AMD

XC4VSX55-11FF1148I - 55,296-Cell Virtex-4 SX FPGA | AMD

MPN: XC4VSX55-11FF1148I ✗ End of Life
1.2 V Vdss 1,148-ball FCBGA Package 1,028 MHz Speed
MOQ: 1 |

XC4VSX55-11FF1148I Overview

The AMD XC4VSX55-11FF1148I is a Virtex-4 SX field-programmable gate array with 55,296 logic cells, 6,144 configurable logic blocks, 640 I/O, and a 1,148-ball FCBGA package. It uses 90 nm CMOS technology and is identified by the -11 speed grade. The device combines programmable logic, selectable I/O standards, block RAM, and dedicated DSP resources in a single high-density FPGA package.

A field-programmable gate array is a semiconductor device whose digital logic and interconnect are configured after manufacture. Within the product hierarchy, an FPGA is a programmable logic device, a reconfigurable semiconductor, and a member of the broader digital IC family. Virtex-4 SX devices target high-performance signal processing, communications, networking, embedded systems, and test equipment where parallel processing, high pin count, and flexible I/O are valuable.

The XC4VSX55-11FF1148I provides 55,296 logic cells organized into 6,144 configurable logic blocks. Its listed internal frequency is 1,028 MHz, while a related FFG1148 configuration is described elsewhere as supporting up to 1,205 MHz under its own operating conditions. The device includes 640 user I/O in a 1,148-ball FCBGA package, providing substantial connectivity for parallel buses, memory interfaces, high-speed links, and mixed-signal interfaces.

The -11 suffix denotes the device speed grade, while the 1148 package code identifies the high-ball-count FCBGA footprint. The I suffix identifies the industrial-temperature ordering variant, and the package construction is described as lead-free and RoHS compliant. Configuration data can be loaded through supported FPGA configuration modes, including serial or parallel paths defined by the Virtex-4 device architecture.

Typical uses include high-throughput communications, video and image processing, industrial control, networking equipment, test and measurement, and high-speed interface aggregation. The large logic-cell count allows parallel datapaths and substantial buffering, while DSP blocks accelerate multiply-accumulate operations used in filtering and signal processing. The 1,148-ball package also supports dense power, ground, clock, configuration, and user-I/O assignments.

PCB implementation must follow the AMD Virtex-4 package pinout and power-guidance documents exactly. Decoupling, layer transitions, ball escape routing, clock integrity, configuration access, and thermal management require careful planning because the large BGA footprint presents difficult routing and assembly constraints. A replacement should match the exact speed grade, temperature grade, package, configuration, and device resources.

This page consolidates the device identity, package characteristics, lifecycle considerations, design guidance, and technically qualified replacement options into a practical engineering reference. It also distinguishes exact-footprint alternatives from Virtex-4 devices that use different packages and therefore require redesigned PCB layouts.

Drop-in alternatives for XC4VSX55-11FF1148I — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with XC4VSX55-11FF1148I (same form factor and footprint) — differing in Package Type, Device Type, Mounting Type, Operating Temperature, User I/O.

AMD
Package Type: 1,148-ball FCBGA
Device Type: Virtex-4 SX Field Programmable Gate Array
Operating Temperature: 0°C to 85°C
Compare with XC4VSX55-11FF1148I →
AMD
Package Type: FCBGA-1148
Mounting Type: Surface-mount BGA
Operating Temperature: 0°C to 85°C
Compare with XC4VSX55-11FF1148I →

XC4VSX55-11FFG1148I

✅ Drop-In
📦 1,148-ball FCBGA
Same Virtex-4 SX resources and -11 speed grade; ordering and package-construction codes differ by 0% in the listed logic-cell, CLB, I/O, frequency, and supply values.

📋 Reference alternative (not in catalog)

XC4VSX55-11FF1148C

✅ Drop-In
AMD
📦 1,148-ball FCBGA
Virtex-4 SX Field Programmable Gate Array · 55,296 cells · 6,144 CLBs · 640 I/Os · 5,898,240 bits · 90 nm CMOS · 1.2 V · -11

Contact for price

View Datasheet →

XC4VSX55-11FFG1148C

✅ Drop-In
AMD
📦 1,148-ball FCBGA
Virtex-4 SX field-programmable gate array · 55,296 cells · 6,144 CLBs · 640 I/O · 1,028 MHz · 1,205 MHz · CMOS · -11

Contact for price

View Datasheet →

XC4VSX55-11FFG1148CS2

✅ Drop-In
📦 1,148-ball FCBGA
Same 1,148-ball package and 6,144 CLBs with 55,296 logic cells; S2 ordering suffix and commercial-temperature grade require qualification review.

📋 Reference alternative (not in catalog)

XC4VSX55-11FF1148I Maximum Ratings & Electrical Characteristics

Device Type Virtex-4 SX field-programmable gate array
Logic Cells 55,296 cells
Configurable Logic Blocks 6,144 CLBs
User I/O 640 I/O
Package 1,148-ball FCBGA
Package Type FBGA-1148
Process Technology 90 nm CMOS
Internal Frequency 1,028 MHz
Speed Grade -11
Operating Temperature 0°C to +85°C
Supply Voltage 1.2 V
Logic Family CMOS
Mounting Type Surface mount
RoHS Status Lead-free and RoHS compliant

XC4VSX55-11FF1148I fbga-1148 Pin Configuration Guide

Pin configuration for XC4VSX55-11FF1148I (fbga-1148 package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

fbga-1148 package pinout diagram for XC4VSX55-11FF1148I

No detailed pinout data available for XC4VSX55-11FF1148I.

Refer to the datasheet for full pin configuration.

Typical Applications

XC4VSX55-11FF1148I is suitable for 6 applications: Industrial Control and Automation, Communications and Network Equipment, Video and Image Processing, Test and Measurement Systems, High-Speed Interface Aggregation, Signal Processing and DSP.

🏭

Industrial Control and Automation

The XC4VSX55-11FF1148I fits industrial controllers that combine parallel machine I/O with substantial digital logic in one device. Its 640 user I/O and 55,296 logic cells allow teams to combine control logic, communication protocols, event logging, and diagnostics without using multiple programmable logic devices. The 0°C to +85°C industrial-temperature rating supports equipment operating across controlled factory environments. The 1,148-ball FCBGA provides dedicated routing resources but demands careful BGA layout, layer-transition planning, thermal analysis, and decoupling. Engineers should use the AMD package files for ball assignments and verify each power domain against the product specification before fabrication.

🌐

Communications and Network Equipment

The XC4VSX55-11FF1148I is suitable for communications equipment requiring many parallel lanes, deep programmable logic, and flexible interface assignments. Its 640 I/O can support control buses, backplanes, status signals, and multiple data interfaces, while 6,144 CLBs support protocol engines, packet processing, and buffering. The -11 speed grade provides a defined performance class for timing-sensitive designs. At the 1,028 MHz listed internal frequency, system architects should treat this value as a device characteristic rather than a guaranteed user-clock rate. Proper clocking, controlled-impedance routing, and power conditioning are essential for reliable data-path operation.

📺

Video and Image Processing

The XC4VSX55-11FF1148I can support parallel video pipelines, image filtering, pixel transport, frame timing, and control logic because it combines 55,296 logic cells with 640 I/O. Parallel datapaths are easier to implement efficiently in FPGA fabric than in a general-purpose processor, while the high pin count provides room for parallel pixel buses, memory interfaces, and synchronization signals. The large FCBGA also supports dense power and ground distribution, reducing loop impedance when implemented correctly. Designers should constrain timing for video pixel rates, use source-synchronous interfaces where required, and validate the configuration scheme before committing the board layout.

🖥️

Test and Measurement Systems

The XC4VSX55-11FF1148I is well suited to modular test and measurement systems that need parallel stimulus generation, acquisition control, timing logic, and communication processing in a single device. The 6,144 CLBs allow multiple instrument channels to share a common architecture, while 640 I/O provides connectivity to converters, memories, trigger logic, and host interfaces. Its industrial-temperature grade is appropriate for controlled test environments. Signal-integrity work must include controlled-impedance routing, proper termination, clock jitter budgeting, and isolated power distribution. The device's obsolete lifecycle also makes component traceability and configuration-bitstream compatibility important during long-lived test-system programs.

🔧

High-Speed Interface Aggregation

The XC4VSX55-11FF1148I can aggregate multiple narrow interfaces into a parallel FPGA datapath, making it useful in interface concentrators, protocol bridges, and embedded control subsystems. Its 640 I/O provides substantial pin-level parallelism, while 55,296 logic cells support buffering, translation, state machines, and protocol-specific transforms. The -11 speed grade should be included in timing-closure calculations rather than treating the listed 1,028 MHz internal frequency as a universal operating clock. PCB implementation requires exact BGA escape routing, matched-length groups where required, and clean separation between high-speed, low-speed, power, and ground paths.

⚡

Signal Processing and DSP

The XC4VSX55-11FF1148I supports parallel filtering, digital conversion, correlation, waveform generation, and other fixed-point signal-processing tasks implemented in programmable fabric. The 55,296 logic cells and 6,144 CLBs provide parallel lanes that can outperform sequential software execution for suitable workloads. Its 640 I/O allows direct connection to converters, parallel memories, and custom accelerator logic. DSP-specific block counts are not established for this ordering code, so projects requiring hard DSP resources should confirm the exact device resource map before architecture selection. Clock jitter, I/O standards, pipeline latency, and timing margins should be evaluated together to determine the achievable sample rate.

What is the AMD XC4VSX55-11FF1148I?
The AMD XC4VSX55-11FF1148I is a Virtex-4 SX FPGA with 55,296 logic cells, 6,144 configurable logic blocks, 640 user I/O, and a 1,148-ball FCBGA package. It is manufactured using 90 nm CMOS technology. According to the device product specification, the -11 suffix identifies the speed grade, while the final I identifies the industrial-temperature variant.
What are the key specifications of XC4VSX55-11FF1148I?
The XC4VSX55-11FF1148I combines 55,296 logic cells, 6,144 CLBs, 640 user I/O, a 1,028 MHz listed internal frequency, and a 1,148-ball FCBGA package. The device uses 90 nm CMOS technology and operates from 0°C to +85°C in the industrial-temperature version. Its 1.2 V supply designation and 640 I/O make it suitable for high-density parallel processing and interface-rich designs.
Where can I download the XC4VSX55-11FF1148I datasheet PDF?
The XC4VSX55-11FF1148I product specification PDF is available from the Xilinx document link reproduced on this page, while AMD provides the official Virtex-4 package and pinout files as a separate technical resource. Download the product specification for logic, configuration, electrical, and timing information, and use the package files when assigning every one of the 1,148 BGA balls.
Where can I find the XC4VSX55-11FF1148I pinout and package files?
AMD's official Virtex-4 Package Device Pinout Files page provides package information for the XC4VSX55 in its 1,148-ball FCBGA package. Use those files for PCB ball assignment, and cross-check each signal against the manufacturer product specification. Because the package has 1,148 balls, relying on a simplified generic pin diagram can cause configuration, clock, power, or differential-I/O assignments to be incorrect.
What is the operating temperature range of XC4VSX55-11FF1148I?
The XC4VSX55-11FF1148I industrial-temperature variant is specified for an operating range of 0°C to +85°C. The I suffix in the ordering code identifies this temperature grade. If a replacement uses the commercial C suffix, confirm that its specified temperature range satisfies the enclosure temperature, startup conditions, and worst-case junction conditions of the finished equipment.
Is XC4VSX55-11FF1148I suitable for industrial control systems?
The XC4VSX55-11FF1148I is suitable for industrial control systems when its 0°C to +85°C industrial-temperature specification and 640 I/O capacity meet the design requirements. Its 55,296 logic cells support parallel control, monitoring, and data-processing functions. The final qualification depends on the complete system, including power quality, enclosure temperature, EMC requirements, and long-term availability.
When should I choose XC4VSX55-11FF1148I instead of another Virtex-4 device?
Choose the XC4VSX55-11FF1148I when the design requires the Virtex-4 SX resource level of 55,296 logic cells, the -11 speed grade, industrial-temperature operation, and the exact 1,148-ball FCBGA footprint. A smaller device may fit a low-resource design, while a different package requires PCB routing changes. The device is obsolete, so long-life production should also include a documented obsolescence-mitigation plan.
What can replace XC4VSX55-11FF1148I?
The closest documented replacements are the Virtex-4 SX 1,148-ball variants XC4VSX55-11FFG1148I, XC4VSX55-11FF1148C, XC4VSX55-11FFG1148C, and XC4VSX55-11FFG1148CS2. Each requires validation of package ballout, temperature grade, configuration interface, device ID, timing margins, and qualification status. The C variants are not automatically equivalent to the industrial-temperature target.
Is XC4VSX55-11FF1148I the same as XC4VSX55-11FFG1148I?
The XC4VSX55-11FFG1148I is closely related to the target because both identify a Virtex-4 SX device in a 1,148-ball package, but they should not be treated as identical without review. Ordering-code and package-construction differences can affect lead finish, marking, procurement, or qualification. Confirm the AMD device table, package drawing, pinout, and production status before treating it as a drop-in substitution.
What is the best AMD equivalent for XC4VSX55-11FF1148I?
The best documented AMD-family equivalent is XC4VSX55-11FFG1148I because it retains the Virtex-4 SX identity, 6,144 CLBs, 55,296 logic cells, 640 I/O, and 1,148-ball FCBGA format. A functional qualification is still required because the target is obsolete and availability is limited. Request a quote through the Request a Quote form on this page for current availability and lot-condition information.
How do XC4VSX55-11FF1148I and XC4VSX55-11FF1148C differ?
The principal documented difference is temperature grade: the target XC4VSX55-11FF1148I is the industrial-temperature I variant, while XC4VSX55-11FF1148C uses the C suffix for the commercial-temperature ordering option. Both retain the same Virtex-4 SX family, -11 speed grade, 55,296 logic cells, and 1,148-ball FCBGA format. The commercial part is suitable only when its temperature limits meet the equipment specification.
Where can I buy XC4VSX55-11FF1148I?
Use the Request a Quote form on this page to request XC4VSX55-11FF1148I availability, condition, lead time, and minimum order quantity. Because this Virtex-4 device is obsolete, current supply may be limited and traceability may affect acceptance criteria. State the required quantity, date code requirements, packaging condition, and inspection needs in the request.
What is the price of XC4VSX55-11FF1148I?
The current unit price is not fixed on this page because obsolete FPGA pricing depends on quantity, traceability, condition, and date-code availability. Submit an XC4VSX55-11FF1148I request through the Request a Quote form on this page. The quotation process can account for exact MPN matching, market availability, inspection requirements, and the production schedule for the project.
What is the lead time for XC4VSX55-11FF1148I?
The lead time depends on current obsolete-device supply and should be confirmed through the Request a Quote form on this page. For an FPGA program, include the required quantity, acceptable date codes, package condition, temperature grade, and qualification deadline. If availability is limited, ask whether a lot split or scheduled replenishment can support production without creating a mixed-traceability risk.
Is XC4VSX55-11FF1148I in stock?
Current stock status should be confirmed through the Request a Quote form on this page rather than inferred from a distributor landing page. The device is an older Virtex-4 SX FPGA, so available inventory may vary by date code and condition. Provide your required quantity and acceptance criteria, and request a written availability response before committing the production build.
What design considerations matter for the XC4VSX55-11FF1148I power rails?
The XC4VSX55-11FF1148I requires careful multi-rail power distribution because the device uses a 1.2 V core designation and numerous dedicated power and ground balls. Follow the manufacturer power-supply and decoupling guidance, including the specified capacitor types, voltage tolerances, and ball-specific connections. Estimated power depends on logic activity, I/O loading, clocking, and junction temperature, so measure the finished board under worst-case workloads.

Engineering reference data for XC4VSX55-11FF1148I — comparison, design guidance, and compliance information.

Selection Guide

Choose the XC4VSX55-11FF1148I when an existing Virtex-4 SX design specifically requires 55,296 logic cells, 6,144 CLBs, 640 I/O, the -11 speed grade, industrial-temperature operation, and the 1,148-ball FCBGA footprint. XC4VSX55-11FFG1148I is the closest documented alternative, but its ordering and package-construction codes still require formal review. Use the C-grade variants only when the commercial-temperature range is acceptable; otherwise they may fail environmental requirements despite matching the package and core resources. XC4VSX55-11FFG1148CS2 requires additional validation because its S2 suffix may represent different ordering or qualification attributes. The device is obsolete, so engineers must also consider migration to a current AMD FPGA or adaptive SoC. Such a migration is not a drop-in substitution because it requires a new PCB design, tool flow, constraints, and verification effort.

Comparison with Alternatives

Parameter This Product XC4VSX55-11FFG1148I XC4VSX55-11FF1148C XC4VSX55-11FFG1148C XC4VSX55-11FFG1148CS2
Brand AMD AMD AMD AMD AMD
Package 1,148-ball FCBGA 1,148-ball FCBGA 1,148-ball FCBGA 1,148-ball FCBGA 1,148-ball PBGA
Logic Cells 55,296 cells 55,296 cells 55,296 cells 55,296 cells 55,296 cells
Configurable Logic Blocks 6,144 CLBs 6,144 CLBs 6,144 CLBs 6,144 CLBs 6,144 CLBs
User I/O 640 I/O 640 I/O 640 I/O 640 I/O 640 I/O
Internal Frequency 1,028 MHz 1,028 MHz 1,028 MHz 1,028 MHz 1,205 MHz maximum
Speed Grade -11 -11 -11 -11 -11
Process Technology 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS

Key Differentiators

  • Industrial-temperature ordering option (vs XC4VSX55-11FF1148C)
  • Full Virtex-4 SX resource allocation in one 1,148-ball device (vs XC4VFX60-11FF1152C)
  • Deterministic -11 speed-grade selection (vs XC4VSX55-12SFG363C)

Design Notes

Use the official Virtex-4 package files and exact 1,148-ball pinout when defining the PCB footprint. Route power, ground, configuration pins, clocks, and user I/O according to their assigned balls rather than approximating the package with a generic BGA. Pay particular attention to layer transitions and escape paths because the dense FCBGA requires a manufacturing process capable of producing the specified ball geometry and pad definition.

Implement the manufacturer-defined core and I/O supply rails as separate, low-impedance distribution networks with local decoupling at the device balls. Follow the product specification for capacitor quantity, voltage rating, placement, and permissible ripple. Estimated core dissipation is (VIN - VOUT) multiplied by Icore, so actual consumption depends on design activity and clocking. Validate the power tree at maximum operating activity and elevated temperature rather than assuming nominal design activity represents the worst case.

Constrain clocks and high-speed interfaces with device-supported I/O standards and suitable external terminations. Account for package and board delay when budgeting timing margins, and keep clock distribution symmetrical where the architecture permits. The listed 1,028 MHz internal frequency is not a substitute for a completed timing analysis; achievable system frequency depends on the selected clock path, I/O standard, routing, loading, speed grade, and design margins.

Compliance Information

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Yes
Halogen Free
Unknown
Conflict Minerals
Unknown

The component is identified as lead-free and RoHS compliant. No explicit REACH, halogen-free, conflict-minerals, or automotive-qualification statement was identified.

Related Searches

xc4vsx55 11ffg1148i XC4VSX55-11FF1148I datasheet XC4VSX55-11FF1148I datasheet pdf XC4VSX55-11FF1148I pinout XC4VSX55-11FF1148I package AMD XC4VSX55-11FF1148I XC4VSX55-11FF1148I equivalent XC4VSX55-11FF1148I replacement XC4VSX55-11FF1148I cross reference XC4VSX55-11FF1148I vs XC4VSX55-11FFG1148I XC4VSX55-11FF1148I price XC4VSX55-11FF1148I stock XC4VSX55-11FF1148I industrial control XC4VSX55-11FF1148I communications XC4VSX55-11FF1148I footprint

Related Components & Terms

AMD Xilinx XC4VSX55-11FF1148I XC4VSX55-11FFG1148I XC4VSX55-11FF1148C XC4VSX55-11FFG1148C XC4VSX55-11FFG1148CS2 Virtex-4 SX field-programmable gate array FPGA programmable logic device digital IC semiconductor 55,296 logic cells 6,144 configurable logic blocks 640 user I/O 90 nm CMOS 1.2 V supply FCBGA-1148 BGA surface-mount package industrial control communications equipment video processing test and measurement
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details