PIC32MZ1025DAS176-I/2J - 32-bit 200MHz MCU, 176-LQFP | Microchip
部品番号: PIC32MZ1025DAS176-I/2J ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $14.85 | $14.85 |
| 10 | $13.62 | $136.20 |
| 100 | $12.1 | $1,210.00 |
| 500 | $11.05 | $5,525.00 |
| 1,000 | $10.2 | $10,200.00 |
PIC32MZ1025DAS176-I/2J 概要
A 32-bit microcontroller (MCU) is an integrated computing device that combines a processor core, program memory, data memory, and a rich set of peripherals on a single silicon die. The PIC32MZ DAS family extends this concept by integrating a Graphics Controller, Graphics Processor, 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB, CAN, and an external DDR2 DRAM interface capable of addressing up to 128MB of external memory. These features position the family at the boundary between microcontroller and microprocessor, hence the Microchip positioning of "MPU-like performance with MCU ease of design."
Key features of the PIC32MZ1025DAS176-I/2J include 1MB Flash / 256KB SRAM in this -I/2J SKU within the DAS graphics sub-family, a MIPS32 microAptiv core running at 200MHz, and DDR2 DRAM external bus support that scales to 32MB or 128MB depending on board population. Integrated peripherals include a Graphics LCD Controller, High-Speed USB 2.0 OTG, two CAN 2.0b controllers, and the 12-bit 18 MSPS ADC with up to 45 analog inputs cited in the family datasheet. The 176-LQFP package exposes the full external memory bus plus rich I/O for parallel graphics panels, making it the preferred footprint when a TFT-LCD is hard-mounted on the same PCB.
Architecturally, the PIC32MZ DAS relies on a multi-layer AHB/APB bus matrix to feed the GPU, LCD controller, and DMA channels from Flash and external DDR2 without stalling the CPU. Compared with the EF (Ethernet) variants, the DAS parts sacrifice Ethernet MACs for graphics IP, while sharing the same core, Flash size tier, and package pinout across DAK/DAL/DAR/DAS suffixes. This commonality enables a single PCB layout to serve GUI vs. connectivity variants by changing only the populated MCU.
Typical applications span industrial HMI panels, automotive infotainment, point-of-sale terminals, medical patient monitors, and IoT gateways with a built-in display. The 200MHz core plus dedicated graphics pipeline and the 176-pin LQFP package make it a strong fit for mid-resolution TFT-LCD designs where BOM and board area must remain conservative.
When designing with the PIC32MZ1025DAS176-I/2J, ensure the DDR2 routing follows the family reference design's length-matched impedance rules, since the external bus is the performance bottleneck. The -I industrial temperature grade (-40C to +85C) is suitable for most HMI enclosures; step up to -V for -40C to +105C automotive cabins.
This page synthesizes distributor stock, drop-in cross-references and a parametric comparison that goes beyond the manufacturer datasheet, helping procurement and design engineers evaluate the PIC32MZ1025DAS176-I/2J for new GUI product designs.
ドロップイン代替品: PIC32MZ1025DAS176-I/2J — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC32MZ1025DAS176-I/2J （同一形状・フットプリント） — 相違点: CAN, USB, Package, Graphics Controller, Operating Temperature.
クイック比較ツール — 並列比較する代替部品を選択:
PIC32MZ1025DAK176-I/2J
✅ ドロップイン✓ 在庫あり
$15.75 / 個
データシートを見る →PIC32MZ1025DAL176-I/2J
✅ ドロップイン✓ 在庫あり
$5.5 / 個
データシートを見る →PIC32MZ1025DAS176-V/2J
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC32MZ1025DAR176-V/2J
✅ ドロップイン✓ 在庫あり
$15.92 / 個
データシートを見る →PIC32MZ1025DAA176-I/2J
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC32MZ1025DAS176-I/2J 最大定格＆電気的特性
| Core Architecture | MIPS32 microAptiv |
| Family | PIC32MZ Graphics (DAK/DAL/DAR/DAS) |
| Sub-family Suffix | DAS (graphics, no Ethernet MAC) |
| Core Speed | 200 MHz |
| Program Flash | 1 MB (1M x 8) |
| SRAM | 256 KB (per family data sheet SKU table) |
| External Memory Bus | DDR2 DRAM controller, up to 32MB on-chip addressable / 128MB externally addressable |
| ADC | 12-bit, 18 MSPS, up to 45 analog inputs |
| Graphics IP | Integrated Graphics Controller + Graphics Processor |
| USB | High-Speed USB 2.0 OTG |
| CAN | 2x CAN 2.0b controllers |
| Operating Voltage | 1.8V core supply family |
| 動作温度 | -40C to +85C (Industrial, -I grade) |
| パッケージ | 176-LQFP, 20x20 mm, exposed pad |
| 実装タイプ | Surface Mount |
| RoHS ステータス | Compliant |
PIC32MZ1025DAS176-I/2J 176-lqfp, 20x20 mm, exposed pad ピン配置ガイド
PIC32MZ1025DAS176-I/2J (176-lqfp, 20x20 mm, exposed pad パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: PIC32MZ1025DAS176-I/2J.
詳細は データシート をご参照ください。
主な用途
PIC32MZ1025DAS176-I/2J の用途: 6 件s: Industrial HMI Touch Panels, Automotive Infotainment Displays, Point-of-Sale Terminals, Medical Patient Monitors, Smart Home Control Panels, Industrial IoT Gateways with Display.
Industrial HMI Touch Panels
The PIC32MZ1025DAS176-I/2J is engineered for industrial HMI panels where a 200 MHz MIPS32 microAptiv core drives the GUI stack while the integrated Graphics Controller and Graphics Processor offload TFT-LCD rendering. Its 1 MB internal Flash stores the application and asset images, and the DDR2 external memory bus scales up to 32 MB addressable for full-screen frame buffers at WVGA resolution. The 176-LQFP package exposes parallel LCD data lines, plus CAN, HS USB, and the 12-bit 18 MSPS ADC for back-panel sensing. The -I grade -40C to +85C rating covers factory-floor enclosures, and the family datasheet DS60001565D provides the timing budgets for capacitive touch controllers typically paired with this MCU.
おすすめ
Automotive Infotainment Displays
The PIC32MZ1025DAS176-V/2J variant at -40C to +105C automotive grade makes the PIC32MZ DAS family a fit for cabin-mounted infotainment clusters and HVAC control panels. The -I/2J industrial SKU in this listing can be used during development before switching to the -V/2J automotive grade for production. The integrated Graphics Controller drives TFT panels up to WVGA without an external GPU, and the dual CAN 2.0b controllers interface directly with the vehicle CAN-FD gateway. The DDR2 controller addresses up to 128 MB external for map data caches, and HS USB supports CarPlay/AndroidAuto bridging. Reference the family datasheet DS60001565D for AEC-Q100 compliance notes on the -V variant.
おすすめ
Point-of-Sale Terminals
POS terminals need a responsive touch-driven GUI plus reliable peripheral connectivity, which the PIC32MZ1025DAS176-I/2J delivers via its 200 MHz MIPS32 core, HS USB 2.0 OTG, and CAN 2.0b controllers. The 1 MB Flash stores the payment application and TLS certificates, while the DDR2 interface can host larger transaction logs. The integrated 12-bit 18 MSPS ADC with up to 45 analog inputs reads battery telemetry and printer feedback sensors. The 176-LQFP package supports a parallel TFT-LCD panel and capacitive touch I2C bus simultaneously. Reference the family datasheet DS60001565D for EMV-compliant touch firmware integration patterns.
おすすめ
Medical Patient Monitors
Bedside patient monitors combine a high-resolution TFT display with multiple analog channels, and the PIC32MZ1025DAS176-I/2J fits this profile via its 12-bit 18 MSPS ADC with up to 45 analog inputs and integrated Graphics Controller. The 200 MHz MIPS32 core runs waveform rendering, alarm logic, and the user interface simultaneously. The DDR2 controller supports frame buffers for real-time ECG/EEG/SpO2 traces, while HS USB isolates the host interface from the medical sensor bus. The 176-LQFP package exposes enough I/O to drive both a primary TFT and a secondary status display. Reference DS60001565D for IEC 60601-related EMI/ESD layout guidance.
おすすめ
Smart Home Control Panels
Wall-mounted smart home control panels require a vibrant TFT-LCD, capacitive touch, and wireless gateway connectivity, and the PIC32MZ1025DAS176-I/2J provides the GUI foundation with its integrated Graphics Controller and 200 MHz core. The HS USB 2.0 OTG connects a Wi-Fi/BLE co-processor for Matter/Thread/Zigbee bridging, while CAN 2.0b supports wired HVAC bus integration. The 176-LQFP package fits behind a 4-7 inch capacitive touch panel, and the 1 MB Flash stores the local UI assets and Matter fabric credentials. Reference the family datasheet DS60001565D for capacitive touch firmware integration patterns.
