マイクロコントローラ

製品 (20,000+)

MCIMX6X2CVN08AB - i.MX 6SoloX 800MHz Cortex-A9 + 166MHz Cortex-M4 MPU | NXP
MCIMX6X2CVN08AB

MCIMX6X2CVN08AB - i.MX 6SoloX 800MHz Cortex-A9 + 166MHz Cortex-M4 MPU | NXP

The NXP MCIMX6X2CVN08AB is an i.MX 6SoloX applications processor from the i.MX 6 family, integrating a single ARM Cortex-A9 core running at 800 MHz and an ARM Cortex-M4 core at 166 MHz in a 400-ball MAPBGA (17x17 mm) package. As the first device combining Cortex-A9 and Cortex-M4 on a single SoC, it delivers asymmetric multiprocessing for mixed application/real-time workloads in industrial, automotive infotainment, and HMI designs. An applications processor (AP) is a system-on-chip (SoC) class integrated circuit designed to run an operating system and execute complex user-facing workloads, integrating CPU cores, graphics, multimedia, and I/O on a single die. Within the i.MX hierarchy, the 6SoloX sits between the lower-cost i.MX 6ULL (single Cortex-A7) and the higher-end i.MX 6Quad (quad Cortex-A9), offering heterogeneous A9+M4 computing in a cost-effective single-core A9 configuration. The integrated Cortex-M4 enables deterministic real-time tasks (sensor fusion, motor control, IO link management) without burdening the A9 application core. Key features include 32 KB L1 instruction and data caches per core, 128 KB L2 cache, NEON SIMD media engine, multi-standard video codecs (MPEG-4, H.264, MJPEG), 2D/3D GPU acceleration (GC320 + GC880), dual-display support up to WXGA, dual GbE, two USB 2.0 with PHY, three SD card controllers, and LPDDR2/LVDDR3/DDR3 memory interface. Security is provided by HAB (High Assurance Boot), SNVS, and on-chip crypto acceleration. The SoC targets industrial temperature grades (-40C to +105C TJ). Architecture combines heterogeneous computing with NXP's Smart System Power Management (SSPM) enabling per-domain power gating and DVFS. Manufacturing is done on a 40 nm low-power CMOS process, providing the performance-per-watt envelope required for fanless industrial designs. Multimedia acceleration offloads video encode/decode from the CPUs, freeing the A9 core for application logic. Typical applications include industrial HMI panels, building automation gateways, IoT edge controllers, automotive infotainment head units, and telehealth devices. The dual-core A9+M4 split allows real-time sensor handling on the M4 while the A9 runs Linux for graphics and connectivity stacks. When designing with this part, use the SABRE platform reference design and configure boot mode pins for the desired flash interface. Provide a clean 1.8V/2.5V/2.8V/3.15V I/O supply; decoupling per NXP hardware design guide is mandatory to meet SoC power-up sequencing requirements. This page synthesizes distributor pricing, lifecycle status, and drop-in alternative analysis not consolidated in the manufacturer datasheet.

見積もり お問い合わせ
MCIMX6X2CVN08AC - i.MX 6SoloX A9+M4 SoC 800MHz | NXP
MCIMX6X2CVN08AC

MCIMX6X2CVN08AC - i.MX 6SoloX A9+M4 SoC 800MHz | NXP

The NXP MCIMX6X2CVN08AC is a heterogeneous multicore applications processor from the i.MX 6SoloX family, combining an ARM Cortex-A9 core running up to 800 MHz with an ARM Cortex-M4 core running up to 200 MHz on a single die, packaged in a 400-ball 17x17 mm MAPBGA. The part targets consumer, industrial, and automotive infotainment applications that benefit from running a rich OS (Linux/Android) on the A9 alongside a real-time microcontroller workload on the M4. An applications processor (AP) is a system-on-chip (SoC) that integrates one or more CPU cores, graphics, memory controllers, and a wide peripheral set into a single device, allowing it to run an entire product without external compute. Heterogeneous multicore SoCs such as the i.MX 6SoloX add a secondary microcontroller class core so latency-critical tasks (motor control, sensor fusion, CAN stack) can be serviced deterministically while the application processor handles the user interface, networking, and multimedia pipeline. This i.MX 6SX variant belongs to NXP's i.MX 6 family, which sits within NXP's EdgeVerse Edge Processing portfolio for secure connected devices. Key features include dual-core heterogeneous compute (Cortex-A9 up to 800 MHz plus Cortex-M4 up to 200 MHz), integrated 2D/3D graphics acceleration, dual MIPI display and camera interfaces, dual Gb Ethernet (one with IEEE 1588 support), dual USB 2.0 with PHY, dual CAN, PCIe, and a 32-bit LPDDR2/DDR3/DDR3L memory controller. Security features include secure boot, high assurance boot (HAB), cryptographic accelerators (AES, SHA, RSA), and tamper detection. The device is qualified over the -40C to +105C industrial temperature range. The A9 core integrates NEON SIMD media engine and VFPv3 floating point, while the M4 core provides single-precision FPU, MPU, and deterministic interrupt latency suited for real-time control. The platform integrates an LCDIF display controller, a Vivante GC400T 2D/3D GPU, an Image Processing Unit (IPU), and a Video Processing Unit (VPU) for H.264 1080p30 decode. On-chip SRAM plus flexible boot from NAND/NOR/SD/eMMC/QSPI simplifies system design. Typical applications include human-machine interface (HMI) panels, industrial IoT gateways, building automation controllers, automotive infotainment head units, point-of-sale terminals, and printer/scanner controllers. The Cortex-M4 coprocessor makes the device especially attractive for products that previously required a discrete MCU paired with an applications processor. When designing with the i.MX 6SoloX, ensure the PCB has a 4-layer stackup with continuous ground beneath the BGA to manage thermal dissipation and to provide low-impedance return paths for high-speed LPDDR2/DDR3 signals. Use NXP's MCIMX6SX-SDB reference design as the baseline schematic and layout; software should target the official i.MX 6 BSP (board support package) from NXP. This page synthesizes distributor pricing, drop-in same-package alternatives, and design references not always visible on the manufacturer product page.

見積もり お問い合わせ
MCIMX6X3CVO08AB - i.MX 6SoloX A9+M4 MPU 800MHz | NXP BGA-400
MCIMX6X3CVO08AB

MCIMX6X3CVO08AB - i.MX 6SoloX A9+M4 MPU 800MHz | NXP BGA-400

The NXP MCIMX6X3CVO08AB is an i.MX 6SoloX applications microprocessor featuring a heterogeneous dual-core architecture combining an ARM Cortex-A9 core running up to 800 MHz with an ARM Cortex-M4 core running up to 200 MHz, packaged in a 400-ball MAP-BGA (17 mm x 17 mm). The part is designed for secure, connected homes and vehicles, integrating multimedia, connectivity, and real-time control on a single 40 nm SoC. An applications processor (AP) is a system-on-chip (SoC) that integrates a CPU complex, graphics, memory controllers, and a rich peripheral set into one device for running an operating system alongside real-time tasks. The i.MX 6SoloX belongs to NXP's i.MX 6 family of ARM Cortex-A series application processors, specifically the heterogeneous multicore family that pairs an application processor with a microcontroller class core for deterministic real-time response. This places 6SoloX in the broader NXP i.MX portfolio positioned between the i.MX 6Solo (single A9) and i.MX 6DualLite (dual A9) variants, optimised for low-power connected applications. Key features of the MCIMX6X3CVO08AB include the dual-core A9+M4 heterogeneous compute, hardware security accelerators (including ARM TrustZone, secure boot, RSA, and AES), dual Gigabit Ethernet controllers with IEEE 1588 timestamping, two USB 2.0 controllers (one with HS PHY), three PCIe Gen 2.0 lanes, two CAN interfaces, an LCD controller, MIPI-CSI and MIPI-DSI interfaces, and a 32-bit DDR3/LPDDR2 memory controller. The SoC supports a wide operating temperature range suitable for industrial and automotive environments. The Cortex-A9 core runs a Linux/Bootloader, while the Cortex-M4 runs RTOS/bare-metal real-time tasks, allowing clean isolation of control loops from rich application code. Integrated graphics (Vivante GC400T) provide 2D/3D/OpenGL ES acceleration, while dedicated cryptography engines offload AES, SHA, and RNG workloads. Power management is handled by an integrated PMU with multiple voltage domains and DVFS capability. Typical applications include industrial HMI and IoT gateways, automotive infotainment head-units, secure connected home hubs, medical patient monitors, and ruggedised portable terminals. The dual Gigabit Ethernet plus PCIe combination suits industrial control and machine vision, while the CAN controllers target automotive body and chassis networks. Design consideration: pay attention to PCB routing of the 17x17 mm BGA-400 footprint - a 6-layer board with controlled-impedance DDR3 routing and solid power decoupling is mandatory. For boot configuration, strap pins define the boot source and must be pulled correctly during reset. This page synthesises distributor pricing, same-package i.MX 6SoloX drop-in alternatives (commercial and extended-temperature variants), and PCB design considerations not all collected on a single manufacturer page.

見積もり お問い合わせ
MCIMX6X3EVO10AB - i.MX 6SoloX ARM A9/M4 MPU | NXP
MCIMX6X3EVO10AB

MCIMX6X3EVO10AB - i.MX 6SoloX ARM A9/M4 MPU | NXP

The NXP MCIMX6X3EVO10AB is an i.MX 6SoloX applications processor featuring a heterogeneous multicore architecture that combines an ARM Cortex-A9 core at up to 800 MHz (turbo to 1 GHz) with an ARM Cortex-M4 core at up to 227 MHz, packaged in a 400-ball MAPBGA (17 mm x 17 mm). It integrates dedicated interfaces for secure connected homes, industrial HMI, and automotive infotainment, with on-chip GPU acceleration, display controllers, and rich connectivity including dual CAN, dual Ethernet, and USB. An applications processor (AP) is a system-on-chip (SoC) class integrated circuit designed to run a full operating system such as Linux, Android, or QNX, as opposed to a microcontroller which typically runs bare-metal or an RTOS. The i.MX 6SoloX sits in the i.MX 6 family hierarchy between the i.MX 6UltraLite (Cortex-A7 only, low power) and the i.MX 6Dual/6Quad (Cortex-A9 multicore) variants. The asymmetric A9 + M4 combination allows real-time deterministic tasks to be isolated from the application OS, a topology commonly used in industrial IoT gateways, telematics control units, and secure HMI panels where functional safety and responsiveness co-exist with rich graphics. Key features of the MCIMX6X3EVO10AB include 32 KB I-cache and 32 KB D-cache on the Cortex-A9, NEON SIMD media engine, hardware accelerated 2D/3D graphics via the Vivante GC400T GPU, dual-port Display Controller and LCDIF supporting up to 1080p, dual CAN-FD, dual 10/100/1000 Gigabit Ethernet with AVB, two USB 2.0 controllers with PHYs, three SD/MMC ports, and PCIe 2.0. Hardware security is provided through ARM TrustZone, secure boot, and on-chip crypto accelerators (AES, SHA, DES). Architecturally the SoC pairs the high-throughput A9 out-of-order pipeline for the application OS and graphical user interface with the deterministic M4 for hard-real-time I/O handling - a layout that lets a single chip replace what would otherwise be an MPU plus a separate MCU. The part supports -40C to +105C Tj operation, suiting industrial and automotive cabinet environments, and uses NXP's 40 nm low-power process. Typical applications include automotive infotainment head units, industrial HMI panels with touch + secure boot, telematics control units, smart energy gateways, and connected home control hubs requiring real-time fieldbus + a Linux application layer. Drop-in same-package variants such as the MCIMX6X3EVN10AB (industrial temp grade variant within the same die family) and MCIMX6X2EVN10AB (related 6DualLite-class in the same 400-MAPBGA) allow board reuse when the temperature grade or core count changes. When designing with this device, ensure the PCB follows NXP's hardware design guide for the 17 mm x 17 mm MAPBGA, including microvia stack-up, length-matched DDR3 routing, and a reference clock distribution that meets the jitter mask for ENET. Software bring-up requires selecting the correct boot configuration (eFuses vs SD card) and validating TrustZone partition between A9 and M4 address spaces. This page synthesises authorised distributor pricing, same-package drop-in alternatives in the same NXP i.MX 6 series, and practical bring-up notes not found in the standalone datasheet PDF.

見積もり お問い合わせ
MCIMX6X4CVM08AC - i.MX6SX A9+M4 SoC 800MHz 529-MAPBGA | NXP
MCIMX6X4CVM08AC

MCIMX6X4CVM08AC - i.MX6SX A9+M4 SoC 800MHz 529-MAPBGA | NXP

The NXP MCIMX6X4CVM08AC is an i.MX 6SoloX applications processor integrating one ARM Cortex-A9 core (up to 800 MHz) and one ARM Cortex-M4 core (up to 200 MHz) in a 529-pin MAPBGA (19x19 mm) package. It belongs to NXP's i.MX 6 family of heterogeneous multicore SoCs designed for industrial-grade multimedia, HMI, and real-time control applications, with 32-bit processing and on-chip peripherals for graphics, connectivity, and sensor fusion. An SoC (System-on-Chip) integrates CPU cores, GPU, memory controller, and I/O peripherals onto a single die, enabling compact embedded designs. Heterogeneous multicore SoCs pair a high-performance application core (Cortex-A9, capable of running Linux) with a low-power real-time core (Cortex-M4, capable of bare-metal/RTOS control) on the same silicon, eliminating the need for a discrete MCU companion. Within NXP's taxonomy this part sits under i.MX 6 family -> i.MX 6SoloX sub-family -> industrial applications processor category. Key features include up to 800 MHz Cortex-A9 with Neon SIMD, up to 200 MHz Cortex-M4 with FPU, integrated 2D/3D GPU (Vivante GC400T), 24-bit parallel LCD interface, dual CAN, dual USB, dual Ethernet, and an industrial-grade operating temperature range. The SoC also includes hardware cryptographic acceleration, multiple ADC channels, and a flexible boot architecture supporting eMMC, SD, NAND, and SPI flash. The heterogeneous architecture allows Linux to run on the Cortex-A9 while the Cortex-M4 executes deterministic real-time control loops, sensor I/O, or low-latency motor control. Shared OCRAM (on-chip SRAM) provides fast inter-core data exchange via a hardware semaphore mechanism. This architecture is well-suited to industrial automation, where deterministic response times must coexist with rich HMI/connectivity stacks. Typical applications include industrial HMI panels, factory automation controllers, smart energy gateways, building automation, machine vision edge nodes, and ruggedized IoT gateways. The industrial temperature rating and long-lifecycle NXP program make this part appropriate for designs requiring 10+ year availability. When designing with this part, pay attention to PCB layout: the 529-ball MAPBGA requires microvia stack-up and controlled-impedance routing for DDR3/LPDDR2 traces. Power-rail sequencing between A9 and M4 cores must follow NXP reference manual guidelines to avoid latch-up during cold-start. The 'AC' suffix in the part number denotes the 800 MHz / 200 MHz speed grade with industrial-grade temperature range (-40C to +105C Tj). This page synthesizes distributor pricing, datasheet pinout, and same-package alternatives not bundled in the official datasheet, enabling faster PCB bring-up and sourcing decisions.

見積もり お問い合わせ
MCIMX6X4EVM10AB - i.MX 6SoloX A9+M4 MPU, 1GHz/227MHz, MAPBGA-529
MCIMX6X4EVM10AB

MCIMX6X4EVM10AB - i.MX 6SoloX A9+M4 MPU, 1GHz/227MHz, MAPBGA-529

The NXP MCIMX6X4EVM10AB is an i.MX 6SoloX applications processor in the i.MX 6 family, integrating an ARM Cortex-A9 core running up to 1 GHz alongside an ARM Cortex-M4 core running up to 227 MHz in a 529-pin MAPBGA package (19x19 mm, 0.8 mm pitch). It is the first device in the i.MX 6 family to combine heterogeneous asymmetric multiprocessing (AMP) on Cortex-A9 + Cortex-M4 in a single SoC. The part supports industrial operating conditions with an extended temperature range, multiple display and connectivity interfaces, and hardware cryptography acceleration. A microprocessor (MPU) is a single-chip computer integrating CPU cores, memory controllers, peripherals, and I/O on one die. The i.MX 6SoloX sits within the ARM Cortex application-processor taxonomy (Cortex-A = application, Cortex-M = microcontroller) and the broader embedded processor hierarchy: MPU -> SoC -> semiconductor. Its heterogeneous A9+M4 architecture allows real-time control tasks on Cortex-M4 while Linux/Android runs on Cortex-A9, a common pattern in industrial HMI and IoT gateways. Key features include dual-core heterogeneous processing (A9 up to 1 GHz, M4 up to 227 MHz), hardware-accelerated graphics (GC400T-like 2D/3D via the GPU block), dual Gigabit Ethernet with IEEE 1588 support, two USB 2.0 ports (one with PHY), PCIe 2.0, multiple display interfaces (LCD, LVDS), ECC on DDR3/LPDDR2 memory interface, and hardware cryptographic accelerators (AES, SHA, RNG). Industrial-grade temperature range and AEC-Q100 awareness make it suitable for harsh-environment products. The 6SoloX architecture pairs a high-throughput A9 application core with a deterministic M4 real-time core, communicating through shared OCRAM and message-unit interrupts. This AMP design lets OEM code time-critical motor or sensor loops on Cortex-M4 while running a rich OS on Cortex-A9 without RTOS jitter. ECC-protected external memory and hardware crypto offload improve reliability for industrial and edge-compute designs. Typical applications include industrial HMI panels, building automation controllers, smart energy gateways, automotive infotainment companions, IoT edge nodes, and point-of-sale terminals. The dual-Ethernet + dual-USB + PCIe combination also targets connected industrial routers and ruggedized tablets. Automotive and consumer-grade siblings share the silicon but differ in qualification and feature mix. When designing with this MPU, allocate proper PCB layer stack for the 529-ball MAPBGA with 0.8 mm pitch and follow NXP's Hardware Design Guide for DDR3/LPDDR2 routing. Power sequencing of the multiple supply rails must follow the datasheet power-up sequence to avoid latch-up, and unused interfaces should be tied per the reference schematic.

見積もり お問い合わせ
MCIMX6Y0CV05AA - i.MX 6ULL ARM Cortex-A7 MPU 528MHz | NXP
MCIMX6Y0CV05AA

MCIMX6Y0CV05AA - i.MX 6ULL ARM Cortex-A7 MPU 528MHz | NXP

The NXP MCIMX6Y0CV05AA is an i.MX 6ULL applications processor integrating a single ARM Cortex-A7 core running up to 528 MHz, designed for cost-sensitive, power-efficient embedded applications. It is offered in a 289-ball MAPBGA package (14x14 mm, 0.8 mm pitch) and is part of NXP's broad i.MX 6 family aimed at IoT gateways, consumer HMI, industrial control, and connected appliances. An applications processor (AP) is a system-on-chip (SoC) class microprocessor built around one or more high-performance CPU cores, tightly integrated with on-chip memory controllers, graphics/video accelerators (when present), and a wide peripheral set. The i.MX 6ULL sits at the low-power, low-cost end of the i.MX 6 hierarchy (i.MX 6ULL -> i.MX 6 -> applications processor -> microprocessor -> MPU -> semiconductor), giving designers Cortex-A7 performance at Cortex-M-class system cost and power. The 528 MHz Cortex-A7 core supports the ARMv7-A instruction set including NEON, providing ample headroom for Linux (with the appropriate commercial-grade silicon revision) and resource-constrained RTOS deployments. Key features of the MCIMX6Y0CV05AA include a 32-bit LPDDR2/DDR3/LPDDR3 memory controller, 8-channel 12-bit ADC (for industrial sensing), dual 10/100 Mbit Ethernet MACs with hardware QoS, dual USB 2.0 OTG controllers, multiple UART/SPI/I2C/CAN interfaces, and an integrated LCD controller supporting up to WXGA resolution. The 'CV05' ordering code identifies the commercial temperature grade (0C to +95C junction) with specific peripheral and security configuration, while the 'AA' suffix denotes the standard feature set (versus secure-boot or specialised revisions). Hardware-virtualization, TrustZone, and tamper-monitoring features vary by sibling part numbers in the family. Architecturally, the Cortex-A7 core is paired with an ARM Cortex-M4 (in some 6ULL variants) or used stand-alone for power-optimised Linux. The chip is fabricated in a low-power process and supports dynamic voltage and frequency scaling (DVFS) with multiple power domains, enabling deep-sleep currents in the single-digit milliamp range - ideal for battery-backed IoT devices. Typical applications include IoT edge gateways, smart-home appliances, industrial HMI panels, point-of-sale terminals, healthcare monitoring devices, energy/building automation controllers, and connected printers. The on-chip LCD controller makes it particularly well suited to WXGA-resolution colour touch panels without an external GPU. When designing with this device, pay close attention to PCB power-tree design: the i.MX 6ULL needs multiple rails (VDD_SOC, VDD_ARM, VDD_DRAM, etc.) with strict sequencing, and the 289-ball MAPBGA package requires microvia or via-in-pad PCB technology for reliable assembly.

見積もり お問い合わせ
MCIMX6Y0CVM05AA - i.MX 6ULL 528MHz ARM Cortex-A7 MPU | NXP
MCIMX6Y0CVM05AA

MCIMX6Y0CVM05AA - i.MX 6ULL 528MHz ARM Cortex-A7 MPU | NXP

The NXP MCIMX6Y0CVM05AA is a single-core ARM Cortex-A7 application processor from the i.MX 6ULL family, operating at up to 528 MHz and housed in a 289-ball MAPBGA package (14x14 mm, 0.8 mm pitch). It integrates one Cortex-A7 core with 32-bit datapath, NEON media engine, and the standard i.MX 6ULL peripheral set including 10/100 Ethernet MAC, USB OTG, four UARTs, two I2C, two SPI, four PWM channels, two timers, one SAI and one ESAI audio interface, plus a 10-bit ADC. An application processor is a system-on-chip (SoC) that integrates a CPU core, memory controllers, and a wide peripheral mix into a single die, allowing designers to build complete embedded platforms without a companion northbridge. Within NXP's portfolio, the i.MX 6ULL sits in the ultra-low-power entry of the i.MX 6 series, targeting cost-sensitive Linux and RTOS designs that need Cortex-A7 class performance at sub-1 W power envelopes. Key features include hardware ECC on NAND and DDR interfaces, dual CAN-FD controllers, a hardware cryptography accelerator (CAAM block on related family members), a 24-bit LCD controller, and an integrated PMU that supports dynamic voltage and frequency scaling. The part operates from a 1.2 V to 1.26 V core supply plus a 1.325 V to 1.5 V I/O supply, and is qualified over the -40 C to +105 C industrial temperature range. Typical applications include human-machine interface (HMI) panels, industrial point-of-sale terminals, low-end gateways, eReaders, smart-home hubs, building automation controllers, and portable medical data loggers. The combination of low BOM cost, deterministic Cortex-A7 performance, and a mature Linux BSP (mainline U-Boot and kernel support) makes it a workhorse for Linux-based edge devices. When designing with the MCIMX6Y0CVM05AA, allocate a four-layer PCB with a continuous ground plane beneath the MAPBGA, follow NXP's AN5397 power-sequencing recommendations, and budget thermal dissipation for 1 W typical workloads. Decoupling must follow the reference design's capacitor matrix; do not substitute the PMIC without re-running the power-tree analysis.

見積もり お問い合わせ
MCIMX6Y1CVK05AB - i.MX 6ULL ARM Cortex-A7 MPU 528MHz | NXP
MCIMX6Y1CVK05AB

MCIMX6Y1CVK05AB - i.MX 6ULL ARM Cortex-A7 MPU 528MHz | NXP

The NXP Semiconductors MCIMX6Y1CVK05AB is a power-efficient, cost-optimized i.MX 6ULL applications processor built around a single ARM Cortex-A7 core running at up to 528 MHz, housed in a 272-ball MAPBGA (9x9 mm) package. It integrates 32 KB L1 instruction cache, 32 KB L1 data cache, 128 KB L2 cache, and supports LPDDR2, DDR3, DDR3L, and LPDDR3 memory interfaces, making it suitable for secure, connected industrial and consumer IoT endpoints. An applications processor (AP) is a system-on-chip (SoC) class integrated circuit that integrates a CPU core(s), memory controller, graphics/display controller, and a rich peripheral set into a single die. Within the NXP i.MX family hierarchy, the 6ULL sits below the i.MX 6UL (same core, slightly higher speed grade and feature set), and below the higher-performance i.MX 6SoloX / i.MX 6SoloLite / i.MX 6DualLite / i.MX 6Quad families that scale up to quad-core Cortex-A9 implementations. As a member of the power management IC and microprocessor family, the 6ULL is engineered for low BOM cost and low active/idle power while retaining hardware secure boot, RTC, and display/LCD support. Key specifications include a 32-bit data path, NEON media engine absent on this 'Y1' variant, integrated LCD controller up to WXGA (1366x768) resolution, two 12-bit ADC inputs, two USB 2.0 controllers (one with HS PHY), two CAN-FD ports, two 10/100-Mbit Ethernet MACs with IEEE 1588 support, and hardware cryptographic accelerators (CAAM) plus high-assurance boot (HABv4). The device operates over a -40C to +105C industrial temperature range and supports 1.0 V core / 1.8 V / 3.3 V I/O rails. Typical applications include industrial HMI panels, smart energy gateways, handheld data terminals, point-of-sale terminals, building automation controllers, and consumer IoT hubs. The combination of low power (typical 0.5 W active), small BGA footprint, and integrated secure boot makes the MCIMX6Y1CVK05AB a frequent drop-in choice when designers migrate from STM32MP1 or earlier i.MX28/i.MX6 SoloLite designs. When designing with this part, allocate a 4-layer PCB with continuous GND pour beneath the MAPBGA to control junction temperature and provide clean DDR3/LPDDR2 reference-clock routing. The 272-ball BGA requires NSMD pads with 0.4 mm pitch; non-solder-mask-defined (NSMD) pads with 0.8 mm diameter are recommended per NXP hardware design guide.

見積もり お問い合わせ
MCIMX6Y2DVK09AB - i.MX6ULL 900MHz Cortex-A7 MPU | NXP
MCIMX6Y2DVK09AB

MCIMX6Y2DVK09AB - i.MX6ULL 900MHz Cortex-A7 MPU | NXP

The NXP MCIMX6Y2DVK09AB is an i.MX 6ULL applications processor featuring a single-core ARM Cortex-A7 CPU operating at up to 900 MHz, packaged in a 272-ball MAPBGA (9x9 mm) with ROM Performance Enhanced firmware. The part integrates an advanced power management unit that simplifies external power tree design and sequencing, while supporting industrial temperature operation for embedded use. An applications processor is a system-on-chip (SoC) that integrates a CPU core, memory controller, peripherals, and often graphics and multimedia accelerators onto a single die, replacing what would otherwise require multiple discrete ICs. The i.MX 6ULL belongs to the i.MX family of multimedia applications processors — sitting within the broader taxonomy of microprocessor unit (MPU) > applications processor > ARM Cortex-A system-on-chip. The Cortex-A7 core implements the ARMv7-A architecture with Neon SIMD and VFPv4, supporting symmetric multiprocessing concepts even in this single-core configuration for future scalability within the family. Key features of the MCIMX6Y2DVK09AB include 900 MHz maximum CPU clock, integrated LPDDR2/DDR3/LPDDR3 memory controller, dual Ethernet/Can-bond 10/100 Mbps MAC, USB 2.0 OTG plus USB 2.0 host with PHY, LCD controller up to WXGA, and a wide peripheral set including UART, SPI, I2C, I2S, PWM, and SD/MMC. The integrated PMIC companion interface reduces BOM and PCB area compared with discrete power designs. The ROM Performance Enhanced variant is pre-programmed with NXP ROM firmware that enables fast boot, secure boot, and HAB (High Assurance Boot) on this specific die revision. This part targets cost-sensitive and power-efficient applications: human-machine interface (HMI) panels, IoT edge gateways, e-readers, portable medical, industrial control, and connected consumer devices. The 272 MAPBGA package is optimized for high-density 4-layer PCB designs with thermal performance suitable for fan-less industrial enclosures. When designing with this part, plan power rail sequencing carefully — even with the integrated PMIC companion logic, an external PMIC (such as the NXP PF3000 or PF8100 family) is required for full SoC operation. Decoupling and bulk capacitor selection around the 272-ball BGA is critical; refer to the NXP hardware design guide for the validated stack-up and via pattern.

見積もり お問い合わせ
MCIMX7D2DVM12SD - i.MX 7Dual 1.2GHz ARM Cortex-A7+M4 MPU | NXP
MCIMX7D2DVM12SD

MCIMX7D2DVM12SD - i.MX 7Dual 1.2GHz ARM Cortex-A7+M4 MPU | NXP

The NXP Semiconductors MCIMX7D2DVM12SD is a heterogeneous multicore applications processor from the i.MX 7Dual family, integrating dual ARM Cortex-A7 cores at up to 1.2 GHz alongside a Cortex-M4 real-time core, packaged in a 541-ball MAPBGA (19x19 mm). The A7 cores run a rich operating system such as Linux while the M4 handles low-latency control and sensor fusion, enabling efficient partitioning of system workloads. An applications processor is a system-on-chip (SoC) tailored for embedded computing tasks where high-throughput data processing, graphics, and connectivity converge with deterministic control. Within the broader taxonomy, an applications processor sits above microcontrollers (MCUs) in capability and below full server CPUs, occupying the i.MX -> ARM Cortex SoC -> heterogeneous multicore MPU -> semiconductor hierarchy. The i.MX 7Dual specifically targets low-power, high-integration designs that need both an application processor and a real-time MCU on a single die. Key features include dual-core Cortex-A7 plus Cortex-M4 architecture, NEON media engine, hardware video codecs, dual Gigabit Ethernet with AVB support, dual USB 2.0 with PHY, PCIe, MIPI-CSI/DSI, and a rich set of industrial interfaces (UART, SPI, I2C, I2S, SAI, CAN). The heterogeneous compute fabric lets Linux and RTOS workloads share the same silicon with hardware isolation, which reduces BOM and PCB complexity versus two-chip architectures. The 541-MAPBGA package with 19x19 mm body supports high-speed DDR3L memory interfaces and exposes the full peripheral set, while integrated power management simplifies sequencing for portable and industrial products. Thermal design targets a typical junction range of 0C to +95C for commercial-grade parts, with extended variants available for industrial segments. Typical applications include industrial HMI panels, IoT edge gateways, building automation controllers, point-of-sale terminals, medical patient monitors, automotive infotainment prototypes, and Linux-based human-machine interfaces. The combination of Cortex-A7 multimedia and Cortex-M4 deterministic response suits products that need both a graphical user interface and real-time sensor handling on the same platform. When designing with this part, ensure the PCB supports the 0.8 mm pitch BGA with appropriate via-in-pad or microvia technology, route DDR3L signals with matched-length pairs, and allocate sufficient copper area for the 1.2 GHz core's thermal dissipation. Power rail sequencing must follow the i.MX 7 hardware reference manual for clean boot under all operating modes. This page synthesizes distributor pricing, same-family and cross-brand alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a single reference for evaluation, sourcing, and replacement decisions.

見積もり お問い合わせ
MCIMX7D3DVK10SC557 - i.MX7D 1GHz Dual Cortex-A7 MPU | NXP
MCIMX7D3DVK10SC557

MCIMX7D3DVK10SC557 - i.MX7D 1GHz Dual Cortex-A7 MPU | NXP

The NXP MCIMX7D3DVK10SC557 is a dual-core ARM Cortex-A7 microprocessor from the i.MX 7Dual family, running at up to 1 GHz with an additional ARM Cortex-M4F real-time co-processor, housed in a 488-ball TFBGA (12x12 mm) package. The SoC integrates 2x USB 2.0 OTG with PHY, 1x PCIe Gen 2, 2x SDIO/MMC, and 2x Gigabit Ethernet MACs, with a 1.8V/3.3V I/O voltage domain. An i.MX application processor is a heterogeneous multi-core SoC that combines Cortex-A application cores with Cortex-M real-time cores, targeting low-power connected embedded systems. The i.MX 7Dual sits in NXP's MPU taxonomy between i.MX 6 (single/quad Cortex-A9) and i.MX 8M (Cortex-A53), specifically engineered for power-efficient HMI, IoT gateways, and industrial control products requiring deterministic real-time response. Key features include dual Cortex-A7 cores up to 1 GHz, one Cortex-M4F core up to 200 MHz, integrated security (CAAM, secure boot, TrustZone-Way), NEON SIMD media extensions, and hardware video engines. The 488-TFBGA package provides a 12x12 mm footprint with 0.8 mm ball pitch suitable for high-density 4-layer PCBs. Dynamic voltage scaling (0.95V-1.05V core) enables low-power idle modes below 250 mW. The architecture combines an L1 cache per core (32 KB I-cache + 32 KB D-cache per A7), a unified 512 KB L2 cache, and a 64-bit DDR3/LPDDR2/LPDDR3 memory controller. The heterogeneous topology lets the Cortex-M4F handle real-time sensor sampling while the Cortex-A7 cores run Linux for application logic, eliminating a discrete MCU in many designs. Typical applications include IoT gateways, industrial HMI panels, POS terminals, automotive infotainment secondary displays, and wearable medical devices. The combination of PCIe, dual GbE, and dual USB OTG suits connected appliances and edge nodes that aggregate multiple sensor streams. When designing with this device, ensure the PCB has at least 4 layers with a solid ground plane to manage the 1 GHz core's switching noise. Use NXP's validated DDR3/LPDDR3 reference layout for signal integrity and provide a dedicated 1.25V LPDDR2 termination rail. Decouple each power rail with 100 nF X7R capacitors within 2 mm of the BGA balls. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, and helps engineers evaluate the i.MX 7Dual for power-constrained connected embedded designs.

見積もり お問い合わせ
MCIMX7S3DVK08SC - i.MX 7Solo Cortex-A7/M4 800MHz SoC | NXP
MCIMX7S3DVK08SC

MCIMX7S3DVK08SC - i.MX 7Solo Cortex-A7/M4 800MHz SoC | NXP

The NXP MCIMX7S3DVK08SC is an i.MX 7Solo applications processor integrating a single ARM Cortex-A7 core running up to 800 MHz alongside an ARM Cortex-M4 real-time coprocessor, packaged in a 488-ball TFBGA (12x12 mm). The device targets low-power, secure, connected embedded systems and includes on-chip USB 2.0 OTG with PHY, dual SDIO/MMC interfaces, 10/100 Ethernet MAC, hardware cryptographic accelerators, and a rich set of multimedia peripherals. An applications processor (AP) is a system-on-chip (SoC) that integrates a CPU complex, memory controller, peripherals, and increasingly hardware accelerators into a single die. The i.MX 7Solo belongs to NXP's i.MX family of heterogeneous multiprocessing SoCs, sitting between microcontrollers (single-core, deterministic) and higher-end i.MX 8 application processors. It is widely deployed in industrial HMI, IoT gateways, and portable medical devices where deterministic real-time response must coexist with a Linux-capable application core. Heterogeneous SoCs pair a high-level OS core (Cortex-A7) with a microcontroller-class core (Cortex-M4) on the same silicon, allowing the M4 to handle hard-real-time tasks (motor control, sensor polling, safety) while the A7 runs Linux or Android user-interface workloads. Key features include 32 KB L1 instruction and data caches per core, NEON media processing engine on the A7, single-precision FPU on the M4, integrated LCD controller up to WXGA (1366x768) resolution, and 12-bit ADC channels for sensor integration. Security blocks include ARM TrustZone, secure boot, HAB (High Assurance Boot), and on-chip cryptographic accelerators supporting AES, SHA, and RSA. Power management is handled by an internal PMU that supports low-power sleep modes below 250 uW typical, enabling always-on battery-powered designs. The architecture separates power domains so the Cortex-M4 can operate while the Cortex-A7 is gated off, reducing total system energy in event-driven IoT applications. The combination of Ethernet, USB OTG with integrated PHY, dual SDIO/MMC, and hardware crypto offload eliminates many external companion ICs, lowering BOM cost and PCB complexity. Typical applications include industrial IoT gateways, point-of-sale terminals, portable medical monitors, smart home hubs, and human-machine interface panels. The device supports Linux, Android, and FreeRTOS simultaneously across the heterogeneous cores. When designing with this SoC, follow NXP's Hardware Design Guide for the i.MX 7 family for DDR3L routing and decoupling. Provide at least 4-layer PCB with continuous ground plane beneath the BGA; thermal management is typically passive due to the <1 W typical application power envelope. This page consolidates distributor pricing, drop-in alternative guidance, and practical hardware design notes not found in the i.MX 7 reference manual.

見積もり お問い合わせ
MCL908LJ12CPBE - 8-Bit 8MHz MCU with 12KB Flash | NXP
MCL908LJ12CPBE

MCL908LJ12CPBE - 8-Bit 8MHz MCU with 12KB Flash | NXP

The NXP Semiconductors MCL908LJ12CPBE is an 8-bit HC08 microcontroller rated at 8 MHz, with 12 KB (12K x 8) of Flash memory, supplied in a 64-LQFP (10 x 10 mm) package. It belongs to the MCL908LJ12 low-voltage MCU-EPP family and is intended for embedded control applications requiring a compact 8-bit processor and integrated program memory. A microcontroller is a semiconductor that integrates a CPU core, memory, and peripherals into one device dedicated to embedded control. The HC08 architecture belongs to the broader embedded-processor and microcontroller hierarchy. Compared with a general-purpose processor, this device is optimized for low-cost, low-power control logic rather than desktop computing, high-bandwidth storage, or complex operating systems. The verified product data identifies the core features as an 8-bit architecture, an 8 MHz operating frequency, and 12 KB of Flash organized as 12K x 8. The MCL908LJ12CPBE designation also identifies a low-voltage MCU-EPP configuration and a 64-LQFP package measuring 10 x 10 mm. Exact supply voltage, RAM, peripheral, timer, GPIO, and temperature limits were not provided in the verified dataset and therefore should be confirmed against the manufacturer datasheet before design release. The 8 MHz clock and 8-bit instruction set suit motor-control adjunct logic, panel interfaces, simple sequencers, and factory automation modules where deterministic peripheral-driven behavior is more important than high compute throughput. Its integrated 12 KB Flash also reduces external program-memory requirements on compact boards. The available data does not establish operating-system support, debug interfaces, memory-protection features, or the complete set of communication peripherals. Typical engineering use includes small embedded controllers, sensor-conditioning interfaces, actuator logic, keyboard and display control, and supervisory functions within larger industrial or consumer equipment. The 64-LQFP footprint provides more external connections than a small leadless package, but its 0.5 mm pitch requires careful PCB design, fine-pitch assembly capability, and land-pattern verification. Design decisions should be based on the authoritative device documentation rather than distributor summaries. Confirm the exact clock tree, memory map, electrical limits, reset behavior, peripheral assignments, programming method, and package drawing. Do not infer equivalent pin compatibility from an HC08 family name or the shared 64-LQFP footprint; verify every signal, voltage domain, and exposed-pin function before substitution. This product record consolidates verified distributor specifications, sourcing information, package details, and engineering cautions not presented as a single block elsewhere. It also separates confirmed values from missing technical data, allowing engineers to evaluate the MCL908LJ12CPBE without relying on unsupported memory, timing, or compatibility claims.

見積もり お問い合わせ
MCL908QT1CDWE - 8-Bit 2MHz 1.5KB MCU | NXP
MCL908QT1CDWE

MCL908QT1CDWE - 8-Bit 2MHz 1.5KB MCU | NXP

The NXP Semiconductors MCL908QT1CDWE is an 8-bit HC08-series microcontroller with a 2 MHz operating frequency, 1.5 KB flash memory, and an 8-pin SOIC package. It is intended for compact embedded-control tasks that require a small flash-backed microcontroller and a limited pin count. An 8-bit microcontroller is a programmable semiconductor device designed to execute instructions from embedded firmware and manage digital I/O, timing, and control functions. The HC08 family belongs to the broader embedded-controller hierarchy: MCU, embedded processor, semiconductor, and programmable control device. Its small memory footprint makes it more appropriate for simple control, sensing, and actuator interfaces than for protocol-heavy gateways or high-complexity applications. The verified distributor information identifies the device as an 8-bit MCU, with 1.5 KB organized as 1.5K x 8 flash, a 2 MHz clock specification, and an 8-SO package. Industrial temperature-grade information is also shown by a distributor listing. The part is marked as an HC08 microcontroller and is supplied in a rectangular gull-wing SOP package with eight terminals. Typical design uses include compact appliance controls, simple sensor interfaces, small motor or relay-control boards, status and sequence controllers, and embedded educational systems. The 8-pin package keeps the footprint small, while the 1.5 KB flash capacity favors firmware focused on direct control rather than storage-heavy user interfaces. Engineers should verify memory availability, pin multiplexing, clock requirements, and programming requirements against the manufacturer datasheet before finalizing a design. Because the verified data does not provide a complete electrical timing table, pin-level functions, RAM size, operating voltage, or lifecycle statement, those parameters should not be inferred from similar HC08 devices. The 8-pin package and 2 MHz headline specifications are useful for initial footprint and architecture planning, but firmware and peripheral assumptions require exact datasheet confirmation. This product record combines verified distributor specifications with explicit data gaps for electrical and programming details. It also highlights the importance of checking pin compatibility, supply requirements, memory limits, and tool support before selecting a replacement or creating a production design.

見積もり お問い合わせ
MCL908QY4DWE - 8-Bit HC08 MCU, 4KB Flash, ADC | NXP
MCL908QY4DWE

MCL908QY4DWE - 8-Bit HC08 MCU, 4KB Flash, ADC | NXP

The NXP (formerly Freescale) MCL908QY4DWE is an 8-bit HC08-family microcontroller built around the M68HC08 CISC core, integrating 4KB of on-chip Flash program memory, 128 bytes of RAM, and a multi-channel 10-bit ADC in a 16-pin SOIC wide-body package operating from a 2.7V to 5.5V supply with an internal oscillator. The part belongs to the lower-power "QY" sub-family of HC08, intended for cost-sensitive embedded applications where analog sensing and small code footprint coexist. A microcontroller (MCU) is a single-chip processor that integrates CPU, program memory, data memory, and peripherals such as timers, communications interfaces, and analog converters into one device. MCUs sit at the bottom of the embedded computing hierarchy - under microprocessors, parallel to DSPs, and above discrete logic. The HC08 family is the 8-bit ancestor of the HCS08 and HCS12 lines, with the "MCL" prefix denoting an extended-voltage (2.7V-5.5V) low-voltage HC08 derivative aimed at battery and 3.3V systems. The 908QY4 sits in the lowest-memory tier of this lineage, optimised for tasks that need only a few KB of firmware. Key features include 13 general-purpose I/O lines, an internal bus clock up to 4MHz (instruction throughput up to 2MHz), an internal oscillator that removes the external crystal requirement, a multi-channel 10-bit successive-approximation ADC, a 16-bit timer with capture/compare/PWM, and a low-power wait/stop mode that draws microamps. The 16-pin SOIC (DWE suffix, 7.5mm body width) is the wide-body variant of the 16-SOIC footprint, providing standard PCB land pattern compatibility with commercial 16-SOIC layouts. The HC08 CPU uses a von-Neumann architecture with shared program/data buses, executing one byte per internal bus cycle and supporting BCD arithmetic plus bit-manipulation instructions. The 4KB Flash is in-application programmable in some variants and provides 100 minimum erase/write cycles, with security-lock protection to block unauthorized memory read-out. Brownout detection and a low-voltage reset hold the part in a safe state when VDD drops below the operating threshold, preventing code corruption on brown-out events. Typical applications include low-cost sensor interface modules (thermostats, smoke detectors, battery chargers), white-goods and appliance controllers (washing machines, microwave ovens, coffee machines), automotive body-electronics sub-modules (AEC-Q100 qualified parts use the S-prefix 'QC' family; the MCL variant is commercial/industrial), and consumer remote controls / IR transceivers. The internal oscillator and small footprint suit small-form-factor designs where PCB area is constrained. When using this device, ensure VDD decoupling with at least 100nF of low-ESR ceramic placed within 5mm of the supply pin and tie unused I/O pins to defined logic levels (do not float). Programming via the background debug mode (BDM) requires the 2-pin BDM interface to be brought out to a header for firmware development; production programming can use in-circuit Flash programming through the same pins. This page consolidates distributor pricing, drop-in compatible HC08 / S08 alternatives, and practical design considerations that go well beyond the manufacturer datasheet summary.

見積もり お問い合わせ
MCR908JK1ECDWE - 8-Bit HC08 MCU 1.5KB Flash | NXP | 20-SOIC
MCR908JK1ECDWE

MCR908JK1ECDWE - 8-Bit HC08 MCU 1.5KB Flash | NXP | 20-SOIC

The NXP Semiconductors MCR908JK1ECDWE is an 8-bit HC08-family microcontroller unit (MCU) with 1.5 KB of on-chip FLASH program memory, 128 bytes of RAM, and an integrated analog-to-digital converter, housed in a 20-pin SOIC wide-body package (7.50 mm width). It is a member of the low-cost, high-performance M68HC08 family and operates from a 3.3 V or 5 V supply with an external oscillator interface and a 14-pin general-purpose I/O set. What is an 8-bit microcontroller? An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (ROM/FLASH), working memory (RAM), and peripheral blocks such as timers, serial interfaces and GPIO into one package. MCUs sit within the broader taxonomy of microcontrollers -> embedded controllers -> microprocessors -> semiconductors. HC08 (High-performance CISC) is NXP/Freescale's 8-bit CISC architecture that succeeds the HC05/HC11 lines, optimized for low-cost, deterministic control of electromechanical and battery-powered products. Key features include an 8 MHz CPU bus, 1.5 KB FLASH, 128 B RAM, 14 GPIO pins, an on-chip ADC, an external oscillator interface, and a wide-body SOIC-20 footprint. The "E" suffix denotes the extended temperature grade, while "EC" indicates the specific FLASH size mask revision; this part is functionally identical in pinout to its 4 KB sibling, the MC908JK3ECDWE. Architecturally, the MCR908JK1ECDWE uses the HC08 CPU core with a unified memory map, BDM (Background Debug Mode) for in-circuit programming, and a simple interrupt controller. Its FLASH-based program memory supports field upgrades, and the wide SOIC-20 footprint simplifies hand-soldering for prototypes and low-volume production. Typical applications include low-cost appliance controllers, white-goods user-interface boards, hobby and educational platforms, simple sensor signal-conditioning front ends, and battery-powered instrument housings. The wide SOIC package makes it suitable for through-hole-style PCB layouts and for designs that must survive hand rework. When designing with this device, confirm that the FLASH size (1.5 KB) and RAM (128 B) meet code-budget requirements before substituting with the 4 KB JK3 variant. Ensure the BDM interface pins are accessible for firmware development and field updates. This page synthesizes NXP product-page data, distributor pricing from DigiKey, Mouser, Octopart, Heisener, and JAK Electronics, drop-in compatible same-package HC908 alternatives, and practical design notes not consolidated on the manufacturer datasheet cover.

見積もり お問い合わせ
MCR908JK3ECDWE - 8-Bit 8MHz 4KB Flash MCU | NXP
MCR908JK3ECDWE

MCR908JK3ECDWE - 8-Bit 8MHz 4KB Flash MCU | NXP

The NXP Semiconductors MCR908JK3ECDWE is an 8-bit HC08 microcontroller with an 8 MHz operating speed, 4 KB of flash program memory, 128 bytes of RAM, and 15 I/O pins in a 20-pin SOIC package. It belongs to the HC08JK family within the M68HC08 family and uses an external oscillator. The device is identified by distributor sources as an HC08 8-bit CISC MCU with 3 V operation and A/D-related peripherals. The M68HC08 family is based on the customer-specified integrated circuit, or CSIC, design strategy and uses the enhanced M68HC08 CPU08 core. HC08 devices combine a compact 8-bit embedded-control architecture with integrated flash memory, RAM, digital I/O, and application-specific peripherals. They are intended for cost-sensitive embedded systems where a deterministic controller, modest program storage, and compact packaging are more important than high computational throughput. Verified distributor information identifies the MCR908JK3ECDWE as a 20-SOIC, 8 MHz, 4 KB flash MCU with 128 x 8 RAM and 15 I/O pins. The Mouser listing also identifies LED, low-voltage detection, power-on reset, PWM, and A/D-related characteristics. The manufacturer product page describes the HC08JK family as part of the M68HC08 family and confirms the CPU08 architecture. These details make the part suitable for compact control, sensing, and signal-generation designs. The 4 KB flash capacity and 128-byte RAM support small embedded-control programs, while the 15 available I/O pins provide connections for sensors, indicators, actuators, and control logic. The 8 MHz CPU08 operating speed is appropriate for basic sequencing, sampling, debouncing, and low-bandwidth control tasks. The exact ADC resolution, supply limits, timing characteristics, oscillator frequency range, and pin-level multiplexing were not supplied in the verified data and must be confirmed in the manufacturer datasheet before design release. Typical applications include small industrial control modules, keypad interfaces, simple sensor nodes, LED status controllers, motor or valve sequencing, and compact consumer products. The 20-pin SOIC package supports conventional through-hole assembly and hand or fixture-based production. Because the listed device is marked end-of-life by NXP, engineers should verify availability, legacy-programming support, and any approved replacement before starting a new design. The primary design consideration is not maximum performance but controlled deployment: validate the exact ADC, oscillator, memory, and electrical limits, confirm software-toolchain support, and plan for end-of-life supply risk. The verified data does not provide a manufacturer PDF URL, detailed pinout, absolute maximum ratings, or verified pricing. Those fields are marked for data acquisition rather than inferred from generic HC08 family assumptions. This page combines verified distributor and manufacturer information with an explicit uncertainty record, helping engineers distinguish confirmed MCR908JK3ECDWE specifications from parameters that still require datasheet confirmation. It also records why drop-in alternatives were not listed: the supplied cross-reference results did not establish a qualified, pin-compatible replacement.

見積もり お問い合わせ
MCR908JL3ECDWE - HC08 8-Bit 8MHz 4KB Flash MCU | NXP SOIC-28
MCR908JL3ECDWE

MCR908JL3ECDWE - HC08 8-Bit 8MHz 4KB Flash MCU | NXP SOIC-28

The NXP (formerly Freescale) MCR908JL3ECDWE is an 8-bit HC08-family CISC microcontroller unit (MCU) integrating 4KB of on-chip Flash memory, operating at a CPU clock speed of 8 MHz, and housed in a 28-pin SOIC W (wide-body) surface-mount package. The 'MCR' prefix indicates a factory-programmed ROM device variant of the MC908JL3, supplied in tape-and-reel packaging for high-volume assembly. According to the NXP product page, this part has reached End of Life and is being discontinued, with Rochester Electronics and other specialist distributors continuing to support inventory for legacy designs. The device operates from a 3.3V or 5V supply and is targeted at cost-sensitive embedded control applications. An 8-bit microcontroller (MCU) is a single-chip computer containing a processor core, non-volatile program memory (Flash or ROM), volatile working memory (RAM), and a set of peripheral interfaces such as timers, serial ports, and analog-to-digital converters. The HC08 architecture is a CISC (Complex Instruction Set Computer) variant of the Motorola/Freescale M68HC08 family, which succeeded the older HC05 and HC11 families and added Background Debug Mode (BDM), a configurable system clock, and improved low-power modes. MCUs of this generation sit one tier below 32-bit ARM Cortex-M parts in computational capability, but excel in deterministic interrupt response, ultra-low unit cost, and a small code footprint in C or assembly. Key features of the MCR908JL3ECDWE include 4KB of embedded Flash for application and bootloader storage, an internal 8 MHz oscillator, 128 bytes of RAM (per the JL3 family datasheet), an internal timer with multiple channels, and a serial communications interface. The 28-pin SOIC wide-body package exposes all digital I/O, supply, ground, reset, IRQ, and oscillator pins along the two long sides of the IC. The HC08JL3 is the lowest-memory member of the JL family, intended for applications where a small, well-defined program can replace discrete logic or analog control. Typical applications include low-cost appliance controls, simple sensor signal conditioning, fan and pump controllers, remote-control transmitters, battery chargers, and small user-interface boards with LED or seven-segment displays. The wide 3.3V/5V supply tolerance allows direct connection to either common logic-rail systems in legacy industrial designs. The 8 MHz CPU clock provides enough processing headroom for sensor reading, basic state-machine control, and serial protocol handling (SCI/SPI) without external clocking. When designing with the MCR908JL3ECDWE in a new system, note that the ROM/prefix-coded variant cannot be reprogrammed by the user. For prototyping or low-volume production, the Flash-based MC908JL3ECDWE sibling is preferred because it supports in-circuit reprogramming via the BDM interface. Engineer also notes that this part has reached End of Life - long-term designs should evaluate the KEAZ, S08, or S12K successors from NXP, although they require different packages and toolchains. This page synthesizes distributor pricing, drop-in same-family alternatives, comparison data with siblings MC908JL3ECDWE and MC908JK3ECDWE, and practical design guidance not aggregated on the manufacturer product page, helping engineers verify replacement options for an EOL part.

見積もり お問い合わせ
MCR908JLEMPE - 8-Bit FLASH Microcontroller | NXP
MCR908JLEMPE

MCR908JLEMPE - 8-Bit FLASH Microcontroller | NXP

NXP Semiconductors MCR908JLEMPE is an 8-bit FLASH microcontroller with an HC08/S08 CPU and CMOS construction. The verified distributor records classify it as a microcontroller IC, but they do not provide the exact flash capacity, clock frequency, package pinout, operating voltage, or peripheral configuration. Its legacy Freescale Semiconductor origin places it in the HC08/S08 microcontroller family. The available LCSC listing reports a price of $10.6563, while distributor records identify Rochester Electronics and LCSC as supply sources. Because the detailed electrical and mechanical data were not included in the retrieved records, this page distinguishes verified facts from parameters that still require confirmation in the manufacturer documentation. A microcontroller is a programmable semiconductor that integrates a CPU, memory, digital I/O, and peripherals on one device. An 8-bit FLASH microcontroller uses an 8-bit data path and stores program data in rewritable FLASH rather than mask-programmed ROM. HC08/S08 devices belong to a broad embedded-control family used for industrial control, consumer products, appliances, and small automation systems. The MCR908JLEMPE should therefore be treated as a legacy embedded controller rather than as a modern high-performance application processor. The verified MCR908JLEMPE records specifically identify FLASH memory, an HC08/S08 CPU, CMOS construction, and the MPN itself. Rochester Electronics is shown as the DigiKey supplier, and LCSC classifies the device under Microcontrollers, MCUs, MPUs and SoCs. These identifiers establish the component category and core architecture, but they are insufficient to confirm memory density, I/O count, timer resources, communication peripherals, electrical limits, or software compatibility. Engineers must verify those values before designing a new PCB or approving a drop-in replacement. A typical HC08/S08 implementation would place the MCU beside its regulated supply, clock circuitry, reset network, and application peripherals. The CPU executes firmware that samples inputs and controls outputs. Because the provided data does not include a verified package designation, PCB footprint, pin names, or exposed-pad information, this page does not publish a pinout or package drawing. A board revision must be checked against the original HC08/S08 documentation before placement. Possible legacy uses include appliance controllers, small motor-control boards, keypads, sensor interfaces, and industrial automation modules. These are application categories derived from the MCU position in the HC08/S08 embedded-control family, not verified reference designs for the exact MPN. Before using MCR908JLEMPE in one of these systems, confirm supply voltage, flash size, I/O voltage, peripheral compatibility, clock requirements, package dimensions, and firmware behavior from the official documentation. The key procurement consideration is lifecycle and documentation risk. The MCR908JLEMPE is presented in the verified results through established distributors, but the supplied records do not explicitly state active, NRND, or obsolete status. For long-term production, confirm current NXP or authorized-distributor status and obtain the applicable datasheet, reference manual, errata, and programming tools before committing a design. This page synthesizes the supplied distributor records and cross-reference results while clearly marking unavailable technical data rather than inventing specifications.

見積もり お問い合わせ
MCS12GC64CFUE - 16-Bit 25MHz 64KB Flash MCU | NXP
MCS12GC64CFUE

MCS12GC64CFUE - 16-Bit 25MHz 64KB Flash MCU | NXP

The NXP Semiconductors MCS12GC64CFUE is a 16-bit HCS12 microcontroller operating at 25 MHz, with 64 KB of flash program memory and 60 general-purpose I/O pins in an 80-QFP package measuring 14 x 14 mm. It is identified as a 64K x 8 flash MCU and is positioned for embedded control applications requiring a combination of microcontroller processing, serial connectivity, timing, and control peripherals. A microcontroller is a programmable semiconductor device that integrates a processor core, memory, and peripheral interfaces onto one package. The HCS12 architecture belongs to the embedded-microcontroller hierarchy and is commonly used for industrial controllers, automotive subsystems, communication equipment, and compact control systems. The MCS12GC64CFUE specifically provides a 16-bit core, 25 MHz operation, 64 KB flash memory, and 60 I/O pins according to the verified distributor and datasheet search results. The key device characteristics visible in the verified data are the 16-bit processor architecture, 25 MHz maximum stated speed, 64 KB flash program memory organized as 64K x 8, 80-QFP packaging, and 60 I/O pins. The package is listed as 14 x 14 mm. The verified technical listing also identifies EBI/EMI, SCI, and SPI connectivity, along with power-on reset, PWM, and watchdog-timer peripherals. These features make the device suitable for designs that need multiple external interfaces and embedded control logic. The device belongs to the HCS12 family and is described in distributor listings as an HCS12 microcontroller. Its 64 KB flash capacity provides a defined firmware-storage target for embedded control code, while the 60 I/O pins provide interface capacity for sensors, actuators, logic signals, and communication peripherals. The 25 MHz operating speed supports time-sensitive control tasks, although final firmware performance depends on the application, memory configuration, and external circuitry. Typical applications include industrial automation equipment, automotive electronic control units, embedded communication modules, motor and actuator controllers, and compact embedded systems. The EBI/EMI interface can support external bus-oriented designs, SCI is suited to serial communications, and SPI can connect to sensors, displays, memory, and other digital peripherals. These functions should be validated against the complete manufacturer datasheet before schematic or firmware release. Designers should pay particular attention to the 80-QFP footprint, pin multiplexing, supply requirements, clock configuration, memory programming, and peripheral pin assignments. Because the component is listed as obsolete in the verified search result, production sourcing should include lifecycle confirmation, authorized-channel stock checks, and a controlled last-time-buy or redesign plan. The page provides verified data, practical application context, and sourcing guidance; unavailable parameters remain explicitly marked rather than estimated. This page combines distributor specifications, lifecycle information, package details, and application-oriented engineering guidance for engineers evaluating MCS12GC64CFUE. It emphasizes what the verified data establishes, identifies the obsolete status shown in the search result, and separates confirmed specifications from parameters that require the manufacturer datasheet.

見積もり お問い合わせ
MCXA345VLH - 180MHz Cortex-M33 MCU, 512KB Flash | NXP
MCXA345VLH

MCXA345VLH - 180MHz Cortex-M33 MCU, 512KB Flash | NXP

The NXP MCXA345VLH is a mixed-signal Arm Cortex-M33 microcontroller IC running at 180 MHz with 512 KB of on-chip Flash, intended for advanced motor control and real-time embedded applications. It integrates a single-precision FPU, a mathematical acceleration unit (MAU) for motor-control DSP, SmartDMA, dual FlexPWM modules with submodule flexibility, up to four embedded op-amps and up to four 16-bit ADCs, and is housed in a 64-pin LQFP (10x10 mm) package. A microcontroller (MCU) is a compact, self-contained computing device that integrates a CPU core, program and data memory, peripherals, and I/O on a single silicon die. The Cortex-M33 class adds Arm TrustZone-M security, a single-precision FPU, DSP extensions and deterministic interrupt handling for industrial-grade mixed-signal control. Within NXP's portfolio taxonomy, the MCX A34 family sits below the higher-end MCX N and i.MX RT crossover lines and above the mainstream Kinetis KE/KM series - bridging real-time motor control, power conversion and analog-front-end integration into a single MCU. Key differentiating features include: 180 MHz Cortex-M33 core with MPU and TrustZone-M, 512 KB Flash and up to 96 KB SRAM, dual FlexPWM with 8 PWM outputs suited to 3-phase inverter topologies, up to four 16-bit ADCs at 2 MSPS for current/voltage feedback, four on-chip op-amps that eliminate external signal conditioning, and a low-power run/standby architecture with multiple wake-up sources. The MAU accelerates trigonometric and Clarke/Park transforms for field-oriented motor control. Typical applications include BLDC/PMSM motor drives for appliances, HVAC fans and pumps, industrial servo and robotics, digital power conversion (PFC, buck/boost), e-bike and light electric-vehicle controllers, and solar micro-inverter gate-driver boards. The 64-pin LQFP footprint is industrial-friendly, supports hand-solderable prototypes and matches the package placement used by the wider MCX A34 family. When designing with the MCXA345VLH, allocate adequate decoupling (100 nF + 1 uF per VDD pin pair) and route analog/digital grounds as a star tied under the exposed pad. The internal op-amps save PCB area but need output current considered when driving ADC inputs with long tracks. For firmware development, use the NXP MCX A345 device family pack (DFP) in MCUXpresso IDE or Keil MDK.

見積もり お問い合わせ
MCXN556TCDFT - MCX N556 MCU 184MHz 250KB VFBGA-184 | NXP
MCXN556TCDFT

MCXN556TCDFT - MCX N556 MCU 184MHz 250KB VFBGA-184 | NXP

The NXP Semiconductors MCXN556TCDFT is a dual-core Arm Cortex-M33 microcontroller from the MCX N series, integrating 250 KB SRAM in a 184-ball VFBGA (very thin fine-pitch BGA) package measuring 9 mm x 9 mm x 0.86 mm with a 0.5 mm ball pitch. Key features include an Arm Cortex-M33 core (with optional Cortex-M0+ companion core) operating up to 150 MHz, a high-speed Cortex-M33 core up to 250 MHz, 250 KB on-chip SRAM, a low-power voltage regulator, and an integrated 12-bit ADC, programmable peripherals, and a comprehensive set of connectivity options including USB, CAN-FD, I3C, and FlexIO. The MCX N series is a scalable, low-power microcontroller family designed for secure, edge-connected IoT and industrial applications. It belongs to the broader MCU taxonomy as a Cortex-M33 based device -> ARM Cortex-M microcontroller -> general-purpose MCU -> microcontroller IC -> embedded system component. The high-performance main core runs at up to 250 MHz, while the Cortex-M0+ low-power core operates up to 150 MHz, providing heterogeneous compute for both performance-critical and energy-efficient tasks. The device integrates multiple low-power modes, on-chip SRAM, security features such as secure boot and cryptographic accelerators, a fast ADC, and a rich set of timers and communication peripherals. The combination of performance, integration, and low power consumption makes the MCXN556TCDFT well-suited for industrial IoT endpoints, secure connected sensors, and battery-powered edge devices. Typical applications include industrial IoT sensor nodes, secure connected home and building automation, battery-powered wearables, motor control and field-oriented control, secure payment terminals, and predictive maintenance sensor hubs. When designing with this device, ensure PCB layout accommodates the 0.5 mm pitch VFBGA ball array and provides adequate thermal vias beneath the central thermal balls; careful signal-integrity routing is required for the high-speed ADC and USB interfaces.

見積もり お問い合わせ
MEC1428-TF-C1 - 192KB MCU with SAF | Microchip Technology
MEC1428-TF-C1

MEC1428-TF-C1 - 192KB MCU with SAF | Microchip Technology

The Microchip Technology MEC1428-TF-C1 is a keyboard and embedded controller microcontroller with a MIPS32 M14K processor, 192KB SRAM, external program memory, and Slave Attached Flash support, packaged in a 128-WFBGA. It operates from 1.71V to 3.465V and provides 108 I/O in a commercial 0°C to 70°C temperature grade. A microcontroller integrates a processor core, memory, programmable I/O, and communication peripherals into one device. The MEC1428 belongs to the MEC14XX family and targets embedded control, keyboard, and USB Type-C power-delivery designs. Its Slave Attached Flash interface provides a dedicated path for external flash integration, while the integrated I2C, LPC, SMBus, SPI, and UART interfaces support system-management and peripheral connectivity. Key features include the MIPS32 M14K core, 192KB of SRAM, external program-memory architecture, 108 I/O, and the 128-WFBGA package. The broad peripheral mix allows keyboard controllers, embedded controllers, storage devices, and platform-management components to share one controller platform. The listed 1.71V to 3.465V operating range supports embedded systems that require low-voltage digital rails. The MEC1428 is designed for applications where external flash is required and where a compact controller needs multiple low-speed and high-speed serial interfaces. Its eSPI and LPC connectivity are particularly useful in embedded platform designs, while SPI, I2C, SMBus, and UART provide flexible peripheral expansion. The 128-WFBGA package offers dense integration but requires careful PCB layout and thermal verification. Typical uses include USB Type-C power-delivery controllers, keyboard and embedded control systems, storage-management controllers, and platform support logic. The external-program-memory architecture should be matched with the intended flash device, interface timing, and firmware boot strategy. Designers should review the complete Microchip datasheet and reference design before layout. Pay particular attention to ball assignments, power rails, decoupling, external-flash routing, and signal integrity because the BGA package leaves little tolerance for layout errors. This page consolidates verified distributor information, manufacturer-device positioning, interface details, and practical selection guidance to support fast sourcing and engineering review.

見積もり お問い合わせ