XC3S5000-4FGG676C - 5M Gate Spartan-3 FPGA | AMD
MPN: XC3S5000-4FGG676C ✗ Cuối đờiXC3S5000-4FGG676C Tóm tắt
A field-programmable gate array is a programmable digital integrated circuit that combines configurable logic blocks, dedicated hardware resources, programmable I/O, and embedded memory. The Spartan-3 FPGA family occupies the logical hierarchy of programmable logic device > FPGA > integrated circuit, combining the flexibility of software-programmable logic with predictable hardware timing and parallel I/O.
The device provides 19,200 configurable logic blocks, equivalent to 74,880 logic cells, and includes 5,184 kbits of block RAM for buffering, packet storage, and data acquisition. Its four dedicated clock-management resources support clock generation, jitter attenuation, and phase-shift control. The listed operating-temperature range is 0°C to 85°C, and the -4 speed grade is intended for performance-oriented designs within the Spartan-3 family.
The 676-pin FBGA exposes a large I/O complement, allowing interfaces to parallel sensors, memory devices, communications controllers, and general-purpose buses without external multiplexing logic. Because this is a BGA package, correct land pattern design, assembly process control, and thermal management are essential. Configuration data and the active configuration interface must also be supported by the system design during power-up and operation.
Typical uses include industrial control, video and image processing, communications infrastructure, instrumentation, test equipment, and embedded consumer electronics. Its large logic and memory resources suit designs that benefit from parallel data paths, such as packet handling, signal conditioning, protocol conversion, and real-time control rather than sequential processor workloads.
For new Spartan-3-compatible designs, verify the pinout, configuration interface, supported I/O standards, clock requirements, and memory interfaces against the manufacturer datasheet before layout. Existing XC3S5000-4FGG676C boards can use the same-package XC3S5000-4FGG676I where its industrial temperature range is suitable, but a timing-grade, temperature-grade, or density change should be treated as a design-review item rather than an automatic substitution.
Bộ thay thế dễ dàng lắp đặt cho XC3S5000-4FGG676C — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC3S5000-4FGG676C (cùng hình factor và footprint) — khác nhau ở Block RAM, Device Type, Lifecycle Status, Logic Cells, Package.
XC3S5000-4FGG676I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC3S4000-4FGG676C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC3S4000-4FGG676I
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC3S5000-4FGG676
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC3S5000-4FG676C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC3S5000-4FGG676C Tỷ lệ tối đa & tính chất điện
| Device Type | Spartan-3 Field Programmable Gate Array (FPGA) |
| System Gates | 5,000,000 gates |
| Logic Cells | 74,880 cells |
| Configurable Logic Blocks | 19,200 blocks |
| Maximum User I/Os | 784 I/Os |
| Block RAM | 5,184 kbits |
| Hộp | 676-pin FBGA |
| Số chân | 676 pins |
| Lead-Free Package | Yes |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Nhiệt độ hoạt động | 0°C to 85°C |
| Speed Grade | -4 |
| Clock Management Resources | 4 resources |
| Trạng thái vòng đời | Obsolete |
| Trạng thái RoHS | ROHS3 compliant |
| Kiểu lắp đặt | Surface Mount |
| Packaging | Tray |
Hướng dẫn cấu hình chân XC3S5000-4FGG676C yes
Cấu hình chân cho XC3S5000-4FGG676C (yes gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC3S5000-4FGG676C.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC3S5000-4FGG676C phù hợp cho 6 Áp dụngs: Industrial Control and Automation, Video and Image Processing, Communications and Packet Processing, Test and Measurement Instrumentation, Embedded Sensor and Signal Conditioning, Aerospace Ground and Test Equipment.
Industrial Control and Automation
The AMD XC3S5000-4FGG676C fits industrial control systems that require many parallel inputs, deterministic logic, and substantial configuration flexibility. Its 74,880 logic cells, 19,200 configurable logic blocks, and up to 784 user I/Os allow controllers to combine sequencing, interlocks, signal acquisition, and communication in one FPGA. The 0°C to 85°C range suits ordinary indoor equipment. For installations with wider ambient requirements, the XC3S5000-4FGG676I provides an industrial-temperature option in the same 676-BGA package. Before replacement, verify logic utilization, I/O standards, clock jitter tolerance, and timing at the intended operating temperature.
Được đề xuất
Video and Image Processing
The XC3S5000-4FGG676C is appropriate for parallel pixel pipelines, image pre-processing, and interface timing because its large logic fabric can execute multiple parallel stages concurrently. The 5,184 kbits of block RAM can support line buffers, frame storage, or lookup data, while the high I/O complement accommodates source and destination interfaces. Designers should use the manufacturer I/O tables to confirm voltage, slew-rate, and digital-standard constraints. As an obsolete device, new production should include complete timing analysis and a documented hardware and bitstream validation plan, particularly if the design is being migrated to a lower-density alternative.
Được đề xuất
Communications and Packet Processing
The AMD XC3S5000-4FGG676C can serve as a dedicated packet-processing engine, protocol bridge, or test instrument because the Spartan-3 architecture provides 74,880 logic cells and multiple dedicated clock-management resources. Parallel slices can perform classification, filtering, framing, and buffering without relying on a sequential processor. Block RAM supports packet queues and descriptor structures, while the large I/O count enables wide or multi-channel data paths. Clocking and I/O implementation remain critical: use the manufacturer clocking and pinout documentation, constrain all interfaces correctly, and verify timing margins after any same-package substitution.