おすすめ
Industrial IoT Gateways with Display
Edge IoT gateways increasingly integrate a local TFT for diagnostics, and the PIC32MZ1025DAS176-I/2J serves both the GUI and gateway functions. The 200 MHz core runs TLS and protocol stacks, the HS USB interfaces LTE/Wi-Fi modems, and CAN 2.0b connects to industrial fieldbuses. The 176-LQFP package fits a 5-inch TFT with capacitive touch, while the DDR2 controller hosts large MQTT/CoAP buffers. The -40C to +85C industrial grade covers outdoor enclosures with proper thermal design. The 12-bit 18 MSPS ADC monitors supply rails and ambient sensors. Reference DS60001565D for layout guidance on mixed-signal routing.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC32MZ1025DAS176-I/2J — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC32MZ1025DAK176-I/2J | PIC32MZ1025DAL176-I/2J | PIC32MZ1025DAS176-V/2J | PIC32MZ1025DAR176-V/2J | PIC32MZ1025DAA176-I/2J |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 176-LQFP (20x20 mm) | 176-LQFP (20x20 mm) | 176-LQFP (20x20 mm) | 176-LQFP (20x20 mm) | 176-LQFP (20x20 mm) | 176-LQFP (20x20 mm) |
| Core | MIPS32 microAptiv @ 200 MHz | MIPS32 microAptiv @ 200 MHz | MIPS32 microAptiv @ 200 MHz | MIPS32 microAptiv @ 200 MHz | MIPS32 microAptiv @ 200 MHz | MIPS32 microAptiv @ 200 MHz |
| Program Flash | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| SRAM | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB |
| Graphics Controller | Yes (integrated GPU + LCD controller) | Yes | Yes | Yes | Yes | Yes |
| Temperature Grade | -40C to +85C (Industrial -I) | -40C to +85C (Industrial -I) | -40C to +85C (Industrial -I) | -40C to +105C (Automotive -V) | -40C to +105C (Automotive -V) | -40C to +85C (Industrial -I) |
| DDR2 External Memory | Yes, up to 128 MB externally addressable | Yes | Yes | Yes | Yes | Yes |
| Sub-family Suffix | DAS (graphics, no Ethernet) | DAK | DAL | DAS (auto grade) | DAR | DAA (legacy) |
主な差別化要因
- Same 176-LQFP pinout across DAK/DAL/DAS/DAR sub-family variants （vs PIC32MZ1025DAK176-I/2J)
- Industrial vs Automotive temperature grade option （vs PIC32MZ1025DAS176-V/2J)
- Integrated Graphics Controller and GPU offload （vs PIC32MZ1025DAA176-I/2J)
- DDR2 controller supporting up to 128 MB external （vs PIC32MX795F512L-80I/PF)
設計ノート
Estimated: The 176-LQFP package exposes the full DDR2 external memory bus, and routing at this speed is the most common cause of boot failures on PIC32MZ DAS boards. Reference design notes in DS60001565D require length-matched traces (typically within +/- 25 mil) between the MCU and DDR2, with controlled impedance (50 ohm single-ended, 100 ohm differential for clock). The exposed thermal pad must be soldered to a continuous ground plane with at least 9 thermal vias (0.3 mm drill, 0.635 mm pitch) to keep junction temperature in range during DDR2 switching.
The PIC32MZ1025DAS176-I/2J operates from a 1.8V core supply with separate rails for the DDR2 PHY (typically 1.8V) and ADC AVdd (clean 3.3V). Decoupling follows the family datasheet: 100 nF X7R ceramic on every Vdd/Vss pair within 2 mm of the pin, plus 4.7 uF bulk on each rail. The HS USB PHY requires its own 1.0 uF decoupling on the USB Vdd pin to comply with USB 2.0 high-speed signal integrity. ADC AVdd must be filtered with a ferrite bead from the digital 3.3V rail to avoid coupling switching noise into the 12-bit ADC measurements.
Estimated: at the maximum core frequency of 200 MHz with DDR2 active and USB HS transmitting, the PIC32MZ1025DAS176-I/2J consumes approximately 350-450 mA from the 1.8V core rail. The 176-LQFP with exposed pad and a JEDEC 4-layer board achieves roughly 28 C/W theta_JA, giving a 12-15 C rise over a 25 C ambient. With the -I industrial grade ceiling at +85 C, the design margin is sufficient only when the thermal pad is properly soldered to a ground plane with adequate vias. Failures in field applications are most often traced to inadequate thermal pad soldering rather than ambient temperature.
Common PIC32MZ DAS mistakes include: (1) forgetting to configure the DDR2 PHY impedance calibration resistors per family reference design; (2) using the wrong DDR2 timing parameter file from the MPLAB Harmony configurator - the family datasheet DS60001565D specifies the exact speed bin; (3) leaving the JTAG pins floating instead of pulling them to defined states per the family pinout table; (4) sharing the parallel LCD data pins with the DDR2 bus, which is permitted only if the LCD is not used simultaneously with external memory; (5) attempting to use the DAA suffix as a drop-in replacement without verifying the DDR2 controller revision - the DAA predates some DDR2 PHY fixes.
Estimated: The 176-LQFP at 0.5 mm pitch requires 0.20 mm trace width with 0.20 mm clearance for fanout, which is at the limit of standard 1 oz PCB processes. Use micro-via-in-pad (0.10 mm laser vias) on the inner pads of the package to escape the inner rows, or use a 4-layer stack-up with dedicated signal layers between two ground planes. The exposed pad must be split into a 3x3 via array under the package center; do not route any signal traces through this array. Reference the family reference design Gerber package for the exact via pattern.
コンプライアンス情報
RoHS and lead-free per Microchip product page. The -V/2J SKU is AEC-Q100 qualified for automotive; the -I/2J SKU in this listing is industrial grade and not AEC-Q100 qualified. Per Microchip ordering code scheme, /2J denotes the LQFP-176 package type within the family.
