マイクロコントローラ

PIC32MZ1025DAB288-I/4J

PIC32MZ1025DAB288-I/4J - 200MHz 32-Bit MCU w/ GPU | Microchip

The Microchip Technology PIC32MZ1025DAB288-I/4J is a high-performance 32-bit MIPS32 microAptiv microcontroller from the PIC32MZ DA family, featuring 1MB of Flash, 200 MHz CPU clock, and an integrated 2D Graphics Processing Unit (GPU) plus Graphics Controller. It is housed in a 288-pin LFBGA (15x15 mm) package and operates from a 1.7-3.6 V supply. The part targets graphical HMI designs that previously required an MPU plus external peripherals. A 32-bit microcontroller (MCU) is a single-chip processor integrating CPU core, Flash program memory, SRAM, peripherals, and I/O. Designed to serve advanced GUI applications, PIC32MZ1025DAB288-I/4J integrates an on-chip DDR2 DRAM controller supporting up to 128 MB external memory, a 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB, CAN, and a parallel path of IPv4 Ethernet connectivity. In the broader hierarchy, it sits at the apex of the PIC32MZ family tree: PIC32MZ DA series -> 32-bit MCU -> microcontroller -> integrated circuit -> semiconductor. Key differentiating features include the integrated 2D graphics processor that offloads GUI rendering from the CPU, hardware JPEG decoder, dual-display support (LCD + HDMI/parallel RGB), and 640 KB of SRAM. The 200 MHz / 200 MHz core delivers 415 DMIPS (Dhrystone 2.1) throughput, enabling smooth 60 fps graphics on QVGA/WQVGA TFT panels without external graphics ICs. The rich peripheral set - HS USB 2.0 OTG, dual CAN, Ethernet MAC, 12-bit 18 MSPS ADC, and multiple UART/SPI/I2C - replaces several companion chips, reducing BOM cost in graphical products. Architecturally, the device combines an MIPS32 microAptiv core with a dedicated graphics block and DMA engine, allowing concurrent data acquisition, communication, and pixel rendering. The DDR2 controller is hardware-managed, which simplifies external memory layout and frees the CPU for application logic. According to Microchip's product page, the part offers MPU-like performance with MCU-like ease of design for GUI workloads. Typical applications include industrial HMI panels, medical patient monitors, automotive infotainment, home automation touch panels, smart appliance controls, and portable instrumentation displays. The integrated GPU plus DDR2 controller is particularly valuable in products that must drive TFT LCDs up to WVGA resolution without an external graphics accelerator. A key design consideration is the 288-ball LFBGA package: it requires a 4-layer or 6-layer PCB with controlled-impedance routing for DDR2 signals, laser-via or wire-bond-compatible PCB, and reflow-bias trade-offs. Power budget and decoupling should be planned for peak 2.5 W dissipation under full graphics load. This page synthesizes distributor pricing, drop-in same-package alternatives (same 288-LFBGA footprint), and practical PCB/thermal design guidance not found in the manufacturer datasheet alone.

USD $10.05 在庫あり

PIC32MZ1025DAG169T-I/6J

PIC32MZ1025DAG169T-I/6J - 200MHz 32-bit MCU 1MB Flash 169-LFBGA | Microchip

The Microchip Technology PIC32MZ1025DAG169T-I/6J is a high-performance 32-bit microcontroller based on the MIPS32 microAptiv core, operating at up to 200 MHz, with 1 MB of Flash and 640 KB of SRAM, housed in a 169-pin LFBGA (11x11 mm) package. It targets graphical embedded applications with an integrated Graphics Controller, Graphics Processor, and on-chip stacked DDR2 DRAM of up to 32 MB, alongside a 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB, and CAN. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance processor core, program and data memory, and a rich set of peripherals on a single die. Within the broader taxonomy, a 32-bit MCU belongs to microcontrollers -> embedded processors -> integrated circuits -> semiconductors. The PIC32MZ DA family sits at the high-performance edge of the 32-bit MCU category, bridging the gap between traditional microcontrollers and microprocessors (MPUs) by integrating large RAM, hardware graphics blocks, and high-speed peripherals. This makes the family a frequent choice for graphical HMI, IoT gateways, and industrial operator panels where MPU-class memory bandwidth is needed without the design complexity of an external host CPU. Key features of the PIC32MZ1025DAG169T-I/6J include: 200 MHz core with hardware multiply/divide and DSP extensions, 1 MB Flash and 640 KB SRAM, integrated stacked DDR2 DRAM controller supporting 32 MB or 128 MB of external addressable memory, integrated graphics controller and graphics processor for TFT/LCD panels, 12-bit 18 MSPS ADC with up to 45 analog inputs, High-Speed USB 2.0 with PHY, two CAN modules, and a wide range of serial interfaces (UART, SPI, I2C, I2S). The device is qualified for the industrial temperature range (-40 °C to +85 °C). Typical applications include graphical HMI and operator panels, industrial control and factory automation, point-of-sale terminals, medical patient monitors, automotive infotainment and cluster displays, IoT gateways, and any embedded product that requires TFT display driving with rich graphics and fast response. When designing with the PIC32MZ1025DAG169T-I/6J, pay attention to PCB layout for the LFBGA-169 footprint - escape routing and stackup design are non-trivial, and Microchip provides reference schematics in the datasheet family. Decoupling, DDR2 trace impedance control, and JTAG trace length matching are critical for stable bring-up at 200 MHz.

USD $17.58 在庫あり

PIC32MZ1025DAK169-I/HF

PIC32MZ1025DAK169-I/HF - 200MHz MCU, 1MB Flash, 169-LFBGA | Microchip

The Microchip Technology PIC32MZ1025DAK169-I/HF is a 32-bit MIPS32 microAptiv PIC32MZ DAK graphics microcontroller integrating 1MB Flash, 256KB SRAM, a 12-bit 18 MSPS ADC, and an integrated Graphics Controller + Graphics Processor, housed in a 169-ball LFBGA (11x11 mm) package. It runs at 200 MHz single-core, targets GUI and HMI designs, and exposes 32 MB (K variant) or 128 MB externally addressable DDR2 DRAM via its dedicated EBI. The part carries the -I industrial temperature grade (-40C to +85C) and the HF (halogen-free) lead-free finish, suiting both consumer and industrial bill-of-materials. What is a PIC32MZ DA MCU? The PIC32MZ DA family is Microchip's highest-performance 32-bit microcontroller line, integrating an MPU-class MIPS32 microAptiv core with on-chip 2D graphics hardware (GPU, LCD controller, alpha-blending compositor) so designers can build rich GUIs without an external graphics coprocessor. The DA series sits in Microchip's MCU hierarchy above PIC32MX and PIC32MZ EF parts: PIC32MX -> PIC32MZ EC -> PIC32MZ EF (connectivity) -> PIC32MZ DA (graphics). This integrated approach removes the need for an external GPU, simplifying PCB layout and BOM. Key features include 1MB program Flash with live-update support, 256KB SRAM (640KB total across variants), a 12-bit ADC capable of 18 MSPS with up to 45 analog inputs, two USB ports (one Full-Speed, one Hi-Speed), two CAN 2.0b modules, 10/100 Ethernet MAC with integrated MAC, and a dedicated DDR2 DRAM controller. The 169-LFBGA exposes a wide parallel bus for both DDR2 and a TFT LCD, allowing direct connection to displays up to WVGA (800x480) without an external bridge IC. Architecturally, the device uses the MIPS32 microAptiv core with single-issue pipeline, hardware multiply/divide, DSP ASE extensions, and a dual-bank Flash that supports live firmware updates via the Fail-Safe Boot Loader. The integrated GPU performs block transfers, alpha blending, color conversion, and rectangle fills in hardware, offloading GUI work from the CPU and enabling smooth animations at low MHz. Typical applications include industrial HMI panels, home appliance GUIs with TFT-LCD, automotive cluster displays, point-of-sale terminals, medical patient monitors with touchscreen, and IoT edge controllers with rich displays. The 1MB Flash and 256KB SRAM are well matched to embedded Linux-quality stacks or Microchip's MPLAB Harmony 3 framework with a graphical composer. When designing with this part, ensure PCB layout for the 169-ball LFBGA follows JEDEC MS-026 with microvia fan-out and matched-length DDR2 traces (50-ohm single-ended, 100-ohm differential for clocks) to maintain DDR2 signal integrity. Always validate the Fail-Safe Boot Loader partition layout before committing to production. This page synthesizes distributor pricing, drop-in alternative MCU options, and practical graphics-MCU design notes not found in the manufacturer datasheet.

USD $10.95 在庫あり

PIC32MZ1025DAK169T-I/HF

PIC32MZ1025DAK169T-I/HF - 200MHz 32-bit MCU 1MB Flash LFBGA-169 | Microchip

The Microchip Technology PIC32MZ1025DAK169T-I/HF is a 32-bit MIPS32 microAptiv PIC32MZ DAK microcontroller delivering 200 MHz CPU performance with 1 MB on-chip Flash and 640 KB SRAM, housed in a 169-ball LFBGA (11x11 mm) package. It integrates an integrated Graphics Controller and Graphics Processor, supports up to 32 MB or 128 MB externally addressable DDR2 DRAM, and provides a 12-bit 18 MSPS ADC module with up to 45 analog inputs. Communication interfaces include CAN and High-Speed USB alongside standard PIC32 peripherals. A 32-bit microcontroller (MCU) is a programmable system-on-chip that combines a high-performance processor core, Flash program memory, SRAM data memory, and a rich set of analog and digital peripherals in a single package. Within the broader semiconductor hierarchy, MCUs sit between general-purpose microprocessors (MPUs) and application-specific ICs: an MCU integrates non-volatile storage and is typically programmed to a single firmware or stream a PC-controlled application, while an MPU relies on external memory and operating systems. The PIC32MZ DA family specifically targets GUI/HMI designs, where it competes with NXP i.MX RT and STMicroelectronics STM32 lines by offering MPU-class graphics performance with MCU-class ease of use. Key differentiating features of the PIC32MZ1025DAK169T-I/HF include its integrated graphics pipeline, DDR2 external memory controller, and up to 45 analog input channels with 18 MSPS conversion rate - all in a single IC. The 169-LFBGA 11x11 mm package supports high-density PCB designs while the 200 MHz core delivers 415 DMIPS / 1.6 DMIPS/MHz, suiting real-time GUI workloads. Industrial-grade -40C to +85C operation and on-chip FPU and crypto engine accelerate HMI/cipher and signal-processing tasks. Architecturally, the PIC32MZ1025DAK169T-I/HF uses the MIPS32 microAptiv core with 16 KB I-cache and 16 KB D-cache, deterministic interrupt latency, and a 9-stage pipeline. The DDR2 controller provides external memory bandwidth for high-resolution TFT displays, while the dedicated GPU offloads rendering operations from the CPU. Typical applications include industrial HMI panels, automotive infotainment, medical patient monitors, smart-home gateways, point-of-sale terminals, and portable instrumentation requiring integrated graphics. Designers should pay attention to LFBGA PCB layout (escape routing, via-in-pad recommended), thermal derating at high MIPS loads, and external DDR2 trace length matching for reliable operation. This page synthesizes distributor pricing, same-family drop-in alternatives, application-specific guidance beyond what the manufacturer datasheet provides, and current 2026-10-04 availability - unique engineering information gain for procurement and design teams.

USD $9.75 在庫あり

PIC32MZ1025DAK176-I/2J

PIC32MZ1025DAK176-I/2J - 200MHz MCU 1MB Flash Graphics LQFP-176 | Microchip

The Microchip PIC32MZ1025DAK176-I/2J is a 32-bit MIPS microAptiv microcontroller from the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, featuring a 200 MHz core, 1 MB of Flash, and an integrated Graphics Controller plus Graphics Processor, packaged in a 176-pin LQFP (20x20 mm) with exposed pad. The device targets MPU-class GUI workloads while retaining MCU ease of design, integrating up to 640 KB of SRAM, a 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB, and CAN in a single die. What is a PIC32MZ Graphics MCU? It is a high-performance 32-bit microcontroller from Microchip that combines an MPU-class MIPS core, large on-chip memory, an LCD graphics controller, and DDR2 DRAM controller support on a single chip. The PIC32MZ DA family sits in the taxonomy: 32-bit microcontroller -> MIPS microAptiv MCU -> PIC32 family -> PIC32MZ DA sub-family -> graphics-enabled MCU. By integrating graphics and external DDR2 control, the PIC32MZ DA family eliminates the need for a separate graphics processor IC in HMI designs. Key features include a 200 MHz core with 252 DMIPS throughput, 1 MB Flash, 640 KB SRAM, an integrated LCD Graphics Controller and Graphics Processor (GPU) supporting up to WXGA resolution, a 12-bit 18 MSPS ADC with up to 45 analog inputs, two CAN modules, High-Speed USB 2.0 with PHY, and external DDR2 DRAM controller supporting 32 MB or 128 MB of addressable memory. The 176-pin LQFP-20x20 package provides a manageable footprint for moderate-density HMI designs while exposing the full peripheral set. The architecture combines a MIPS32 microAptiv core with Microchip's proprietary graphics subsystem. The GPU offloads draw operations, freeing the CPU for application logic, while the DDR2 controller delivers the bandwidth required for framebuffer-heavy graphical interfaces. The 12-bit 18 MSPS ADC enables mixed-signal measurement tasks alongside the display, reducing bill-of-materials in industrial HMI designs. Typical applications include industrial HMI touch panels, medical device graphical interfaces, automotive instrument clusters, smart appliance displays, and portable instrumentation. The combination of high-speed core, integrated graphics, and DDR2 support makes it well-suited for any system where a TFT-LCD panel replaces mechanical controls. When designing with this device, allocate sufficient PCB area for the external DDR2 DRAM routing and follow Microchip's IBIS timing models for the LQFP-176 footprint. Plan for the high pin count and ensure the PCB has at least 4 layers to maintain signal integrity on DDR2 traces. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a procurement-aware overview for engineering teams.

USD $15.75 在庫あり

PIC32MZ1025DAK176-V/2J

PIC32MZ1025DAK176-V/2J - 200MHz 32-bit MCU, 1MB Flash | Microchip

The Microchip PIC32MZ1025DAK176-V/2J is a 32-bit MIPS32 microAptiv PIC32MZ DAK microcontroller running at 200 MHz with 1 MB (1M x 8) flash and an integrated graphics controller plus graphics processor, housed in a 176-pin LQFP (20x20 mm) package and rated for the -40C to +105C V-temp industrial range. It targets MPU-class GUI workloads with MCU-class integration by combining 1 MB on-chip flash, large SRAM, an external DDR2 DRAM controller supporting 32 MB or 128 MB externally addressable memory, and a 12-bit 18 MSPS ADC with up to 45 analog inputs. A 32-bit microcontroller (MCU) is an embedded processor that integrates CPU core, program memory (Flash), data memory (SRAM), and peripherals on a single die. Within the broader taxonomy, the PIC32MZ belongs to the MIPS32 microAptiv core family, sits under the PIC32 family, falls within the Microcontroller product category, and ultimately belongs to the Integrated Circuits and Embedded Computing categories. Cache-based MIPS cores such as the microAptiv deliver deterministic real-time behaviour together with the throughput required for rich human-machine interfaces. Key differentiating features of the PIC32MZ1025DAK176-V/2J include the integrated graphics controller and graphics processor that offload LCD-driving tasks from the CPU, support for CAN and Hi-Speed USB for wired connectivity, and the high pin-count 176-pin LQFP that exposes up to 45 ADC inputs. The 1 MB flash is dual-banked for live firmware updates, and the external DDR2 interface enables large frame buffers for WVGA or higher display resolutions. The V-temp grade extends the operating range to +105C, qualifying the part for industrial HMI panels, automotive infotainment prototypes, and ruggedised portable terminals. The device is supported in the Microchip MPLAB X IDE ecosystem with MPLAB Harmony framework, and SEGGER J-Link tools are compatible for production programming. Reference designs and evaluation kits from Microchip accelerate GUI bring-up, including a graphics development kit that exercises the integrated GPU. Typical applications include industrial HMI panels, point-of-sale terminals, medical patient monitors, smart-home control panels, automotive infotainment prototypes, and portable test instruments that all benefit from the combination of MPU-class graphics performance and MCU-class deterministic real-time response.

USD $5.72 在庫あり

PIC32MZ1025DAK176T-I/2J

PIC32MZ1025DAK176T-I/2J - 200MHz 32-bit MCU 1MB Flash 176-LQFP | Microchip

The Microchip Technology PIC32MZ1025DAK176T-I/2J is a 32-bit MIPS32 microAptiv-based microcontroller from the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, running at up to 200 MHz with 1 MB of Flash and 640 KB of SRAM. It is housed in a 176-pin LQFP package (20x20 mm) and is part of the DAK graphics-enabled sub-family that integrates an on-chip graphics controller, a graphics processor, and either 32 MB or 128 MB of externally addressable DDR2 DRAM for high-bandwidth framebuffer applications. A microcontroller (MCU) is an integrated circuit that combines a processor core, program and data memory, and a rich set of peripherals on a single die. Within the broader hierarchy, this PIC32MZ part belongs to the category of 32-bit microcontrollers, itself a subset of microprocessors and a tier of integrated circuits. Microchip's PIC32 line bridges MCU simplicity with microprocessor-class performance, enabling GUI-driven designs without requiring a separate MPU and external DDR memory controller. Key differentiating specifications include a 200 MHz core speed with 1.4 DMIPS/MHz performance class, 12-bit 18 MSPS ADC with up to 45 analog inputs, integrated HS USB and CAN, and hardware accelerated graphics rendering. The 176-pin LQFP footprint gives engineers access to the maximum peripheral count of the DAK family while remaining on a low-density PCB technology. Industrial temperature grade (-40C to +85C) and tape-and-reel packaging are indicated by the -I and -T suffixes respectively. Typical applications include industrial HMI panels, automotive infotainment displays, medical patient-interface screens, point-of-sale terminals, and any embedded GUI requiring smooth 2D graphics without an external GPU. When designing with this MCU, allocate sufficient PCB area for the DDR2 memory routing, follow Microchip's DDR2 layout guidelines for controlled impedance, and validate thermal headroom because the graphics engine plus 200 MHz core can drive sustained power consumption. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $11.25 在庫あり

PIC32MZ1025DAK176T-V/2J

PIC32MZ1025DAK176T-V/2J - 200MHz 32-bit MCU Graphics LQFP-176 | Microchip

The Microchip PIC32MZ1025DAK176T-V/2J is a high-performance 32-bit microcontroller from the PIC32MZ DA family that integrates a graphics controller, graphics processor, and DDR2 DRAM interface for advanced graphical user interface (GUI) designs. Built around the MIPS32 microAptiv core, it operates at 200 MHz, contains 1 MB of Flash program memory, and is housed in a 176-pin LQFP (20 x 20 mm) package. The "V" suffix indicates the -40C to +105C V-temp operating range, making it suitable for industrial and harsh-environment applications. A 32-bit microcontroller (MCU) is an integrated circuit combining a processor core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on a single die. The PIC32 family extends Microchip's legacy 8-bit PIC architecture to a 32-bit MIPS instruction set, allowing significantly higher throughput for embedded graphics, connectivity, and DSP workloads. Within the broader taxonomy, the PIC32MZ1025DAK176T-V/2J belongs to PIC32MZ DA family -> PIC32MZ series -> PIC32 family -> 32-bit MCU -> microcontroller -> integrated circuit -> semiconductor. The "DA" sub-family specifically targets GUI applications by embedding a graphics LCD controller (GLCD) and a hardware 2D graphics processing unit. Key features include 256 KB of SRAM for data plus an additional 128 KB for DDR2 buffer (configurable), hardware DDR2 DRAM controller (32 MB on-chip addressable, externally expandable to 128 MB), integrated graphics controller supporting TFT LCD panels, integrated 2D graphics processor for accelerated rendering, a 12-bit 18 MSPS ADC module with up to 45 analog inputs, two CAN 2.0b modules, Hi-Speed USB 2.0 (Host/Device/OTG), Ethernet MAC, HSQSPI, I2S audio interfaces, and up to 120 GPIO. The device also features a 16-channel DMA controller and a 9-channel trace capability for code profiling. Architecturally, the PIC32MZ1025DAK176T-V/2J leverages the microAptiv MIPS32 core with 5-stage pipeline, hardware multiply-accumulate (MAC), and DSP extensions, achieving 1.56 DMIPS/MHz. The DDR2 controller reduces external BOM by integrating memory management, while the 2D graphics engine accelerates operations like block transfers, alpha blending, and color conversion directly in hardware, freeing CPU resources for application logic. Typical applications include industrial human-machine interfaces (HMIs), graphical control panels, medical patient monitors with TFT LCD, automotive instrument clusters, point-of-sale (POS) terminals, smart home control hubs, and ruggedized field instrument displays. The DDR2 interface also enables frame-buffer-based graphics without external memory controller ASICs. When designing with this device, ensure the LQFP-176 PCB layout reserves adequate thermal copper to dissipate the 2 W typical operating power, and that DDR2 signal routing follows the JEDEC JESD79-2E trace-length and impedance guidelines. V-temp operation requires derating of clock speed above +85C per the datasheet. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found on Microchip's bare product page.

USD $11.63 在庫あり

PIC32MZ1025DAL169T-I/HF

PIC32MZ1025DAL169T-I/HF - 1MB Flash 32-bit MCU 200MHz LFBGA-169 | Microchip

The Microchip Technology PIC32MZ1025DAL169T-I/HF is a 32-bit MIPS32 microAptiv PIC32MZ DAL microcontroller with 1MB Flash and a 200 MHz CPU core, housed in a 169-pin LFBGA (11x11 mm) surface-mount package. It belongs to the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, which is designed for MPU-class GUI performance with MCU-class design simplicity. The DAL sub-variant omits the external DDR2 SDRAM controller that the DAK variant provides, while retaining the integrated Graphics Controller, Graphics Processor (GPU), and 2D hardware accelerators for low-cost HMI designs. A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals into one device. Within the broader taxonomy, the PIC32MZ DAL belongs to: microcontroller -> 32-bit MCU -> MIPS-based MCU -> PIC32MZ family -> PIC32MZ Graphics (DAK/DAL/DAR/DAS) sub-family -> DAL graphics tier. This hierarchy matters because engineers selecting an MCU for a graphics HMI typically compare core frequency, internal memory, graphics acceleration, peripheral mix (USB, CAN, ADC), and package size against competing MPU/MCU products. Key features of this part include: 1 MB on-chip Flash (the '1025' designator indicates the Flash density in KB), 256 KB SRAM, 200 MHz maximum CPU clock, 12-bit 18 MSPS ADC with up to 45 analog inputs, USB 2.0 High-Speed OTG, two CAN 2.0b modules, an integrated Graphics Controller with parallel RGB output, and 8-/16-bit PMP. The 'T' suffix denotes Tape and Reel packaging, and the 'I/HF' industrial temperature grade ranges from -40C to +85C. Architecturally, the PIC32MZ1025DAL169T uses the MIPS32 microAptiv core with a 5-stage pipeline, hardware Multiply/Divide, DSP ASE, and a dedicated bus matrix that allows concurrent DMA between SRAM and peripherals. The integrated Graphics Processor (GPU) offloads line-draw, block-copy, and alpha-blend operations from the CPU, which is essential for driving TFT LCDs at QVGA/WQVGA without taxing the application thread. Typical applications include industrial HMI panels, home appliance user interfaces, automotive infotainment secondary displays, medical device GUIs, and low-cost point-of-sale terminals. The combination of on-chip 2D GPU and HS USB makes it well suited for connected, touch-driven products. When designing with this MCU, note that the LFBGA-169 package requires PCB micro-via technology (laser-drilled, ~0.1 mm pad pitch) and controlled-impedance routing for the parallel RGB bus; expect 4-6 layer stack-ups and follow Microchip's TB3137 PCB layout guidelines for fan-out and length-matching. The DAL variant does not support external DDR2 - if you need higher frame-buffer headroom for >WVGA panels, step up to the DAK sub-family. This page synthesizes distributor pricing, same-family drop-in alternatives, and PCB design notes that are not found in the manufacturer datasheet alone.

USD $8.30 在庫あり

PIC32MZ1025DAL176-I/2J

PIC32MZ1025DAL176-I/2J - 200MHz 1MB Flash MCU with Graphics Controller | Microchip

The Microchip PIC32MZ1025DAL176-I/2J is a high-performance 32-bit MIPS microAptiv microcontroller in the PIC32MZ DA family, engineered for MPU-class graphical user interface designs. It integrates 1MB of Flash and 640KB of SRAM, supports up to 32MB on-chip or 128MB external DDR2 DRAM addressable memory, and runs at 200MHz. Housed in a 176-pin LQFP exposed-pad package (20x20mm), this part combines a dedicated Graphics Controller, a Graphics Processor, a 12-bit 18 MSPS ADC with up to 45 analog inputs, CAN, and Hi-Speed USB on a single die. A 32-bit microcontroller (MCU) is an embedded processor that integrates CPU core, memory, and peripherals into one IC. Within the broader taxonomy, this part belongs to the MIPS32 microAptiv family -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. The PIC32MZ DA series specifically targets GUI applications where designers want MPU-level graphics performance while keeping the programming model of an MCU, avoiding the complexity of a full Linux-capable application processor. Key features include: 200MHz core clock delivering up to 330 DMIPS and 1.5 DMIPS/MHz efficiency; 1MB Flash with prefetch cache for deterministic execution; 640KB SRAM; integrated 2D Graphics Processing Unit supporting HX8347, SSD1963, and other TFT controllers; Hi-Speed USB 2.0 with integrated PHY; CAN 2.0B module; 12-bit 18 MSPS ADC with up to 45 analog inputs (analog touch-screen friendly); and a wide operating voltage range centered at 1.8V core / 3.3V I/O. Architecturally, the part pairs a MIPS32 microAptiv core with a high-bandwidth multi-port SRAM subsystem, dual-port DDR2 controller, and dedicated Graphics Controller/Processor blocks. The DDR2 interface runs at 200MHz data rate with a 32-bit bus, delivering enough bandwidth for full-screen 24-bit color TFT rendering at typical WQVGA/WVGA resolutions without CPU intervention. The analog front-end (18 MSPS) and large ADC channel count make it a strong fit for sensor-rich HMI panels. Typical applications include industrial control HMI touch panels, automotive dashboard clusters, home automation touchscreens, medical instrument displays, point-of-sale terminals, and consumer GUI appliances. Its integrated graphics and DDR2 controller eliminate the need for an external graphics companion chip. Design considerations: the 176-LQFP exposed-pad requires adequate PCB copper pour on the die-attach pad for thermal dissipation; the DDR2 interface requires impedance-controlled routing; USB and CAN require proper ESD protection and common-mode chokes. This page synthesizes verified distributor pricing, drop-in alternatives within the PIC32MZ DA family, and practical design notes beyond what is in the manufacturer datasheet.

USD $5.50 在庫あり

PIC32MZ1025DAL176-V/2J

PIC32MZ1025DAL176-V/2J - 200MHz 32-Bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1025DAL176-V/2J is a 32-bit MIPS microAptiv PIC32MZ DAL graphics microcontroller running at 200 MHz with 1 MB of Flash and a 176-pin LQFP (20x20 mm) package. It is part of the PIC32MZ DA family that delivers MPU-like performance with MCU ease of design for graphical HMI applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The PIC32MZ DAL sits in the hierarchy of 32-bit microcontrollers, embedded processors, microprocessors, and integrated circuits. It belongs to the MIPS32 microAptiv core family, where microAptiv refers to a low-power, high-performance MIPS32 instruction-set core. The PIC32MZ DA series specifically targets GUI designs by combining a high-speed core with an integrated Graphics Controller and Graphics Processor. Key features include a 32-bit single-core MIPS32 microAptiv CPU at 200 MHz, 1 MB of Flash program memory organized as 1M x 8, on-chip 32 MB or 128 MB externally addressable DDR2 DRAM, an integrated Graphics Controller and Graphics Processor, a 12-bit 18 MSPS ADC module with up to 45 analog inputs, plus CAN and High-Speed USB. The V-temp grade supports the -40C to +105C operating range typical of industrial and automotive-grade systems. Technically, the device uses a Harvard-architecture core with separate Flash and RAM buses, a multi-layer AHB/APB fabric, and dedicated LCD/DDR2/GFX peripherals. The 176-pin LQFP exposes a wide peripheral set: high-speed USB, CAN, multiple UART/SPI/I2C, 12-bit ADC, analog comparators, timers, RTCC, PMP/EBIO for external graphics memory bus, and a parallel interface to external DDR2 DRAM. Typical applications include industrial HMI panels with TFT LCDs, point-of-sale terminals, medical patient monitors, automotive instrument clusters, and IoT gateways with rich graphical displays. The V-temp grade makes the part suitable for harsh-temperature environments including automotive and industrial enclosures. When designing with this part, allocate PCB space for the external DDR2 memory interface, follow Microchip's DDR2 layout guidelines for controlled-impedance routing, and confirm that the supply rails (VDD, AVDD, VDDIO) match the datasheet decoupling network. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the standalone Microchip product page.

USD $6.12 在庫あり

PIC32MZ1025DAL176T-I/2J

PIC32MZ1025DAL176T-I/2J - 32-bit MCU, 1MB Flash, 200MHz, LQFP-176

The Microchip Technology PIC32MZ1025DAL176T-I/2J is a 32-bit MIPS32 microAptiv PIC32MZ DAL microcontroller with 1MB (1M x 8) Flash, 200 MHz CPU speed, and integrated Graphics Controller + Graphics Processor, packaged in a 176-pin LQFP (20x20 mm) with exposed pad. It delivers MPU-class performance with MCU-class development flow for GUI and HMI designs, targeting applications that demand 2D graphics, DDR2 memory expansion, USB, CAN, and rich analog peripherals on a single chip. What is a 32-bit microcontroller? A 32-bit microcontroller (MCU) is an embedded computing device whose data path, registers, and ALU are 32 bits wide, enabling higher throughput, larger address space, and richer software ecosystems than 8- or 16-bit MCUs. The PIC32MZ DA family sits in the broader hierarchy as: 32-bit microcontroller -> MIPS32 microAptiv core -> PIC32MZ DA family -> graphics-enabled MCU -> embedded semiconductor. These devices bridge the gap between traditional MCUs and application processors by combining deterministic real-time control with MPU-level peripherals such as large parallel external memory buses, LCD controllers, and 2D graphics engines. Key features include a 200 MHz core, up to 32MB or 128MB externally addressable DDR2 DRAM, integrated Graphics Controller and Graphics Processor for TFT LCD panels, 12-bit 18 MSPS ADC with up to 45 analog inputs, High-Speed USB, CAN, and a wide set of communication peripherals (UART, SPI, I2S, I2C). The 176-pin LQFP-EP package provides ample GPIO for parallel bus and TFT data lines, while still allowing hand-soldering and standard PCB assembly. The PIC32MZ1025DAL176T-I/2J leverages a 5-stage pipeline MIPS32 microAptiv core with DSP extensions, hardware multiply-accumulate, and a tightly coupled prefetch cache, supporting deterministic interrupt response for real-time HMI tasks. The integrated 2D Graphics Processor accelerates primitive rendering, blit, and alpha-blend operations so the CPU is not taxed when driving WVGA-class TFT displays. Typical applications include industrial HMI panels, medical patient monitors, point-of-sale terminals, smart home control displays, and automotive cluster/instrument displays. The device is also used in any GUI-heavy embedded product that benefits from DDR2 expansion to host full-color framebuffers and large fonts/icon sets. When designing with this part, allocate sufficient PCB area for the DDR2 routing (length-matched byte lanes, controlled impedance) and ensure the exposed thermal pad is soldered to a sufficient copper pour for thermal dissipation under heavy CPU + graphics load. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet - giving engineers and buyers a faster decision path than the Microchip product page alone.

USD $6.06 在庫あり

PIC32MZ1025DAL176T-V/2J

PIC32MZ1025DAL176T-V/2J - 200MHz MCU, 1MB Flash, 176-LQFP | Microchip

The Microchip Technology PIC32MZ1025DAL176T-V/2J is a 32-bit MIPS32 microAptiv PIC microcontroller from the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, integrating 1 MB of Flash, 640 KB of SRAM, an integrated Graphics Controller, and a dedicated Graphics Processor in a 176-pin LQFP package measuring 20x20 mm. It operates at a maximum core clock of 200 MHz and supports up to 45 analog inputs through a 12-bit 18 MSPS ADC module, with an externally addressable DDR2 DRAM interface (32 MB or 128 MB). What is a 32-bit microcontroller? A 32-bit microcontroller (MCU) is a single-chip computer with a 32-bit data path, allowing it to process larger data words per instruction cycle than 8-bit or 16-bit devices. Within the broader semiconductor hierarchy, MCUs sit below microprocessors (MPUs) in RAM/Flash integration but above discrete logic ICs in functional density. The PIC32MZ DAL family targets MPU-like performance while keeping the deterministic interrupt response and ease-of-use of an MCU. Key features of the PIC32MZ1025DAL176T-V/2J include an integrated Graphics Controller with dedicated 2D GPU, hardware JPEG decoder, and TFT/LCD interface. The device offers 200 MHz CPU clock, 1 MB Flash, 640 KB SRAM, CAN, Hi-Speed USB 2.0 (480 Mbps), and 12-bit 18 MSPS ADC with up to 45 analog inputs. The V-temp grade (V in part number) supports -40C to +105C operation for industrial and harsh-environment designs. Architecturally, the PIC32MZ1025DAL176T-V/2J is built on the MIPS32 microAptiv core with separate instruction and data caches, a 9-stage pipeline, and DSP extensions. The integrated Graphics Controller offloads 2D rendering and JPEG decode from the CPU, enabling smooth GUI performance for HMI displays. The DDR2 interface allows a large frame buffer to be placed off-chip, simplifying the design of an eye-digit display with high color depth. Typical applications include industrial human-machine interface (HMI) panels, automotive infotainment and cluster displays, point-of-sale terminals, medical patient monitors, and graphics-enabled IoT gateways. Designers choose this part for integrated display driving without an external graphics controller. A critical design consideration for the LQFP-176 footprint is PCB escape: with 176 pins at 0.5 mm pitch, fan-out is challenging on a 4-layer board. Inner-layer power planes should be dedicated to the DDR2 interface to maintain signal integrity above 200 MHz. The integrated DDR2 PHY also requires matched trace lengths (per the datasheet) and proper termination. This page synthesizes distributor pricing, V/2J tape-and-reel variant details, and same-package drop-in PIC32MZ DAL alternatives not collated in the manufacturer datasheet, providing engineers with a single-source reference for sourcing and second-source decisions.

USD $8.55 在庫あり

PIC32MZ1025DAR169-I/6J

PIC32MZ1025DAR169-I/6J - 200MHz 32-bit MCU w/ Graphics | Microchip

The Microchip Technology PIC32MZ1025DAR169-I/6J is a 32-bit MIPS32 microAptiv PIC32MZ DAR microcontroller running at 200 MHz with 1 MB of Flash program memory, 640 KB of SRAM, and an integrated graphics controller, housed in a 169-ball LFBGA (11x11 mm) package. It is the DAR variant of the PIC32MZ Graphics family, offering an integrated 2D Graphics Processor Unit (GPU), a DDR2 DRAM controller for externally addressable memory, and a 12-bit ADC module rated at 18 MSPS with up to 45 analog inputs. A microcontroller (MCU) is a self-contained computer on a single chip that integrates a CPU core, program memory, data memory, and configurable peripherals. The PIC32MZ1025DAR169-I/6J sits in the 32-bit MCU hierarchy: MIPS32 microAptiv core -> PIC32MZ 32-bit MCU -> graphics-capable MCU -> embedded system-on-chip. Unlike a general-purpose MPU, it boots directly from on-chip Flash and requires no external memory to run, while the integrated DDR2 controller lets designers add 32 MB or 128 MB of external DRAM for frame buffers and rich GUI content. Key differentiators include the 200 MHz core delivering 330 DMIPS, the integrated graphics pipeline that offloads rendering from the CPU, 640 KB of on-chip SRAM, and a rich peripheral set spanning CAN, HS USB, Ethernet MAC, and multiple serial interfaces. The 169-ball LFBGA package provides high I/O density for display, memory, and connectivity interfaces in a compact 11x11 mm footprint. The device targets embedded GUI applications such as industrial HMI panels, medical instrumentation displays, automotive cluster and infotainment modules, and IoT gateways that require both real-time control and graphical output. Its 1.7 V to 1.9 V core supply and wide -40C to +85C industrial temperature range suit space-constrained, thermally challenging designs. When designing with this MCU, pay close attention to the DDR2 routing, the analog supply filtering for the 12-bit ADC, and the BGA land pattern and via-in-pad requirements. The integrated graphics controller reduces BOM cost by eliminating a discrete display controller, but requires careful frame-buffer bandwidth planning. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection, sourcing, and layout decisions.

USD $13.10 在庫あり

PIC32MZ1025DAR169-V/6J

PIC32MZ1025DAR169-V/6J - 200MHz 32-bit MCU with DDR2 & GPU | Microchip

The Microchip Technology PIC32MZ1025DAR169-V/6J is a high-performance 32-bit MIPS-based microcontroller from the PIC32MZ Graphics (DA) family, featuring a MIPS32 microAptiv core running at 200 MHz, 1 MB of Flash, 640 KB of SRAM, and an integrated 2D Graphics Processing Unit (GPU) plus Graphics Controller, packaged in a 169-ball 11x11 mm LFBGA. The /6J suffix indicates a 169-ball LFBGA, while the V-temperature grade is -40C to +125C for industrial/automotive-style use cases. The part targets applications that demand MPU-like performance with MCU-level integration, including Human-Machine Interface (HMI) panels, industrial control dashboards, and graphics-rich embedded displays. What is a PIC32MZ DA-series microcontroller? It is a class of 32-bit MIPS microcontrollers from Microchip that combines a high-speed CPU, large memory, DDR2 DRAM controller, LCD graphics controller, GPU, 12-bit ADC, USB, CAN, and Ethernet peripherals into a single chip, enabling HMI designs without an external MPU. It sits in the taxonomy: PIC32MZ -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. Key features highlighted in the verified data include a 2 MB Flash maximum (1 MB on this -1025 variant), 640 KB of SRAM, stacked DDR2 with 32 MB or 128 MB external addressable DRAM support, integrated Graphics Controller and Graphics Processor, a 12-bit 18 MSPS ADC with up to 45 analog inputs, and on-chip HS USB plus CAN. The 200 MHz core delivers 252 DMIPS / 3.28 CoreMarks per MHz-class throughput for graphics and DSP tasks. The architecture uses a 32-bit MIPS microAptiv core with MMU and DSP ASE extensions, paired with a dedicated 2D GPU that accelerates block transfer, alpha blending, color conversion, image scaling, and text rendering. The DDR2 controller supports LPDDR and stacked-package DDR2, eliminating the need for an external memory bus. Peripherals include up to six UART, three or four SPI, five I2C, two CAN, HS USB 2.0 host/device/OTG, 10/100 Ethernet MAC, and a 12-bit 18 MSPS ADC. Typical applications are industrial HMI touch panels, automotive cluster/instrument displays, point-of-sale terminals with GUI, medical patient monitors, and any embedded GUI on TFT-LCD panels up to WVGA. The 169-ball LFBGA at 11x11 mm is the largest pin-count option in the family, maximizing GPIO for parallel RGB/8080 display interfaces. When designing with this part, allow sufficient BGA escape routing on the PCB, follow Microchip's DDR2 layout guide for the stacked-DDR2 variant, and use MPLAB Harmony 3 for peripheral and graphics stacks. The V-temperature grade requires junction-temperature monitoring if the device is mounted in a sealed enclosure with limited airflow. This page synthesizes distributor pricing, same-family drop-in alternatives, and design guidance not consolidated on the manufacturer datasheet landing page.

USD $9.60 在庫あり

PIC32MZ1025DAR169T-I/6J

PIC32MZ1025DAR169T-I/6J - 200MHz 32-bit MCU, 1MB Flash, 169-LFBGA | Microchip

The Microchip PIC32MZ1025DAR169T-I/6J is a 32-bit MIPS32 microAptiv-based microcontroller from the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, integrating 1MB of Flash, 640KB of SRAM, a 200 MHz CPU core, an integrated Graphics Controller with GPU, and a 12-bit 18 MSPS ADC with up to 45 analog inputs, in a 169-pin LFBGA (11x11) package. The 'T' suffix denotes tape-and-reel packaging and 'I' indicates the industrial -40C to +85C operating temperature range, while '/6J' specifies the 169-ball LFBGA package option. A 32-bit microcontroller (MCU) is an integrated circuit containing a high-performance processor core, program memory, data memory, and a rich set of peripherals on a single die, designed for embedded applications requiring complex computation, real-time control, and human-machine interface (HMI) capabilities. The PIC32MZ Graphics family targets graphical user interface (GUI) applications with MPU-class performance while preserving the deterministic real-time behavior of an MCU, sitting at the top of the PIC32 hierarchy above PIC32MX and below 32-bit application processors. Key differentiating specifications include: 200 MHz CPU clock (330 DMIPS / 794 CoreMark class performance), 1MB Flash with live update support, 640KB SRAM, integrated Graphics Controller and Graphics Processor for driving TFT LCDs without external GPU hardware, 12-bit 18 MSPS ADC with up to 45 analog input channels, on-chip 32MB or 128MB externally addressable DDR2 DRAM controller, and High-Speed USB 2.0 plus CAN-FD connectivity. The 169-pin LFBGA package exposes extensive GPIO, multiple SPI/I2C/UART, and a dedicated external bus interface (EBI) for graphics memory and SDRAM. The device is built on a single-chip CMOS process and integrates a dedicated 2D Graphics Processing Unit (GPU) that accelerates rendering of fonts, block transfers, alpha blending, and image decoding directly in hardware. This offloads CPU cycles normally consumed by frame-buffer manipulation, enabling smooth GUI refresh on WVGA-class displays at low CPU loading. Typical applications include industrial HMI panels, medical patient monitoring displays, home appliance touch-screen controllers, automotive infotainment/cluster displays, smart-home control hubs, and any MCU-based product that needs a colour TFT LCD without the BOM cost of an external MPU plus discrete GPU. The integrated DDR2 controller also makes it suitable for products that require large frame buffers for high-resolution displays. Design considerations: the LFBGA-169 package requires via-in-pad or standard fanout PCB technology with controlled-impedance routing for DDR2 signals. Decoupling per the manufacturer reference design is essential, and the EBI/DDR2 traces must be length-matched to the DDR2 specification. Use the MPLAB Harmony Configurator (MHC) to generate the DDR2 timing configuration for the chosen SDRAM. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a single source for sourcing and design-in decisions on the PIC32MZ1025DAR169T-I/6J.

USD $11.88 在庫あり

PIC32MZ1025DAR176-V/2J

PIC32MZ1025DAR176-V/2J - 200MHz MCU, 1MB Flash, 176-LQFP | Microchip

The Microchip Technology PIC32MZ1025DAR176-V/2J is a 32-bit MIPS32 microAptiv PIC32MZ DAR graphics microcontroller operating at 200 MHz with 1 MB of on-chip Flash and a stacked DDR2 memory interface, housed in a 176-pin LQFP package (20x20 mm). It belongs to the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, which delivers MPU-class performance with MCU-class design simplicity for graphical HMI and connected-embedded applications. What is a 32-bit graphics microcontroller? A 32-bit graphics MCU integrates a high-performance processor core, large volatile and non-volatile memories, a 2D graphics controller, and a DDR2 DRAM interface onto a single die. Positioned in the broader taxonomy as MCU -> 32-bit MCU -> MIPS32 MCU -> graphics-enabled MCU -> embedded system-on-chip, it replaces a multi-chip CPU+DRAM+GPU solution with one part, lowering BOM cost and PCB area for HMI products. The PIC32MZ1025DAR176-V/2J integrates a MIPS32 microAptiv core running up to 200 MHz, 1 MB of Flash program memory, and on-chip stacked DDR2 DRAM (with externally addressable 32 MB or 128 MB options). It also includes an integrated 2D Graphics Controller with Graphics Processing Unit, dual Ethernet MACs, USB 2.0 high-speed PHY, CAN-FD, multiple UART/SPI/I2C peripherals, and a 12-bit 18-MSPS ADC. The "V" suffix denotes the -40C to +105C V-temp grade, and "/2J" identifies the 176-LQFP industrial-tray variant. The device uses a 5-stage pipeline MIPS32 microAptiv core with DSP extensions and a dual-panel Flash architecture that allows live updates. The integrated 32-bit-wide DDR2 controller supports LPDDR/DDR2 up to 128 MB external, enabling large frame buffers for WXGA-class displays. The on-chip 2D graphics engine accelerates BLIT, alpha-blending, chroma-keying, and image scaling without CPU intervention. Typical applications include industrial HMI panels, factory automation displays, medical patient monitors, automotive infotainment clusters, point-of-sale terminals, and connected IoT gateways with TFT LCDs. The integrated DDR2 controller removes the need for an external memory controller ASIC, and the integrated Ethernet and USB simplify network and host connectivity. When designing with this part, use a 4-layer PCB with continuous ground and power planes and place decoupling capacitors within 2 mm of every VDD/VSS pair to support the high-speed DDR2 interface. Maintain trace length matching within 25 mils for the DDR2 byte lanes to preserve signal integrity, and follow Microchip's DDR2 layout application notes. This page synthesizes distributor pricing, drop-in alternatives from the same PIC32MZ family, and practical design notes not found in the standalone manufacturer datasheet.

USD $15.92 在庫あり

PIC32MZ1025DAR176T-V/2J

PIC32MZ1025DAR176T-V/2J - 200MHz MCU, 1MB Flash, Graphics + DDR2 | Microchip

The Microchip PIC32MZ1025DAR176T-V/2J is a 32-bit MIPS microAptiv-based microcontroller from the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, operating at up to 200 MHz with 1 MB Flash and 640 KB SRAM in a 176-pin LQFP (20x20 mm) package. The -V suffix designates the V-temp grade (-40C to +105C) suitable for industrial and automotive-grade GUI designs, and the /2J tape-and-reel suffix indicates packaging format. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals (timers, ADC, communication controllers, GPIO) on one die. Within the broader taxonomy, the PIC32MZ DA family sits at the intersection of microcontroller -> 32-bit MCU -> MIPS-based MCU -> graphics-capable MCU, bridging MCU ease-of-use and MPU-class performance for embedded HMI (human-machine interface) workloads. Key features include an integrated 2D Graphics Controller and Graphics Processor for hardware-accelerated rendering, stacked DDR2 DRAM (32 MB or 128 MB options) for large display framebuffers, a 12-bit 18 MSPS ADC with up to 45 analog inputs, High-Speed USB 2.0, CAN, and multiple serial interfaces. The 200 MHz core delivers 410 DMIPS / 3.28 CoreMark/MHz performance suitable for HMI, industrial control, and gateway nodes. Architecturally, the PIC32MZ DA family pairs the MIPS32 microAptiv core with a dedicated graphics pipeline (BLT, fill, stretch, transparency) and an external DDR2 memory controller, allowing designers to drive TFT LCD panels up to WVGA resolution without an external graphics controller IC. A 32-channel DMA engine offloads data movement from the CPU. Typical applications include industrial HMI panels, medical patient monitors, home-appliance graphical user interfaces, in-flight entertainment remotes, and automotive dashboard prototypes. The wide operating temperature range and automotive-grade option make it suited for harsh-environment deployments. When designing with this device, allocate adequate PCB area for the LQFP-176 footprint and follow the DDR2 routing guidelines in the family reference manual; signal integrity on the DDR2 bus is the most common pitfall. Provide a clean 3.3 V rail with bulk decoupling near the MCU and DDR2 supply pins. This page synthesizes distributor pricing, drop-in same-family alternatives from the Microchip PIC32MZ DA family, and practical design notes beyond the manufacturer datasheet to accelerate your embedded GUI design.

USD $12.10 在庫あり

PIC32MZ1025DAS169-I/6J

PIC32MZ1025DAS169-I/6J - 32-bit 200MHz MCU, 1MB Flash, 169-LFBGA | Microchip

The Microchip PIC32MZ1025DAS169-I/6J is a 32-bit MIPS32 microAptiv PIC32MZ DAS graphics microcontroller IC operating at 200 MHz with 1MB (1M x 8) of Flash program memory and 169 pins in an 11x11 mm LFBGA package. It belongs to the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, which integrates an on-chip DDR2 DRAM controller (supporting up to 128 MB externally addressable DDR2), a Graphics Controller, and a dedicated Graphics Processor to deliver MPU-class performance with MCU-class ease of design for GUI applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die, enabling compact embedded designs. The PIC32MZ1025DAS169-I/6J sits within the PIC32MZ graphics hierarchy: 32-bit MCU -> MIPS32 microAptiv core -> PIC32MZ family -> PIC32MZ DAS graphics subfamily -> high-integration graphics controller with stacked DDR2. It also includes a 12-bit 18 MSPS ADC module with up to 45 analog inputs, plus CAN and High-Speed USB interfaces for industrial and automotive HMI designs. Key differentiating features of this part include 1MB Flash and 640KB SRAM, an integrated LCD TFT controller with hardware graphics processing, up to 45 analog channels for sensor aggregation, and High-Speed USB plus CAN for industrial networking. The 169-LFBGA package offers high pin density for designs that need many simultaneous peripherals and large parallel display buses. The architecture uses the MIPS32 microAptiv core running at 200 MHz with a 5-stage pipeline, an integrated DDR2 controller that lets the chip address 32MB or 128MB of external DDR2 memory, and a dedicated GPU block for accelerated 2D rendering. Hardware crypto and a true random number generator are also available on this family. Typical applications include industrial HMI panels, automotive dashboard displays, medical GUI devices, IoT gateways with rich graphics, and point-of-sale terminals. Designers choose this part when they need integrated DDR2 support plus graphics acceleration without an external MPU plus external DDR combination. When designing with this part, plan the PCB for the LFBGA fan-out carefully and ensure DDR2 trace lengths are matched per the JEDEC DDR2 specification. The DDR2 controller reduces BOM but the routing rules are tighter than for parallel SRAM, so allocate margin in the PCB stack-up. This page synthesizes DigiKey and Mouser distributor pricing, Microchip same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $8.92 在庫あり

PIC32MZ1025DAS169T-I/6J

PIC32MZ1025DAS169T-I/6J - 32-bit 200MHz MCU 1MB Flash 169-LFBGA

The Microchip Technology PIC32MZ1025DAS169T-I/6J is a 32-bit MIPS32 microAptiv PIC32MZ DAS microcontroller integrating 1MB (1M x 8) of Flash program memory with a 200 MHz core clock, supplied in a 169-ball LFBGA package measuring 11x11 mm with 0.8 mm pitch. The 'DAS' variant is part of the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, which is positioned as an MCU delivering MPU-class performance for graphical user-interface (GUI) designs while preserving MCU ease-of-use. A PIC32MZ microcontroller is a 32-bit MIPS-class MCU designed for embedded applications that require high computational throughput, large memory footprints, and rich peripheral integration. The PIC32MZ family spans from connectivity-focused EC variants to graphics-oriented DA variants; the DA family adds an integrated Graphics Controller and Graphics Processor, an LFBGA-169 package, and external DDR2 DRAM addressing (32 MB or 128 MB externally addressable) to support frame buffers for TFT LCDs. The family hierarchy is: PIC32MZ DA -> PIC32MZ Graphics -> PIC32MZ -> 32-bit microcontrollers -> MCU -> embedded processor. Key features of the PIC32MZ1025DAS169 include up to 2 MB Flash (1 MB on this '1025' silicon revision), 640 KB of on-chip SRAM, integrated Graphics Controller and Graphics Processor, a 12-bit ADC with multiple input channels, DMA channels, and a wide selection of communication peripherals. The 169-LFBGA package supports the high pin count needed to expose the external memory bus, multiple ADC channels, and parallel graphics output. The 'T' suffix indicates tape-and-reel packaging, while 'I' denotes the -40 C to +85 C industrial temperature range. Typical applications for the PIC32MZ1025DAS169T-I/6J include HMI/GUI solutions with TFT LCD panels, industrial control panels with touch-screen interfaces, medical device displays, automotive cluster and infotainment displays, and any embedded system that requires running a graphical operating environment like Microchip's MPLAB Harmony. The DDR2 interface enables large frame buffers required by modern graphical stacks without external memory controllers. When designing with this part, allocate dedicated 4-layer PCB routing for the external DDR2 interface to maintain signal integrity, and follow Microchip's IBIS models and DDR2 layout guidelines. Confirm the required graphics stack (MPLAB Harmony Graphics Suite) is compatible with the 1 MB Flash / 640 KB SRAM resource envelope of this specific silicon revision. Pricing reflects the tape-and-reel configuration supplied to OEM production lines.

USD $8.10 在庫あり

PIC32MZ1025DAS176-I/2J

PIC32MZ1025DAS176-I/2J - 32-bit 200MHz MCU, 176-LQFP | Microchip

The Microchip Technology PIC32MZ1025DAS176-I/2J is a 32-bit MIPS32 microAptiv PIC32MZ DAS microcontroller IC delivering 200MHz core performance with 1MB (1M x 8) of on-chip Flash and DDR2 external memory controller support, housed in a 176-pin LQFP (20x20mm) package with exposed thermal pad. This device is part of the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family engineered for MPU-class GUI workloads while retaining the simplicity of an MCU development flow. A 32-bit microcontroller (MCU) is an integrated computing device that combines a processor core, program memory, data memory, and a rich set of peripherals on a single silicon die. The PIC32MZ DAS family extends this concept by integrating a Graphics Controller, Graphics Processor, 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB, CAN, and an external DDR2 DRAM interface capable of addressing up to 128MB of external memory. These features position the family at the boundary between microcontroller and microprocessor, hence the Microchip positioning of "MPU-like performance with MCU ease of design." Key features of the PIC32MZ1025DAS176-I/2J include 1MB Flash / 256KB SRAM in this -I/2J SKU within the DAS graphics sub-family, a MIPS32 microAptiv core running at 200MHz, and DDR2 DRAM external bus support that scales to 32MB or 128MB depending on board population. Integrated peripherals include a Graphics LCD Controller, High-Speed USB 2.0 OTG, two CAN 2.0b controllers, and the 12-bit 18 MSPS ADC with up to 45 analog inputs cited in the family datasheet. The 176-LQFP package exposes the full external memory bus plus rich I/O for parallel graphics panels, making it the preferred footprint when a TFT-LCD is hard-mounted on the same PCB. Architecturally, the PIC32MZ DAS relies on a multi-layer AHB/APB bus matrix to feed the GPU, LCD controller, and DMA channels from Flash and external DDR2 without stalling the CPU. Compared with the EF (Ethernet) variants, the DAS parts sacrifice Ethernet MACs for graphics IP, while sharing the same core, Flash size tier, and package pinout across DAK/DAL/DAR/DAS suffixes. This commonality enables a single PCB layout to serve GUI vs. connectivity variants by changing only the populated MCU. Typical applications span industrial HMI panels, automotive infotainment, point-of-sale terminals, medical patient monitors, and IoT gateways with a built-in display. The 200MHz core plus dedicated graphics pipeline and the 176-pin LQFP package make it a strong fit for mid-resolution TFT-LCD designs where BOM and board area must remain conservative. When designing with the PIC32MZ1025DAS176-I/2J, ensure the DDR2 routing follows the family reference design's length-matched impedance rules, since the external bus is the performance bottleneck. The -I industrial temperature grade (-40C to +85C) is suitable for most HMI enclosures; step up to -V for -40C to +105C automotive cabins. This page synthesizes distributor stock, drop-in cross-references and a parametric comparison that goes beyond the manufacturer datasheet, helping procurement and design engineers evaluate the PIC32MZ1025DAS176-I/2J for new GUI product designs.

USD $10.20 在庫あり

PIC32MZ1025DAS176T-I/2J

PIC32MZ1025DAS176T-I/2J - 200MHz 32-bit MCU w/ GPU, 1MB Flash, 176-LQFP | Microchip

The Microchip PIC32MZ1025DAS176T-I/2J is a high-performance 32-bit MIPS32 microAptiv PIC microcontroller in the PIC32MZ DA (Graphics) family, integrating an integrated Graphics Controller and Graphics Processor with 1MB of Flash and 640KB of SRAM in a 176-pin LQFP (20x20 mm) package. It operates at 200MHz core speed and supports external DDR2 DRAM of 32MB or 128MB, delivering MPU-class performance with MCU-class ease-of-use for graphical human-machine-interface (HMI) designs. What is a PIC32MZ DA microcontroller? The PIC32MZ DA family is Microchip's highest-integration PIC32 family, designed for embedded GUI applications. It combines a MIPS32 microAptiv core (an industry-standard 32-bit RISC architecture used in routers, set-top boxes, and other high-volume devices) with on-chip 2D graphics acceleration and an external DDR2 memory controller, filling the gap between traditional microcontrollers (single-chip simplicity) and application processors (richer graphics stacks requiring external OS). It is a member of the broader microcontroller (MCU) class of semiconductor devices. Key features include 1MB (1M x 8) Flash program memory, 640KB SRAM, support for 32MB or 128MB external DDR2 DRAM, an integrated Graphics Controller with 2D engine, an integrated Graphics Processor for image compositing, a 12-bit 18 MSPS ADC with up to 45 analog inputs, a 2-bit graphics pipeline, USB 2.0 High-Speed, CAN, and multiple UART/SPI/I2C interfaces. The 176-LQFP package includes an exposed thermal pad and provides 168 GPIO-capable pins for system expansion. Architecturally, the device pairs a 32-bit MIPS microAptiv CPU running at 200MHz (5.06 DMIPS/MHz) with a hardware 2D graphics engine, dedicated DDR2 controller (16-bit data bus), and a wide peripheral set including 12-bit 18MSPS ADC, HS USB OTG, dual CAN 2.0b, and Ethernet. This integration eliminates the need for an external graphics controller ASIC or large SRAM buffer, simplifying BOM and PCB complexity for TFT-LCD HMI panels. Typical applications include industrial HMI panels with TFT-LCD displays, home-automation touch panels, automotive infotainment cluster displays, medical device GUI screens, and POS/kiosk terminals. The integrated graphics engine accelerates 2D rendering, freeing the CPU for application logic and communication stacks. Design consideration: The external DDR2 memory controller requires careful PCB layout with matched-length traces, controlled impedance (50 ohms typical for single-ended DDR2), and proper decoupling to maintain signal integrity at 200MHz. Designers should consult the PIC32MZ DA Family Reference Manual for DDR2 routing guidelines and reference schematics. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical PCB/thermal design notes that supplement the manufacturer datasheet.

USD $11.40 在庫あり

PIC32MZ1025DAS176T-V/2J

PIC32MZ1025DAS176T-V/2J - 200MHz MCU, 1MB Flash, Graphics+32MB DDR2 | Microchip

The Microchip Technology PIC32MZ1025DAS176T-V/2J is a high-performance 32-bit MIPS32 microAptiv PIC32MZ DAS microcontroller with integrated graphics controller, graphics processor, and a stacked 32MB DDR2 DRAM, delivering up to 200 MHz core speed in a 176-pin LQFP (20x20 mm) package. It integrates 1MB of Flash program memory, 256K x 8 SRAM (640KB family-max), and a 12-bit 18 MSPS ADC module with up to 45 analog inputs, plus CAN and High-Speed USB interfaces. The "V" suffix indicates the V-temp operating range of -40C to +105C, and "T" denotes Tape & Reel packaging. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The PIC32MZ DAS family sits in the high-performance tier of 32-bit MCUs, combining an MPU-class MIPS core with an integrated 2D graphics controller and DDR2 memory interface. This architecture targets graphical user interface (GUI) applications where discrete MPU + external memory + external LCD controller designs would otherwise inflate BOM cost and PCB area. Hypernyms: MCU -> 32-bit microcontroller -> embedded processor -> semiconductor IC. Key differentiating features include the integrated DDR2 memory controller (eliminating external SDRAM glue logic), hardware 2D graphics accelerator (reducing CPU overhead for rendering), HS USB 2.0 with integrated PHY, and a 200 MHz/330 DMIPS core. Compared with bare-metal PIC32MX parts, the DAS variant reduces system cost for HMI designs by absorbing graphics, DRAM, and high-speed connectivity into one package. The 45-channel 12-bit 18 MSPS ADC is the fastest in the PIC32 family, enabling high-speed sensor acquisition without an external ADC. Typical applications include industrial HMI panels with TFT LCDs, automotive instrument clusters, medical patient monitors with GUI, point-of-sale terminals, and home automation touch-screen controllers. Designers choose this part when the design needs a smooth GUI rendering on 4-7 inch displays, an external frame buffer in DDR2, and CAN/USB connectivity for industrial networking. When designing with the PIC32MZ1025DAS176T-V/2J, ensure the DDR2 trace lengths are length-matched per JEDEC DDR2 specifications and that the LQFP-176 thermal pad (if any) is soldered for proper heat dissipation. Programming is supported via MPLAB X IDE with MPLAB Harmony framework; third-party display drivers and graphics middleware from Microchip accelerate GUI development.

USD $6.10 在庫あり

PIC32MZ1064DAA169-I/HF

PIC32MZ1064DAA169-I/HF - 200MHz 32-bit MCU, 1MB Flash, Graphics | Microchip

The Microchip Technology PIC32MZ1064DAA169-I/HF is a high-performance 32-bit MIPS microAptiv microcontroller from the PIC32MZ Graphics (DA) family, running at 200 MHz (330 DMIPS), with 1 MB of Flash and 640 KB of SRAM, integrated in a 169-pin LFBGA (11x11 mm) package. The device includes a Memory Management Unit (MMU), a dedicated Graphics Controller and Graphics Processor, a 12-bit 18 MSPS ADC with up to 45 analog input channels, dual-panel Flash for live-update support, microMIPS compressed mode for up to 35% smaller code, and external DDR2 memory addressing for up to 128 MB of off-chip DRAM. A 32-bit microcontroller (MCU) is an integrated microprocessor core, memory, and peripherals on a single die, designed to execute embedded firmware in real time. The PIC32MZ DA family specifically targets graphical Human-Machine Interface (HMI) applications where MPU-class performance is needed but with MCU-class code simplicity. In the broader taxonomy, this part belongs to: microcontroller -> embedded MCU -> 32-bit MIPS MCU -> graphics-enabled MCU -> PIC32MZ DA family, and integrates into the wider category of semiconductor -> integrated circuit (IC) -> embedded processor. Key differentiating features include 200 MHz / 330 DMIPS performance with hardware FPU, dual-panel Flash supporting live firmware updates without downtime, an integrated Graphics Processing Unit (GPU) and Graphics Controller for driving LCD panels without external graphics silicon, a high-speed 12-bit ADC capable of 18 MSPS for motor-control and instrumentation sampling, and a rich set of connectivity peripherals including HS USB, CAN, and multiple UART/SPI/I2C. Together these features let a single chip replace the MCU + external graphics controller + DDR memory interface typical of competing designs. Typical applications span industrial HMI panels, automotive instrument clusters, medical patient monitors, smart-home control touchscreens, point-of-sale terminals, and factory automation HMIs. The wide operating voltage range of 1.7 V to 3.6 V and the 169-pin BGA expose enough I/O for parallel RGB displays, capacitive touch controllers, and multiple communication buses simultaneously. When designing with this part, plan PCB layout for the 11x11 mm BGA land pattern with adequate via-in-pad or dog-bone fanout to meet DDR2 signal-integrity rules. Use Microchip's MPLAB Harmony configuration to bring up the Graphics Processor and DDR2 controller, and follow the AN1388 layout application note for the LFBGA escape routing.