EPC2T32U vs EPC2T32U-CAF48 比較

詳細な並列比較: EPC2T32U メーカー: Altera および EPC2T32U-CAF48 メーカー: Altera。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Altera
EPC2T32U-CAF48 EPC2T32U-CAF48 - Altera/Intel 2Mb Config Device, 8MHz, 48-QFN | XAIPART

EPC2T32U-CAF48 - Altera/Intel 2Mb Config Device, 8MHz, 48-QFN | XAIPART

EPC2T32U-CAF48 ⚠ ラストタイムバイ

仕様比較

パラメータ EPC2T32U EPC2T32U-CAF48
ブランド Altera Altera
カテゴリ Memory ICs Memory ICs
ライフサイクル状態 Obsolete ラストバイ
在庫状況 In Stock In Stock
単価(USD) $16.10 $17.60
機能 Configuration PROM for SRAM-based LUT FPGAs —
Memory Density 1.6 Mbit 2 Mb (2097152 bits)
電源電圧 3.3 V or 5.0 V (user-selectable) —
Programmability In-system programmable via JTAG (IEEE 1149.1) —
Configuration Modes Supported Passive serial, passive parallel synchronous, passive parallel asynchronous, JTAG —
パッケージ 32-pin TQFP 48-pin QFN (CAF suffix)
動作温度 Commercial / Industrial grade [DATA_NEEDED: exact range] -40 C to +85 C (industrial grade, "U")
Cascading Support Yes, via dedicated cascade port for density expansion —
Compression Support Altera bitstream decompression (up to 50% storage reduction) —
Compatible FPGA Families APEX II, APEX 20K, Mercury, ACEX 1K —
Lead-Free Finish Yes (per part suffix 'U') Yes (CAF suffix indicates lead-free)
実装タイプ Surface Mount Surface Mount
MSLレベル [DATA_NEEDED: MSL rating] [DATA_NEEDED: MSL level]
RoHS ステータス Compliant Compliant
Hand-shake Pins nSTATUS, nCONFIG, CONF_DONE —
メモリタイプ — Non-volatile flash configuration memory
Configuration Interface — Altera FPP (8-bit) / PS (4-wire) / AS (serial)
Maximum Configuration Clock (DCLK) — 8 MHz
Supply Voltage (VCC) — 3.3 V (typical)
I/O Tolerance — 5 V tolerant
Program/Erase Endurance — 10,000 cycles per sector minimum
Data Retention — 20 years minimum
Programming Interface — IEEE 1149.1 (JTAG) / IEEE 1532
Supported FPGA Families — Cyclone, Cyclone II, Stratix, APEX 20K, ACEX 1K, Mercury, Excalibur

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