S9S08EL32F1CTJ - HCS08 32KB Flash MCU 144-LFQFP | NXP
部品番号: S9S08EL32F1CTJ ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $7.85 | $7.85 |
| 10 | $7.2 | $72.00 |
| 100 | $6.45 | $645.00 |
| 500 | $5.8 | $2,900.00 |
| 1,000 | $5.25 | $5,250.00 |
S9S08EL32F1CTJ 概要
A microcontroller (MCU) is a single-chip computational platform that integrates a CPU, program memory (Flash or ROM), data memory (RAM), and programmable peripheral interfaces (ADC, PWM, timers, communication controllers) on a single die. Within the broader semiconductor taxonomy, an MCU belongs to the class of embedded processors, which also includes microprocessors (MPUs) and digital signal controllers (DSCs). The 8-bit MCU category, exemplified by HCS08 cores, prioritizes deterministic I/O response, ultra-low standby power, and aggressive cost reduction over raw arithmetic performance, making it the workhorse of mass-production appliances, sensor nodes, and industrial controllers. The S9S08 sub-family specifically pairs the HCS08 core with Freescale/NXP's enhanced analog front-end to address cost-sensitive motor-control and white-goods designs.
Key features of the S9S08EL32F1CTJ include 32 KB of embedded Flash with security lock, 1 KB of SRAM, multiple 16-bit timers/PWM channels suitable for three-phase motor control, an analog comparator for current sensing or zero-crossing detection, on-chip debug and programming support via the BDM interface, and a low-power operating mode set optimized for battery-backed and energy-conscious appliances. The wide supply voltage tolerance supports both 3.3V and 5V system rails commonly used in industrial and consumer embedded designs.
Architecturally the device pairs a single-cycle HCS08 instruction pipeline with on-chip analog peripherals including a multi-channel ADC, enabling accurate sensor sampling without external components. The integrated PWM module with dead-time insertion and fault inputs simplifies three-phase inverter design, reducing the BOM count and shortening firmware development cycles for BLDC, PMSM, and AC-induction drive applications in the sub-1 kW power range.
Typical applications include household appliance motor control (washing machines, dishwashers, refrigerators, range hoods), HVAC fan and compressor drivers, low-cost industrial sensor terminals, and consumer white goods requiring SPI-communication-based user interfaces. The combination of small Flash footprint, integrated peripherals, and the LFQFP-144 package footprint makes it well matched to compact PCBAs where space and cost are at a premium.
Designers should evaluate the full S9S08EL32 family datasheet for memory-map details, peripheral allocation, and BDM programming sequence before committing the pinout. The 144-pin LFQFP package requires careful PCB footprint tolerance and via-in-pad consideration for reliable manufacturing.
This page synthesizes distributor stock and pricing data, lifecycle status, drop-in alternatives from the same S9S08EL family, and practical engineering guidance not consolidated in the manufacturer datasheet, helping sourcing engineers rapidly assess whether this legacy NXP MCU meets their cost, performance, and supply-chain requirements.
ドロップイン代替品: S9S08EL32F1CTJ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: S9S08EL32F1CTJ （同一形状・フットプリント） — 相違点: Core Processor, Connectivity, Package, Program Memory Size, RAM Size.
クイック比較ツール — 並列比較する代替部品を選択:
S9S08EL32F1MTL
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$3.15 / 個
データシートを見る →MC9S08EL32F1CTJ
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
S9S12H256J2VFVER
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
価格はお問い合わせください
データシートを見る →MCF51MM256VMB
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$7.2 / 個
データシートを見る →MCF52211CAF80
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
価格はお問い合わせください
データシートを見る →S9S08EL32F1CTJ 最大定格＆電気的特性
| Product Type | 8-bit Microcontroller (MCU) |
| Core Family | HCS08 |
| Program Memory (Flash) | 32 KB |
| Data Memory (RAM) | 1 KB |
| CPU Core | Freescale/NXP HCS08, 8-bit |
| Package Type | 144-pin LFQFP (FJ-type) |
| Package Code | LFQFP |
| Terminal Form | GULL WING |
| Package Shape | SQUARE |
| 動作温度範囲 | -40 C to +85 C |
| Communication Interfaces | SPI |
| 実装タイプ | Surface Mount |
| On-Chip Analog Comparator | Yes |
| On-Chip Debug | BDM (Background Debug Mode) |
S9S08EL32F1CTJ square ピン配置ガイド
S9S08EL32F1CTJ (square パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: S9S08EL32F1CTJ.
詳細は データシート をご参照ください。
主な用途
S9S08EL32F1CTJ の用途: 6 件s: Appliance Motor Control (BLDC/PMSM), HVAC Fan and Compressor Drivers, White Goods Control Board, Low-Cost Industrial Sensor Terminal, Consumer Electronics User Interface Controller, Battery-Backed Appliance Timer Module.
Appliance Motor Control (BLDC/PMSM)
The S9S08EL32F1CTJ's HCS08 8-bit core, integrated 16-bit timers with PWM and dead-time insertion, fault inputs, and on-chip analog comparators make it well-suited to three-phase brushless DC and PMSM motor drives in washing machines, dishwashers, refrigerators, and range hoods. With 32 KB of Flash it accommodates BLDC commutation tables, FOC control loops, and user-interface handlers in a single chip. Designers place the MCU on the control board with gate-driver ICs and current-sense amplifiers, exploiting the SPI interface to communicate with companion display or sensor modules.
おすすめ
HVAC Fan and Compressor Drivers
The S9S08EL32F1CTJ's combination of 32 KB Flash, integrated PWM generators and analog comparators suits HVAC fan and compressor variable-speed drives. The HCS08 core executes PI speed-control loops while the PWM module drives the inverter at frequencies suitable for sensorless BLDC commutation. The -40 C to +85 C industrial operating range handles indoor equipment environments, and the LFQFP-144 footprint exposes enough GPIO for power-factor-correction handshake signals, status LEDs, and serial debug interfaces.
おすすめ
White Goods Control Board
White-goods control boards use the S9S08EL32F1CTJ to consolidate user inputs (buttons, rotary encoders), sensor sampling (temperature, water-level, door switches), and motor or heater actuation in a single cost-optimized MCU. Its 1 KB SRAM accommodates the modest data buffers needed for sensor fusion and UI state machines, while 32 KB Flash stores the appliance state machine and diagnostic logs. SPI enables connection to LED-driver or character-display modules on the same PCB.
おすすめ
Low-Cost Industrial Sensor Terminal
In compact industrial sensor terminals, the S9S08EL32F1CTJ samples analog inputs via its on-chip ADC, performs basic linearization, and forwards results over SPI to a host controller or gateway. With 32 KB Flash and 1 KB RAM it handles local filtering, alarm thresholds, and self-test routines typical of process-monitoring endpoints. The 144-pin LFQFP exposes sufficient I/O for multi-channel sensor conditioning and discrete status LEDs.
おすすめ
Consumer Electronics User Interface Controller
The S9S08EL32F1CTJ serves as a UI controller in consumer electronics, scanning keypads or rotary inputs, driving indicator LEDs over GPIO, and communicating with the main application processor over SPI. The HCS08's deterministic interrupt response guarantees button-debounce and timing accuracy needed for responsive user interfaces. The wide supply tolerance lets the same design support 3.3 V and 5 V mainboards.
おすすめ
Battery-Backed Appliance Timer Module
The S9S08EL32F1CTJ's low-power modes and 32 KB Flash suit battery-backed timer modules in smart appliances and standby controllers that must retain time-of-day, schedule, and diagnostic state across mains dropouts. The HCS08 core executes minimal run-time code while waiting on interrupts from a 32 kHz source, drawing micro-amp standby currents typical of S9S08EL family parts. SPI linkage to companion RTC or nonvolatile memory ICs extends the platform's persistence.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: S9S08EL32F1CTJ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | S9S08EL32F1MTL | MC9S08EL32F1CTJ | S9S12H256J2VFVER |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 144-pin LFQFP | Same family variant package | 144-pin LFQFP - same | 144-pin family class |
| CPU Core | HCS08 8-bit | HCS08 8-bit - same | HCS08 8-bit - same | S12 16-bit upgrade |
| Flash Memory | 32 KB | 32 KB - same | 32 KB - same | 256 KB upgrade |
| RAM | 1 KB | 1 KB - same | 1 KB - same | 12 KB upgrade |
| Lifecycle Status | NRND | NRND | Legacy/Discontinued | Active |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +125 C |
| Communication Interface | SPI | SPI - same | SPI - same | SPI, SCI, CAN |
主な差別化要因
- HCS08 deterministic 8-bit core （vs S9S12H256J2VFVER)
- Integrated analog comparator （vs MC9S08SH4MFK)
- Wide package pin count for full peripheral access （vs MC9S08DV128MLF)
設計ノート
The S9S08EL32F1CTJ in 144-pin LFQFP has a moderate thermal resistance typical for this package class; for designs that drive the part near full GPIO load with sustained high CPU activity, follow the manufacturer's PCB layout guidelines including a thermal pad tied to the ground plane. For motor-control applications where the MCU sits near power-driver stages, provide adequate copper area around the LFQFP and isolate the analog ground return path to avoid ADC noise injection.
Place decoupling capacitors (100 nF and 4.7 uF) as close as possible to every VDD pin pair of the LFQFP-144. Use a solid ground plane under the device to support the high-frequency switching transients typical of motor-control applications. Minimize trace lengths to the BDM (BKGD/MS) connector to keep debug programming reliable in production.
Because the S9S08EL32F1CTJ is in NXP NRND status, do not start new high-volume designs with this part without securing a long-term supply agreement or planning a migration path to a Kinetis or S12 alternative. Always validate flash endurance (typically 10k cycles) for applications requiring frequent firmware updates, and ensure the BDM security bits are configured correctly to prevent unauthorized firmware readout in deployed products.
コンプライアンス情報
Compliance status not explicitly stated in the verified distributor or product page extracts; manufacturer datasheet should be consulted for definitive RoHS/lead-free declarations. Automotive AEC-Q100 qualification is not indicated in distributor listings - this part is for industrial/consumer appliance use.
