MAX3483CPA+ vs MAX3483ECPA+ 比較
詳細な並列比較: MAX3483CPA+ メーカー: Analog Devices および MAX3483ECPA+ メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | MAX3483CPA+ | MAX3483ECPA+ |
|---|---|---|
| ブランド | Analog Devices | Analog Devices |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | RS-485/RS-422 transceiver | Half-duplex RS-485/RS-422 transceiver |
| 電源電圧 | 3.0 V to 3.6 V | 3.3 V |
| データレート | 250 kbps | — |
| Driver Count | 1 | 1 driver |
| Receiver Count | 1 | 1 receiver |
| Duplex Mode | Half-duplex | Half-duplex |
| Receiver Hysteresis | 50 mV | — |
| Protocols | RS-422 and RS-485 | — |
| Slew-Rate-Limited Driver | Yes | — |
| 動作温度 | 0C to 70C | — |
| 実装タイプ | Through hole | — |
| パッケージ | 8-pin PDIP | — |
| Logic Direction | Single transmitter and single receiver | — |
| Driver Architecture | True differential RS-485/RS-422 | — |
| EMI Behavior | Slew-rate limiting minimizes EMI | — |
| Cable Reflection Control | Slew-rate limiting helps reduce reflections | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Operating Supply Range | — | 3 V to 3.6 V |
| Maximum Data Rate | — | 12Mbps |
| ESD Protection | — | ±15kV |
| Supported Standards | — | RS-485 and RS-422 |
| Driver Edge Rate | — | Slew-rate limited |
| Package Type | — | 8-pin PDIP through-hole package |
| Total Pin Count | — | 8 pins |
| Production Status | — | Production |
| Datasheet Revision | — | Revision 2 |
| Temperature Range | — | [DATA_NEEDED: operating temperature range] |
| 電源電流 | — | [DATA_NEEDED: typical and maximum supply current] |
| Receiver Differential Threshold | — | [DATA_NEEDED: receiver differential threshold] |
| Driver Output Voltage | — | [DATA_NEEDED: driver output voltage] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |