XC3S5000-4FGG676C - 5M Gate Spartan-3 FPGA | AMD
MPN: XC3S5000-4FGG676C ✗ Akhir HidupXC3S5000-4FGG676C Ringkasan
A field-programmable gate array is a programmable digital integrated circuit that combines configurable logic blocks, dedicated hardware resources, programmable I/O, and embedded memory. The Spartan-3 FPGA family occupies the logical hierarchy of programmable logic device > FPGA > integrated circuit, combining the flexibility of software-programmable logic with predictable hardware timing and parallel I/O.
The device provides 19,200 configurable logic blocks, equivalent to 74,880 logic cells, and includes 5,184 kbits of block RAM for buffering, packet storage, and data acquisition. Its four dedicated clock-management resources support clock generation, jitter attenuation, and phase-shift control. The listed operating-temperature range is 0°C to 85°C, and the -4 speed grade is intended for performance-oriented designs within the Spartan-3 family.
The 676-pin FBGA exposes a large I/O complement, allowing interfaces to parallel sensors, memory devices, communications controllers, and general-purpose buses without external multiplexing logic. Because this is a BGA package, correct land pattern design, assembly process control, and thermal management are essential. Configuration data and the active configuration interface must also be supported by the system design during power-up and operation.
Typical uses include industrial control, video and image processing, communications infrastructure, instrumentation, test equipment, and embedded consumer electronics. Its large logic and memory resources suit designs that benefit from parallel data paths, such as packet handling, signal conditioning, protocol conversion, and real-time control rather than sequential processor workloads.
For new Spartan-3-compatible designs, verify the pinout, configuration interface, supported I/O standards, clock requirements, and memory interfaces against the manufacturer datasheet before layout. Existing XC3S5000-4FGG676C boards can use the same-package XC3S5000-4FGG676I where its industrial temperature range is suitable, but a timing-grade, temperature-grade, or density change should be treated as a design-review item rather than an automatic substitution.
Alternatif penggantian untuk XC3S5000-4FGG676C — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian XC3S5000-4FGG676C (sama faktor bentuk dan footprint) — berbeda di dalam Block RAM, Device Type, Lifecycle Status, Logic Cells, Package.
XC3S5000-4FGG676I
✅ Drop-InKontak untuk harga
Lihat Datasheet →XC3S4000-4FGG676C
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
XC3S4000-4FGG676I
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
XC3S5000-4FGG676
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
XC3S5000-4FG676C
✅ Drop-InKontak untuk harga
Lihat Datasheet →XC3S5000-4FGG676C Rating Maksimal & Karakteristik Listrik
| Device Type | Spartan-3 Field Programmable Gate Array (FPGA) |
| System Gates | 5,000,000 gates |
| Logic Cells | 74,880 cells |
| Configurable Logic Blocks | 19,200 blocks |
| Maximum User I/Os | 784 I/Os |
| Block RAM | 5,184 kbits |
| Paket | 676-pin FBGA |
| Jumlah Pin | 676 pins |
| Lead-Free Package | Yes |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Suhu Kerja | 0°C to 85°C |
| Speed Grade | -4 |
| Clock Management Resources | 4 resources |
| Status Lingkungan Hidup | Obsolete |
| Status RoHS | ROHS3 compliant |
| Tipe Mounting | Surface Mount |
| Packaging | Tray |
XC3S5000-4FGG676C yes Diamant Konfigurasi Panduan
Konfigurasi pin untuk XC3S5000-4FGG676C (yes pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk XC3S5000-4FGG676C.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
XC3S5000-4FGG676C cocok untuk 6 aplikasis: Industrial Control and Automation, Video and Image Processing, Communications and Packet Processing, Test and Measurement Instrumentation, Embedded Sensor and Signal Conditioning, Aerospace Ground and Test Equipment.
Industrial Control and Automation
The AMD XC3S5000-4FGG676C fits industrial control systems that require many parallel inputs, deterministic logic, and substantial configuration flexibility. Its 74,880 logic cells, 19,200 configurable logic blocks, and up to 784 user I/Os allow controllers to combine sequencing, interlocks, signal acquisition, and communication in one FPGA. The 0°C to 85°C range suits ordinary indoor equipment. For installations with wider ambient requirements, the XC3S5000-4FGG676I provides an industrial-temperature option in the same 676-BGA package. Before replacement, verify logic utilization, I/O standards, clock jitter tolerance, and timing at the intended operating temperature.
Direkomendasikan
Video and Image Processing
The XC3S5000-4FGG676C is appropriate for parallel pixel pipelines, image pre-processing, and interface timing because its large logic fabric can execute multiple parallel stages concurrently. The 5,184 kbits of block RAM can support line buffers, frame storage, or lookup data, while the high I/O complement accommodates source and destination interfaces. Designers should use the manufacturer I/O tables to confirm voltage, slew-rate, and digital-standard constraints. As an obsolete device, new production should include complete timing analysis and a documented hardware and bitstream validation plan, particularly if the design is being migrated to a lower-density alternative.
Direkomendasikan
Communications and Packet Processing
The AMD XC3S5000-4FGG676C can serve as a dedicated packet-processing engine, protocol bridge, or test instrument because the Spartan-3 architecture provides 74,880 logic cells and multiple dedicated clock-management resources. Parallel slices can perform classification, filtering, framing, and buffering without relying on a sequential processor. Block RAM supports packet queues and descriptor structures, while the large I/O count enables wide or multi-channel data paths. Clocking and I/O implementation remain critical: use the manufacturer clocking and pinout documentation, constrain all interfaces correctly, and verify timing margins after any same-package substitution.
