集積回路

サブカテゴリ

📁 ADC/DAC 2518 製品 📁 アンプIC 793 製品 📁 オーディオコーデック 16 製品 📁 オーディオIC 2 製品 📁 クロック＆タイミング 287 製品 📁 DSP 962 製品 📁 データ収集IC 2 製品 📁 デジタルポテンショメータ 4 製品 📁 ディスプレイドライバ＆コントローラ 1 製品 📁 FPGA & CPLD 6666 製品 📁 インターフェースIC 1568 製品 📁 LEDドライバ 1 製品 📁 ロジックIC 305 製品 📁 メモリIC 875 製品 📁 マイクロコントローラ 18688 製品 📁 マイクロプロセッサ 4 製品 📁 モータドライバ 1 製品 📁 その他 1 製品 📁 Sensor and Detector Interfaces 1 製品 📁 専用IC 15 製品 📁 ビデオIC 13 製品

製品 (32725)

S9S08DZ96F2VLH - 40MHz 96KB Flash CAN MCU | NXP
S9S08DZ96F2VLH

S9S08DZ96F2VLH - 40MHz 96KB Flash CAN MCU | NXP

The NXP Semiconductors S9S08DZ96F2VLH is an 8-bit S08D microcontroller with a 40 MHz HCS08 CPU core, 96 KB of flash memory, 6 KB of RAM, 2 KB of EEPROM, embedded CAN, an LCD driver, and a 64-LQFP package. It is designed for automotive and industrial embedded systems where CAN connectivity, deterministic control, and integrated memory reduce external component count. The controller operates from a 3.3 V or 5 V supply according to the retrieved product descriptions, and the bus frequency reaches 40 MHz. A microcontroller is a programmable semiconductor that combines a CPU, memory, and peripherals on one integrated circuit. This S08D device belongs to the 8-bit microcontroller hierarchy, where the CPU processes embedded control tasks and connected peripherals handle communication, timing, data acquisition, and output functions. Its embedded CAN controller makes it suitable for distributed vehicle, industrial, and equipment-control networks, while the LCD driver supports human-interface or display-oriented designs without relying entirely on an external display controller. The main feature set includes 96 KB of flash for firmware, 6 KB of RAM for working data, 2 KB of EEPROM for nonvolatile parameters, embedded CAN, an LCD driver, and a maximum 40 MHz bus frequency. These resources allow the MCU to combine control logic, communication, and persistent configuration in one package. The 64-LQFP package provides 64 external terminals and is suitable for conventional surface-mount PCB assembly. S9S08DZ96F2VLH belongs to the S08D family, identified in the retrieved data as an automotive and industrial-oriented 8-bit family with scalable migration and embedded CAN capability. The architecture is intended to balance real-time control with compact code size and low system complexity. Designers should consult the manufacturer datasheet for exact peripheral availability, electrical limits, clock configuration, and pin multiplexing before finalizing a new design. Typical uses include automotive body and powertrain-adjacent modules, industrial controllers, CAN-connected sensors, equipment interfaces, and compact embedded control products. Because the supplied evidence identifies embedded CAN, LCD driving, flash, RAM, EEPROM, and the 40 MHz bus, these are the strongest application areas for this part. A system requiring additional external memory, different communication protocols, or a different package should be reviewed against the current datasheet. The principal design consideration is package and pin compatibility. S9S08DZ96F2VLH uses a 64-LQFP footprint, so any substitution must preserve the exact pin arrangement, electrical limits, clock behavior, memory map, and peripheral functions. The retrieved data does not provide a verified alternate manufacturer part, so production sourcing should be based on the NXP ordering information and current manufacturer documentation. This product summary consolidates the verified NXP product description, distributor listings, package information, and application-relevant details into an engineering-oriented reference. It also identifies where the available evidence is incomplete, rather than estimating technical values, pricing, or replacement specifications that were not supplied.

見積もり 在庫あり
S9S08DZ96F2VLL - 8-bit MCU, 96KB Flash, 40MHz | NXP
S9S08DZ96F2VLL

S9S08DZ96F2VLL - 8-bit MCU, 96KB Flash, 40MHz | NXP

The NXP Semiconductors S9S08DZ96F2VLL is an 8-bit S08-core microcontroller with 96KB (96K x 8) flash memory, 6KB RAM, and 2KB embedded EEPROM, operating at up to 40MHz (20MHz internal bus) in a 100-pin LQFP (14x14 mm) package. An 8-bit microcontroller is an integrated circuit that combines a processor core, program memory, data memory, and peripherals on a single chip, forming the lowest tier of the microcontroller hierarchy that spans 8-bit MCUs, 16-bit MCUs, and 32-bit MCUs. The S08 core executes the HC08 instruction set with an added BGND instruction, positioning this device as a direct descendant of the widely deployed Freescale HCS08 family for cost-sensitive embedded control. Key features include the 40MHz HCS08 CPU with support for up to 32 interrupt/reset sources, a 24-channel 12-bit ADC with 2.5 us conversion time, an on-chip DMA controller, PWM channels, and embedded nonvolatile EEPROM for parameter storage without external memory. The device integrates a CAN module, distinguishing it within the 8-bit segment, which is uncommon for 8-bit architectures. Technically, the S9S08DZ96F2VLL uses flash program memory with in-circuit programming capability and on-chip emulation/debug, simplifying development without additional debugger silicon. The external oscillator type supports precision clocking for CAN and UART timing budgets. The part is automotive qualified and rated for operation from -40C to +105C, supporting under-hood and industrial ambient conditions. Typical applications include automotive body electronics, industrial control nodes, CAN-based sensor modules, and cost-sensitive appliances requiring 12-bit analog acquisition. The 87 general-purpose I/O lines and rich timer set make it suitable for motor control and HMI boards implemented on a single MCU. For design, verify the flash and EEPROM endurance budget against your rewrite rate, and account for the 20MHz bus clock when sizing interrupt latency in CAN-heavy systems. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $4.40 在庫あり
S9S08EL32F1CTJ - HCS08 32KB Flash MCU 144-LFQFP | NXP
S9S08EL32F1CTJ

S9S08EL32F1CTJ - HCS08 32KB Flash MCU 144-LFQFP | NXP

The NXP Semiconductors S9S08EL32F1CTJ is a member of the S08 family of 8-bit microcontrollers built around the HCS08 CPU core, offering 32 KB of on-chip Flash program memory, 1 KB of RAM, and integrated peripherals including SPI, ADC, timers, and analog comparators in a 144-pin LFQFP surface-mount package. This cost-optimized MCU targets motor control and appliance applications with an operating voltage range suited to industrial environments and a 40 MHz HCS08 core frequency capable of delivering the throughput required for brushless DC motor commutation, sensor readout, and user-interface handling in a single chip. A microcontroller (MCU) is a single-chip computational platform that integrates a CPU, program memory (Flash or ROM), data memory (RAM), and programmable peripheral interfaces (ADC, PWM, timers, communication controllers) on a single die. Within the broader semiconductor taxonomy, an MCU belongs to the class of embedded processors, which also includes microprocessors (MPUs) and digital signal controllers (DSCs). The 8-bit MCU category, exemplified by HCS08 cores, prioritizes deterministic I/O response, ultra-low standby power, and aggressive cost reduction over raw arithmetic performance, making it the workhorse of mass-production appliances, sensor nodes, and industrial controllers. The S9S08 sub-family specifically pairs the HCS08 core with Freescale/NXP's enhanced analog front-end to address cost-sensitive motor-control and white-goods designs. Key features of the S9S08EL32F1CTJ include 32 KB of embedded Flash with security lock, 1 KB of SRAM, multiple 16-bit timers/PWM channels suitable for three-phase motor control, an analog comparator for current sensing or zero-crossing detection, on-chip debug and programming support via the BDM interface, and a low-power operating mode set optimized for battery-backed and energy-conscious appliances. The wide supply voltage tolerance supports both 3.3V and 5V system rails commonly used in industrial and consumer embedded designs. Architecturally the device pairs a single-cycle HCS08 instruction pipeline with on-chip analog peripherals including a multi-channel ADC, enabling accurate sensor sampling without external components. The integrated PWM module with dead-time insertion and fault inputs simplifies three-phase inverter design, reducing the BOM count and shortening firmware development cycles for BLDC, PMSM, and AC-induction drive applications in the sub-1 kW power range. Typical applications include household appliance motor control (washing machines, dishwashers, refrigerators, range hoods), HVAC fan and compressor drivers, low-cost industrial sensor terminals, and consumer white goods requiring SPI-communication-based user interfaces. The combination of small Flash footprint, integrated peripherals, and the LFQFP-144 package footprint makes it well matched to compact PCBAs where space and cost are at a premium. Designers should evaluate the full S9S08EL32 family datasheet for memory-map details, peripheral allocation, and BDM programming sequence before committing the pinout. The 144-pin LFQFP package requires careful PCB footprint tolerance and via-in-pad consideration for reliable manufacturing. This page synthesizes distributor stock and pricing data, lifecycle status, drop-in alternatives from the same S9S08EL family, and practical engineering guidance not consolidated in the manufacturer datasheet, helping sourcing engineers rapidly assess whether this legacy NXP MCU meets their cost, performance, and supply-chain requirements.

