XC4VSX55-11FF1148C - 55,296-Cell Virtex-4 SX FPGA | AMD
MPN: XC4VSX55-11FF1148C ✗ Akhir HidupXC4VSX55-11FF1148C Ringkasan
A field-programmable gate array is a semiconductor device whose digital logic, interconnect and input/output behavior are defined by a configuration bitstream. Within the product hierarchy, an FPGA is a programmable-logic semiconductor more complex than a simple logic device or CPLD. The Virtex-4 SX family combines large logic capacity with selectable embedded resources, dedicated I/O structures and high-speed serial capability for designs requiring parallel datapaths and robust connectivity.
The XC4VSX55-11FF1148C includes 55,296 logic cells organized into 6,144 CLBs, with 640 user I/Os and 5,898,240 bits of block RAM in the documented device configuration. Its -11 speed grade targets a balance between operating performance and power efficiency, while the commercial C suffix identifies the intended temperature grade. The 1,148-ball FCBGA package provides the dense pin and power distribution required by this large FPGA.
Its Virtex-4 architecture supports selectable input and output standards, dedicated block RAM, DSP-oriented arithmetic resources and high-speed serial interfaces. The 90 nm CMOS implementation also places this device in the era of large, high-performance FPGA systems commonly used for protocol conversion, image processing, test equipment, industrial control and communications infrastructure. Configuration data may be loaded from external memory through supported serial or parallel configuration methods described by the manufacturer documentation.
Typical applications include high-throughput packet processing, video and image pipelines, industrial automation, communications gateways, laboratory instrumentation and high-speed storage controllers. The large logic-cell count allows substantial parallelism, while the 640 I/Os support wide external data buses and multiple control interfaces. Designers should map critical I/O standards and high-speed interfaces through the pinout and device-specific design files rather than assuming interchangeable behavior across packages.
Power and signal integrity require careful PCB planning. The 1,148-ball package demands dense escape routing, controlled-layer stackups and a properly engineered power-delivery network. Decoupling must be distributed across the package because a large FPGA can exhibit rapidly changing current demand as its logic activity changes. Decoupling capacitance, regulator bandwidth and the number and placement of power vias should be reviewed against the manufacturer power-guidance documents.
This page organizes the device’s key electrical, logical and packaging characteristics, compares speed- and temperature-grade alternatives, and provides practical guidance for FPGA integration. It also identifies which specifications require confirmation from the Virtex-4 product specification and package files before schematic release, PCB layout or production programming.
Alternatif penggantian untuk XC4VSX55-11FF1148C — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian XC4VSX55-11FF1148C (sama faktor bentuk dan footprint) — berbeda di dalam Device Type, Operating Temperature, Package Type, User I/O.
XC4VSX55-11FF1148I
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →XC4VSX55-10FF1148C
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
XC4VSX55-12FF1148C
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
XC4VSX55-10FF1148I
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
XC4VSX55-12FF1148I
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
XC4VSX55-11FF1148C Rating Maksimal & Karakteristik Listrik
| Device Type | Virtex-4 SX Field Programmable Gate Array |
| Logic Cells | 55,296 cells |
| Configurable Logic Blocks | 6,144 CLBs |
| User I/O | 640 I/Os |
| Block RAM | 5,898,240 bits |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -11 |
| Temperature Grade | Commercial |
| Package Type | 1,148-ball FCBGA |
| Package Pin Count | 1,148 balls |
| Programmable Logic Type | SRAM-configured FPGA |
| Tipe Mounting | Surface mount |
| Internal Frequency | 1,028 MHz |
| Suhu Kerja | 0°C to 85°C |
| Logic Family | CMOS |
XC4VSX55-11FF1148C 1,148 balls Diamant Konfigurasi Panduan
Konfigurasi pin untuk XC4VSX55-11FF1148C (1,148 balls pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk XC4VSX55-11FF1148C.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
XC4VSX55-11FF1148C cocok untuk 6 aplikasis: High-Throughput Packet Processing, Industrial Automation and Control, Communications Gateway and Protocol Conversion, Video and Image Processing Pipelines, Test and Measurement Instrumentation, Aerospace and Defense Simulation.
High-Throughput Packet Processing
The XC4VSX55-11FF1148C fits packet-processing systems requiring parallel classification, filtering and header manipulation because it provides 55,296 logic cells, 6,144 CLBs and 5,898,240 bits of block RAM. Its 640 user I/Os can support wide packet buses, status signals and multiple physical interfaces. Place the FPGA beside network PHYs and use the Virtex-4 selectable I/O standards to match the board interface. Configuration should be stored in external flash, while the large block RAM can sustain lookup tables, queues and packet buffers. Because the -11 grade sits between the -10 and -12 options, timing should be closed with the device speed grade selected in the implementation tools.
Direkomendasikan
Industrial Automation and Control
The XC4VSX55-11FF1148C can implement parallel machine-control logic, motion sequencing and real-time sensor processing in a commercial-temperature industrial product. Its 640 I/Os provide substantial connectivity for encoders, programmable I/O, field buses and discrete control signals, while 6,144 CLBs support state machines and datapath logic. The 1.2 V core should be supplied by a regulator designed for the FPGA's transient current profile, with dense local decoupling and multiple package-ball connections. For installations with extended temperature requirements, the -11 I-grade family variant is the more appropriate order code. Isolation, grounding and surge protection must be designed around the external interfaces rather than assumed to be handled by the FPGA.
Direkomendasikan
Communications Gateway and Protocol Conversion
The XC4VSX55-11FF1148C is suitable for communications gateways that translate between serial links, parallel buses and packet formats at line rate. Its large fabric supports multiple clock domains, width converters, FIFOs and protocol engines, while 5,898,240 bits of block RAM provide storage for frame buffering and lookup structures. The 640 I/Os support parallel interfaces where pin and voltage-standard budgets allow. Place high-speed serial and memory interfaces according to the Virtex-4 pinout files, and constrain their timing using the -11 speed grade. External flash should hold the configuration image, while independent clocking and power sequencing should prevent configuration or interface upset during rail startup.
Direkomendasikan
Video and Image Processing Pipelines
The XC4VSX55-11FF1148C can implement parallel image-processing pipelines because its 55,296 logic cells provide substantial arithmetic and control capacity and its block RAM supports line buffers and working storage. The 640 I/Os allow high-throughput pixel buses to be distributed among multiple functional blocks when timing and I/O-standard budgets permit. Use the selectable I/O capabilities for compatible interfaces and match the clocking architecture to the source and destination data rates. The -11 speed grade should be used for timing analysis rather than the faster -12 assumptions. PCB design must provide short, impedance-controlled routes for high-speed interfaces, continuous power planes and local decoupling across the large 1,148-ball package.
Direkomendasikan
Test and Measurement Instrumentation
The XC4VSX55-11FF1148C fits modular laboratory instruments requiring parallel acquisition channels, deep sample storage, pattern generation and real-time analysis. Its 6,144 CLBs can implement multiple acquisition engines and control paths, while 5,898,240 bits of block RAM can serve as acquisition buffers, correlation memory or waveform storage. The 640 I/Os provide broad connectivity to converters, relays, triggers and control peripherals. Designers should assign acquisition and trigger paths carefully to avoid routing congestion, then verify each interface against the package pinout file. Power sequencing, clean references and short return paths are critical because measurement accuracy depends on supply noise and clock jitter as well as digital logic performance.
