XC7Z015-3CLG485E - Dual Cortex-A9 Zynq-7000 SoC | AMD
MPN: XC7Z015-3CLG485E ✓ Hoạt độngXC7Z015-3CLG485E Tóm tắt
A Zynq-7000 SoC is a heterogeneous programmable system-on-chip. Its Arm Cortex-A9 processing system executes operating-system-level software, while the FPGA fabric supports parallel hardware acceleration, custom interfaces, and signal processing. The combination places software control and programmable logic on one device, reducing interconnects and allowing designers to partition workloads between general-purpose processors and dedicated hardware logic.
Key features include two Arm Cortex-A9 cores operating at 866 MHz, 74K FPGA logic cells, and 160 DSP resources. The processor subsystem uses a 32-bit RISC architecture and supports supply rails identified as 1.5 V, 2 V, and 2.5 V. CoreSight support provides integrated debug visibility, while the 485-CSPBGA package supports dense board-level integration for industrial, communications, embedded control, and signal-processing systems.
The device belongs to the Zynq-7000 product family, whose architecture unifies a dual-core Arm Cortex-A9 processing system with 7 Series FPGA logic. The XC7Z015 implementation offers 74K logic cells, placing it above smaller Zynq configurations in fabric capacity while retaining a processor-centric SoC architecture. The '-3' ordering code identifies the selected device speed grade, while 'E' identifies the associated product grade; the exact commercial and temperature details should be confirmed in the ordering guide before release.
Typical applications include industrial control systems, embedded vision, communications infrastructure, test equipment, and edge-processing platforms. In each case, the Cortex-A9 side can manage protocols, control flow, and applications, while FPGA logic can accelerate parallel algorithms or implement deterministic interfaces. The same partitioning model can also combine a real-time supervisory processor with hardware blocks for filtering, data movement, or protocol termination.
Board design should begin with the AMD Zynq-7000 package pinout files and the manufacturer power-supply, decoupling, and thermal guidance. The 19 x 19 mm BGA requires careful escape routing and inspection, and all three processor and I/O supply domains must be sequenced and decoupled as specified. Confirm design-tool support, memory-device compatibility, security configuration, and pin multiplexing in Vivado before schematic and layout sign-off.
Bộ thay thế dễ dàng lắp đặt cho XC7Z015-3CLG485E — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
XC7Z015-2CLG485E
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7Z015-2CLG485I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7Z015-1CLG485I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7Z015-1CLG485C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7Z015-L1CLG485I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC7Z015-3CLG485E Tỷ lệ tối đa & tính chất điện
| Device Type | Zynq-7000 ARM Cortex-A9 system on chip with Artix-7 FPGA |
| Processor Cores | 2 Arm Cortex-A9 MPCore cores |
| Processor Clock | 866 MHz |
| FPGA Logic Cells | 74K logic cells |
| DSP Resources | 160 DSP slices |
| Processor Architecture | 32-bit RISC |
| Debug Support | CoreSight |
| Programmable Logic | Artix-7 FPGA fabric |
| Supply Rails | 1.5 V, 2 V, and 2.5 V |
| Hộp | 485-CSPBGA, 19 x 19 mm |
| Package Pin Count | 485 pins |
| Technology | 28 nm |
| Trạng thái vòng đời | Active |
| Product Family | Zynq-7000 |
| Series | Artix-7 FPGA with Cortex-A9 processor |
Hướng dẫn cấu hình chân XC7Z015-3CLG485E 485 pins
Cấu hình chân cho XC7Z015-3CLG485E (485 pins gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC7Z015-3CLG485E.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC7Z015-3CLG485E phù hợp cho 6 Áp dụngs: Industrial Automation Controllers, Machine Vision and Edge Processing, Communications and Network Equipment, Test and Measurement Instruments, Embedded Control and HMI Platforms, Aerospace Ground Support Equipment.
Industrial Automation Controllers
The XC7Z015-3CLG485E fits industrial automation controllers that need a high-level operating system for sequencing and communications alongside deterministic hardware logic. Its dual Arm Cortex-A9 cores at 866 MHz can execute control software, diagnostics, and fieldbus tasks, while the 74K logic-cell Artix-7 fabric can implement timing-critical acquisition, pulse generation, or motor-control interfaces. The 160 DSP resources also allow selected signal-processing blocks to move from the processor into parallel hardware. For production use, confirm the required industrial temperature and product-grade suffix, then validate power sequencing, clocking, and thermal performance across the expected ambient range.
Được đề xuất
Machine Vision and Edge Processing
The XC7Z015-3CLG485E can divide machine-vision workloads between its Arm Cortex-A9 processing system and its Artix-7 FPGA fabric. The processors are suited to camera control, image transport, networking, and inference orchestration, while the 74K logic cells and 160 DSP slices can accelerate pixel formatting, filtering, thresholding, or frame-buffer operations. This hardware-software partitioning reduces external data movement compared with a processor-only implementation. The design must account for DDR memory bandwidth, external image-sensor interfaces, FPGA clock domains, and deterministic DDR timing before selecting the -3 grade over a lower-speed XC7Z015 variant.
Được đề xuất
Communications and Network Equipment
The XC7Z015-3CLG485E suits communications equipment requiring network software and high-throughput programmable logic in one device. Its dual 866 MHz Arm Cortex-A9 cores can handle protocol state, management, and control-plane tasks, while the FPGA fabric can implement packet classification, traffic shaping, serialization, or custom physical-layer functions. The 485-CSPBGA package provides dense integration for compact line-card and edge-network designs. Engineering teams should use the manufacturer pinout and memory-interface guidance to plan DDR connections, and should validate transceiver characteristics and timing margins independently of the processor speed grade.
Được đề xuất
Test and Measurement Instruments
The XC7Z015-3CLG485E is useful in programmable test and measurement equipment because it combines software sequencing with FPGA-based signal acquisition and generation. The Arm Cortex-A9 side can manage instrument control, analysis software, data storage, and user interfaces, while the 74K logic cells can implement parallel channels, counters, trigger logic, and digital pattern generation. The 160 DSP resources can accelerate selected filtering operations. A practical instrument design should define clocking, ADC and DAC interfaces, memory bandwidth, and FPGA timing before release, while using CoreSight for processor-level debug during bring-up.
Được đề xuất
Embedded Control and HMI Platforms
The XC7Z015-3CLG485E supports embedded human-machine interface platforms that combine responsive graphical control with low-latency hardware actions. The dual Arm Cortex-A9 processors at 866 MHz can run application software, networking, and user-interface tasks, while FPGA logic can handle display timing, touch capture, encoder inputs, or safety-related monitoring with predictable latency. Combining these functions in the 485-CSPBGA package reduces board area and external component count. Designers should establish the processor-to-FPGA AXI interface, DDR topology, and external peripheral ownership before schematic release to prevent resource contention during software execution.
Được đề xuất
Aerospace Ground Support Equipment
The XC7Z015-3CLG485E can be evaluated for aerospace ground-support and test systems where parallel logic acquisition must coexist with software-controlled diagnostics. The processor subsystem provides control and logging capability, while the FPGA fabric can implement deterministic interface sequencing, data capture, or redundant signal checks. Its 485-CSPBGA package supports compact integration into ground-based instrumentation. The device is not automatically qualified for airborne deployment; engineers must confirm ordering grade, environmental limits, radiation requirements, and applicable certification evidence. For ground equipment, thermal analysis should include processor, FPGA fabric, and memory activity under sustained workloads.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC7Z015-3CLG485E — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC7Z015-2CLG485E | XC7Z015-2CLG485I | XC7Z015-1CLG485I | XC7Z015-1CLG485C | XC7Z015-L1CLG485I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 485-CSPBGA (19 x 19 mm) | 485-CSPBGA (19 x 19 mm) | 485-CSPBGA (19 x 19 mm) | 485-CSPBGA (19 x 19 mm) | 485-CSPBGA (19 x 19 mm) | 485-CSPBGA (19 x 19 mm) |
Bảo phân biệt quan trọng
- Higher processor speed grade within the XC7Z015 CLG485 family (vsXC7Z015-2CLG485E)
- Complete processor and programmable-logic integration (vsXC7Z015-1CLG485C)
- Substantial parallel DSP capacity alongside two processor cores (vsXC7Z015-1CLG485I)
- Industrial-ordering option available without changing the package (vsXC7Z015-1CLG485C)
Ghi chú thiết kế
Use the AMD Zynq-7000 package pinout files to construct the 485-CSPBGA footprint and escape-routing strategy. The package measures 19 x 19 mm and contains 485 pins, so use the manufacturer-defined land pattern rather than adapting a generic 484-ball or 256-ball BGA footprint. Preserve unobstructed access for X-ray or optical inspection, particularly beneath the device, and follow the package drawing for solder-mask and paste-aperture definitions.
Plan the 1.5 V, 2 V, and 2.5 V rails as separate domains and follow the manufacturer power-supply sequencing and decoupling requirements. Place the required bulk and high-frequency capacitors close to their associated supply and ground balls, with low-impedance planes connecting the power-distribution network. Validate startup, current transients, voltage tolerances, and simultaneous processor-plus-FPGA activity in the final power tree rather than relying on nominal rail values alone.
Estimated thermal planning should begin with the processor operating at 866 MHz and the FPGA fabric under the design's peak utilization; the final junction temperature depends on package construction, board copper, airflow, ambient temperature, and the selected speed grade. Use the manufacturer thermal data and Vivado power estimates to identify hot operating modes, then provide copper spreading beneath the BGA and verify the assembled board with thermal testing. Processor and fabric utilization can change power and temperature substantially.
Do not treat another XC7Z015 CLG485 suffix as an unconditional substitute. Speed-grade and ordering-grade changes can alter processor performance, temperature qualification, timing margin, and power behavior even when the PCB footprint is unchanged. After changing to XC7Z015-2CLG485E, XC7Z015-2CLG485I, XC7Z015-1CLG485I, XC7Z015-1CLG485C, or XC7Z015-L1CLG485I, rerun synthesis, implementation timing analysis, static timing closure, and resource-based power estimation.
Keep high-speed memory, clock, serial, and dedicated I/O routing over continuous reference planes, and observe the AMD guidance for each interface's length, matching, and return-path continuity. Separate noisy or switching circuitry from Cortex-A9 and CoreSight debug paths where practical. Since processor, DDR, and FPGA domains can operate concurrently, use synchronized clocks and explicit reset-release sequencing to prevent interface logic from starting before its supporting supplies are stable.
Thông tin tuân thủ
Compliance status and ordering-grade limits must be confirmed in the current AMD/Xilinx product documentation and applicable material declarations.