MAX3483CPA+ vs MAX3483ECPA+ 비교
다음의 상세 나란히 비교: MAX3483CPA+ 제조: Analog Devices 및 MAX3483ECPA+ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | MAX3483CPA+ | MAX3483ECPA+ |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | RS-485/RS-422 transceiver | Half-duplex RS-485/RS-422 transceiver |
| 공급 전압 | 3.0 V to 3.6 V | 3.3 V |
| 데이터 속도 | 250 kbps | — |
| Driver Count | 1 | 1 driver |
| Receiver Count | 1 | 1 receiver |
| Duplex Mode | Half-duplex | Half-duplex |
| Receiver Hysteresis | 50 mV | — |
| Protocols | RS-422 and RS-485 | — |
| Slew-Rate-Limited Driver | Yes | — |
| 동작 온도 | 0C to 70C | — |
| 실장 유형 | Through hole | — |
| 패키지 | 8-pin PDIP | — |
| Logic Direction | Single transmitter and single receiver | — |
| Driver Architecture | True differential RS-485/RS-422 | — |
| EMI Behavior | Slew-rate limiting minimizes EMI | — |
| Cable Reflection Control | Slew-rate limiting helps reduce reflections | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Operating Supply Range | — | 3 V to 3.6 V |
| Maximum Data Rate | — | 12Mbps |
| ESD Protection | — | ±15kV |
| Supported Standards | — | RS-485 and RS-422 |
| Driver Edge Rate | — | Slew-rate limited |
| Package Type | — | 8-pin PDIP through-hole package |
| Total Pin Count | — | 8 pins |
| Production Status | — | Production |
| Datasheet Revision | — | Revision 2 |
| Temperature Range | — | [DATA_NEEDED: operating temperature range] |
| 공급 전류 | — | [DATA_NEEDED: typical and maximum supply current] |
| Receiver Differential Threshold | — | [DATA_NEEDED: receiver differential threshold] |
| Driver Output Voltage | — | [DATA_NEEDED: driver output voltage] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |