MAX3483CPA+ vs MAX3483ECPA+ موازنہ
تفصیلی ساتھ ساتھ موازنہ از MAX3483CPA+ بذریعہ Analog Devices اور MAX3483ECPA+ بذریعہ Analog Devices. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
خصوصیات کا موازنہ
| پیرامیٹر | MAX3483CPA+ | MAX3483ECPA+ |
|---|---|---|
| برانڈ | Analog Devices | Analog Devices |
| زمرہ | Interface ICs | Interface ICs |
| لائف سائیکل کی حالت | فعال | فعال |
| Product Type | RS-485/RS-422 transceiver | Half-duplex RS-485/RS-422 transceiver |
| سپلائی وولٹیج | 3.0 V to 3.6 V | 3.3 V |
| ڈیٹا ریٹ | 250 kbps | — |
| Driver Count | 1 | 1 driver |
| Receiver Count | 1 | 1 receiver |
| Duplex Mode | Half-duplex | Half-duplex |
| Receiver Hysteresis | 50 mV | — |
| Protocols | RS-422 and RS-485 | — |
| Slew-Rate-Limited Driver | Yes | — |
| آپریٹنگ درجہ حرارت | 0C to 70C | — |
| ماؤنٹنگ ٹائپ | Through hole | — |
| پیکیج | 8-pin PDIP | — |
| Logic Direction | Single transmitter and single receiver | — |
| Driver Architecture | True differential RS-485/RS-422 | — |
| EMI Behavior | Slew-rate limiting minimizes EMI | — |
| Cable Reflection Control | Slew-rate limiting helps reduce reflections | — |
| RoHS اسٹیٹس | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Operating Supply Range | — | 3 V to 3.6 V |
| Maximum Data Rate | — | 12Mbps |
| ESD Protection | — | ±15kV |
| Supported Standards | — | RS-485 and RS-422 |
| Driver Edge Rate | — | Slew-rate limited |
| Package Type | — | 8-pin PDIP through-hole package |
| Total Pin Count | — | 8 pins |
| Production Status | — | Production |
| Datasheet Revision | — | Revision 2 |
| Temperature Range | — | [DATA_NEEDED: operating temperature range] |
| سپلائی کرنٹ | — | [DATA_NEEDED: typical and maximum supply current] |
| Receiver Differential Threshold | — | [DATA_NEEDED: receiver differential threshold] |
| Driver Output Voltage | — | [DATA_NEEDED: driver output voltage] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |