AD7862AR-10 vs AD7863AR-3REEL 比較
詳細な並列比較: AD7862AR-10 メーカー: Analog Devices および AD7863AR-3REEL メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | AD7862AR-10 | AD7863AR-3REEL |
|---|---|---|
| ブランド | Analog Devices | Analog Devices |
| カテゴリ | ADC/DAC | ADC/DAC |
| ライフサイクル状態 | 有効 | Obsolete |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $12.35 | $10.40 |
| Part Number | AD7862AR-10 | — |
| Number of ADCs | 2 | — |
| 分解能 | 12 bits | 14 bit |
| Conversion Rate (Throughput) | 250 kSPS per channel | — |
| Conversion Time | 4 microseconds | 5.2 us per channel |
| Input Channels | 4 (2 channels x 2 inputs) | — |
| 入力電圧範囲 | ±10 V (AD7862-10) | — |
| Analog Input Type | Single-ended, true bipolar | — |
| 電源電圧 | +5 V single supply | 5 V single supply |
| Supply Current (typ) | 12 mA (60 mW) | — |
| Architecture | SAR (Successive Approximation) | SAR (Successive Approximation) |
| Internal Reference | +2.5 V | 2.5 V |
| Aperture Delay Matching | Tight (matched between two ADCs) | — |
| インターフェース | High-speed parallel | — |
| Integral Nonlinearity (INL) | ±1 LSB max (typical) / ±0.5 LSB (B-grade) | [DATA_NEEDED: INL max value] |
| Signal-to-Noise Ratio (SNR) | 70 dB typical | — |
| Common-Mode Rejection | 80 dB typical at 50 kHz | — |
| Power Dissipation | 60 mW typical | — |
| 動作温度範囲 | -40 °C to +85 °C | — |
| パッケージ | 28-pin SOIC (R-28) wide body | 28-SOIC (0.295 inch / 7.50 mm width, wide-body) |
| Channel Selection | A0 logic input | — |
| Track-and-Hold | Yes, two integrated T/H amplifiers | — |
| 実装タイプ | Surface Mount | Surface Mount |
| RoHS ステータス | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Number of Channels | — | 4 (2 ADC cores x 2 input ranges) |
| サンプリングレート | — | 175 kSPS per channel |
| Input Range (Variant -3) | — | +/-10 V or +/-2.5 V bipolar, software selectable |
| Data Interface | — | Parallel |
| 動作温度 | — | -40C to +85C |
| Packaging | — | Tape and Reel (TR) |
| Process Technology | — | LC2MOS (linear compatible CMOS) |
| Power Consumption | — | [DATA_NEEDED: typical mW value] |