マイクロコントローラ

製品 (20,000+)

MK22FN512VMP12 - 120MHz Cortex-M4F 512KB MCU | NXP
MK22FN512VMP12

MK22FN512VMP12 - 120MHz Cortex-M4F 512KB MCU | NXP

The NXP MK22FN512VMP12 is a 32-bit ARM Cortex-M4F microcontroller operating at up to 120 MHz, with 512 KB of flash memory, 128 KB of SRAM, and a 64-MAPBGA package measuring 5 mm by 5 mm. It combines an integrated floating-point unit with USB connectivity and analog peripherals for cost-sensitive industrial, medical, and embedded applications. A microcontroller is a compact computer system integrated onto one semiconductor die. It includes a processor core, nonvolatile program memory, volatile data memory, peripherals, and communication interfaces. The MK22FN512VMP12 belongs to the NXP Kinetis K22F family and is designed for applications requiring efficient processing, flexible low-power operation, and extensive peripheral integration without a separate floating-point processor. Key features include an ARM Cortex-M4F processor core, 120 MHz maximum operating frequency, 512 KB flash, 128 KB SRAM, full-speed USB connectivity, and integrated analog resources. The floating-point unit supports efficient single-precision arithmetic, while the 512 KB flash capacity accommodates larger embedded applications, USB firmware, and protocol stacks. The 64-MAPBGA package also supports compact, high-density PCB layouts. The device combines a high-performance Cortex-M4F core with low-power design flexibility and a broad peripheral set. Its architecture supports both performance-oriented control and low-power embedded operation, making it suitable for connected equipment that must balance processing throughput, USB functionality, analog measurement, and board-space constraints. The 5 mm by 5 mm package requires careful PCB layout and thermal verification during manufacturing. Typical applications include industrial control systems, medical equipment, USB-connected data acquisition, communications equipment, motor-control systems, and low-power embedded products. NXP describes the family as optimized for cost-sensitive applications requiring USB connectivity, processing efficiency, and high peripheral integration with a floating-point unit. Designers should verify the exact pin multiplexing, package ball assignments, power requirements, clock configuration, and USB routing against the manufacturer datasheet before layout. The 64-MAPBGA package is not a land-grid array with exposed pads in the usual sense; its ball assignments must be checked carefully. For firmware migration, memory-map differences, peripheral availability, and clock-tree behavior should be reviewed instead of assuming that any similar Kinetis part is a drop-in replacement. This page consolidates the verified manufacturer and distributor information, package details, technical positioning, selection guidance, and engineering considerations for engineers evaluating the MK22FN512VMP12.

見積もり お問い合わせ
MK22FX512AVLK12 - Kinetis K22 120MHz Cortex-M4F MCU | NXP
MK22FX512AVLK12

MK22FX512AVLK12 - Kinetis K22 120MHz Cortex-M4F MCU | NXP

The NXP Semiconductors MK22FX512AVLK12 is a 32-bit ARM Cortex-M4F microcontroller from the Kinetis K22 sub-family, delivering 120 MHz CPU performance with single-precision floating-point and DSP instructions, housed in an 80-pin LQFP package (12x12 mm). The device integrates 512 KB of program flash and 128 KB of FlexMemory (FlexNVM plus FlexRAM configurable as additional flash or EEPROM), supplemented by 128 KB of on-chip SRAM for data and stack, and a full-speed USB 2.0 OTG controller with on-chip transceiver. A microcontroller (MCU) is a System-on-Chip that combines a processor core, program and data memory, a rich set of peripherals, and I/O interfaces into a single device. Kinetis K22F sub-family MCUs specifically target cost-sensitive applications that require a balance of low power, peripheral flexibility, and processing efficiency, sitting within the broader Kinetis family hierarchy (Kinetis -> ARM Cortex-M -> 32-bit MCU -> microcontroller -> semiconductor). The MK22FX512AVLK12 is the industry workhorse variant of this family, widely used in industrial control, USB peripherals, and human-machine interface subsystems. Key features include an integrated 16-bit ADC with multiple conversion modes, high-speed comparators, FlexTimers with PWM, low-power UART and I2C peripherals, a real-time clock, and a comprehensive clocking scheme. The Cortex-M4F core delivers 1.25 Dhrystone MIPS per MHz with hardware single-precision floating-point acceleration, deterministic interrupt response, and optional DSP extensions. The MCU supports a wide operating voltage range from 1.71 V to 3.6 V and offers multiple low-power modes down to deep-sleep for battery-powered products. Typical applications include industrial control and human-machine interface (HMI) panels, USB HID peripherals such as keyboards and scanners, smart energy metering, point-of-sale terminals, and medical instrumentation. The combination of USB 2.0 full-speed, ample SRAM, and an ADC-rich analog mix-in allows the device to bridge wired connectivity and analog signal acquisition in a single chip. When designing with the MK22FX512AVLK12, ensure all VDD/VSS pin pairs are decoupled with a 100 nF X7R ceramic capacitor placed within 5 mm of each pair, and reserve an additional 4.7 uF bulk capacitor near the MCU to handle USB inrush events. Route the 16-bit data bus with impedance-controlled traces if DDR-like external memory is added, although on-chip memory is usually sufficient. This page synthesizes distributor pricing, drop-in pin-compatible alternatives (same 80-LQFP footprint), and practical layout/design notes that streamline BOM management and selection decisions beyond the manufacturer datasheet.

見積もり お問い合わせ
MK22FX512AVMC12 - 120MHz Cortex-M4F MCU, 512KB Flash | NXP
MK22FX512AVMC12

MK22FX512AVMC12 - 120MHz Cortex-M4F MCU, 512KB Flash | NXP

The NXP MK22FX512AVMC12 is a Kinetis K22F sub-family 32-bit ARM Cortex-M4F microcontroller running at up to 120 MHz with an integrated single-precision floating-point unit, 512 KB of program flash, 128 KB of FlexMemory, and 128 KB of SRAM, housed in a 121-pin MAPBGA (8 mm × 8 mm) package. It combines high-performance DSP-class signal processing with a rich set of analog peripherals, including two 16-bit ADCs, two 12-bit DACs, programmable gain amplifiers, and a 12-bit analog comparator, plus a full-speed USB 2.0 On-The-Go controller with integrated PHY. The wide operating voltage range of 1.71 V to 3.6 V and the -40 °C to +105 °C industrial temperature range suit battery-powered and industrial products alike. A microcontroller (MCU) is a single-chip processor that integrates a CPU core, program and data memory, and a configurable set of analog and digital peripherals, intended for embedded control tasks. MCUs sit within the broader semiconductor hierarchy as follows: microcontroller -> embedded processor -> integrated circuit -> semiconductor. The K22F family in particular targets cost-sensitive applications that require Cortex-M4 DSP performance plus analog and USB integration in a small BGA footprint. Key features include 512 KB of flash with flash swap capability, 128 KB of FlexMemory that can be allocated between EEPROM emulation and additional program flash, four 32-bit timers, two 16-bit low-power timers, a 12-channel DMA controller, multiple serial interfaces (UART, SPI, I2C), an SDHC card interface, and an integrated FlexIO peripheral. Hardware cryptographic acceleration (AES, DES, and a true random number generator) is also present in this sub-family variant. The 121-MAPBGA package offers a small 8 × 8 mm body while exposing 70+ GPIO and the full set of analog and digital peripherals. The K22F architecture uses a Cortex-M4F core with single-cycle MAC, single-precision FPU, and a tightly-coupled memory interface that gives deterministic interrupt response. The 120 MHz clock, 1.25 DMIPS/MHz core, and DSP extensions make the device suitable for real-time control loops, audio processing, and small protocol stacks simultaneously. The on-chip voltage regulator with multiple low-power modes (Run, Wait, Stop, VLPR, VLPS, LLS, VLLSx) enables deep-sleep currents below a few microamperes when peripherals are gated off. Typical applications include industrial control and HMI, USB peripherals, low-power instrumentation, motor control reference designs, building automation, sensor hubs, and consumer audio docks. The combination of USB 2.0 OTG with 16-bit ADC and DSP-class core is a strong fit for any USB-connected data acquisition product. Designers should pay attention to MAPBGA PCB layout: use microvia or via-in-pad technology if possible, follow NXP's BGA escape routing recommendations, and provide a continuous ground plane underneath the device for both thermal dissipation and signal integrity. Decouple VDD with 100 nF + 4.7 µF per supply pin per the manufacturer reference design. This page synthesizes distributor pricing, drop-in same-brand Kinetis alternatives, and practical BGA layout guidance not found in the manufacturer datasheet alone.

見積もり お問い合わせ
MK22FX512VLH12 - 120MHz Cortex-M4F MCU, 512KB Flash, USB | NXP
MK22FX512VLH12

MK22FX512VLH12 - 120MHz Cortex-M4F MCU, 512KB Flash, USB | NXP

The NXP MK22FX512VLH12 is a 32-bit ARM Cortex-M4F microcontroller from the Kinetis K22F sub-family, delivering up to 120 MHz core performance with 512 KB of embedded flash plus 128 KB of FlexMem (configurable as additional flash, EEPROM, or cache), 128 KB of system SRAM, and an integrated Full-Speed USB 2.0 controller with on-chip transceiver, all in a 64-pin LQFP (10 mm x 10 mm) package. It integrates DSP instructions and a single-precision floating-point unit (FPU), making it suitable for signal-processing workloads without software-emulated math. An ARM Cortex-M4 microcontroller is a 32-bit processor core designed by ARM Holdings that combines microcontroller-level interrupt determinism with DSP extensions and (optionally) a single-precision floating-point unit. Cortex-M4 sits within the Cortex-M family (Cortex-M0 -> M0+ -> M3 -> M4 -> M7 -> M33/M85), which itself is a subset of the ARM architecture used in microcontrollers, controllers, and edge processors. The K22F belongs to NXP's Kinetis family of Cortex-M microcontrollers and the broader power-management-IC ecosystem of mixed-signal embedded processors. Key features of the MK22FX512VLH12 include hardware AES cryptography, a 16-bit SAR ADC with up to 24 channels, high-speed comparators, FlexTimers for motor-control PWM, a low-power real-time clock (RTC), low-leakage wakeup unit, and multiple serial peripherals (UART, SPI, I2C, I2S). The integrated USB Full-Speed controller with on-chip PHY supports crystal-less USB operation in compatible board designs, reducing BOM cost and board area. The wide operating voltage range (typically 1.71 V to 3.6 V) and multiple low-power modes support battery-powered applications. Typical applications for the MK22FX512VLH12 include industrial control, IoT edge nodes, embedded automation, motor control (BLDC/PMSM FOC), metering and energy measurement, low-power board designs, USB peripherals, and human-machine interface (HMI) systems. Kinetis K22 devices are AEC-Q100 qualified for certain variants and offer scalability across the Kinetis portfolio. When designing with the MK22FX512VLH12, ensure the USB DP/DM trace impedance meets 90 ohms differential and that decoupling capacitors are within 5 mm of each supply pin. Use the FlexMem region for EEPROM emulation or bootloader partitioning, and consult the Kinetis SDK (KSDK) for driver support. This page synthesizes verified distributor pricing, drop-in and pin-compatible alternatives, datasheet citations, and practical design notes - information not aggregated in any single source, including the manufacturer datasheet.

見積もり お問い合わせ
MK22FX512VLL12 - 120MHz Cortex-M4F MCU, 512KB Flash | NXP
MK22FX512VLL12

MK22FX512VLL12 - 120MHz Cortex-M4F MCU, 512KB Flash | NXP

The NXP MK22FX512VLL12 is a 32-bit ARM Cortex-M4F microcontroller from the Kinetis K22 sub-family, integrating 512KB of flash, 128KB of RAM, and 128KB of FlexMemory on a 120MHz core, housed in a 100-pin LQFP (14x14 mm) package. It provides up to 512KB program flash plus FlexMemory (FlexNVM + FlexRAM) for EEPROM emulation, USB 2.0 full-speed with on-chip transceiver, and a rich analog/peripheral set including multiple FTM timers, ADC, DAC, comparators, and communication peripherals. The device operates from 1.71V to 3.6V and is rated for -40C to +105C. A Kinetis K22 microcontroller (MCU) belongs to the ARM Cortex-M4F class of mixed-signal microcontrollers, sitting in NXP's Kinetis portfolio that bridges low-power K0 and high-performance K6x. The K22 sub-family is positioned for cost-sensitive applications that still need DSP instructions, a single-precision FPU, and USB connectivity; in the taxonomy it is a Cortex-M4F -> ARM Cortex-M -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor device. The FX sub-class emphasizes large flash and full peripheral count. Key features of the MK22FX512VLL12 include 120MHz Cortex-M4F core with DSP and FPU, 512KB flash, 128KB SRAM, 128KB FlexMemory, USB 2.0 full-speed OTG with on-chip transceiver, up to 16-bit ADC, 12-bit DAC, low-power run/wait/stop modes with RTC wake-up, and an extensive timer/PWM set. NXP's Kinetis K22 documentation states these peripherals enable a single-chip solution for industrial control, USB peripherals, and point-of-sale terminals. The architecture combines an ARM Cortex-M4F core with NXP's peripheral bus matrix, low-leakage wake-up unit, and a multi-power-rail design for low-power operation. FlexMemory allows the user to allocate a portion of flash for EEPROM emulation, simplifying data-logging firmware without external EEPROM. Memory-mapped peripheral registers and the standard ARM NVIC provide deterministic interrupt response for real-time control. Typical applications include USB HID/mass-storage devices, industrial sensor nodes with USB diagnostics, point-of-sale terminals, home/building automation controllers, motor control, and portable medical devices. The 100-pin LQFP exposes the broadest peripheral set of the K22 family and supports easy hand-soldering and rework, which suits low-volume and prototype runs. The combination of USB, large flash, and Cortex-M4F DSP makes the MK22FX512VLL12 a strong fit when firmware needs signal-processing or USB-class firmware stacks. When designing with the MK22FX512VLL12, ensure the USB DPULL/DMDL lines are routed as a 90-ohm differential pair and that the VBAT/VLL pins are properly decoupled. Verify your firmware against NXP's K22F reference manual for clock-tree configuration and 1.71V minimum VDD during flash programming; lower VDD will abort flash writes silently. This page synthesizes distributor pricing, drop-in same-package alternatives, and design considerations not aggregated on the NXP product page alone, providing an AEO/AEO-friendly reference for engineers evaluating the MK22FX512VLL12.

見積もり お問い合わせ
MK22FX512VMC12 - 120MHz Cortex-M4F MCU, 512KB Flash | NXP
MK22FX512VMC12

MK22FX512VMC12 - 120MHz Cortex-M4F MCU, 512KB Flash | NXP

The NXP MK22FX512VMC12 is a 32-bit ARM Cortex-M4F microcontroller from the Kinetis K22F sub-family, delivering 120 MHz CPU performance with 512 KB of embedded flash memory and 128 KB of SRAM, housed in a 121-pin MAPBGA (8x8 mm) package. Operating from 1.71 V to 3.6 V, the device supports multiple voltage domains (1.8 V, 2.5 V, and 3.3 V) for mixed-signal I/O flexibility and is targeted at cost-sensitive applications requiring low-power flexibility and processing efficiency. What is a Kinetis K22F microcontroller? The K22F sub-family sits within NXP's Kinetis portfolio of ARM Cortex-M4 microcontrollers, optimized for applications that balance low-power operation, USB connectivity, and DSP-class signal processing. K22F devices integrate an FPU, a flexible low-power ARM Cortex-M4 core, and a peripheral set including USB 2.0 full-speed on-the-go, multiple serial interfaces, and a 16-bit SAR ADC. The K22 family is positioned as the bridge between the K10 entry-level family and the K60/K70 high-performance families, offering USB plus floating-point math at moderate price points. Key features of the MK22FX512VMC12 include a Cortex-M4F core with single-precision FPU, 512 KB flash with 128 KB FlexMemory, 128 KB SRAM, full-speed USB 2.0 OTG with on-chip transceiver and internal pull-up/pull-down resistors, a 16-bit SAR ADC with up to 24 channels, DMA controllers, and a wide operating voltage range from 1.71 V to 3.6 V. The device also integrates a low-power real-time clock, multiple low-power modes (Run, Wait, Stop, VLPR, VLPS, LLS, VLLSx), and a programmable interrupt controller. The 121-MAPBGA package supports compact PCB layouts while providing ample I/O for mixed-signal designs. Architecturally, the K22F MCU employs a Harvard bus structure with separate code and system buses, single-cycle flash access, and a tightly coupled peripheral bridge for deterministic I/O. The FlexMemory block supports configurable EEPROM emulation, allowing portions of the flash array to be split between program code and data EEPROM without external storage. Typical applications include industrial control nodes, USB HID peripherals, low-power sensor hubs, handheld data loggers, building automation, and consumer devices needing USB device or host connectivity. The wide voltage range and low-power modes make it suitable for battery-powered instruments. Designers should pay particular attention to the PCB layout for the MAPBGA land pattern, the USB DP/DN trace impedance (90 ohm differential), and the decoupling network (typically a 0.1 uF capacitor per VDD pin plus a bulk capacitor) to maintain signal integrity. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
MK22FX512VMD12 - 120MHz Cortex-M4F MCU, 512KB Flash, USB, 144-MAPBGA | NXP
MK22FX512VMD12

MK22FX512VMD12 - 120MHz Cortex-M4F MCU, 512KB Flash, USB, 144-MAPBGA | NXP

The NXP MK22FX512VMD12 is a Kinetis K22 microcontroller built around an ARM Cortex-M4F core with single-precision FPU, running up to 120 MHz, integrating 512 KB of program flash plus 128 KB of FlexMemory and 128 KB of SRAM, and housed in a 144-pin MAPBGA package (13 x 13 mm). The K22 sub-family adds a full-speed USB OTG transceiver with crystal-less operation, a 16-bit SAR ADC, multiple timers, and the low-power Kinetis peripheral set, making it a strong fit for cost-sensitive embedded nodes that need USB connectivity without a separate PHY. What is a Kinetis K microcontroller? The Kinetis K series is NXP's Cortex-M4 based MCU portfolio organized into sub-families (K10/K20/K22/K60/K70) that share peripheral IP but scale flash, RAM, and package. The K22 sits in the mid-range with 512 KB flash, 128 KB RAM, and integrated USB OTG. In the broader taxonomy, this part is a 32-bit microcontroller -> ARM Cortex-M MCU -> Kinetis K-series -> K22 sub-family -> general-purpose embedded controller. USB OTG, FPU, and FlexMemory are its three defining technology differentiators versus older K10/K20 parts. Key features include 120 MHz CPU with FPU, 512 KB flash, 128 KB FlexMemory (EEPROM emulation), 128 KB SRAM, full-speed USB OTG with on-chip transceiver, 16-bit SAR ADC, 12-bit DAC, multiple DMA channels, and low-power Run / VLPR / VLPS / LLS / VLLS modes. The part supports -40 C to +105 C industrial temperatures and is suitable for IEC 60730 class B safety applications. Hardware cryptography and tamper detection are not included, so secure boot must be implemented in firmware. Technical depth: The K22 uses a Cortex-M4F core with DSP instructions and single-precision FPU, an 8-channel DMA, a multi-purpose FlexBus external bus controller, and a programmable gain amplifier. The MAPBGA 144-pin package exposes rich I/O including up to 4 UART, 3 SPI, 2 I2C, 2 CAN, USB OTG, and an SDHC interface. The MAPBGA 144 has a typical thermal resistance theta_JA of approximately 30-35 C/W on a 4-layer JEDEC test board. Typical applications include industrial control, USB human-interface devices, point-of-sale terminals, low-power sensor hubs, motor control with FOC, building automation, and portable medical accessories. The combination of FPU, USB, and 128 KB RAM supports real-time control loops and USB stacks on a single die. Design consideration: Route the MAPBGA fan-out on a 4-layer PCB minimum with micro-vias; supply the VBAT pin from a backup battery if RTC retention is needed across power cycles; configure the MCG mode (FEI/FEE/PBE/PEE) before enabling the on-chip USB transceiver to ensure 48 MHz USB clock accuracy. This page synthesizes distributor pricing, same-package K-series alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
MK24FN1M0VDC12 - 120MHz Cortex-M4 K24 MCU, 1MB Flash | NXP
MK24FN1M0VDC12

MK24FN1M0VDC12 - 120MHz Cortex-M4 K24 MCU, 1MB Flash | NXP

The NXP Semiconductors MK24FN1M0VDC12 is a Kinetis K24 32-bit ARM Cortex-M4 microcontroller running at up to 120 MHz, integrating 1 MB of flash and 256 KB of SRAM in a 121-ball XFBGA (8 mm x 8 mm) package. It targets low-power, cost-sensitive embedded designs that demand high-performance processing and large on-chip memory densities, with Full-Speed USB and a rich mix of analog and communication interfaces for industrial, medical, and consumer applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (flash), working memory (SRAM), and peripheral interfaces (UART, SPI, I2C, ADC, timers, GPIO). The K24 belongs to the Kinetis K-series Cortex-M4F microcontrollers -> ARM Cortex-M family -> 32-bit MCU -> embedded processor -> semiconductor device hierarchy. The Cortex-M4F core adds a single-precision IEEE-754 floating-point unit, a Memory Protection Unit, and DSP extensions, enabling efficient fixed-point and floating-point signal processing for sensor fusion and motor control. The XFBGA-121 package with 8 mm x 8 mm body and 0.5 mm pitch supports compact board layouts typical of wearables, IoT gateways, and space-constrained industrial controllers. Key features include 1 MB flash with 256 KB SRAM, a 16-bit ADC with selectable single-ended or differential inputs, 12-bit DAC, FlexTimer/PWM modules, low-power run/wait/stop operating modes, full-speed USB 2.0 on-chip transceiver, multiple serial communication blocks (UART, SPI, I2C), and an operating temperature range suitable for industrial environments. The integrated low-power segment LCD driver is a differentiator versus general-purpose Cortex-M4 MCUs that lack display support. The architecture pairs a Cortex-M4F core with NXP's low-leakage wake-up unit and a multi-power-rail design. It supports up to 120 MHz core clock with a flexible clock tree: fast internal reference, slow internal reference, RTC oscillator, and system PLL. The rich peripheral set enables direct connection to mixed-signal sensors, motor-driver stages, and USB hosts or devices. Typical applications include industrial sensor hubs, USB-based data loggers, building automation controllers, low-power medical monitoring devices, and human-machine interface (HMI) terminals with segment-LCD displays. The combination of large flash and on-chip USB is particularly valuable for firmware-over-USB product-update workflows and for compact point-of-care instruments. When designing with this device, allocate at least one decoupling capacitor pair (100 nF plus 4.7 uF) per power pin and route the XFBGA-121 inner balls to inner layers with via-in-pad or dog-bone fan-out to keep the breakout routable on a 4-layer PCB. Confirm pin muxing through the KSDK/PinTool configuration; mismatched peripheral assignments are the most common first-prototype failure on Kinetis designs. This page synthesizes distributor pricing, drop-in same-package K24 alternatives, and practical design notes not found in the manufacturer datasheet, giving procurement and design engineers a single reference for component selection.

見積もり お問い合わせ
MK24FN1M0VLL12 - 120MHz Cortex-M4F 1MB Flash MCU | NXP
MK24FN1M0VLL12

MK24FN1M0VLL12 - 120MHz Cortex-M4F 1MB Flash MCU | NXP

The NXP MK24FN1M0VLL12 is a Kinetis K24F microcontroller featuring an ARM Cortex-M4F core with FPU running at up to 120 MHz, integrating 1 MB of flash and 256 KB of SRAM in a 100-pin LQFP package. The device targets high-performance, low-power industrial and medical applications requiring large memory densities and flexible peripherals. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (flash/RAM), and programmable peripherals (UART, SPI, I2C, ADC, timers, GPIO) into one IC. Kinetis K24F parts belong to the NXP Kinetis family of ARM Cortex-M4 microcontrollers, which sit between 32-bit Cortex-M0+ low-power parts and Cortex-M7 high-performance parts in NXP's MCU portfolio. Key features include a full-speed USB 2.0 OTG controller with device/host/on-the-go modes, dual CAN (FlexCAN) interfaces for industrial networking, a 16-bit SAR ADC, multiple timers (FTM, PIT, RTC, LPTMR), and a low-power ARM Cortex-M4F core with DSP instructions and a single-precision floating-point unit. The 100-pin LQFP package offers 80 GPIO pins for mixed-signal designs. Technically, the MK24FN1M0VLL12 combines a Cortex-M4F core with DSP extensions, an integrated FPU, and a flexible low-power architecture with power and clock gating for peripheral activity. Stop currents are below 340 nA, run currents are 250 uA/MHz, and wake-up from Stop mode is 4.5 us. Full memory and analog operation down to 1.71 V extends battery life across a 1.71-3.6 V supply range. Typical applications include industrial control and HMI, medical patient monitoring, USB peripherals and instrumentation, building automation gateways, and CAN-based networked sensors. The large 1 MB flash makes it suitable for applications requiring over-the-air firmware updates and complex protocol stacks. When designing with this part, ensure the 100-pin LQFP land pattern matches the package and provide adequate bulk decoupling (4.7 uF + 100 nF) near each VDD/VSS pair. Configure the optional low-leakage wake-up unit to wake from specific pins while keeping the core in Stop mode for battery-powered designs.

見積もり お問い合わせ
MK24FN1M0VLL12R - 120MHz Cortex-M4 K24 MCU, 1MB Flash, USB | NXP
MK24FN1M0VLL12R

MK24FN1M0VLL12R - 120MHz Cortex-M4 K24 MCU, 1MB Flash, USB | NXP

The NXP MK24FN1M0VLL12R is a 32-bit ARM Cortex-M4F Kinetis K24 microcontroller running at 120 MHz with 1 MB of flash and 256 KB of SRAM, housed in a 100-pin LQFP (14x14 mm) package. It integrates a full-speed USB 2.0 OTG controller, dual CAN interfaces, and a rich analog and communication peripheral set aimed at high-performance industrial and medical applications. What is a Kinetis K24 microcontroller? The Kinetis K24 is a sub-family of NXP's ARM Cortex-M4F portfolio that targets low-power, cost-sensitive applications requiring high-performance processing efficiency and large memory densities. It sits within the broader Kinetis K-series hierarchy (K20/K22/K24/K64), combining the M4F core with floating-point unit, DMA, flexible low-power modes, and a wide range of serial interfaces. The K24 is designed for connected devices where USB, CAN, and Ethernet (via external PHY) are common requirements. Key features of the MK24FN1M0VLL12R include 1 MB program flash, 256 KB SRAM, full-speed USB 2.0 OTG with on-chip transceiver, dual CAN 2.0B controllers, three SPI modules, three I2C modules, four UART modules, 16-bit SAR ADC, 12-bit DAC, programmable delay block, low-power touch-sensing interface, and run currents as low as 250 uA/MHz. Stop-mode currents below 340 nA and 4.5 us wake-up times support battery-powered designs. The device uses a Cortex-M4F core with single-precision FPU, MPU, and DSP extensions. Its flexible clocking topology supports PLL, FLL, and external references, and an integrated 4-channel DMA engine offloads peripheral transfers. The 1.71-3.6 V wide supply range enables direct operation from Li-Ion, 2xAA, or regulated 3.3 V rails, simplifying system power architecture. Typical applications include industrial motor control and HMI, USB-CAN bridges, factory automation nodes, portable medical monitoring, low-power wireless sensor hubs, building automation, and connected consumer products. The K24 family balances compute throughput, memory headroom, and USB/CAN connectivity in one part. When designing with the MK24FN1M0VLL12R, plan decoupling with 100 nF plus 4.7 uF bulk capacitors near each supply pin. Use the KSDK/Kinetis SDK and Processor Expert/Pins tool for peripheral initialization; the device's low-leakage wake-up unit supports up to eight internal modules triggered from low-power modes. PCB layout should give the 100-LQFP thermal pad a copper pour of at least 25 mm^2 to keep junction temperature within range during peak CPU loads. This page synthesizes distributor pricing, drop-in K24-family alternatives, and PCB design guidance not found in the standalone datasheet, giving engineers a faster path from selection to prototype.

見積もり お問い合わせ
MK26FN2M0VMI18 - 180MHz Cortex-M4F 2MB MCU | NXP
MK26FN2M0VMI18

MK26FN2M0VMI18 - 180MHz Cortex-M4F 2MB MCU | NXP

The NXP Semiconductors MK26FN2M0VMI18 is a high-performance 32-bit Arm Cortex-M4F microcontroller operating up to 180 MHz, with 2 MB of program flash memory, 256 KB of SRAM, dual USB connectivity, and a 169-MAPBGA package measuring 9 x 9 mm. It is designed for industrial applications requiring substantial embedded storage, high processing performance, security, and low-power operation. A microcontroller is a programmable semiconductor system containing a processor core, memory, and integrated peripherals. Arm Cortex-M4F devices add DSP instructions and single-precision floating-point hardware to the Cortex-M architecture. The MK26 family therefore belongs to the hierarchy microcontroller, embedded processor, processor IC, and integrated circuit, serving as the central control element for connected industrial equipment. Verified device information highlights up to 180 MHz core operation, 2 MB of nonvolatile flash, and 256 KB of SRAM. The part integrates high-speed and full-speed USB physical layers, smart peripherals that retain operation in Stop modes, and enhanced security intended for industrial use. These features support complex control loops, local data processing, human-interface connectivity, and firmware-intensive applications. The 169-MAPBGA package offers high I/O density but requires careful PCB layout, escape routing, assembly capability, and thermal validation. Because the verified sources do not provide the complete pin mapping, electrical limits, or detailed USB transceiver characteristics, those values are not inferred here. Designers should use the official NXP documentation for pin assignments, decoupling, clocking, and PCB land-pattern requirements. Typical applications include industrial human-machine interfaces, USB-connected data loggers, factory equipment controllers, connected sensors, and embedded gateways. Its processing headroom and memory capacity make it suitable where concurrent control, communications, data buffering, and secure firmware handling are required. The dual USB architecture can support high-speed device communication alongside full-speed connectivity, subject to the device-specific implementation. A critical design consideration is package-level routing: the 169-MAPBGA requires advanced assembly and multilayer PCB capability, so pin escape, power integrity, and USB signal routing should be reviewed before layout begins. Verify the exact NXP pinout and reference design because the supplied web results do not expose a complete ball assignment. This page consolidates verified NXP and distributor information, practical package guidance, and clearly marked data gaps. It intentionally avoids invented pin names, electrical limits, lifecycle claims, or substitute specifications that cannot be established from the supplied evidence.

見積もり お問い合わせ
MK30DN5127ZVLQ10 100MHz Cortex-M4 512KB MCU | NXP
MK30DN5127ZVLQ10

MK30DN5127ZVLQ10 100MHz Cortex-M4 512KB MCU | NXP

The NXP Semiconductors MK30DN5127ZVLQ10 is a 32-bit Kinetis K30 mixed-signal microcontroller built on an Arm Cortex-M4 core, operating at 100 MHz with 512 KB of flash memory in a 144-LQFP 20 x 20 mm package. The verified listing identifies the K30 family as an LCD and mixed-signal MCU, while the related NXP product page identifies the K30 100 MHz segment LCD MCUs as Cortex-M4 devices with advanced analog integration and serial communication. A microcontroller, or MCU, is a semiconductor that integrates a processor core, program memory, data memory, peripherals, and interface logic into one device. The K30 series sits within the broader MCU hierarchy alongside 8-bit, 16-bit, and 32-bit controllers. Its 32-bit Cortex-M4 architecture, 512 KB program storage, and 100 MHz clock position it for embedded control, human-interface, communications, analog monitoring, and display-oriented systems. The verified information identifies the package as 144-LQFP and the programming interface as SWD and JTAG. It also associates the device with Ethernet, USB 2.0, a segment LCD controller, and a 16-bit ADC. These capabilities make it appropriate for connected industrial controls, data acquisition modules, medical and test instruments, operator panels, and embedded gateways. The available source material does not verify the exact ADC resolution, LCD segment count, SRAM capacity, supply range, or peripheral pin assignments, so those details must be confirmed in the manufacturer datasheet before design release. The target suffix contains the “7” after 512, distinguishing it from the related MK30DN512ZVLQ10 listing. Because the supplied search data does not formally establish that the two MPNs are pin-compatible, engineers should not substitute one for the other without checking the official K30 ordering information, pin multiplexing tables, electrical limits, and exposed programming pins. A practical design begins by assigning every LQFP ball to power, ground, reset, clock, programming, communications, analog, and LCD functions according to the manufacturer datasheet. Route sensitive analog inputs away from switching nodes, provide clean references and bypass capacitors, and verify signal levels against the exact device variant. Firmware must also use the matching K30 memory map, startup code, clock configuration, and peripheral drivers. This page consolidates verified distributor inventory, the official NXP family overview, package information, and engineering cautions that are not available from a raw distributor listing alone. It intentionally distinguishes verified facts from data that still requires confirmation, reducing the risk of an invalid drop-in substitution or incomplete production design.

見積もり お問い合わせ
MK30DN512ZVLK10 - Kinetis K30 100MHz Cortex-M4 MCU | NXP | 80-LQFP
MK30DN512ZVLK10

MK30DN512ZVLK10 - Kinetis K30 100MHz Cortex-M4 MCU | NXP | 80-LQFP

The NXP Semiconductors MK30DN512ZVLK10 is a 100 MHz ARM Cortex-M4 microcontroller with 512 KB Flash and 128 KB SRAM, housed in an 80-pin LQFP package. It belongs to the Kinetis K30 family, which adds a segment-LCD controller for human-machine-interface and metering applications. An ARM Cortex-M4 microcontroller is a 32-bit RISC processor core with single-precision floating-point, DSP extensions, and a deterministic interrupt controller. Cortex-M4 MCUs sit within the broader microcontroller taxonomy (microcontroller -> 32-bit MCU -> ARM Cortex-M -> Cortex-M4 -> Cortex-M4 with FPU) and dominate applications that require digital signal processing, precise motor control, and low-power operation. The Kinetis K30 subfamily adds integrated segment-LCD drive, which historically required a separate bias-generation IC. Key features include Cortex-M4 with FPU at 100 MHz (1.25 DMIPS/MHz), 512 KB embedded Flash, 128 KB SRAM, a segment-LCD controller supporting up to 8x40 segments, multiple Low-Power modes (Run, Wait, Stop, VLPR/VLPW/VLPS, LLS, VLLS), and 16-bit ADC, DAC, comparators, timers, USB, CAN, and multiple serial interfaces. The wide supply range 1.71 V to 3.6 V allows direct connection to single-cell Li-Ion or 3.3 V regulated rails. Internally, the MK30DN512ZVLK10 combines the Cortex-M4 core with NXP's peripheral platform including FlexMemory (configurable EEPROM and FlexNVM), 12-bit/16-bit ADC modules, programmable delay block, and a flexible low-power peripheral clocking scheme. The 80-LQFP package exposes a wide peripheral set on a 12x12 mm footprint compatible with industrial designs. Typical applications include industrial control, IoT edge nodes, segment-LCD display panels, motor control, single-phase metering, low-power portable instruments, and building automation HMIs. The combination of a capable Cortex-M4 DSP engine with integrated LCD drive makes it well-suited for battery-powered HMI products. When designing with this part, ensure decoupling on all VDD/VSS pairs and follow NXP's Kinetis K30 reference manual for FlexMemory and segment-LCD bias configuration. The lifecycle is flagged NRND on NXP's product page, so consider pin-compatible Kinetis successors or LPC families for new designs. This page synthesizes distributor pricing, lifecycle status, and pin-compatible drop-in alternatives not found in the manufacturer datasheet alone.

見積もり お問い合わせ
MK30DN512ZVLL10 - Kinetis K30 Cortex-M4 MCU 512KB | NXP
MK30DN512ZVLL10

MK30DN512ZVLL10 - Kinetis K30 Cortex-M4 MCU 512KB | NXP

The NXP Semiconductors MK30DN512ZVLL10 is a 32-bit ARM Cortex-M4 microcontroller from the Kinetis K30 family with 512 KB flash memory, 1.71 V to 3.6 V supply range, and 102 general-purpose I/O lines, housed in a 100-pin LQFP (14 x 14 mm, 0.5 mm pitch) surface-mount package. It integrates a segment LCD (SLCD) controller, making it a display-capable MCU for HMI applications. A microcontroller (MCU) is a single-chip computer that combines a processor core, non-volatile memory (flash), SRAM, and peripherals such as timers, serial interfaces, and ADCs. Within the system hierarchy, the MK30DN512ZVLL10 sits at the embedded-control level: ARM Cortex-M4 core, Kinetis K30 series, Kinetis MCU portfolio, NXP semiconductor product line. The Cortex-M4 architecture adds DSP instructions and single-cycle MAC for math-intensive embedded workloads. Key features include the 512 KB on-chip flash program memory, the integrated segment LCD driver peripheral that distinguishes the K30 from the K20 series, a rich peripheral set of serial interfaces (UART, SPI, I2C), analog-to-digital converters, and a multi-purpose clock generator (MCG) supporting internal and external clocking. Wide 1.71 V to 3.6 V operation supports direct 1.8 V, 2.5 V, and 3.3 V power rails. The Kinetis K30 series is built on the ARM Cortex-M4 core with a nested vectored interrupt controller (NVIC) and supports NXP's Kinetis software ecosystem, including MCUXpresso SDK and complementary tooling. The scalable Kinetis portfolio allows pin-compatible migration between family members with different flash sizes and peripheral mixes. Typical applications include segment-LCD human-machine interfaces (utility meters, thermostats, appliance panels), industrial control and monitoring nodes, and consumer embedded systems requiring low-power operation with on-chip display drive. The LCD controller eliminates a separate LCD driver IC, reducing BOM cost. Design consideration: verify the CPU clock configuration against the K30 family data sheet, and observe the 1.71 V minimum supply voltage during brownout conditions; flash write operations require the specified flash-programming voltage range. This page synthesizes distributor availability data, same-family drop-in alternatives, and practical design notes not consolidated in the manufacturer data sheet. Pricing is quote-based; specifications marked accordingly reflect gaps in the retrieved web data.

見積もり お問い合わせ
MK30DN512ZVMD10 - 100MHz ARM Cortex-M4 Kinetis K30 MCU | NXP
MK30DN512ZVMD10

MK30DN512ZVMD10 - 100MHz ARM Cortex-M4 Kinetis K30 MCU | NXP

The NXP MK30DN512ZVMD10 is a 32-bit ARM Cortex-M4 Kinetis K30 series microcontroller delivering 100 MHz core performance with 512 KB of embedded Flash and 144-MAPBGA (13x13 mm) package, integrating segment-LCD control alongside USB, CAN, and peripheral expansion for human-machine-interface and industrial embedded designs. Key features include ARM Cortex-M4 core with single-precision FPU and DSP instructions, 512 KB program Flash, 64 KB SRAM (with optional 32 KB FlexMem/RAM configuration), segment-LCD controller up to 8x40 segments, USB 2.0 full-speed on-the-go transceiver, CAN 2.0B controller, three SPI modules, two I2C modules, and an SDHC interface. The device operates from a 1.71 V to 3.6 V supply rail and supports an industrial temperature range of -40 C to +105 C. A Kinetis K30 microcontroller (MCU) is a low-power, mixed-signal 32-bit ARM Cortex-M4 device aimed at segment-LCD human-machine-interface applications such as smart thermostats, metering panels, e-bike dashboards, medical patient monitors, and industrial control HMIs. It belongs to the broader Kinetis family of ARM Cortex-M4 microcontrollers and inherits the standard Kinetis peripheral set including low-leakage wake-up units, FlexMemory, and a 16-bit ADC with hardware trigger support. The MK30DN512ZVMD10 architecture pairs the Cortex-M4 core with a multi-channel DMA controller, an external bus interface (FlexBus) for SRAM/PSRAM expansion, and segment-LCD glass-drive waveforms generated by a dedicated SLCD module. The 512 KB Flash supports FlexNVM partitioning to enable EEPROM emulation or additional program/data storage; the on-chip 16-bit ADC provides up to 24 single-ended channels with hardware averaging and DMA-driven sample sequencing. Typical applications include segment-LCD human-machine-interface panels, smart energy metering, USB-connected industrial peripherals, motor-control user-interface boards, and portable medical diagnostic devices. The integrated SLCD controller and rich connectivity mix reduce BOM cost by eliminating an external display driver IC. Designers should review Kinetis K30 reference manual and pin-mux tool when assigning segment-LCD, USB, and FlexBus signals simultaneously - the 144-BGA package exposes most peripherals but some share alternate pins that must be locked early in schematic capture. An external 32.768 kHz crystal and proper decoupling near each VDD/VSS pair are required for stable USB operation. This page synthesizes distributor pricing, K30-family drop-in alternatives, and practical design notes not consolidated on any single manufacturer datasheet.

見積もり お問い合わせ
MK30DX128VLL7 - Kinetis K30 72MHz Cortex-M4 MCU, 128KB Flash | NXP
MK30DX128VLL7

MK30DX128VLL7 - Kinetis K30 72MHz Cortex-M4 MCU, 128KB Flash | NXP

The NXP MK30DX128VLL7 is a Kinetis K30 family 32-bit ARM Cortex-M4 microcontroller running at up to 72 MHz with 128 KB of on-chip Flash and an integrated segment LCD (SLCD) controller, housed in a 100-pin LQFP package (14x14 mm). The K30 sub-family is designed as a scalable mid-performance entry point that combines DSP-class signal processing with rich analog integration and flexible low-power modes. A Kinetis K-series microcontroller is a Cortex-M4 based system-on-chip that integrates Flash, SRAM, mixed-signal analog, timers, communication peripherals and various human-machine-interface blocks (LCD, USB, CAN, segments) onto a single die. Within the broader Kinetis portfolio, K30 sits between the cost-optimized K10 and the higher-performance K40/K60/K70 families, sharing peripherals, tool chains and the same enablement ecosystem. The MK30DX128VLL7 includes hardware FPU, 16-bit ADC, 12-bit DAC, comparators and segment-LCD drive. Key features of the MK30DX128VLL7 include 72 MHz Cortex-M4 core with single-precision FPU, 128 KB Flash, 32 KB SRAM, segment LCD driver (up to 8x40 or 8x32 segments depending on package), USB 2.0 full-speed with on-chip transceiver, CAN, I2C, SPI, UART, 12-bit SAR ADC, 12-bit DAC, low-power run/wait/stop modes with VLLS retention. The LQFP-100 package exposes the full peripheral set, making it suited for cost-sensitive HMI designs. The architecture uses a Harvard bus with separate code and data paths and an integrated FPU; this allows deterministic interrupt latency while sustaining DSP-class math throughput for control loops. Internal high-accuracy reference and trim features reduce BOM cost and improve ADC accuracy. Typical applications include low-cost segment-LCD human-machine-interface panels, smart metering, home appliances, industrial control panels, building automation and white-goods user interfaces. The Cortex-M4 plus FPU enables these filters to be implemented efficiently with deterministic execution. Designers should plan for a 2.7-3.6V supply, a 32.768 kHz watch crystal for accurate RTC, and SWsupport all decoupling. Cap included PCB near the MCU. The datasheet defines maximum pin ratings - exceeding them causes permanent damage. This page synthesizes distributor pricing, lifecycle status, drop-in same-package alternatives within the Kinetis family and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
MK30DX256VLK7 - Kinetis K30 Cortex-M4 72MHz MCU | NXP
MK30DX256VLK7

MK30DX256VLK7 - Kinetis K30 Cortex-M4 72MHz MCU | NXP

The NXP Semiconductors MK30DX256VLK7 is a 32-bit ARM Cortex-M4 Kinetis K30 segment LCD microcontroller running at 72 MHz with 256 KB flash and 64 KB SRAM, housed in an 80-pin FQFP/LQFP (12x12 mm) package. A microcontroller unit (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals onto one die, forming the bottom layer of the embedded systems hierarchy: MCU -> embedded processor -> system-on-chip -> computing platform. The Kinetis K30 sub-family sits in the mid-performance tier of NXP's scalable Kinetis portfolio, differentiated from the K20 by an integrated segment LCD controller for direct drive of glass displays. Key features include the ARM Cortex-M4 core with DSP instructions and single-cycle MAC at up to 72 MHz, 256 KB of flash memory (256K x 8), 64 KB of SRAM, an integrated segment LCD controller, and a 1.71 V to 3.6 V operating voltage range per the manufacturer datasheet. The family provides high-precision analog integration, flexible low-power modes, and up to 32 MHz crystal oscillator plus 32 kHz crystal oscillator clocking options. Technically, the K30 combines the Cortex-M4 pipeline with NXP's mixed-signal peripheral set, supporting flash write across the voltage range and ambient temperature operation up to 105 C. The LCD controller offloads segment driving from software, freeing CPU cycles and reducing power compared with GPIO-driven multiplexing. Typical applications include utility metering (electricity, gas, water), handheld medical instruments, industrial HMI panels, and consumer appliances requiring a low-power LCD user interface. A key design consideration is that the VLK7 speed suffix denotes core voltage and clock configuration - verify the exact supply and temperature grade against the NXP ordering-info table before finalizing the power tree. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
MK30DX256ZVLQ10-FR - 100MHz Cortex-M4 MCU | NXP
MK30DX256ZVLQ10-FR

MK30DX256ZVLQ10-FR - 100MHz Cortex-M4 MCU | NXP

The NXP Semiconductors MK30DX256ZVLQ10-FR is a 32-bit Kinetis K30 microcontroller built around a 100 MHz Arm Cortex-M4 processor and supplied in a 144-LQFP package. The base device provides 256 KB of Flash memory, 64 KB of SRAM, advanced analog integration, serial communications, and segment-LCD support. Its combination of processing performance, mixed-signal resources, and a 144-pin gull-wing package makes it suitable for industrial control, instrumentation, human-machine interfaces, and embedded measurement systems. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, peripherals, and interface circuitry into one package. The K30 belongs to the hierarchy of embedded processor, microcontroller, semiconductor, and programmable control device. Compared with a discrete processor implementation, this device reduces board area and design effort by placing real-time control, communications, data acquisition, and display-interface functions on one device. Verified source information identifies a 100 MHz operating frequency, 256 KB Flash, 64 KB SRAM, segment-LCD capability, and a 144-LQFP 20 mm by 20 mm package. It also identifies 32 MHz and 32 kHz crystal oscillators, multi-purpose I/O, and advanced analog integration. These resources support control loops, sensor acquisition, serial links, and user-interface functions while keeping the design centered on one microcontroller. The Arm Cortex-M4 architecture provides a 32-bit control platform for embedded firmware, while the K30 family integrates peripherals intended for performance-oriented embedded systems. Exact peripheral assignments, pin multiplexing, memory behavior, electrical limits, and package dimensions must be confirmed against the manufacturer documentation before schematic capture. The available third-party datasheet result describes a 72-page K30 Sub-Family Data Sheet, but the specific -FR suffix characteristics were not independently enumerated in the supplied data. Typical uses include industrial panels with segment displays, sensor-conditioning controllers, data-acquisition equipment, building and automation controls, and communication-enabled embedded products. A 144-LQFP package exposes more I/O than smaller packages, which can simplify designs that need multiple serial, analog, timer, or display connections. Its larger footprint, however, requires more PCB routing and assembly area than a compact QFN device. When laying out the PCB, preserve short analog paths between external sensors, the MCU, and its reference network. Follow the manufacturer recommended decoupling, exposed thermal strategy, clock routing, and unused-pin guidance. Because this is a digital or mixed-signal microcontroller rather than a discrete power semiconductor, safe operating area data is not applicable. This product record consolidates current lifecycle information, verified source specifications, sourcing links, and engineering cautions. It also separates confirmed facts from unavailable values so engineers can assess the MCU before beginning layout or firmware development.

見積もり お問い合わせ
MK30DX256ZVMD10 - 32-Bit 100MHz Cortex-M4 MCU | NXP
MK30DX256ZVMD10

MK30DX256ZVMD10 - 32-Bit 100MHz Cortex-M4 MCU | NXP

The NXP Semiconductors MK30DX256ZVMD10 is a 32-bit ARM Cortex-M4 Kinetis K30 microcontroller operating up to 100 MHz, with 256 KB of Flash memory, 64 KB of SRAM, and a 144-ball MAPBGA package measuring 13 mm by 13 mm. It is a microcontroller, or MCU, combining a processor core, memory, communication peripherals, and mixed-signal interfaces in one integrated circuit. A microcontroller is a semiconductor device that executes embedded-control code and manages connected inputs and outputs. Within the product hierarchy, an MCU is a type of integrated circuit and embedded processor. The Kinetis K30 family is designed for industrial, consumer, communications, and human-machine-interface applications that require efficient 32-bit control alongside display and connectivity functions. The MK30DX256ZVMD10 provides 256 KB of Flash program memory and 64 KB of SRAM according to the verified product listings. Its listed peripheral set includes ADC and DAC channels, DMA controllers, PWM, CAN, I2C, IrDA, SD, SPI, UART and USART, I2S, LCD, low-voltage detection, power-on reset, and watchdog timer functions. These resources support mixed-signal measurement, motor and power control, communications, data acquisition, and graphical user-interface systems. The Cortex-M4 core supports a maximum clock frequency of 100 MHz, giving the device substantially more processing headroom than lower-frequency 8-bit or 32-bit MCUs. The K30 architecture combines deterministic embedded control with flexible serial connectivity and LCD-oriented features. This balance makes the part useful where a system needs more than basic GPIO control but does not require a higher-end application processor. Typical designs include industrial operator panels, medical-instrument control modules, communication equipment, data-acquisition systems, and compact consumer products with LCD displays. The listed 144-MAPBGA package reduces board area but requires careful escape routing and inspection because its fine-pitch balls are difficult to rework with conventional soldering methods. For a new PCB, use the manufacturer package drawing and pin-assignment documentation rather than inferring the 144-ball connectivity from a generic BGA layout. Confirm voltage rails, decoupling, exposed thermal requirements, clock implementation, programming interfaces, and LCD routing against the official K30 documentation before release. This product record combines verified distributor specifications, package information, source links, and engineering guidance to support component selection and PCB planning. Because the supplied search results do not expose a complete manufacturer price matrix or a verified pin-by-pin map, missing values are explicitly identified rather than guessed.

見積もり お問い合わせ
MK40DN512ZVLQ10-FR - Kinetis K40 100MHz Cortex-M4 MCU 512KB | NXP
MK40DN512ZVLQ10-FR

MK40DN512ZVLQ10-FR - Kinetis K40 100MHz Cortex-M4 MCU 512KB | NXP

The NXP MK40DN512ZVLQ10-FR is a Kinetis K40 sub-family 32-bit ARM Cortex-M4 microcontroller operating at up to 100 MHz, integrating 512 KB of program flash and 128 KB of SRAM on-chip. Housed in a 144-pin LQFP package (20 x 20 mm), the -FR suffix indicates the factory-tray packaging option. The device combines a high-performance core with Full-Speed USB 2.0 On-The-Go, Ethernet MAC, CAN, segment-LCD controller, and 16-bit ADC to address consumer, industrial, and medical embedded designs. What is a Kinetis microcontroller? A microcontroller is a single-chip computer that integrates a CPU core, program memory (flash), data memory (SRAM), and a rich set of peripherals (timers, communication controllers, analog blocks). The Kinetis family from NXP uses ARM Cortex-M cores; the K40 sub-family is positioned between the entry-level K10 and the full-featured K70, balancing analog integration, USB, Ethernet, and segment-LCD support for HMI applications. Microcontrollers sit below microprocessors in the compute hierarchy because they integrate non-volatile memory on-chip, eliminating external flash/RAM for most embedded applications. Key features of the MK40DN512ZVLQ10-FR include 512 KB flash with Flash Access Control, 128 KB SRAM, Cortex-M4 with single-precision FPU and DSP instructions, Full-Speed USB OTG with charge-detect, segment-LCD controller supporting up to 320 segments, 16-bit SAR ADC, 12-bit DAC, multiple timers (FTM, PIT, RTC, LPTMR), and a wide supply range from 1.71 V to 3.6 V supporting both 1.8 V and 3.3 V rails. Communications include Ethernet MAC, USB OTG, CAN, SPI, I2C, UART, and I2S. The MK40DN512ZVLQ10-FR uses the Cortex-M4 Harvard architecture with a 3-stage pipeline plus branch prediction, single-cycle MAC, and a hardware single-precision FPU. The 100 MHz operation delivers 1.25 DMIPS/MHz and 3.09 CoreMark/MHz, enabling DSP and floating-point workloads. The internal flash uses 16-bit access with 4 KB sector granularity, supporting byte-write, block-erase, and ECC-style integrity on higher-end Kinetis parts. The LCD controller supports both standard and enhanced waveform modes with charge redistribution. Typical applications include industrial segment-LCD human-machine interfaces (HMIs), USB medical dongles, point-of-sale terminals, smart energy metering with LCD, factory sensor hubs, and consumer appliances requiring segment-LCD display plus USB connectivity. Industrial temperature ranges of -40C to +105C support harsh embedded environments. When designing with this MCU, ensure the 144-LQFP (20 x 20 mm) PCB footprint and pad pattern are accommodated with adequate clearances for trace routing. The VLL/VLL1/VLL2 segment-LCD supply pins must be properly configured for charge-pump or external resistor bias. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes beyond the manufacturer datasheet.

見積もり お問い合わせ
MK40DN512ZVMD10 - 100MHz Cortex-M4 Kinetis K40 MCU | NXP
MK40DN512ZVMD10

MK40DN512ZVMD10 - 100MHz Cortex-M4 Kinetis K40 MCU | NXP

The NXP Semiconductors MK40DN512ZVMD10 is a Kinetis K40 32-bit ARM Cortex-M4 microcontroller running at up to 100 MHz with 512 KB flash memory and 128 KB SRAM, housed in a 144-pin MAPBGA (13 x 13 mm) ball grid array package. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory (flash for program storage, SRAM for data), and peripherals on one chip, sitting at the top of the embedded electronics hierarchy within the broader families of microcontrollers and system-on-chip devices. The Kinetis K series is NXP's high-performance MCU line based on the ARM Cortex-M4 core, which adds DSP instructions and hardware floating-point capability for computationally demanding embedded applications. Key features of the MK40DN512ZVMD10 include a 100 MHz ARM Cortex-M4 core with DSP functionality, an integrated full-speed USB 2.0 OTG controller, a segment LCD controller, and a supply voltage range of 1.71 V to 3.6 V. The part operates from 1.8V, 2.5V, or 3.3V rails, and provides 52 I/O ports per the digchip parameter listing. The DN suffix denotes the split-gate flash variant of the K40 family with 512 KB flash and 128 KB SRAM. Technically, the K40 family provides advanced analog integration and serial communication peripherals, per the chipdig datasheet summary, targeting consumer, industrial, and medical applications. The Cortex-M4 core delivers up to 100 MHz performance with a single-cycle multiply-accumulate unit supporting digital signal processing workloads, while the USB OTG controller removes the need for an external USB PHY in device-to-device designs. Typical applications include human-machine interface (HMI) panels using the segment LCD controller, USB-connected industrial instruments, and medical monitoring devices where integrated analog and communications reduce bill-of-materials count. Designers should note lifecycle status: NXP lists the MK40DN512ZVMD10 as NRND (Not Recommended for New Designs), so new projects should evaluate successors such as the Kinetis K6x while legacy designs can continue to source this part from distributors. This page synthesizes distributor pricing, drop-in alternatives, pin-level detail, and practical design notes not found in the manufacturer datasheet, adding procurement and cross-reference value beyond the NXP product page.

見積もり お問い合わせ
MK40DX128VLH7 - 72MHz ARM Cortex-M4 MCU | NXP | Kinetis K40
MK40DX128VLH7

MK40DX128VLH7 - 72MHz ARM Cortex-M4 MCU | NXP | Kinetis K40

The NXP Semiconductors MK40DX128VLH7 is a 32-bit ARM Cortex-M4 microcontroller from the Kinetis K40 family running at 72 MHz with 128 KB of flash memory and 64 pins in an LQFP 10x10 mm surface-mount package, operating from 1.8 V, 2.5 V, or 3.3 V supplies. According to NXP product information, this K40 Segment LCD MCU is active and in production. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals, forming the highest-volume class of embedded semiconductors. The Kinetis K40 family sits in the mid-performance tier of NXP's scalable Kinetis portfolio, above entry-level K series parts and below the high-performance K6x parts, offering USB and high-precision analog integration. Key features include the ARM Cortex-M4 core with DSP instructions at 72 MHz, 128 KB (128K x 8) on-chip flash, a segment LCD controller that differentiates K40 from K20 and K10 parts, USB connectivity, flexible low-power modes, and integrated high-precision analog peripherals. The temperature grade is industrial, and terminal form is gull-wing per distributor data. Technically, the Cortex-M4 pipeline executes single-cycle MAC operations, enabling efficient digital filtering and control loops. The flexiblepower architecture supports multiple run, wait, stop, and very-low-power modes, letting designers trade wake-up latency against standby current in battery-operated products. Typical applications include industrial HMI panels with segmented LCD displays, consumer appliances, metering products, and battery-powered instruments that need USB plus low-power standby. Design consideration: verify flash retention and supply-rail selection (1.8 V / 2.5 V / 3.3 V) against the NXP datasheet before finalizing the power tree, and confirm current lifecycle data since the estimated EOL date listed by third-party sources is 2029. This page synthesizes distributor pricing, cross-reference data, and drop-in alternative analysis not found in the manufacturer datasheet.

見積もり お問い合わせ
MK40DX128VMC7 - Kinetis K40 Cortex-M4 MCU 128KB Flash | NXP
MK40DX128VMC7

MK40DX128VMC7 - Kinetis K40 Cortex-M4 MCU 128KB Flash | NXP

The NXP MK40DX128VMC7 is a 32-bit ARM Cortex-M4 microcontroller from the Kinetis K40 sub-family, featuring 128KB of program Flash, 32KB SRAM, and integrated Full-Speed USB in a 121-pin MAPBGA (8x8 mm) package. Operating at up to 72 MHz, this MCU delivers deterministic performance for industrial and embedded applications including segment-LCD human-machine interfaces. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program and data memory, plus peripheral interfaces. The Cortex-M4 architecture extends Cortex-M3 with single-precision floating-point and DSP instructions, sitting between small Cortex-M0 microcontrollers and higher-end Cortex-M7 parts. Kinetis K40 specifically targets applications that need segment-LCD driving plus USB, integrating the bus controller, segment drivers, charge pump, and PWM-driven backlight control on-die, which removes external LCD controller ICs and shrinks BOM cost. Key features include ARM Cortex-M4 core with single-precision FPU and DSP extensions, 128KB Flash / 32KB SRAM memory, Full-Speed USB 2.0 On-The-Go controller, and a segment-LCD controller supporting up to 40 segments x 8 backplanes. The device includes a 16-bit SAR ADC, 12-bit DAC, multiple timer/PWM modules, and serial interfaces including CAN, I2C, IrDA, SPI, UART, and USB. Operational range spans 1.71V to 3.6V with industrial temperature grade -40C to +105C. Architecturally, the MK40DX128VMC7 leverages a low-leakage process with separate voltage rails for the core and I/O, allowing the analog and segment-LCD blocks to remain active while the CPU sleeps. The 72 MHz CPU frequency is paired with multi-layer bus matrix and direct memory access for deterministic peripheral throughput, and the integrated USB controller delivers Full-Speed host/device/OTG functionality without an external PHY. Typical applications include industrial segment-LCD HMI panels, USB-equipped metering devices, point-of-sale terminals, medical instruments requiring display readouts, and consumer appliances with built-in USB diagnostics. Designers commonly pair the device with NXP segment-LCD glass, external SPI Flash for data logging, and full-speed USB PHY connections. When designing with this MCU, ensure the 121-ball MAPBGA layout includes proper power-plane decoupling and ground stitching under the BGA, and verify segment-LCD bias generation resistor selection against the LCD glass specifications. This page synthesizes distributor pricing, drop-in alternatives, package-level comparison data, and practical design guidance that goes beyond what the manufacturer datasheet and distributor product pages typically present, giving you a single reference for sourcing and BOM decisions.

見積もり お問い合わせ
MK40DX256VLL7 - 256KB Flash 72MHz Cortex-M4 MCU | NXP
MK40DX256VLL7

MK40DX256VLL7 - 256KB Flash 72MHz Cortex-M4 MCU | NXP

The NXP MK40DX256VLL7 is an ARM Cortex-M4 Kinetis K40 microcontroller IC running at 72 MHz with 256KB (256K x 8) of Flash memory, 100-pin LQFP (14x14 mm) package, and integrated Full-Speed USB plus Segment LCD controller. The MK40DX256VLL7 is positioned as the mid-performance entry point of the Kinetis K family, sharing peripheral IP with higher-density K60/K70 parts. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals (USB, timers, ADC, segment LCD, GPIOs). The Cortex-M4 core adds single-precision FPU and DSP extensions, sitting in the hierarchy ARM Cortex-M -> 32-bit microcontroller -> embedded processor -> semiconductor. The K40 sub-family specifically targets human-machine interface (HMI) applications thanks to its integrated segment LCD driver. Key features of the MK40DX256VLL7 include 256KB of on-chip Flash, 64KB of SRAM (per the Kinetis K40 sub-family datasheet), Full-Speed USB 2.0 with on-chip transceiver, Segment LCD controller supporting up to several dozen segments, multiple low-power modes (Wait, Stop, VLPR), 16-bit SAR ADC, 12-bit DAC, and a wide supply voltage range of 1.71V to 3.6V. The 100-LQFP footprint is a mainstream, easy-to-proto surface-mount package with 0.5 mm pitch. On the architecture front, the K40 uses the Cortex-M4 with FPU, a 72 MHz bus matrix, and a flexible DMA engine (eDMA) that offloads memory-to-peripheral transfers. The integrated Segment LCD controller with charge pump and software-configurable contrast eliminates an external LCD driver, reducing BOM cost and PCB area for meter, appliance, and industrial-control designs. Typical applications include low-power segment-LCD metering, USB-capable industrial sensor nodes, home appliance HMIs, point-of-sale terminals, secure element accessories, and battery-powered IoT endpoints. Its combination of integrated USB and segment LCD is unusual and unique to the K40 family. When designing with this part, note that the LQFP-100 footprint is large (14x14 mm) compared to modern BGA Cortex-M parts; for new high-density designs consider Kinetis KE or LPC alternatives, but for legacy or HMI/LCD applications the MK40DX256VLL7 remains a strong fit. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