling requirements, and any lifecycle constraints before releasing the substitution.
What can replace WM8253SCDS/RV?
The WM8253SCDS/V is the direct replacement identified for the WM8253SCDS/RV, with the same 20-SSOP package and equivalent 1-channel, 16-bit, 3.3 V, 6 MSPS characteristics. No other independently verified, pin-compatible replacement was identified. An engineer should therefore avoid selecting a merely functionally similar ADC unless its sensor input, clocking, timing, voltage, and digital interface have been fully checked against the original circuit.
Is WM8253SCDS/RV suitable for a 6 MSPS imaging system?
Yes, the WM8253SCDS/RV is rated for operation at up to 6 MSPS and is intended for CIS or CCD imaging systems. Its 16-bit conversion resolution can support high-precision image capture, while the single-channel architecture suits sensors with one analog output. The complete design must also provide suitable sensor timing, compliant clocking, adequate analog layout, and an output interface that the downstream image processor can accept.
When should I choose WM8253SCDS/RV over a general-purpose ADC?
Choose the WM8253SCDS/RV when the source is a CIS or CCD image sensor and the design benefits from an integrated, purpose-built analog front end. Its documented 16-bit resolution, single-channel operation, 6 MSPS rate, and 4-bit wide output simplify sensor-interface design compared with a general-purpose ADC that lacks dedicated image-sensor functions. Use a general-purpose ADC only when its input range, sampling architecture, timing, and system cost are more appropriate.
Where to buy WM8253SCDS/RV online?
Use the Request a Quote form on this page to request WM8253SCDS/RV availability, commercial terms, and the quantity needed for your build. The form is the appropriate route for current sourcing because distributor inventory and lead times can change. Specify the exact MPN, quantity, delivery format, and required ship-to location to obtain a current quotation.
What is the price of WM8253SCDS/RV?
The current commercial price is not stated as a fixed figure on this page, and market pricing can vary with quantity, availability, and delivery requirements. Use the Request a Quote form on this page with the exact MPN and required quantity for a current quotation. For production planning, provide annual usage, target package format, and inspection or traceability requirements so the quotation can reflect the appropriate supply condition.
What is the lead time for WM8253SCDS/RV?
The current lead time depends on stock, manufacturing availability, order quantity, and the requested delivery schedule. Request a confirmed lead time through the Request a Quote form on this page, and include your required delivery date and quantity. For a new production program, request samples and the full order schedule before committing the PCB assembly BOM.
Is WM8253SCDS/RV in stock?
Current stock should be confirmed through the Request a Quote form on this page because inventory can move after a page is generated. Include the exact MPN, required quantity, and target delivery date in the request. If immediate material is required, ask for the available date and lot information so the purchasing team can assess whether the quantity can support the planned build.
What are the compliance qualifications of WM8253SCDS/RV?
The RoHS, REACH, halogen-free, and automotive-qualification status of the WM8253SCDS/RV requires confirmation from the manufacturer's current product documentation or a certificate of conformance for the delivered lot. The available catalog entry identifies the device as a Cirrus Logic 20-SSOP imaging analog front end but does not provide enough qualification detail to make those claims. Obtain the applicable compliance documents before using the part in a regulated production design.

کے لیے انجینئرنگ ریفرنس ڈیٹا WM8253SCDS/RV — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the WM8253SCDS/RV for a single-output CIS or CCD imaging design that requires 16-bit conversion, operation up to 6 MSPS, a 3.3 V supply, and a compact 20-SSOP footprint. Choose the WM8253SCDS/V when its identical electrical and pin configuration is preferred for prototypes, small assembly runs, or a supply chain configured for bagged parts. The primary distinction is delivery format: /RV is associated with tape-and-reel handling, whereas /V is listed in bags. Neither part should be selected without confirming that the target sensor's output amplitude, timing, clocking, reset behavior, and digital interface match the AFE. For a multi-channel sensor, neither single-channel option is sufficient without additional converter channels or a different system architecture.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ WM8253SCDS/V
Package 20-SSOP 20-SSOP
Brand Cirrus Logic Cirrus Logic
Number of Channels 1 channel 1 channel
ADC Resolution 16 bit 16 bit
Maximum Sampling Rate 6 MSPS 6 MSPS
Supply Voltage 3.3 V 3.3 V
Output Interface Width 4 bit wide 4 bit wide
Delivery Format Tape and reel Bag
Sensor Type CIS and CCD CIS and CCD

اہم امتیازی خصوصیات

  • Purpose-built image-sensor interface (بمقابلہWM8253SCDS/V)
  • Reel-ready ordering option (بمقابلہWM8253SCDS/V)
  • Compact imaging conversion (بمقابلہWM8253SCDS/V)

ڈیزائن نوٹس

Place the AFE close to the sensor connection and keep the analog input route short and symmetric. Follow the manufacturer layout recommendations for the input, reference, supply, and ground connections, and provide local bypassing at the device pins. Sensitive sensor lines should avoid switching-current paths and digital output routing. Because this is a high-resolution imaging AFE, trace geometry, return paths, and grounding can affect repeatability even when nominal conversion resolution is 16 bit.

Design the 3.3 V rail to support the device's documented 132 mW operating power without excessive ripple or transients. Confirm the actual supply-current behavior and permitted operating limits from the manufacturer datasheet for the selected clock rate and sensor mode. Use short supply and ground connections, local ceramic bypass capacitors, and an appropriately filtered source for the analog section. Avoid routing the sensor's switching clock currents through the AFE supply return path.

Do not treat a general-purpose ADC with the same resolution as an automatic replacement. Confirm input range, acquisition timing, clock polarity, reset behavior, reference arrangement, output protocol, and logic levels. For the verified WM8253SCDS/V substitute, also distinguish bag packaging from the tape-and-reel WM8253SCDS/RV ordering code. Verify the received device's marking, packing method, and lot documentation before approving the substitution.

Establish the sensor, AFE, and digital-controller timing budget before layout release. Account for clock distribution skew, sampling point, data-output setup and hold requirements, and the sensor's reset or blanking interval. The 6 MSPS rating describes the converter's maximum sampling capability; it does not by itself guarantee image quality if external clocks, traces, or sensor drive signals are poorly controlled.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The available product information does not provide component-level RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Request the applicable manufacturer compliance documentation and lot-specific certificate of conformance before production release.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-16 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

WM8253SCDS/RV datasheet WM8253SCDS/RV specifications WM8253SCDS/RV pinout WM8253SCDS/RV equivalent WM8253SCDS/RV replacement WM8253SCDS/RV vs WM8253SCDS/V Cirrus Logic WM8253SCDS/RV WM8253SCDS/RV 16 bit 6 MSPS WM8253SCDS/RV 20-SSOP WM8253SCDS/RV CIS CCD AFE WM8253SCDS/RV price WM8253SCDS/RV stock WM8253SCDS/RV footprint WM8253SCDS/RV application circuit

متعلقہ اجزاء اور اصطلاحات

Cirrus Logic Wolfson Microelectronics WM8253SCDS/RV WM8253SCDS/V analog front end AFE analog-to-digital converter ADC CIS image sensor CCD image sensor 16-bit conversion 6 MSPS sampling rate 3.3 V power supply 132 mW power consumption 4-bit wide output 20-SSOP package SSOP surface mount SMD image signal chain machine vision document scanner ISP FPGA semiconductor
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں