DS90C402M vs ADM485ARZ 比較
詳細な並列比較: DS90C402M メーカー: Texas Instruments および ADM485ARZ メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ 生産中仕様比較
| パラメータ | DS90C402M | ADM485ARZ |
|---|---|---|
| ブランド | Texas Instruments | Analog Devices |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $1.10 | $1.62 |
| Device Type | Dual LVDS receiver | — |
| Receiver Configuration | 2 receivers | — |
| Input Threshold Sensitivity | ±100 mV | — |
| Common-Mode Noise Protection | Supported | — |
| Data-Rate Optimization | High data rate | — |
| Power Optimization | Low power | — |
| Interface Pairing | DS90C401 companion device | — |
| トポロジー | Dual high-speed point-to-point interface | — |
| パッケージ | 8-lead SOIC | SOIC-8 (SO-8) / SO-8 |
| Package Family | SOIC surface-mount package family | — |
| ピン数 | 8 | — |
| 動作電源電圧 | [DATA_NEEDED: operating supply voltage] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | — |
| 電源電流 | [DATA_NEEDED: supply current] | — |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | -40 C to +85 C |
| Differential Input Termination | [DATA_NEEDED: input termination requirement] | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | Unaffected |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| MSL | [DATA_NEEDED: moisture sensitivity level] | — |
| 実装タイプ | Surface mount | Surface Mount |
| Type | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| 電源電圧 | — | 5 V (single supply) |
| データレート | — | 5 Mbps (max) |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Common-Mode Range | — | -7 V to +12 V |
| Driver Differential Output | — | [DATA_NEEDED: VOD min/max] |
| ESD Protection | — | [DATA_NEEDED: ESD HBM rating] |
| MSLレベル | — | 1 (Unlimited) |
| Compliance | — | ROHS3 Compliant |
| Enable Pins | — | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) |