Được đề xuất
Test and Measurement Instrumentation
The XC3S5000-4FGG676C is suitable for acquisition, pattern-generation, timing, and signal-conditioning logic in laboratory instruments. Its parallel FPGA fabric can execute multiple measurement channels concurrently, and its 5,184 kbits of block RAM can capture data near the measurement front end. The 676-BGA package also provides the I/O density needed to connect converters, trigger logic, and multiple data buses. Because the device is obsolete, preserve the original bitstream, constraint files, and validation records to support long-lived systems. Any replacement should undergo gain, timing, noise, and system-calibration comparison rather than relying only on package compatibility.
Được đề xuất
Embedded Sensor and Signal Conditioning
The XC3S5000-4FGG676C can consolidate sensor conditioning, filtering, calibration, and interface control into a compact programmable logic device. Its 19,200 configurable logic blocks provide substantial parallelism for multiple sensor channels, while dedicated block RAM supports history buffers and calibration tables. The 0°C to 85°C operating range covers many ambient indoor systems, although the enclosure's worst-case temperature must be checked. For new designs, use the manufacturer pin-description tables to assign differential, mixed-signal-adjacent, and digital I/O carefully. If sourcing the industrial suffix, confirm startup behavior, temperature margins, and qualification requirements for the complete apparatus.
Được đề xuất
Aerospace Ground and Test Equipment
The XC3S5000-4FGG676C can be used in ground-support test systems, simulation equipment, and legacy aerospace-control interfaces where deterministic parallel logic is valuable. Its large programmable fabric allows channel sequencing, waveform generation, fault injection, and interface adaptation to be consolidated in one device. The commercial 0°C to 85°C grade should be used only where the environmental qualification of the complete ground system permits it; airborne or extended-temperature deployments require an appropriately qualified device and system-level review. Because this exact part is obsolete, preserve traceability and avoid unverified changes to configuration, supply sequencing, or timing constraints.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC3S5000-4FGG676C — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC3S5000-4FGG676I | XC3S4000-4FGG676C | XC3S4000-4FGG676I | XC3S5000-4FGG676 | XC3S5000-4FG676C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-pin FBGA | 676-pin FBGA - same package | 676-pin FBGA - same package | 676-pin FBGA - same package | 676-pin FBGA - same package | 676-pin FBGA - same package |
| System Gates | 5,000,000 gates | 5,000,000 gates | 4,000,000 gates | 4,000,000 gates | 5,000,000 gates | 5,000,000 gates |
| Logic Cells | 74,880 cells | 74,880 cells | 62,208 cells | 62,208 cells | 74,880 cells | 74,880 cells |
| Speed Grade | -4 | -4 | -4 | -4 | -4 | -4 |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Lead-Free Ordering Code | Yes - FGG package code | Yes - FGG package code | Yes - FGG package code | Yes - FGG package code | Yes - FGG package code | No - FG package code |
Bảo phân biệt quan trọng
- Higher logic density within the same 676-BGA footprint (vsXC3S4000-4FGG676C)
- Broader commercial-to-industrial temperature option (vsXC3S5000-4FGG676I)
- Lead-free ordering code for Pb-free assembly programs (vsXC3S5000-4FG676C)
Ghi chú thiết kế
Use the manufacturer 676-FBGA land pattern and ball-map tables for PCB escape routing, power-plane construction, and assembly process design. This package has a fine ball pitch, so pad and solder-mask definitions, package tolerances, and assembly capability must be checked together. Route configuration, clock, and sensitive interface signals away from noisy switching nodes, while providing uninterrupted ground and plane connections under the device wherever the package design allows.
Implement the 1.2 V core supply with low-noise, independently decoupled power rails and follow the manufacturer recommended component values and sequencing requirements. Disturbances on the core supply can affect configuration reliability or internal logic timing even when the external interface is quiescent. Place decoupling components close to their associated supply balls, verify the power-supply startup profile, and include appropriate test points for troubleshooting production units.
Do not treat every 676-BGA Spartan-3 suffix as electrically interchangeable. The -4 speed grade, commercial versus industrial temperature suffix, Pb-free FGG versus non-Pb-free FG code, and device density can each affect procurement, qualification, or implementation. Before replacing XC3S5000-4FGG676C, compare the exact pin tables, utilization report, temperature requirement, configuration method, and timing results rather than relying only on the PCB footprint.
Apply manufacturer constraints for every external I/O standard and maintain continuous reference planes beneath high-speed routes. Configuration pins, clock inputs, and high-fanout nets should be considered sensitive to ringing and loading during configuration. Use controlled-impedance routing where required, avoid stubs, and keep external clock sources and decoupling paths short. Validate signal integrity and timing at the production test temperature rather than only at room temperature.
Estimated thermal design requirement: calculate worst-case junction rise using actual FPGA core and I/O dissipation, the package thermal characterization, and the board's effective heat-spreading area. The available power data does not establish a universal junction-temperature limit for every configuration, so obtain the appropriate datasheet limit before release. Increase copper area, improve via distribution, control enclosure temperature, or reduce switching activity if the calculated margin is insufficient.
Thông tin tuân thủ
The product listing identifies the 676-BGA package as lead-free and the device as ROHS3 compliant. No separate REACH, halogen-free, conflict-minerals, or automotive qualification statement is identified.