AMD

XC7Z015-3CLG485E - Dual Cortex-A9 Zynq-7000 SoC | AMD

MPN: XC7Z015-3CLG485E ✓ Aktif
1.5 V, 2 V, and 2.5 V Vdss 485-CSPBGA, 19 x 19 mm Package 866 MHz Speed
MOQ: 1 |

XC7Z015-3CLG485E Ringkasan

The AMD XC7Z015-3CLG485E is a Zynq-7000 system on chip integrating a dual-core Arm Cortex-A9 MPCore processor with an Artix-7 FPGA fabric, 74K logic cells, and an 866 MHz processor operating point in a 485-CSPBGA package measuring 19 x 19 mm. The device combines programmable logic, hard real-time processing, and CoreSight debug support in one package.

A Zynq-7000 SoC is a heterogeneous programmable system-on-chip. Its Arm Cortex-A9 processing system executes operating-system-level software, while the FPGA fabric supports parallel hardware acceleration, custom interfaces, and signal processing. The combination places software control and programmable logic on one device, reducing interconnects and allowing designers to partition workloads between general-purpose processors and dedicated hardware logic.

Key features include two Arm Cortex-A9 cores operating at 866 MHz, 74K FPGA logic cells, and 160 DSP resources. The processor subsystem uses a 32-bit RISC architecture and supports supply rails identified as 1.5 V, 2 V, and 2.5 V. CoreSight support provides integrated debug visibility, while the 485-CSPBGA package supports dense board-level integration for industrial, communications, embedded control, and signal-processing systems.

The device belongs to the Zynq-7000 product family, whose architecture unifies a dual-core Arm Cortex-A9 processing system with 7 Series FPGA logic. The XC7Z015 implementation offers 74K logic cells, placing it above smaller Zynq configurations in fabric capacity while retaining a processor-centric SoC architecture. The '-3' ordering code identifies the selected device speed grade, while 'E' identifies the associated product grade; the exact commercial and temperature details should be confirmed in the ordering guide before release.

Typical applications include industrial control systems, embedded vision, communications infrastructure, test equipment, and edge-processing platforms. In each case, the Cortex-A9 side can manage protocols, control flow, and applications, while FPGA logic can accelerate parallel algorithms or implement deterministic interfaces. The same partitioning model can also combine a real-time supervisory processor with hardware blocks for filtering, data movement, or protocol termination.

Board design should begin with the AMD Zynq-7000 package pinout files and the manufacturer power-supply, decoupling, and thermal guidance. The 19 x 19 mm BGA requires careful escape routing and inspection, and all three processor and I/O supply domains must be sequenced and decoupled as specified. Confirm design-tool support, memory-device compatibility, security configuration, and pin multiplexing in Vivado before schematic and layout sign-off.

Alternatif penggantian untuk XC7Z015-3CLG485E — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

XC7Z015-2CLG485E

✅ Drop-In
AMD
📦 485-CSPBGA (19 x 19 mm)
Zynq-7000 SoC (FPGA SoC, programmable logic + application processor) · Dual ARM Cortex-A9 MPCore with CoreSight debug · Artix-7 class, 74K logic cells · 766 MHz · -2 · E (extended commercial grade) · 485-CSPBGA (CLG485), 19 x 19 mm, surface mount · 485

Kontak untuk harga

Lihat Datasheet →

XC7Z015-2CLG485I

✅ Drop-In
AMD
📦 485-CSPBGA (19 x 19 mm)
Zynq-7000 SoC with FPGA logic and dual-core Arm Cortex-A9 processor · Dual-core Arm Cortex-A9 MPCore · 32-bit RISC · 766 MHz · 74K logic cells · CoreSight · Artix-7 FPGA · Zynq-7000

Kontak untuk harga

Lihat Datasheet →

XC7Z015-1CLG485I

✅ Drop-In
AMD
📦 485-CSPBGA (19 x 19 mm)
Zynq-7000 Artix-7 FPGA system on chip · Dual ARM Cortex-A9 MPCore · 667 MHz · 74K logic cells · CoreSight · 485-CSPBGA, 19 mm x 19 mm · 485 balls · -1 speed grade

Kontak untuk harga

Lihat Datasheet →

XC7Z015-1CLG485C

✅ Drop-In
AMD
📦 485-CSPBGA (19 x 19 mm)
Zynq-7000 adaptive system-on-chip with integrated FPGA · Dual-core Arm Cortex-A9 MPCore · 667 MHz · Artix-7 · 74K logic cells · 150 I/O · 130 PS I/O · CoreSight

Kontak untuk harga

Lihat Datasheet →

XC7Z015-L1CLG485I

✅ Drop-In
📦 485-CSPBGA (19 x 19 mm)
Same XC7Z015 CLG485 package; L1 ordering code replaces the -3 speed-grade code, so processor performance and grade must be revalidated

📋 Alternatif referensi (tidak dalam katalog)

XC7Z015-3CLG485E Rating Maksimal & Karakteristik Listrik

Device Type Zynq-7000 ARM Cortex-A9 system on chip with Artix-7 FPGA
Processor Cores 2 Arm Cortex-A9 MPCore cores
Processor Clock 866 MHz
FPGA Logic Cells 74K logic cells
DSP Resources 160 DSP slices
Processor Architecture 32-bit RISC
Debug Support CoreSight
Programmable Logic Artix-7 FPGA fabric
Supply Rails 1.5 V, 2 V, and 2.5 V
Paket 485-CSPBGA, 19 x 19 mm
Package Pin Count 485 pins
Technology 28 nm
Status Lingkungan Hidup Active
Product Family Zynq-7000
Series Artix-7 FPGA with Cortex-A9 processor

XC7Z015-3CLG485E 485 pins Diamant Konfigurasi Panduan

Konfigurasi pin untuk XC7Z015-3CLG485E (485 pins pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 485 pins untuk XC7Z015-3CLG485E

Tidak ada data diatribut pin yang tersedia untuk XC7Z015-3CLG485E.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

XC7Z015-3CLG485E cocok untuk 6 aplikasis: Industrial Automation Controllers, Machine Vision and Edge Processing, Communications and Network Equipment, Test and Measurement Instruments, Embedded Control and HMI Platforms, Aerospace Ground Support Equipment.

🏭

Industrial Automation Controllers

The XC7Z015-3CLG485E fits industrial automation controllers that need a high-level operating system for sequencing and communications alongside deterministic hardware logic. Its dual Arm Cortex-A9 cores at 866 MHz can execute control software, diagnostics, and fieldbus tasks, while the 74K logic-cell Artix-7 fabric can implement timing-critical acquisition, pulse generation, or motor-control interfaces. The 160 DSP resources also allow selected signal-processing blocks to move from the processor into parallel hardware. For production use, confirm the required industrial temperature and product-grade suffix, then validate power sequencing, clocking, and thermal performance across the expected ambient range.

📺

Machine Vision and Edge Processing

The XC7Z015-3CLG485E can divide machine-vision workloads between its Arm Cortex-A9 processing system and its Artix-7 FPGA fabric. The processors are suited to camera control, image transport, networking, and inference orchestration, while the 74K logic cells and 160 DSP slices can accelerate pixel formatting, filtering, thresholding, or frame-buffer operations. This hardware-software partitioning reduces external data movement compared with a processor-only implementation. The design must account for DDR memory bandwidth, external image-sensor interfaces, FPGA clock domains, and deterministic DDR timing before selecting the -3 grade over a lower-speed XC7Z015 variant.

🌐

Communications and Network Equipment

The XC7Z015-3CLG485E suits communications equipment requiring network software and high-throughput programmable logic in one device. Its dual 866 MHz Arm Cortex-A9 cores can handle protocol state, management, and control-plane tasks, while the FPGA fabric can implement packet classification, traffic shaping, serialization, or custom physical-layer functions. The 485-CSPBGA package provides dense integration for compact line-card and edge-network designs. Engineering teams should use the manufacturer pinout and memory-interface guidance to plan DDR connections, and should validate transceiver characteristics and timing margins independently of the processor speed grade.

🔧

Test and Measurement Instruments

The XC7Z015-3CLG485E is useful in programmable test and measurement equipment because it combines software sequencing with FPGA-based signal acquisition and generation. The Arm Cortex-A9 side can manage instrument control, analysis software, data storage, and user interfaces, while the 74K logic cells can implement parallel channels, counters, trigger logic, and digital pattern generation. The 160 DSP resources can accelerate selected filtering operations. A practical instrument design should define clocking, ADC and DAC interfaces, memory bandwidth, and FPGA timing before release, while using CoreSight for processor-level debug during bring-up.

🧩

Embedded Control and HMI Platforms

The XC7Z015-3CLG485E supports embedded human-machine interface platforms that combine responsive graphical control with low-latency hardware actions. The dual Arm Cortex-A9 processors at 866 MHz can run application software, networking, and user-interface tasks, while FPGA logic can handle display timing, touch capture, encoder inputs, or safety-related monitoring with predictable latency. Combining these functions in the 485-CSPBGA package reduces board area and external component count. Designers should establish the processor-to-FPGA AXI interface, DDR topology, and external peripheral ownership before schematic release to prevent resource contention during software execution.

✈️

Aerospace Ground Support Equipment

The XC7Z015-3CLG485E can be evaluated for aerospace ground-support and test systems where parallel logic acquisition must coexist with software-controlled diagnostics. The processor subsystem provides control and logging capability, while the FPGA fabric can implement deterministic interface sequencing, data capture, or redundant signal checks. Its 485-CSPBGA package supports compact integration into ground-based instrumentation. The device is not automatically qualified for airborne deployment; engineers must confirm ordering grade, environmental limits, radiation requirements, and applicable certification evidence. For ground equipment, thermal analysis should include processor, FPGA fabric, and memory activity under sustained workloads.

What are the key specifications of XC7Z015-3CLG485E that engineers should know?
The XC7Z015-3CLG485E integrates two Arm Cortex-A9 MPCore processors running at 866 MHz with an Artix-7 FPGA fabric containing 74K logic cells and 160 DSP slices. According to the AMD/Xilinx manufacturer datasheet and product documentation, it uses a 485-CSPBGA package measuring 19 x 19 mm and includes CoreSight debug support. Its supply rails include 1.5 V, 2 V, and 2.5 V, making it suitable for heterogeneous embedded systems that require both software processing and programmable hardware.
What is XC7Z015-3CLG485E and what does the Zynq-7000 architecture provide?
The XC7Z015-3CLG485E is a Zynq-7000 heterogeneous system on chip that combines a dual-core Arm Cortex-A9 processor with Artix-7 programmable logic. According to the AMD/Xilinx manufacturer datasheet, the processor operates at 866 MHz and the fabric provides 74K logic cells with 160 DSP slices. This architecture lets software handle protocols and control tasks while FPGA logic accelerates parallel data processing, custom interfaces, and deterministic operations.
Where can I download the XC7Z015-3CLG485E datasheet PDF?
The XC7Z015-3CLG485E datasheet PDF is available through the AMD/Xilinx document links listed on this page, including the manufacturer-linked copy hosted with the LCSC technical document. The manufacturer package pinout resources also provide the authoritative pin-location files in TXT and CSV formats. Use the AMD/Xilinx datasheet for electrical limits, ordering information, and device details, and the package-pinout files when assigning the 485-BGA lands on a PCB.
Where can I find the XC7Z015-3CLG485E pinout and package information?
The XC7Z015-3CLG485E pinout is defined by the AMD Zynq-7000 package pinout files and the XC7Z012-CLG485 and XC7Z015-CLG485 package placement diagram. According to AMD's package documentation, those resources include machine-readable pin files for PCB and design-tool integration. The device uses a 485-CSPBGA package measuring 19 x 19 mm, so a complete land pattern should be imported into the PCB tool rather than reconstructed from a generic BGA drawing.
What can replace XC7Z015-3CLG485E on the same PCB?
The XC7Z015-2CLG485E and XC7Z015-2CLG485I are the closest same-package alternatives because they retain the XC7Z015 CLG485 configuration while changing the speed-grade code. According to AMD's Zynq-7000 package documentation, XC7Z015 devices share the CLG485 package placement arrangement. Verify the required processor clock, temperature grade, power constraints, and design-tool timing targets before replacing the '-3CLG485E' device with a lower speed grade.
Is XC7Z015-3CLG485E the same as XC7Z015-2CLG485E?
No, the XC7Z015-3CLG485E and XC7Z015-2CLG485E are related CLG485 devices rather than identical speed grades. The target operates at 866 MHz, while the '-2' ordering code denotes a different performance grade. According to AMD's Zynq-7000 package documentation, both use the XC7Z015 CLG485 placement, but a lower-speed replacement can change processing performance and timing closure. Confirm application timing requirements and the appropriate temperature-grade suffix before substitution.
What is the best AMD equivalent for XC7Z015-3CLG485E?
The best same-footprint AMD alternative depends on which device attribute may change. The XC7Z015-2CLG485E retains the exact CLG485 package and base family, while the XC7Z015-2CLG485I and XC7Z015-1CLG485I offer industrial-grade suffix options with lower speed-grade codes. According to AMD package-placement documentation, these devices share the XC7Z015 CLG485 arrangement. None should be selected solely by suffix; verify processor frequency, temperature range, I/O limits, and timing closure.
Is there a cross-brand drop-in replacement for XC7Z015-3CLG485E?
No verified cross-brand drop-in replacement is established for the XC7Z015-3CLG485E. The AMD/Xilinx XC7Z015 CLG485 is a highly integrated FPGA SoC whose processor, programmable fabric, memory interfaces, I/O, package pins, and design-tool support are coupled. A different manufacturer's FPGA SoC with similar headline processor or logic specifications would not automatically be pin-to-pin compatible. Migration should therefore be treated as a redesign requiring package, pin, software, and toolchain validation.
When should I choose XC7Z015-3CLG485E over a lower-speed XC7Z015 variant?
Choose the XC7Z015-3CLG485E when the design requires its 866 MHz processor operating point and has been timing-closed against that grade. The XC7Z015-2CLG485E or XC7Z015-1CLG485I may be preferable when lower processing performance is acceptable and the board can tolerate the changed timing and power characteristics. According to the manufacturer ordering information, the speed-grade code changes performance class, so selection should follow processor and logic timing requirements rather than package identity alone.
Is XC7Z015-3CLG485E suitable for industrial control and embedded automation?
The XC7Z015-3CLG485E is suitable for industrial control when the selected suffix satisfies the required temperature and product-grade criteria. It combines two Arm Cortex-A9 cores at 866 MHz with 74K logic cells and 160 DSP slices, allowing supervisory software and deterministic hardware functions to share one device. According to the manufacturer documentation, the 1.5 V, 2 V, and 2.5 V rails and CoreSight support suit embedded control development, but production selection still requires confirmation of environmental and lifecycle requirements.
How much FPGA logic and DSP capacity does XC7Z015-3CLG485E provide?
The XC7Z015-3CLG485E provides 74K FPGA logic cells and 160 DSP resources alongside its dual-core Arm Cortex-A9 processor. According to the AMD/Xilinx manufacturer datasheet, this fabric is based on the Artix-7 architecture within the Zynq-7000 family. The programmable resources can support parallel filtering, fixed-function accelerators, custom data paths, and hardware-assisted control, while the processor side manages operating systems, networking, and application-level control.
Where can I buy XC7Z015-3CLG485E and check current lead time?
Use the Request a Quote form on this page to ask about XC7Z015-3CLG485E availability, lead time, order quantity, and delivery options. The manufacturer and distributor listings identify the device as an active Zynq-7000 SoC, but current inventory and scheduling can change by lot, region, and order size. Submit the exact MPN, including the '-3CLG485E' suffix, so the quotation is tied to the correct speed grade and package configuration.
What is the price of XC7Z015-3CLG485E?
The current XC7Z015-3CLG485E quotation is obtained through the Request a Quote form on this page. Because configured commercial pricing depends on order quantity, availability, and supply conditions, a static unit price should not be assumed. Include the full MPN, target quantity, delivery location, and required production dates when requesting the quote to obtain an exact and current commercial response.
Is XC7Z015-3CLG485E in stock and what is its lead time?
Current stock and lead time for the exact XC7Z015-3CLG485E should be confirmed through the Request a Quote form on this page. Manufacturer and distributor catalog records identify the part as active, but listing status does not guarantee a specific quantity at every point in time. Submit the required quantity, ship-to region, target date, and whether multiple production lots are acceptable to obtain a current availability commitment.
Can one XC7Z015-2CLG485E board replace an XC7Z015-3CLG485E design?
A board can generally use the same CLG485 footprint for an XC7Z015-2CLG485E, but functional equivalence requires timing and thermal revalidation. According to AMD's package-placement documentation, the XC7Z015 CLG485 devices share the package arrangement, while the speed-grade code changes processor performance. Review processor timing constraints, Vivado timing closure, power behavior, and product-grade requirements. A PCB-only replacement is appropriate only after the original design's critical paths have been signed off against the lower grade.

Data referensi engineering untuk XC7Z015-3CLG485E — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the XC7Z015-3CLG485E when the design benefits from its 866 MHz processor operating point, dual Arm Cortex-A9 cores, 74K logic cells, and 160 DSP slices while using the 485-CSPBGA footprint. It is particularly suitable for embedded control, communications, industrial automation, and edge-processing systems that divide work between software and FPGA logic. Select XC7Z015-2CLG485E or XC7Z015-2CLG485I when the same package is required but lower processor performance is acceptable; use the I ordering option only when its industrial grade matches the deployment environment. XC7Z015-1CLG485I and XC7Z015-1CLG485C require additional timing and thermal revalidation because of their lower speed-grade codes. XC7Z015-L1CLG485I may suit specific ordering configurations but needs careful review of its performance and grade semantics. No verified cross-brand drop-in substitute is available, so migration to another FPGA SoC requires a full PCB, firmware, toolchain, and timing redesign.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini XC7Z015-2CLG485E XC7Z015-2CLG485I XC7Z015-1CLG485I XC7Z015-1CLG485C XC7Z015-L1CLG485I
Brand AMD AMD AMD AMD AMD AMD
Package 485-CSPBGA (19 x 19 mm) 485-CSPBGA (19 x 19 mm) 485-CSPBGA (19 x 19 mm) 485-CSPBGA (19 x 19 mm) 485-CSPBGA (19 x 19 mm) 485-CSPBGA (19 x 19 mm)

Diferensiator Kunci

  • Higher processor speed grade within the XC7Z015 CLG485 family (vsXC7Z015-2CLG485E)
  • Complete processor and programmable-logic integration (vsXC7Z015-1CLG485C)
  • Substantial parallel DSP capacity alongside two processor cores (vsXC7Z015-1CLG485I)
  • Industrial-ordering option available without changing the package (vsXC7Z015-1CLG485C)

Catatan Desain

Use the AMD Zynq-7000 package pinout files to construct the 485-CSPBGA footprint and escape-routing strategy. The package measures 19 x 19 mm and contains 485 pins, so use the manufacturer-defined land pattern rather than adapting a generic 484-ball or 256-ball BGA footprint. Preserve unobstructed access for X-ray or optical inspection, particularly beneath the device, and follow the package drawing for solder-mask and paste-aperture definitions.

Plan the 1.5 V, 2 V, and 2.5 V rails as separate domains and follow the manufacturer power-supply sequencing and decoupling requirements. Place the required bulk and high-frequency capacitors close to their associated supply and ground balls, with low-impedance planes connecting the power-distribution network. Validate startup, current transients, voltage tolerances, and simultaneous processor-plus-FPGA activity in the final power tree rather than relying on nominal rail values alone.

Estimated thermal planning should begin with the processor operating at 866 MHz and the FPGA fabric under the design's peak utilization; the final junction temperature depends on package construction, board copper, airflow, ambient temperature, and the selected speed grade. Use the manufacturer thermal data and Vivado power estimates to identify hot operating modes, then provide copper spreading beneath the BGA and verify the assembled board with thermal testing. Processor and fabric utilization can change power and temperature substantially.

Do not treat another XC7Z015 CLG485 suffix as an unconditional substitute. Speed-grade and ordering-grade changes can alter processor performance, temperature qualification, timing margin, and power behavior even when the PCB footprint is unchanged. After changing to XC7Z015-2CLG485E, XC7Z015-2CLG485I, XC7Z015-1CLG485I, XC7Z015-1CLG485C, or XC7Z015-L1CLG485I, rerun synthesis, implementation timing analysis, static timing closure, and resource-based power estimation.

Keep high-speed memory, clock, serial, and dedicated I/O routing over continuous reference planes, and observe the AMD guidance for each interface's length, matching, and return-path continuity. Separate noisy or switching circuitry from Cortex-A9 and CoreSight debug paths where practical. Since processor, DDR, and FPGA domains can operate concurrently, use synchronized clocks and explicit reset-release sequencing to prevent interface logic from starting before its supporting supplies are stable.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Compliance status and ordering-grade limits must be confirmed in the current AMD/Xilinx product documentation and applicable material declarations.

Pencarian Terkait

xc7z015 2clg485i xc7z015 1clg485i xc7z015 1clg485c xc7z015 2clg485e xc7z015 l1clg485i xc7z015 datasheet xc7z015 2clg485i datasheet xc7z015 clg485 zynq xc7z015 xilinx xc7z015 XC7Z015-3CLG485E pinout XC7Z015-3CLG485E replacement XC7Z015-3CLG485E price XC7Z015-3CLG485E application circuit

Komponen dan Istilah Terkait

AMD Xilinx XC7Z015-3CLG485E XC7Z015-2CLG485E XC7Z015-2CLG485I XC7Z015-1CLG485I XC7Z015-1CLG485C XC7Z015-L1CLG485I Zynq-7000 Artix-7 FPGA system on chip SoC heterogeneous processing architecture Arm Cortex-A9 MPCore CoreSight 485-CSPBGA 19 x 19 mm BGA package programmable logic FPGA logic cells DSP slices industrial automation embedded control communications equipment
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