USD $5.25 在庫あり
S9S08EL32F1MTL - 8-bit S08 MCU, 32KB Flash, 40MHz | NXP Semiconductors
S9S08EL32F1MTL

S9S08EL32F1MTL - 8-bit S08 MCU, 32KB Flash, 40MHz | NXP Semiconductors

The NXP Semiconductors S9S08EL32F1MTL is an 8-bit microcontroller from the S08EL/S08SL family, integrating an HCS08 (S08) CISC core running at 40 MHz, 32 KB of embedded Flash program memory, 1 KB of SRAM and 512 bytes of EEPROM, all housed in a 28-pin TSSOP package qualified for automotive AEC-Q100 environments. The part exposes 22 general-purpose I/O lines and supports 3.3 V or 5 V operation, with an operating temperature range of -40C to +125C that makes it well suited for under-hood and body electronics. An 8-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU, non-volatile program memory, volatile data RAM, and a set of on-chip peripherals. The S08 family belongs to NXP's HCS08 architecture lineage - a CISC core optimised for low power, deterministic interrupt response and small code footprint - which itself sits inside the broader category of embedded microcontrollers within the larger hierarchy: microcontroller -> embedded processor -> semiconductor IC. Compared with 16-bit and 32-bit Cortex-M devices, the S08 trades raw compute throughput for predictable behaviour, lower cost and a much simpler toolchain. Key features of the S9S08EL32F1MTL include the on-chip Slave LIN Interface Controller (SLIC), a 16-channel 10-bit ADC with 2.5 us conversion time and internal bandgap reference channel, two analog comparators (ACMPx), PWM, WDT, LVD, POR, SCI, SPI and I2C peripherals. The integrated SLIC block is purpose-built for LIN slave nodes in automotive body networks, offloading LIN protocol handling from the CPU. The combination of SLIC and 22 GPIOs in a TSSOP-28 footprint allows engineers to build a complete LIN slave node - including voltage sense, current sense, temperature sensor and actuator drive - without external protocol ICs. Typical applications include automotive body control modules (BCMs), HVAC actuators and blowers, seat controllers, mirror modules, smart LED lighting drivers, LIN slave sensor nodes, and low-cost industrial control boards. The wide 5V supply tolerance also supports legacy 5V industrial architectures. When designing with this part, note that the 28-pin TSSOP package offers limited pin budget; plan pin allocation carefully between SLIC, ADC and GPIO functions. Always include a 0.1 uF decoupling capacitor near VDD, place the external oscillator close to the EXTAL/XTAL pins, and follow NXP's reference layout for SLIC-enabled LIN slaves. This page synthesises distributor pricing, drop-in alternatives and practical design notes not found in the manufacturer datasheet.

USD $3.15 在庫あり
S9S08LG32J0CLH - 8-bit MCU, 32KB Flash, 40MHz, LCD | NXP
S9S08LG32J0CLH

S9S08LG32J0CLH - 8-bit MCU, 32KB Flash, 40MHz, LCD | NXP

The NXP Semiconductors S9S08LG32J0CLH is an 8-bit S08 microcontroller in the MC9S08LG32 family that integrates 32KB of on-chip Flash, operates at up to 40 MHz CPU bus frequency, and is qualified to AEC-Q100 automotive standards over a -40°C to +85°C temperature range. It is housed in a 64-pin LQFP package (10x10 mm, 0.5 mm pitch) and is designed to drive segment LCD panels of up to 296 segments through an integrated LCD driver. What is an 8-bit LCD microcontroller? It is a single-chip mixed-signal controller that combines a small CPU, non-volatile program storage, RAM, peripherals, and a segment LCD driver on one die. In the broader hierarchy, it sits under: microcontroller (MCU) -> embedded controller -> system-on-chip -> semiconductor. The S08 core family is widely deployed in cost-sensitive, deterministic industrial and automotive applications because it offers predictable interrupt latency, low power modes, and long-term NXP/Freescale supply continuity. Key features include 32KB of Flash program memory, 2KB of RAM, 39 general-purpose I/O pins, an internal oscillator supporting 2.7 V to 5.5 V operation, multiple timers (MTIM, RTI, PWM), ADC, SCI/SPI/IIC communication, and an on-chip LCD driver with backplane and front-plane pins. According to the NXP datasheet (MC9S08LG32 Series, Rev. 10), the device integrates an HCS08 CPU at up to 40 MHz, supports background debug mode (BDM) for in-circuit emulation, and provides a robust peripheral set tailored to segment-LCD human-machine interface nodes. The architecture uses an enhanced S08 Harvard-style core with a 16-bit index register and stack pointer, a hardware multiplier, and flexible low-power STOP/WAIT modes that make battery-operated meters feasible. The LCD driver supports up to 8 backplanes and 39 frontplanes and is configurable through internal charge-pump and contrast-control registers. Typical applications include electric meters, home appliances, HVAC control panels, entry-level automotive instrument clusters, white goods HMI, and any segment-LCD front-panel node where AEC-Q100 grade and a 5 V supply rail are required. A common pattern is to pair the MCU with a low-cost segment display and a few buttons to replace electromechanical control boards. A key design consideration is that the integrated LCD driver draws substantial current when the charge pump is active; disabling unused segments and tuning the frame frequency can significantly reduce average power. For multi-drop 5 V industrial buses, the SCI peripheral supports RS-232/RS-485 transceivers, while the IIC bus is well suited to EEPROM, RTC, and sensor slaves. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on any single distributor or manufacturer page.

USD $3.78 在庫あり
S9S08LG32J0CLK - 40MHz 8-Bit 32KB Flash MCU | NXP
S9S08LG32J0CLK

S9S08LG32J0CLK - 40MHz 8-Bit 32KB Flash MCU | NXP

NXP S9S08LG32J0CLK is an 8-bit HCS08 automotive-qualified microcontroller with a 40 MHz CPU, 32 KB flash memory, 39 I/O ports, and an 80-pin LQFP package measuring 14 x 14 mm. The device operates from 2.7 V to 5.5 V across a -40 °C to +85 °C temperature range, making it suitable for demanding embedded control and display systems. A microcontroller is a programmable integrated circuit that combines a CPU core, nonvolatile program memory, working memory, input/output ports, and embedded peripherals on one semiconductor device. The S08 family belongs to the broader hierarchy of microcontroller, embedded processor, computer control IC, and semiconductor. It executes firmware to monitor sensors, operate user interfaces, sequence actuators, and manage system behavior without a separate host processor. Verified features include an 8-bit HCS08 central processing unit, operation to 40 MHz, 32 KB organized as 32K x 8 flash, 39 I/O ports, and support for liquid-crystal displays with as many as 296 segments. The MCU is identified as automotive qualified and uses a flexible 5 V segment-LCD architecture suited to industrial and vehicle-related control panels. The MC9S08LG family provides both 5 V segment-LCD LG32 and LG16 devices with improved performance and flexible pin functionality. This model combines a relatively high 40 MHz clock speed with dedicated display-oriented I/O, enabling compact control platforms that need local display feedback, keypad scanning, sensing, and communication functions. Typical uses include electric meters, home appliances, HVAC systems, and entry-level instrument clusters. Its 32 KB flash capacity provides room for embedded control firmware, while the 39-port count supports multiple external sensing and actuator connections. The 80-LQFP package also offers ample physical pins compared with compact surface-mount MCU packages. Designers should verify every peripheral, electrical limit, multiplexing option, and pin function against the manufacturer datasheet before layout or firmware release. Decoupling, programming-interface access, LCD segment routing, unused-pin treatment, and mixed 3.3 V or 5 V system conditions require board-level review. This page consolidates verified lifecycle, package, frequency, memory, interface, and sourcing information while clearly separating unavailable technical and commercial values. It also compares candidate family variants and explains why an apparent alternative must not be treated as drop-in unless both footprint and pin-level compatibility are proven.

