Microchip MTCH3380PとMTCH3240P、家電HMI向けに12ADC並列センシングを追加

Microchipは、ボタン、スライダー、ホイール向けにオンチップ並列ADCを備えた2つのターンキータッチコントローラを発売した。10k個での価格は0.80ドルから。

公開日 更新日 4 分で読了 ✓ AI対応 共有

TL;DR — 3つの文

  • Microchip released the MTCH3380P and MTCH3240P as its first turnkey touch controllers with parallel sensing for buttons, sliders, and wheels. (S1)
  • Each part integrates 12 on-chip ADCs running in parallel, supporting up to 64 sensors (MTCH3380P) or 32 sensors (MTCH3240P) in mutual-capacitance mode. (S1)
  • Both devices target IEC/UL 60730 Class B functional safety and 105 °C operation, aimed at ovens, cooktops, EV chargers, parking meters, and kiosks. (S1)

引用元: key_takeaways (実フィールド、最大3件)。事実と分析は別々にラベル付けされています。

Microchip MTCH3380PとMTCH3240P、家電HMI向けに12ADC並列センシングを追加Editorial cover for a component sourcing brief. Chip motif; headline "Microchip MTCH3380PとMTCH3240P、家電HMI向けに12ADC並列センシング". No reported key numbers on this brief, so no number strip is drawn. 1 cited source. A one-time entrance animation stops under reduced motion.MicrochipMTCH3380PとMTCH3240P、家電HMI向けに12ADC並列センシングXAIPART
Cover image generated from data already shown on this page: the category motif, the headline, and reported key numbers. No decorative illustration; no third-party image.

AIの回答から来ましたか — これが検証可能なオリジナルです

AIの要約は、主張の根拠を落としている可能性があります。元の予測、影響を受ける部品、すべての引用はこのページにあり、それぞれ出典まで追跡できます。

XAIPART予測

このブリーフには反証可能な予測が含まれています。

影響を受ける部品

この記事に一致するカタログ項目はありません。推測して一致させるのではなく、何も表示しません。

Reported by Embedded on 2026-10-09. Summarized and analyzed by XAIPART Editorial.

What happened

Microchip Technology Inc. has launched its first turnkey touch controllers with parallel sensing for buttons, sliders, and wheels, targeting appliance and outdoor/industrial human-machine interfaces. S1 The two parts extend the company's capacitive-touch family and are intended to let equipment makers replace displays with illuminated capacitive-touch controls at lower cost.

The new parts are the MTCH3380P and MTCH3240P. S1 Microchip positions them for interfaces that previously needed large sensor counts, which the source says can drive up acquisition time and reduce signal-to-noise ratio (SNR). The controllers address this through parallel acquisition across on-chip ADCs, allowing many buttons, sliders, and wheels to maintain response time and SNR in noisy environments. S1

Each device carries 12 on-chip ADCs operating in parallel. S1 The MTCH3380P supports up to 38 sensors in self-capacitance mode and 64 sensors in mutual-capacitance mode; the MTCH3240P supports up to 24 in self-cap mode and 32 in mutual-cap mode. S1 The devices are specified for IEC/UL 60730 Class B functional safety and operation up to 105 °C, with listed use cases including ovens, cooktops, refrigerators, washing machines, EV chargers, parking meters, and kiosks. S1 Design support covers the mTouch Studio development environment and evaluation hardware with host drivers for Linux and Zephyr. S1

Key numbers
MetricReported valueSource
On-chip ADCs per device12 (parallel)[S1]
MTCH3380P sensor count, self-capUp to 38[S1]
MTCH3380P sensor count, mutual-capUp to 64[S1]
MTCH3240P sensor count, self-capUp to 24[S1]
MTCH3240P sensor count, mutual-capUp to 32[S1]
Operating temperatureUp to 105 °C[S1]
Functional safetyIEC/UL 60730 Class B[S1]
MTCH3380P price (10,000-unit qty)From $1.06 each[S1]
MTCH3240P price (10,000-unit qty)From $0.80 each[S1]

Background timeline

  1. - Microchip launches the MTCH3380P and MTCH3240P turnkey touch controllers with 12 parallel on-chip ADCs; the source did not disclose prior part generations or release dates in the capacitive-turnkey MCU line. [S1]
  2. No prior milestones disclosed by the source.

XAIPART take

Technical impact

Twelve ADCs running in parallel is the headline architecture change: it lets designers scan a full slider, wheel, or button matrix in roughly one conversion cycle, which preserves SNR where traditional sequential-scan parts would need either longer acquisition windows or extra external analog front-end. XAIPART analysis

Self-capacitance vs mutual-capacitance headroom matters for through-glass and glove use cases called out in the release; designers should benchmark wet-condition and glove performance in mutual-cap mode before locking the BOM, because mutual-cap traditionally trades raw sensitivity for noise rejection. XAIPART analysis

Market impact

Both parts are stocked and orderable today at $0.80-$1.06 in 10k quantities, which removes a typical sample-window delay for appliance and EV-charger programs sourcing through distribution. XAIPART analysis

The IEC/UL 60730 Class B claim and 105 °C rating position the MTCH3380P and MTCH3240P against established appliance-touch incumbents in white goods and outdoor HMI; the lower MTCH3240P price point specifically targets cost-down replacements where display stacks can be deleted. XAIPART analysis

Action

Procurement teams building Class-B BOMs for ovens, cooktops, or EV chargers should pull MTCH3380P samples and confirm IEC/UL 60730 certificate numbers and the 105 °C characterization reports directly with Microchip before derisking a socket swap. XAIPART analysis

Design engineers migrating off a sequential-scan touch controller should evaluate the mTouch Studio flow plus the published Linux and Zephyr host drivers on actual stack-up glass or acrylic, including wet and glove matrices, before committing the PCB layout. XAIPART analysis

XAIPART Forecast

XAIPART expects the MTCH3240P quoted $0.80 price in 10k-unit quantities to remain within ±5% at authorized distributors through Q2 2027; if published 10k-unit pricing on the MTCH3240P falls below $0.76 by 2027-06-30, this forecast is wrong. XAIPART analysis

Facts are as reported by the cited source. The design-in, sourcing and forward-looking statements above are XAIPART's analysis, not the source's claims. Uncertainty: IEC/UL 60730 certificate numbers, full datasheet SNR figures in dB, and ADC scan-time specifications were not disclosed by the source.

Corrections: none at publication. This brief will be updated with a timestamp if the source corrects its report.

代替品とライフサイクル

登録済みの代替品 — カタログ範囲であり、市場ランキングではありません
部品関係ライフサイクル根拠
— 登録済みの代替品はありません データ不足 — 前身ラベルを表示するには match_type が必要です

「前身」および「代替」のラベルは、記録された一致タイプ、ライフサイクルステータス、またはソーステキストに基づく場合にのみ付与されます。一致が記録されていない場合、ラベルは表示されません。当社の掲載情報は市場の基準ではありません。

注視すべき点

反証可能な予測 — しきい値、期間、現在のステータス。反証された予測は表示されたままです。
主張しきい値著者:ステータス
XAIPART expects the MTCH3240P quoted $0.80 price in 10k-unit quantities to remain within ±5% at authorized distributors through Q2 2027 published 10k-unit pricing on the MTCH3240P falls below $0.76 by 2027-06-30 Pending

誤りだった予測は表示されたままマークされます。削除することはありません。

影響を受ける部品

カタログに一致するものはありません。 この記事は、現在XAIPARTに掲載されているどの部品にも該当しません。一致を推測することはなく、プレースホルダーのリストも表示しません。

次元別のコスト圧力

Source: FRED · Generated · reference output z and composite are algorithm outputs, not a fetch snapshot

Cost pressure by dimension — composite stateDiverging bars for three dimensions around a zero midpoint. Input Cost has no reading; Supply Demand z -1.4711, notable; Fx Energy z 0.2546, neutral. Composite index -9.1, band neutral.0Input costno readingSupply/demandz −1.4711 · notable46 dFX & energyz +0.2546 · neutral5 dcomposite −9.1 · neutral−100 · −40 · −15 · 0 · +15 · +40 · +100
Underlying values — copyable for verification.
DimensionFRED series IDUnitLagAs of
Input costPCOPPUSDM, PALUMUSDM, PNICKUSDMUSD/mt52 d
Supply/demandPCU334413334413, IPG3344Sindex(1982=100) / index(2017=100)46 d
FX & energyDEXCHUS, DCOILBRENTEU, DHHNGSPrate / USD/bbl / USD/MMBtu5 d

No free authoritative interface for: gold · silver · rare earth · polysilicon · lithium carbonate · market share — listed rather than approximated.

この記事の制作方法

プロセス証跡 — 取得、ソースの妥当性、モデル、ゲート
このブリーフの監査証跡
Source fetched Embedded · www.embedded.com · 3,051 chars · fetch status success
Source sanity (S1) ok — passed before any model call (no s1_ block recorded)
Model / prompt MiniMax-M3 · prompt Blog Agent - News Summary (v2.8-final) · 6,750 tokens · 30s · run completed
Gate verdict pass · 5/6 applicable checks passed · spec v2.9 · C10 ratio 0.062285 · C10 rounds 0
Time contract 1 <time datetime> values in this brief — 0 violations (+08:00 or date-only)

上記のすべての行はパイプラインによって生成されており、手作業で書かれたものではありません。

編集スコア

決定論的ゲートの結果 — 純粋なPHPで、判定にモデルは関与していません
ゲートスコアの内訳 6 件の該当チェックのうち、 5項目合格: 83 %. No hold items or mandatory failures. Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.7547. 該当するチェックに合格 5 / 6 = 83% · 判定: pass No hold items or mandatory failures Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.7547 公開の可否はゲートが決定します。独立監査スコアは助言にすぎません。
誤りを見つけましたか? 誤りをお知らせください — 訂正は原文と併せて公開され、記録されます。記事を無断で編集することはありません。

コメント

最初のコメントを投稿しましょう。

情報源

  1. Microchip Adds Parallel Sensing to Touch Controllers — https://www.embedded.com/microchip-adds-parallel-sensing-to-touch-controllers/ · rss · 参照日

事実はS1/S2とマークされ、リンクされた出典まで追跡できます。ラベル付けされた箇所は 分析 はXAIPART独自の推論であり、報道された事実とは分けて維持されています。出典リンクは実際に参照され、次の指定は行いません: nofollow — 帰属表示は意図的なものです。