Direkomendasikan
Test and Measurement Instrumentation
The XC3S5000-4FGG676C is suitable for acquisition, pattern-generation, timing, and signal-conditioning logic in laboratory instruments. Its parallel FPGA fabric can execute multiple measurement channels concurrently, and its 5,184 kbits of block RAM can capture data near the measurement front end. The 676-BGA package also provides the I/O density needed to connect converters, trigger logic, and multiple data buses. Because the device is obsolete, preserve the original bitstream, constraint files, and validation records to support long-lived systems. Any replacement should undergo gain, timing, noise, and system-calibration comparison rather than relying only on package compatibility.
Direkomendasikan
Embedded Sensor and Signal Conditioning
The XC3S5000-4FGG676C can consolidate sensor conditioning, filtering, calibration, and interface control into a compact programmable logic device. Its 19,200 configurable logic blocks provide substantial parallelism for multiple sensor channels, while dedicated block RAM supports history buffers and calibration tables. The 0°C to 85°C operating range covers many ambient indoor systems, although the enclosure's worst-case temperature must be checked. For new designs, use the manufacturer pin-description tables to assign differential, mixed-signal-adjacent, and digital I/O carefully. If sourcing the industrial suffix, confirm startup behavior, temperature margins, and qualification requirements for the complete apparatus.
Direkomendasikan
Aerospace Ground and Test Equipment
The XC3S5000-4FGG676C can be used in ground-support test systems, simulation equipment, and legacy aerospace-control interfaces where deterministic parallel logic is valuable. Its large programmable fabric allows channel sequencing, waveform generation, fault injection, and interface adaptation to be consolidated in one device. The commercial 0°C to 85°C grade should be used only where the environmental qualification of the complete ground system permits it; airborne or extended-temperature deployments require an appropriately qualified device and system-level review. Because this exact part is obsolete, preserve traceability and avoid unverified changes to configuration, supply sequencing, or timing constraints.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk XC3S5000-4FGG676C — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | XC3S5000-4FGG676I | XC3S4000-4FGG676C | XC3S4000-4FGG676I | XC3S5000-4FGG676 | XC3S5000-4FG676C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-pin FBGA | 676-pin FBGA - same package | 676-pin FBGA - same package | 676-pin FBGA - same package | 676-pin FBGA - same package | 676-pin FBGA - same package |
| System Gates | 5,000,000 gates | 5,000,000 gates | 4,000,000 gates | 4,000,000 gates | 5,000,000 gates | 5,000,000 gates |
| Logic Cells | 74,880 cells | 74,880 cells | 62,208 cells | 62,208 cells | 74,880 cells | 74,880 cells |
| Speed Grade | -4 | -4 | -4 | -4 | -4 | -4 |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Lead-Free Ordering Code | Yes - FGG package code | Yes - FGG package code | Yes - FGG package code | Yes - FGG package code | Yes - FGG package code | No - FG package code |
Diferensiator Kunci
- Higher logic density within the same 676-BGA footprint (vsXC3S4000-4FGG676C)
- Broader commercial-to-industrial temperature option (vsXC3S5000-4FGG676I)
- Lead-free ordering code for Pb-free assembly programs (vsXC3S5000-4FG676C)
Catatan Desain
Use the manufacturer 676-FBGA land pattern and ball-map tables for PCB escape routing, power-plane construction, and assembly process design. This package has a fine ball pitch, so pad and solder-mask definitions, package tolerances, and assembly capability must be checked together. Route configuration, clock, and sensitive interface signals away from noisy switching nodes, while providing uninterrupted ground and plane connections under the device wherever the package design allows.
Implement the 1.2 V core supply with low-noise, independently decoupled power rails and follow the manufacturer recommended component values and sequencing requirements. Disturbances on the core supply can affect configuration reliability or internal logic timing even when the external interface is quiescent. Place decoupling components close to their associated supply balls, verify the power-supply startup profile, and include appropriate test points for troubleshooting production units.
Do not treat every 676-BGA Spartan-3 suffix as electrically interchangeable. The -4 speed grade, commercial versus industrial temperature suffix, Pb-free FGG versus non-Pb-free FG code, and device density can each affect procurement, qualification, or implementation. Before replacing XC3S5000-4FGG676C, compare the exact pin tables, utilization report, temperature requirement, configuration method, and timing results rather than relying only on the PCB footprint.
Apply manufacturer constraints for every external I/O standard and maintain continuous reference planes beneath high-speed routes. Configuration pins, clock inputs, and high-fanout nets should be considered sensitive to ringing and loading during configuration. Use controlled-impedance routing where required, avoid stubs, and keep external clock sources and decoupling paths short. Validate signal integrity and timing at the production test temperature rather than only at room temperature.
Estimated thermal design requirement: calculate worst-case junction rise using actual FPGA core and I/O dissipation, the package thermal characterization, and the board's effective heat-spreading area. The available power data does not establish a universal junction-temperature limit for every configuration, so obtain the appropriate datasheet limit before release. Increase copper area, improve via distribution, control enclosure temperature, or reduce switching activity if the calculated margin is insufficient.
Informasi Konformitas
The product listing identifies the 676-BGA package as lead-free and the device as ROHS3 compliant. No separate REACH, halogen-free, conflict-minerals, or automotive qualification statement is identified.