AD7862AR-10 vs AD7863AR-3REEL 비교
다음의 상세 나란히 비교: AD7862AR-10 제조: Analog Devices 및 AD7863AR-3REEL 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | AD7862AR-10 | AD7863AR-3REEL |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | ADC/DAC | ADC/DAC |
| 수명 주기 상태 | 활성 | Obsolete |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $12.35 | $10.40 |
| Part Number | AD7862AR-10 | — |
| Number of ADCs | 2 | — |
| 분해능 | 12 bits | 14 bit |
| Conversion Rate (Throughput) | 250 kSPS per channel | — |
| Conversion Time | 4 microseconds | 5.2 us per channel |
| Input Channels | 4 (2 channels x 2 inputs) | — |
| 입력 전압 범위 | ±10 V (AD7862-10) | — |
| Analog Input Type | Single-ended, true bipolar | — |
| 공급 전압 | +5 V single supply | 5 V single supply |
| Supply Current (typ) | 12 mA (60 mW) | — |
| Architecture | SAR (Successive Approximation) | SAR (Successive Approximation) |
| Internal Reference | +2.5 V | 2.5 V |
| Aperture Delay Matching | Tight (matched between two ADCs) | — |
| 인터페이스 | High-speed parallel | — |
| Integral Nonlinearity (INL) | ±1 LSB max (typical) / ±0.5 LSB (B-grade) | [DATA_NEEDED: INL max value] |
| Signal-to-Noise Ratio (SNR) | 70 dB typical | — |
| Common-Mode Rejection | 80 dB typical at 50 kHz | — |
| Power Dissipation | 60 mW typical | — |
| 동작 온도 범위 | -40 °C to +85 °C | — |
| 패키지 | 28-pin SOIC (R-28) wide body | 28-SOIC (0.295 inch / 7.50 mm width, wide-body) |
| Channel Selection | A0 logic input | — |
| Track-and-Hold | Yes, two integrated T/H amplifiers | — |
| 실장 유형 | Surface Mount | Surface Mount |
| RoHS 상태 | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Number of Channels | — | 4 (2 ADC cores x 2 input ranges) |
| 샘플링 속도 | — | 175 kSPS per channel |
| Input Range (Variant -3) | — | +/-10 V or +/-2.5 V bipolar, software selectable |
| Data Interface | — | Parallel |
| 동작 온도 | — | -40C to +85C |
| Packaging | — | Tape and Reel (TR) |
| Process Technology | — | LC2MOS (linear compatible CMOS) |
| Power Consumption | — | [DATA_NEEDED: typical mW value] |