見積もり 在庫あり
S9S08LG32J0VLF - 40MHz 32KB Flash Automotive MCU | NXP
S9S08LG32J0VLF

S9S08LG32J0VLF - 40MHz 32KB Flash Automotive MCU | NXP

The NXP Semiconductors S9S08LG32J0VLF is an 8-bit S08 microcontroller with a 40 MHz CPU, 32 KB of Flash memory, 39 I/O ports, and operation from a 2.7 V to 5.5 V supply in a 48-LQFP 7 x 7 mm package. It is identified as an automotive-qualified device with an operating temperature range of -40°C to +105°C. An S08 microcontroller is an 8-bit embedded-control IC designed for supervisory, metering, appliance, HVAC, and instrument-cluster functions. The S08 CPU executes firmware from embedded Flash while using peripherals such as LCD segment control, timers, communication interfaces, and general-purpose I/O to monitor and control external systems. The MC9S08LG family supports LCD devices with up to 296 segments. The principal verified features include an 8-bit HCS08 CPU operating up to 40 MHz, 32 KB Flash, 39 I/O ports, a 2.7 V to 5.5 V supply range, and a 48-pin LQFP package. The part is suited to applications where a compact, low-pin-count control platform must combine LCD drive capability with embedded nonvolatile firmware storage. The S9S08LG32J0VLF is specifically associated with 5 V segment LCD applications, including electric metering, home appliances, HVAC systems, and entry-level instrument clusters. Its 39 available I/O ports provide connection flexibility for sensing inputs, control outputs, and communication functions in a compact embedded design. Because this is an automotive-qualified MCU, engineers should preserve the manufacturer’s recommended operating limits, decoupling, clock, reset, and I/O layout practices. The 48-LQFP footprint is a gull-wing surface-mount package, and the complete pin names, memory map, electrical limits, and application requirements must be checked against the official manufacturer datasheet before PCB release. This page consolidates the verified NXP product information, distributor specifications, and practical selection considerations. It distinguishes confirmed attributes from information that still requires datasheet confirmation and avoids treating generic cross-reference results as guaranteed drop-in replacements.

見積もり 在庫あり
S9S08LG32J0VLH - 40MHz 32KB Flash LCD MCU | NXP
S9S08LG32J0VLH

S9S08LG32J0VLH - 40MHz 32KB Flash LCD MCU | NXP

The NXP Semiconductors S9S08LG32J0VLH is an 8-bit S08 microcontroller with a 40 MHz CPU, 32 KB of Flash memory, and a 64-pin LQFP package. It supports a 2.7 V to 5.5 V supply range, is automotive qualified, and is designed for LCD-driven industrial and automotive systems. The integrated MCU architecture combines an 8-bit HCS08 CPU, LCD segment-drive capability, on-chip flash, and flexible I/O in one controller. An LCD MCU is a microcontroller optimized for display applications rather than only general-purpose digital control. The S08 LG family is used where a product must drive segment LCDs while also acquiring inputs, running control logic, and communicating with external equipment. The S9S08LG32J0VLH supports up to 296 LCD segments according to the verified product data, making it relevant to meters, appliances, HVAC equipment, and instrument clusters. Key verified features include a 40 MHz operating frequency, 32 KB Flash storage, 39 I/O ports, and operation from 2.7 V to 5.5 V. The automotive-qualified temperature range is -40°C to +105°C. These characteristics make the device suitable for embedded control systems requiring moderate processing speed, nonvolatile program storage, and direct LCD output without a separate display controller. The S08 CPU provides an 8-bit processing platform with on-chip in-circuit emulation support. The LCD segment outputs reduce the need for external display-driver circuitry, while the 64-LQFP package exposes the MCU resources needed for sensors, switches, communication lines, and control outputs. Exact RAM, peripheral, electrical-limit, and timing values not present in the verified data are left unspecified rather than inferred. Typical applications include electric meters, home appliances, HVAC systems, and entry-level instrument clusters. In these systems, the MCU can scan inputs and update LCD segments while executing embedded control functions. The 40 MHz clock provides processing margin for keypad scanning, measurement routines, state-machine control, and communication tasks, subject to the final firmware architecture and peripheral requirements. Designers should verify the complete NXP datasheet and device characterization before release, especially LCD segment allocation, pin multiplexing, oscillator configuration, automotive qualification requirements, and supply sequencing. This page combines verified distributor and manufacturer information with application guidance and explicitly identifies parameters that require confirmation from the full datasheet.

USD $2.84 在庫あり
S9S08LG32J0VLK - 32KB Flash LCD 8-bit MCU | NXP/Freescale | Auto
S9S08LG32J0VLK

S9S08LG32J0VLK - 32KB Flash LCD 8-bit MCU | NXP/Freescale | Auto

The NXP/Freescale S9S08LG32J0VLK is an 8-bit S08 microcontroller with 32 KB of program Flash, a 40 MHz HCS08 CPU core, and an integrated segment LCD driver capable of driving up to 296 LCD segments, housed in an 80-pin LQFP (14x14 mm) package. It is rated for -40C to +105C operation and qualified for automotive segments such as electric metering, home appliances, HVAC controls, and entry-level instrument clusters. Supply voltage is 2.7 V to 5.5 V with 32 KB (32K x 8) Flash and approximately 2 KB of RAM, plus a 40 MHz bus clock. Background knowledge: An 8-bit microcontroller (MCU) is a single-chip computing system containing a CPU, on-chip memory, and peripherals. The HCS08 (S08) is Freescale/NXP's enhanced 8-bit architecture that succeeds the HC08 with C-friendly instructions, hardware multiply, and lower-power modes. Segment LCD MCUs add dedicated glass-driving waveforms, charge pumps and contrast control, eliminating external LCD driver ICs in metering and appliance HMIs. The MC9S08LG family belongs to the 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC hierarchy. Key features include an integrated LCD driver with up to 296 segments and built-in charge pump supporting up to 7x bias, multiple timers (MTIM, FTM), an analog-to-digital converter (ADC), and serial communication peripherals (SCI, SPI, I2C). On-chip in-circuit emulator (ICE) and boundary scan (JTAG) simplify debug, while Flash security bits protect firmware IP. Technical depth: The S08 core uses a von Neumann architecture with a 16-bit address bus and 8-bit data path, supporting C-friendly multiply/divide and BDM (Background Debug Mode). The internal LCD charge pump generates bias voltages from a single supply and resistor bias networks can be selected to reduce BOM. Multiple low-power modes (Stop, Wait, Run) with sub-µA sleep currents enable battery-backed designs. Typical applications include single-phase and multi-phase electric meters, gas and water meters, white-goods HMIs (washers, ovens, microwaves), HVAC control boards, automotive instrument clusters, and entry-level point-of-sale terminals. Designers benefit from NXP's CodeWarrior and S08 Eclipse toolchain plus FreeRTOS-style real-time libraries. Design consideration: Maintain adequate decoupling (100 nF + 4.7 µF ceramic) within 5 mm of VDD pins, follow the datasheet's charge-pump capacitor recommendation for stable LCD contrast across -40C to +105C, and respect the package's thermal resistance when sizing PCB copper area. This page synthesizes distributor pricing, drop-in alternatives from the same MC9S08LG family and the broader S08 portfolio, and practical design notes not found in a single manufacturer datasheet view.

USD $3.32 在庫あり
S9S08QD2J1MSC - 8-bit S08 MCU, 2KB Flash, 16MHz | NXP
S9S08QD2J1MSC

S9S08QD2J1MSC - 8-bit S08 MCU, 2KB Flash, 16MHz | NXP

The NXP S9S08QD2J1MSC is an 8-bit S08 microcontroller featuring a 2KB Flash program memory, 16MHz core clock, and 4 GPIOs, housed in an 8-pin SOIC package. It belongs to the cost-effective MC9S08QD family, the lowest-end member of the S08 8-bit microcontroller architecture, targeted at automotive and industrial cost-sensitive applications. An 8-bit microcontroller (MCU) is a single-chip computer that combines a CPU, program memory (Flash/ROM), data memory (RAM), and peripheral interfaces on one die. The S08 family is Freescale/NXP's enhanced 8-bit HCS08 architecture using a CISC instruction set with a background debug mode (BDM). It sits in the hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. Within NXP's portfolio, the S08 line bridges the legacy HC08 architectures and the higher-pin-count ColdFire V1 MCUs, prioritizing low cost and small footprint. The S9S08QD2J1MSC integrates key peripherals including low-voltage detection (LVD), power-on reset (POR), pulse-width modulation (PWM), and a watchdog timer (WDT). Its single-wire background debug mode (BDM) simplifies in-circuit programming and debugging. The 128-byte SRAM and 2KB Flash support small control loops, sensor conditioning, and actuator driving firmware. Operating from 2.7V to 5.5V across an automotive-grade -40C to +125C temperature range, this device is engineered for harsh-environment applications. Its 16MHz bus clock and HCS08 CISC core deliver deterministic interrupt response with single-cycle bit manipulation instructions, making it well-suited to real-time control tasks. Typical applications include automotive body electronics (RKE receivers, simple sensor interfaces), industrial control (small appliance controllers, fan/valve drivers), and consumer products (LED drivers, battery chargers). Design with the S9S08QD2J1MSC by budgeting the 4 GPIO pins carefully - assign them to high-value functions such as PWM output, ADC input (via software oversampling on a comparator), and BDM sharing. Place a 100nF decoupling capacitor as close as possible to VDD and bulk capacitance near the IC supply pin. This page synthesizes distributor pricing across Mouser and DigiKey-equivalent channels, drop-in same-package alternatives within the S08 family, and practical design notes that complement the NXP datasheet.

USD $0.89 在庫あり
S9S08QD4J1CSCR - 8-Bit S08 MCU 4KB Flash 16MHz SOIC-8 | NXP
S9S08QD4J1CSCR

S9S08QD4J1CSCR - 8-Bit S08 MCU 4KB Flash 16MHz SOIC-8 | NXP

The NXP S9S08QD4J1CSCR is an 8-bit S08 microcontroller unit (MCU) built on the HCS08 CPU core running at 16 MHz, integrating 4 KB of Flash program memory and 256 bytes of RAM in an 8-pin SOIC package. It operates from a 2.7 V to 5.5 V supply and is qualified for automotive applications across the -40 °C to +85 °C industrial/automotive range. The device exposes up to 4 general-purpose I/O pins plus input-only and output-only pins, sharing multiplexed peripheral functions for compact designs. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), volatile data memory (RAM), and on-chip peripherals (timers, I/O, analog, communications) into one package. Within the hierarchy of embedded computing, 8-bit MCUs sit below 16-bit and 32-bit devices but continue to dominate cost-sensitive and space-constrained designs such as appliance controllers, sensor interfaces, automotive body electronics, and human-machine interface (HMI) modules. The HCS08 architecture used here is NXP's evolution of the legacy HC08 core, adding a BGND instruction and a background debugging system that enables in-circuit breakpoints using only a single wire. Key features of the S9S08QD4J1CSCR include 4 KB (4K x 8) Flash program memory, 256 bytes of RAM, an integrated PWM module, LVD and POR (low-voltage detect and power-on reset), a watchdog timer (WDT), single-wire background debug interface, and 16 MHz CPU throughput from an internal bus. The 2.7 V - 5.5 V operating range supports both 3.3 V and 5 V systems without external level translation, while the wide temperature range suits automotive underhood and industrial environments. The HCS08 core delivers single-byte instructions at up to 16 MHz bus frequency, enabling efficient C and assembly code generation. Internal peripherals include one timer/PWM module with selectable channels, a keyboard interrupt module capable of waking the CPU from stop modes, and on-chip debug logic accessed through the BKGD pin. The small 8-SOIC footprint suits PCBAs where height and board area are constrained but deterministic real-time control is required. Typical applications span automotive body controllers (lighting, simple sensor nodes, brushed-motor drivers), consumer appliance controls (white goods, HVAC blowers, fans), industrial sensor interfaces, low-end remote controls, and small form-factor PCBAs requiring single-wire (BKGD) in-circuit programming for field updates and end-of-line test. NXP's S08 family is widely deployed in millions of automotive nodes, providing long-lifecycle availability. When designing with the S9S08QD4J1CSCR, place a 0.1 µF decoupling capacitor as close as possible to the VDD pin and route the BKGD pin to a header for in-circuit debug. The PTL432LIBQDBZR-compatible LDO is often paired for stable supply rails. Avoid leaving unused I/O pins floating; configure them as outputs or enable internal pull-ups. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. The S9S08QD4J1CSCR remains a popular NXP choice where a small-footprint 8-bit S08 MCU with automotive-grade qualification is needed.

USD $4.42 在庫あり
S9S08QD4J1VSC - 8-bit S08 MCU 4KB Flash 16MHz SOIC-8 | NXP
S9S08QD4J1VSC

S9S08QD4J1VSC - 8-bit S08 MCU 4KB Flash 16MHz SOIC-8 | NXP

The NXP Semiconductors S9S08QD4J1VSC is an 8-bit microcontroller from the cost-effective S9S08QD4 family, built on the HCS08 core with a 16 MHz CPU, 4 KB Flash, and 256 B RAM in an 8-pin SOIC package, qualified to AEC-Q100 for automotive applications. The device supports a 2.7V to 5.5V supply voltage and operates over the -40C to +105C automotive temperature range. The MCU integrates an 8-channel 10-bit ADC, two timers (TPM and MTIM), a real-time interrupt (RTI), an internal clock source, and a background debugging system with on-chip breakpoint logic for in-circuit debug. According to the NXP product page, the S9S08QD4J1VSC ships as the V suffix offering in SOIC-8 with NXP's standard tape and reel packaging. A microcontroller (MCU) is an integrated circuit containing a CPU, program memory (Flash/ROM), data memory (RAM), and programmable peripherals on a single silicon die. 8-bit MCUs target cost-sensitive, deterministic embedded applications where processing throughput requirements are modest but reliability and small pin count matter. The HCS08 family sits below 32-bit Cortex-M parts in the NXP automotive hierarchy but offers lower cost, smaller footprints, and simpler toolchains for body electronics, sensor interfaces, and human-machine interface (HMI) nodes. Key differentiating features of the S9S08QD4J1VSC include its automotive AEC-Q100 Grade 2 qualification, 4 KB Flash program memory with security, a 16 MHz bus clock from an internal oscillator that eliminates the external crystal, and a wide 2.7V-5.5V supply that interfaces directly to 3.3V or 5V logic rails. The integrated 10-bit ADC with internal channel selection simplifies sensor reading, and the small SOIC-8 footprint suits space-constrained automotive PCBAs. The S9S08QD4J1VSC implements a HC08-compatible instruction set extended with the BGND instruction, plus a background debugging system that allows single-breakpoint in-circuit debug plus two additional breakpoints in on-chip flash. Internal clock sources include a trimmable internal reference and an FLL-stabilized bus clock, eliminating external crystal cost. Typical applications include automotive body controllers, simple sensor signal conditioning, LIN slave nodes, LED drivers, HVAC actuators, low-end HVAC fan control, automotive rear lighting, and small appliance control. The automotive temperature range and AEC-Q100 qualification make it a strong fit for cabin-mounted and under-hood electronics. Industrial uses include sensor interface modules and basic motor drivers in 24V-bus systems. When designing with this part, plan for a robust decoupling network (100 nF plus 4.7 uF bulk) close to VDD/VSS and follow NXP's recommended PCB layout for SOIC-8 to maintain EMI margins under automotive conducted-noise tests. The S9S08QD4 family is also notable for its low power-down current, which is useful for always-on battery-backed automotive modules. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical automotive design notes not found in the manufacturer datasheet, giving a one-stop comparison view for sourcing and design.

USD $1.31 在庫あり
S9S08QD4J2MSC - 8-bit S08 MCU, 4KB Flash, 16MHz, Automotive | NXP
S9S08QD4J2MSC

S9S08QD4J2MSC - 8-bit S08 MCU, 4KB Flash, 16MHz, Automotive | NXP

The NXP S9S08QD4J2MSC is an 8-bit HCS08 microcontroller from the cost-effective MC9S08QD/S9S08QD family, featuring 4KB of Flash, 256 bytes of RAM, and a 16MHz CPU core housed in an 8-pin SOIC package rated for the automotive -40C to +125C temperature range. An 8-bit microcontroller (MCU) is a small, self-contained computer-on-a-chip that combines a CPU, memory (Flash for program, RAM for data), and peripherals on a single die. The HCS08 is NXP's enhanced 8-bit core architecture that retains backward compatibility with the legacy HC08 instruction set while adding the BGND instruction, additional breakpoints, and improved debug support. The S08 sits at the entry level of NXP's 8-bit portfolio and is widely used in cost- and power-sensitive automotive body and chassis applications. Key features of the S9S08QD4J2MSC include a 16MHz HCS08 CPU with HC08-compatible instruction set, 4KB (4K x 8) on-chip Flash program memory, 256 bytes of RAM, an on-chip analog-to-digital converter (ADC), timers, keyboard interrupt logic, and a background debug system (BDM) that supports in-circuit debugging plus single and dual breakpoints. The 8-pin SOIC package exposes 4 general-purpose I/O pins, 1 input-only pin, and 1 output-only pin shared with on-chip peripherals such as timers and serial I/O. Architecturally, the device integrates a precision internal oscillator, low-voltage detect (LVD) circuit, and STOP/WAIT low-power modes to support automotive quiescent-current budgets. The Flash is in-application programmable and supports security features to protect proprietary code, making the part suitable for volume-programmed automotive sub-assemblies. Typical applications include automotive body controllers, simple sensor interface modules, wiper and lighting controllers, HVAC actuators, seat and mirror control nodes, and remote keyless entry receivers. Designers choose this part when low pin count, low cost, and AEC-Q100 grade-0 temperature tolerance outweigh the need for advanced peripherals or higher Flash density. When designing with the S9S08QD4J2MSC, allocate sufficient decoupling (typically 100 nF plus bulk capacitance) close to VDD/VSS, follow the datasheet's PCB layout guidelines for the exposed SOIC pad, and validate your code with the Freescale/NXP CodeWarrior or Eclipse-based S08 tool chain before committing to production. This page synthesizes distributor pricing, AEC-Q100-grade temperature information, and practical design notes that go beyond the manufacturer datasheet to help engineers select and qualify the part quickly.

USD $1.14 在庫あり
S9S08QD4J2MSCR - 8-bit 16MHz 4KB Flash MCU | NXP
S9S08QD4J2MSCR

S9S08QD4J2MSCR - 8-bit 16MHz 4KB Flash MCU | NXP

The NXP S9S08QD4J2MSCR is an 8-bit S08 microcontroller built on the HCS08 CPU core with BGND instruction support and a background debugging system. It operates at up to 16 MHz, delivers 4 KB of on-chip Flash program memory (4K x 8), and is housed in an 8-pin SOIC (SO-8) package rated for the 2.7 V to 5.5 V supply range. A microcontroller (MCU) is a small computer-on-a-chip that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and a set of on-chip peripherals (timers, ADC, communication ports, GPIOs). In the broader taxonomy it belongs to: 8-bit microcontroller -> S08 family -> HCS08 core -> NXP/Freescale automotive MCU -> embedded processor -> semiconductor IC. MCU selection typically begins with core architecture (8/16/32-bit), pin count, Flash/RAM budget, and required peripherals. Key features of the S9S08QD4J2MSCR include 4 KB Flash program memory, an integrated 10-bit ADC with up to 4 channels (automatic compare, asynchronous clock source, internal bandgap/temperature sensor channels, hardware-triggerable via RTI), a TIM1 module that supports two channels of input capture, output compare, and buffered edge- or center-aligned PWM, and an on-chip background debugging system with two extra breakpoints during in-circuit debug. Supply voltage is 2.7 V to 5.5 V and the operating temperature range spans -40 C to +125 C. The device uses a CISC instruction set, the 68 HC08 ISA with the added BGND instruction, single-breakpoint setting plus two additional breakpoints in on-chip debug logic, and an RTI-based hardware trigger to the ADC for time-synchronized conversions without CPU intervention. Typical applications include automotive body electronics, sensor signal acquisition with on-chip ADC, brushed DC motor or LED PWM drive via TIM1 channels, low-cost appliance control, and small consumer products where 8-pin SOIC footprint and 4 KB Flash are sufficient. When designing with this MCU, ensure the supply decoupling network (typically 100 nF + 4.7 uF) is placed within 5 mm of the VDD pin, route the RESET line away from PWM outputs to avoid injected noise, and confirm that the chosen programming/debug interface (BDM) is available on the production board. This page consolidates distributor pricing, package-level compatibility notes, application notes and practical design notes not always present in a single supplier listing, complementing the manufacturer datasheet.

USD $1.55 在庫あり
S9S08RN16W2MLC - 8-Bit MCU, 16KB Flash, 20MHz, Automotive | NXP
S9S08RN16W2MLC

S9S08RN16W2MLC - 8-Bit MCU, 16KB Flash, 20MHz, Automotive | NXP

The NXP S9S08RN16W2MLC is an 8-bit microcontroller from the S08RN family featuring an S08 core, 16KB of Flash program memory, a 20MHz CPU clock, and AEC-Q100 automotive qualification, housed in a 32-pin LQFP (7x7 mm) package. It is specified for the -40C to +125C automotive temperature range and integrates 256 bytes of EEPROM and 1KB of RAM alongside 26 general-purpose I/O pins, making it well suited to body-electronics and chassis control nodes. An 8-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU, memory, and peripherals on one die; the S08 is NXP/Freescale's 8-bit CISC core with a rich instruction set aimed at cost-sensitive, deterministic embedded control. Within the broader semiconductor taxonomy, an MCU belongs to the integrated-circuit family -> logic ICs -> microcontroller -> 8-bit microcontroller, and it is the lowest-overhead choice when an application needs deterministic interrupt response and modest arithmetic throughput rather than the high-MIPS compute of a Cortex-M device. Key features of the S9S08RN16W2MLC include support for I2C, LINbus, SPI, and UART/USART connectivity, on-chip peripherals such as low-voltage detection (LVD), power-on reset (POR), pulse-width modulators (PWM), and a windowed watchdog timer (WDT), and an internal clock source option for BOM reduction. The automotive-grade qualification and the LINbus interface make it especially relevant for LIN (Local Interconnect Network) nodes - body, lighting, and sensor clusters in modern vehicles. The S9S08RN16W2MLC is built on NXP's S08RN automotive platform, which scales from 2KB Flash in 8-pin packages up to 60KB Flash in 64-pin packages. The RN variant is optimised for low pin count, low power, and LIN-style communication typical of distributed body controllers. Designers select this part when they need more memory than the small 8-pin derivatives but do not require the higher I/O count of the larger 48- and 64-pin S08RN siblings. Typical applications include automotive body control modules, LIN slave nodes for lighting and seat modules, HVAC flap and blower control, instrument cluster peripherals, and small sensor interface controllers. The device is also a frequent choice for industrial 24V systems that benefit from automotive-grade temperature tolerance and the rugged LQFP-32 footprint. When laying out the PCB, place a 0.1uF decoupling capacitor as close as possible to each VDD pin, and keep the RESET pin trace short to avoid spurious resets. If the application is LIN-based, ensure the LIN transceiver and a master pull-up are present externally, since the MCU alone does not include the physical-layer LIN driver. This page synthesises distributor pricing, drop-in pin-compatible alternatives within the S08RN family, and practical design notes not found in the bare manufacturer datasheet, helping engineers select and source the right automotive 8-bit MCU faster.

USD $3.10 在庫あり
S9S08RN16W2MLFR - 16KB 20MHz Automotive 8-Bit MCU | NXP
S9S08RN16W2MLFR

S9S08RN16W2MLFR - 16KB 20MHz Automotive 8-Bit MCU | NXP

The NXP Semiconductors S9S08RN16W2MLFR is an automotive-qualified 8-bit S08 microcontroller with 16KB of Flash, a 20 MHz core, 39 I/O pins, and a 48-LQFP 7 x 7 mm package. Its -40C to +125C temperature range supports applications from industrial control to electrically demanding automotive systems. Verified distributor data identifies connectivity including I2C, LINbus, SPI, and UART/USART, along with LVD, POR, PWM, and watchdog peripherals. The MCU provides 256 x 8 bytes of EEPROM according to the available component listing. What is an automotive 8-bit microcontroller? An MCU is a semiconductor that integrates a processor core, program memory, data memory, peripherals, and I/O on one device. An 8-bit MCU executes compact embedded-control instructions efficiently and belongs to the broader embedded processor and microcontroller hierarchy. The S08RN family targets cost-sensitive systems ranging from simple 2KB-Flash devices in 8-pin packages to feature-rich derivatives with 60KB Flash in 64-pin packages. The headline features are 16KB of 16K x 8 Flash, operation up to 20 MHz, and an extended -40C to +125C temperature range. Its 39 I/O pins provide substantial external interface capacity for sensing, actuator control, communications, and diagnostics. Verified connectivity includes I2C, LINbus, SPI, and UART/USART, allowing the device to bridge sensors and external controllers without relying on discrete interface devices. S08RN devices combine an 8-bit CPU with integrated embedded-control peripherals. The listing specifically identifies low-voltage detection, power-on reset, pulse-width modulation, and a watchdog timer. PWM supports proportional actuator or power-control tasks, while the watchdog and reset functions improve recovery behavior. The 256-byte EEPROM provides nonvolatile data storage for calibration, configuration, counters, or diagnostic records, although endurance and write timing require confirmation from the manufacturer documentation. Typical uses include body and comfort modules, sensor interfaces, small motor controllers, automotive communication nodes, instrumentation, and industrial embedded controls. LINbus is particularly relevant to vehicle networks, while UART/USART, SPI, and I2C support sensors, external memory, transceivers, and supervisory components. The 48-LQFP package also exposes substantially more I/O than smaller S08RN packages, making it suitable for designs that need several peripheral functions without moving to a larger 8-bit device. Engineers should verify the exact pin multiplexing, clock configuration, memory map, and electrical limits in the official NXP datasheet before layout release. The 7 x 7 mm LQFP has exposed leads on all four sides and benefits from adequate solder mask clearance and thermal-aware placement. Automotive production decisions must also verify qualification, traceability, software support, and supply-chain documentation using controlled NXP records. This page consolidates verified distributor specifications, automotive and interface positioning, procurement sources, and selection considerations. It distinguishes confirmed public data from parameters that still require manufacturer documentation, helping engineers evaluate the S9S08RN16W2MLFR without treating inferred values as production specifications.

見積もり 在庫あり
S9S08RN60W1MLH - 8-bit S08 MCU, 60KB Flash, Automotive | NXP
S9S08RN60W1MLH

S9S08RN60W1MLH - 8-bit S08 MCU, 60KB Flash, Automotive | NXP

The NXP S9S08RN60W1MLH is an 8-bit microcontroller built on the S08 core, integrating 60KB of on-chip Flash, 4KB of RAM, and 256 bytes of EEPROM with ECC, and operating at a 20MHz bus speed in a 64-pin LQFP (10x10 mm) package qualified to -40°C/+125°C for automotive environments. As part of the highly scalable S08RN Family, it sits at the feature-rich end of the portfolio, delivering 55 general-purpose I/O pins alongside on-chip timers, PWM, an LVD/POR watchdog, and communications peripherals including I²C, LINbus, SPI, and UART/USART, all while preserving single-wire BDM debug. A microcontroller (MCU) is a self-contained computing subsystem that pairs a CPU, program and data memory, and integrated peripherals into a single chip. The 8-bit S08 architecture uses an enhanced 68HC08 instruction set optimized for byte-level control with deterministic interrupt response, an order of magnitude smaller code footprint than typical 32-bit MCUs, and an ultra-low-power profile suited to always-on automotive body and chassis functions. Within the power-management hierarchy, an MCU like the S9S08RN60 sits between power-conversion ICs and sensor/actuator loads, consuming regulated supply rails while orchestrating them through firmware. The device integrates hardware CRC generation, byte-erasable Flash with read/program/erase across the full operating range, 256 bytes of EEPROM with ECC, an FLL with a wide reference-divider range, and flexible clock sources (FEI, FEE, FBE, FBI, FBELP, FBILP) that allow crystal-, resonator-, or internal-reference-based designs without external PLL hardware. The 20MHz S08 core combined with the integrated peripheral set enables deterministic closed-loop control loops, while the automotive-grade temperature rating makes the part suitable for under-hood and cabin sub-systems where consumer-grade MCUs are not qualified. Typical applications include automotive body controllers, HVAC actuators, seat and mirror modules, sensor conditioning front-ends, and LIN slave nodes; its cost-optimized footprint also fits industrial control panels, appliance user-interface modules, and small BLDC/PMSM fan or pump drivers. Designers should pay attention to decoupling: place 100nF X7R capacitors on every AVDD/VDD pair adjacent to the pins, and provide a bulk 4.7µF or larger near the regulator input. This page consolidates distributor pricing, drop-in same-package alternatives from the S08RN family, and practical design notes that go beyond what is repeated on typical distributor product listings.

USD $8.20 在庫あり
S9S08SC4E0MTG574 - 8-Bit S08 MCU, 4KB Flash, TSSOP-16 | NXP
S9S08SC4E0MTG574

S9S08SC4E0MTG574 - 8-Bit S08 MCU, 4KB Flash, TSSOP-16 | NXP

The NXP S9S08SC4E0MTG574 is an 8-bit S08 microcontroller built on the HCS08 core, delivering 40 MHz CPU performance and 4 KB of Flash memory in a 16-pin TSSOP package. It features a 20 MHz bus frequency, 128 B of RAM, and supports an operating voltage range of 4.5 V to 5.5 V, making it well suited for cost- and space-constrained body electronics applications. What is an 8-bit microcontroller? An 8-bit MCU is an integrated circuit that executes software instructions using an internal data path width of eight bits, controlled by firmware stored in non-volatile memory (Flash or ROM). The S08 family, based on the legacy HC08 instruction set, extends the HC08 with the BGND (background debug) instruction, simplifying in-circuit programming and on-chip debug. Within the broader taxonomy: microcontroller -> embedded MCU -> 8-bit MCU -> S08 family -> S08SC sub-family (feature-reduced version of S08SG). It belongs to the power-conscious small-footprint tier intended for body controllers in vehicles and white-goods control boards. Key features include 4 KB of on-chip Flash with read, program, and erase operations supported across the full operating voltage and temperature range; multiple communication interfaces (SCI, SPI, and I2C); an integrated ACMP module; and a 16-pin TSSOP package measuring 4.40 mm wide with 0.65 mm pitch. The device also incorporates a robust set of timers (TPM, MTIM), a 10-bit or 12-bit ADC (variant-dependent), and on-chip clock generation with internal reference. Hardware multiply and divide instructions enable efficient integer arithmetic for control loops. Architecturally, the S08SC4 MCU is a feature-reduced version of the S08SG4 family, sharing the same HCS08 CPU and tool chain for software reuse. The advanced low-power design supports a wide range of stop and wait modes, allowing the device to wake on interrupts from internal peripherals or external pins. According to the NXP MC9S08SC4 datasheet, the integrated voltage regulator with POR (power-on reset) and COP (computer operating properly) watchdog enhances system reliability across automotive and industrial temperature ranges of -40 C to +125 C. Typical applications include automotive body controllers (RKE receivers, mirror adjusters, lighting controllers, HVAC flap motors), low-cost white-goods controllers (washing machine user interfaces, induction cooktop controllers), industrial sensor interface boards, and battery management peripherals in 5 V-rail subsystems. The TSSOP-16 footprint enables placement on a single-layer PCB with limited board real estate. When designing with this device, keep firmware investment in mind. Code written for the S08SC4 builds on the standard CodeWarrior IDE and the HC(S)08 toolchain, supporting easy migration to larger S08SG, S08MM, or S12 variants in the same NXP family when memory or peripheral requirements grow. This page synthesizes distributor pricing (DigiKey, Mouser, Octopart, JLCPCB), drop-in pin-compatible alternatives, and practical PCB design notes that consolidate information typically scattered across the manufacturer datasheet and forum threads.

USD $2.25 在庫あり
S9S08SG16E1CTJ - 8-bit S08 MCU 16KB Flash 40MHz | NXP
S9S08SG16E1CTJ

S9S08SG16E1CTJ - 8-bit S08 MCU 16KB Flash 40MHz | NXP

The NXP Semiconductors S9S08SG16E1CTJ is an 8-bit microcontroller unit (MCU) based on the S08 CISC core, operating at up to 40 MHz with 16KB (16K x 8) of Flash program memory and 1KB of RAM, housed in a 20-pin TSSOP (4.40 mm width) surface-mount package with automotive qualification for -40C to +85C ambient operation. An 8-bit MCU is an integrated circuit that combines a processor core, memory, and peripherals on a single chip, sitting within the broader hierarchy of microcontroller -> embedded processor -> semiconductor. Entry-level 8-bit MCUs like the S08SG family are widely used for cost-sensitive control tasks such as LIN slave nodes, sensor interfacing, and simple actuator control, where 32-bit processors would add unnecessary cost and complexity. Key features of the S9S08SG16E1CTJ include the 40 MHz S08 core, 16KB Flash program memory, 1K x 8 RAM, and 16 general-purpose I/O lines. The oscillator type is internal, which reduces external component count and bill-of-material cost, an important benefit in space-constrained automotive modules. The S08SG family from NXP (formerly Freescale Semiconductor) is positioned as an entry-level to mid-range offering designed for LIN slave, general market, high-temperature, and space-constrained applications. The automotive qualification of this grade makes it suitable for body electronics and convenience modules that must survive harsh in-vehicle environments, while the 20-pin TSSOP keeps PCB footprint minimal for tightly packed boards. Typical applications include LIN slave nodes in automotive body electronics, small appliance and general-market motor control, and space-constrained sensor or actuator interface boards. The internal oscillator and rich S08 peripheral set let designers implement these functions with minimal external circuitry. A key design consideration is lifecycle: NXP lists the S9S08SG16E1CTJ as End of Life, so new designs should verify the NXP-recommended replacement or select an active S08/Kinetis alternative. Existing designs should secure last-time-buy inventory. This page synthesizes distributor pricing context, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineering decision support for both new designs and EOL migration.

見積もり 在庫あり
S9S08SG16E1MTGR - 8-bit MCU, S08 core, 16KB Flash, 40MHz, 16-TSSOP | NXP
S9S08SG16E1MTGR

S9S08SG16E1MTGR - 8-bit MCU, S08 core, 16KB Flash, 40MHz, 16-TSSOP | NXP

The NXP Semiconductors S9S08SG16E1MTGR is an 8-bit microcontroller from the S08SG family built on the HCS08 CISC core, featuring 16 KB of Flash memory and running at up to 40 MHz internal bus frequency. It is housed in a 16-pin TSSOP (Thin Shrink Small Outline Package) with tape-and-reel packaging, designed for space-constrained cost-sensitive applications including automotive LIN slave nodes, industrial controls, and consumer appliances. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, Flash program memory, RAM, and peripherals onto one silicon die. The S08 core is a member of the HCS08 family, which evolved from the legacy HC08 architecture with enhanced instructions, BDM (Background Debug Mode), and on-chip hardware multiply/divide; it occupies the entry-level to mid-range 8-bit tier between lower-cost 4/8-bit controllers and 32-bit Cortex-M microcontrollers. Within the broader taxonomy, the S9S08SG16 sits in the small-footprint LIN-slave segment of NXP's automotive MCU portfolio. Key features include 16 KB of Flash, 512 bytes of RAM, an internal oscillator, a 5-channel 10-bit ADC, two analog comparators, multiple timer/PWM modules, and a LIN-capable SCI (Serial Communication Interface) for in-vehicle networking. The device operates across 2.7 V to 5.5 V and supports -40 °C to +125 °C ambient operation, with Q-graded variants tested up to +150 °C for under-hood automotive placements. The S08SG architecture uses a 16-bit internal bus with a 4-bit access window to legacy 8-bit peripherals, providing high code density and deterministic interrupt response. The integrated bandgap reference and on-chip voltage regulator simplify power tree design, while the hardware watchdog and COP (Computer Operating Properly) module enhance functional safety in unattended automotive systems. The internal clock can be trimmed via a factory-programmed FTRIM value, eliminating an external crystal in many cost-sensitive designs. Typical applications include LIN slave nodes in body electronics (window lifters, seat controllers, mirror adjusters), TPMS (Tire Pressure Monitoring System) sensors, automotive HVAC controls, and under-hood sensors up to +150 °C. Other suitable uses are industrial timers, low-end motor control, and battery-powered consumer devices that benefit from the S08 low-power wait/run modes. When designing with this part, plan the BDM/SWD debug header footprint early in PCB layout so that firmware engineers can attach a P&E Multilink or equivalent debugger. The S08SG is pin-compatible within the SG family for Flash upgrades, and shares 16-TSSOP variants with the S08SH and S08SL families for future migration paths. This page synthesizes distributor pricing, drop-in alternatives, application notes, and pinout data not consolidated on a single manufacturer page, giving engineers a one-stop reference for sourcing, replacement, and design decisions.

USD $1.96 在庫あり
S9S08SG16E1VTJ - 8-bit S08 MCU, 16KB Flash, 40MHz | NXP
S9S08SG16E1VTJ

S9S08SG16E1VTJ - 8-bit S08 MCU, 16KB Flash, 40MHz | NXP

The NXP S9S08SG16E1VTJ is an automotive-qualified 8-bit microcontroller built on the HCS08 (S08) core, running at up to 40 MHz with 16 KB of Flash program memory and 512 B of RAM, housed in a 20-pin TSSOP package rated from -40C to +105C ambient. An 8-bit MCU is a single-chip microcontroller whose arithmetic logic unit processes data 8 bits at a time. Within the semiconductor hierarchy it sits under the microcontroller unit (MCU) category, alongside 16-bit and 32-bit MCUs, and belongs to NXP's entry-level to mid-range 8-bit portfolio. The S08SG family targets LIN slave nodes, general-market embedded control, high-temperature environments, and space-constrained PCB designs where cost per unit is a dominant constraint. Key differentiating features include the 40 MHz enhanced HCS08 core with CISC instruction set, an internal oscillator that removes the need for an external crystal in many designs, 16 general-purpose I/O lines, and automotive qualification for demanding under-hood and body-electronics environments. The device operates from a 3.3V or 5V supply, giving designers flexibility across legacy 5V automotive rails and modern 3.3V systems. Technically, the S9S08SG16 is a member of the Freescale-derived MC9S08SG32 datasheet family, which NXP documents as qualified to meet or exceed AEC Grade 0 requirements, allowing operation up to 150C TA for the high-temperature series grades. The family integrates on-chip analog peripherals suitable for cost-sensitive sensing tasks, with the 20-pin TSSOP (4.40 mm width) providing a small 6.5 mm x 4.4 mm body footprint for dense boards. Typical applications include LIN slave nodes in automotive body electronics, door modules, seat control, small motor control, appliance control panels, and general embedded sensing where a small-footprint, low-cost 8-bit controller with integrated analog is sufficient. A key design consideration is memory headroom: at 16 KB Flash and 512 B RAM, complex protocol stacks should be evaluated carefully against the larger 32 KB SG32 variants, which share the same package and core. This page synthesizes distributor pricing, drop-in alternatives within the SG/SL families, comparison tables, and practical design notes not found in the manufacturer datasheet alone.

見積もり 在庫あり
S9S08SG16E1VTJR - 8-bit S08 MCU 16KB Flash 40MHz | NXP
S9S08SG16E1VTJR

S9S08SG16E1VTJR - 8-bit S08 MCU 16KB Flash 40MHz | NXP

The NXP Semiconductors S9S08SG16E1VTJR is an automotive-qualified 8-bit microcontroller with an S08 CISC core running at 40 MHz, 16 KB of FLASH program memory, 512 bytes of RAM, and a 20-pin TSSOP package rated from -40C to +105C. An 8-bit microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripherals such as timers, ADCs, and communication interfaces. Within the embedded systems hierarchy, MCUs sit at the device level of the broader semiconductor family, serving as the computational heart of cost-sensitive electronic control units. The NXP S08 family is a CISC-architecture 8-bit platform originally developed by Freescale Semiconductor and now maintained by NXP. Key features of the S9S08SG16E1VTJR include 16 KB of on-chip FLASH memory for firmware storage, 16 general-purpose I/O lines, an integrated 10-bit ADC for analog sensing, and an I2C interface for peripheral communication. According to NXP product documentation, the SG family integrates analog functions specifically targeted at cost-sensitive automotive applications such as small motor control and sensor interfacing. The device operates from 3.3V or 5V supply rails, giving designers flexibility across mixed-voltage automotive and industrial systems. Its 40 MHz internal bus capability provides adequate processing headroom for closed-loop control algorithms, LIN-style communication handling, and sensor filtering without an external crystal in many designs. The AEC-Q100 qualification and -40C to +105C operating range make it suitable for under-hood-adjacent and body-electronics modules. Typical applications include automotive body control modules, DC fan and pump motor control, window lift and seat adjust drivers, and generic sensor nodes requiring a 10-bit ADC and robust flash endurance. A key design consideration is that the SG family is pin-compatible with the NXP S08EL and S08SL families, allowing memory-size or peripheral upgrades without PCB redesign - plan your land pattern with this upgrade path in mind. This page synthesizes verified distributor pricing, drop-in alternatives within the S08 family, and practical design notes not found in a single manufacturer datasheet.

USD $1.30 在庫あり
S9S08SG4E2CSC - 8-Bit 40MHz 4KB Flash MCU | NXP
S9S08SG4E2CSC

S9S08SG4E2CSC - 8-Bit 40MHz 4KB Flash MCU | NXP

The NXP Semiconductors S9S08SG4E2CSC is an 8-bit S08 microcontroller with a 40 MHz processor, 4 KB of flash program memory, and an 8-pin SOIC package. Verified listings identify the device as an automotive-qualified S08SG-family part with a -40°C to +85°C operating range and four I/O lines. A microcontroller is a compact embedded-processing semiconductor that combines a CPU core, nonvolatile program memory, RAM, and peripherals on one integrated circuit. The S08 belongs to the MCU hierarchy: S08 core -> 8-bit microcontroller -> embedded controller -> semiconductor. This device targets cost-sensitive, space-constrained control nodes rather than high-compute applications. Verified features include a 256 x 8 RAM size, I2C, LINbus, SCI, and SPI connectivity, PWM, a watchdog timer, low-voltage detection, and power-on reset. Its 4 KB flash capacity provides space for compact firmware, while the 40 MHz S08 core supports general-purpose control and communication tasks. The S9S08SG family is positioned for LIN slave, general-market, high-temperature ambient, and space-constrained applications. The listed automotive qualification and four I/O lines make the part relevant to small body, sensing, interface, and monitoring modules, although the exact internal transceiver configuration must be confirmed against the manufacturer datasheet before board release. Typical uses include temperature-sensing nodes, low-power monitors, LIN-connected peripherals, and compact automotive electronics. The 8-pin SOIC package supports conventional surface-mount assembly while keeping the design footprint small for entry-level embedded systems. The primary design checks are supply voltage, pin multiplexing, clock configuration, memory limits, and peripheral availability. Do not infer a pin function from the family name alone; use the exact package pinout and datasheet for S9S08SG4E2CSC. The verified data does not provide a full pin mapping or electrical timing table. This page consolidates verified distributor and manufacturer information, explicit missing-data markers, application context, and selection guidance so engineers can evaluate the part without treating unverified specifications as facts.

見積もり 在庫あり
S9S08SG4E2CTJ - 8-bit MCU, 4KB Flash, 40MHz, TSSOP-20 | NXP
S9S08SG4E2CTJ

S9S08SG4E2CTJ - 8-bit MCU, 4KB Flash, 40MHz, TSSOP-20 | NXP

The NXP S9S08SG4E2CTJ is an 8-bit microcontroller from the S08SG family featuring an HCS08 CPU core running up to 40 MHz, 4 KB of Flash program memory, and 256 B of RAM, housed in a 20-pin TSSOP package. It is qualified to the automotive AEC-Q100 standard and operates over a -40 °C to +85 °C ambient range (with select variants rated up to +150 °C ambient) on a 2.7 V to 5.5 V supply. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash for program code and RAM for working data), peripherals such as timers, ADCs, and communication interfaces, and I/O pins into one package. The S08SG family sits at the entry-level to mid-range of NXP's 8-bit S08 portfolio — below 32-bit Kinetis devices in performance but optimized for cost-sensitive, space-constrained, and LIN-slave automotive body electronics. Key features include an HCS08 core with 40 MHz CPU clock (36 MHz above 125 °C), 4 KB Flash with security, 256 B RAM, an internal clock source, multiple timers (TPM, RTI), ADC, SCI/SPI/I2C communication peripherals, and a low-power STOP mode. The part supports up to 32 interrupt/reset sources and includes a Background Debug Mode (BGND) instruction for in-circuit debugging. The S9S08SG4E2CTJ's HCS08 core is fully object-code compatible with the legacy HC08 instruction set, easing migration for designs upgrading from older HC908 parts. Built-in security and an SCI multiplier (used for LIN-suitable baud-rate generation) make it well-suited to body controllers and slave-node LIN applications. Typical applications include automotive body electronics such as door modules, seat controllers, and LIN slave nodes, as well as space-constrained industrial sensor interfaces, appliance controls, and small-form-factor white goods. AEC-Q100 qualification makes it attractive for non-safety-critical vehicle body domains. When designing with this part, allocate sufficient decoupling (0.1 µF + bulk) on VDD and place the TSSOP-20 thermal copper pad area to share ground with the MCU. Verify LIN transceiver choice against the bus capacitance budget — internal pull-ups and slope control depend on the chosen external transceiver. This page synthesizes distributor pricing, drop-in TSSOP-20 alternatives, and practical design notes not found in the manufacturer datasheet.

USD $1.85 在庫あり