Direkomendasikan
Aerospace and Defense Simulation
The XC4VSX55-11FF1148C can serve as the programmable core in simulation, data-recording and ground-support systems where parallel logic and block RAM are more important than a small package. The commercial C suffix limits the environmental envelope, so an I-grade or other specifically qualified order code must be selected when the deployment requires extended temperature operation or formal aerospace qualification. The 1,148-ball FCBGA footprint supports a large pin budget for interfaces, while the 90 nm Virtex-4 architecture remains established for legacy systems. Configuration storage should include robust startup behavior, and FPGA power rails should be sequenced according to the manufacturer guidance for the selected device and package. Formal qualification status must be checked for the exact order code before release.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk XC4VSX55-11FF1148C — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | XC4VSX55-11FF1148I | XC4VSX55-10FF1148C | XC4VSX55-12FF1148C | XC4VSX55-10FF1148I | XC4VSX55-12FF1148I |
|---|---|---|---|---|---|---|
| Package | 1,148-ball FCBGA | 1,148-ball FCBGA | 1,148-ball FCBGA | 1,148-ball FCBGA | 1,148-ball FCBGA | 1,148-ball FCBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Virtex-4 SX | Virtex-4 SX | Virtex-4 SX | Virtex-4 SX | Virtex-4 SX | Virtex-4 SX |
| Speed Grade | -11 | -11 | -10 | -12 | -10 | -12 |
| Temperature Grade | Commercial C | Industrial I | Commercial C | Commercial C | Industrial I | Industrial I |
| Logic Cells | 55,296 cells | 55,296 cells | 55,296 cells | 55,296 cells | 55,296 cells | 55,296 cells |
| Configurable Logic Blocks | 6,144 CLBs | 6,144 CLBs | 6,144 CLBs | 6,144 CLBs | 6,144 CLBs | 6,144 CLBs |
| User I/O | 640 I/Os | 640 I/Os | 640 I/Os | 640 I/Os | 640 I/Os | 640 I/Os |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
Diferensiator Kunci
- Substantial parallel-logic capacity with dedicated block RAM (vsXC4VLX40-11FF1148I)
- Commercial-grade -11 speed configuration (vsXC4VSX55-10FF1148C)
- Lower timing target than the -12 family variant (vsXC4VSX55-12FF1148C)
- Commercial-temperature ordering option (vsXC4VSX55-11FF1148I)
Catatan Desain
Design the 1.2 V core rail around the device-specific power guidance rather than a generic regulator selection. Distribute local bulk and high-frequency decoupling across the 1,148-ball package, connect supply and ground balls with multiple nearby vias, and use continuous reference planes to minimize loop area. Verify the regulator’s transient response with the expected logic activity because the device combines 55,296 logic cells with 5,898,240 bits of block RAM and can demand rapid dynamic-current changes.
Use the Virtex-4 package drawing and device pinout files to create the FCBGA land pattern and escape routing. A 1,148-ball device offers little routing room between adjacent balls, so escape layers, component placement and via-in-pad or microvia strategy must be coordinated before routing. Preserve a continuous ground reference beneath signal escapes, maintain the manufacturer’s ball-pitch and solder-mask-land recommendations, and account for package coplanarity and assembly tolerances.
Do not interchange FF1148C and FFG1148I solely because the logic resources and ball count match. The C and I suffixes identify commercial and industrial temperature grades, while the position of G in the package code also affects the exact ordering interpretation. Review the Virtex-4 ordering guide, confirm the package pinout file for the exact suffix, and select the device speed grade consistently in synthesis, implementation, timing analysis and production programming.
Apply the manufacturer I/O and clocking guidance before assigning high-speed interfaces. Match external memory, source-synchronous and serial interfaces to the published pin constraints and I/O standards, and keep clocks away from noisy switching paths. Use the correct -11 timing constraints for implementation and post-route timing analysis. If migrating to the -12 grade, repeat static and dynamic timing checks instead of assuming that the faster device can use a relaxed design without power or clock verification.
Informasi Konformitas
No explicit compliance declarations for the exact XC4VSX55-11FF1148C order code were established. Confirm RoHS, REACH, lead-free, halogen-free and conflict-minerals status from the manufacturer’s current material-declaration records before procurement.