MAX485EESA+ vs MAX485CSA+ 比較

詳細な並列比較: MAX485EESA+ メーカー: Analog Devices および MAX485CSA+ メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Analog Devices
MAX485CSA+ MAX485CSA+ - 2.5Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX485CSA+ - 2.5Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX485CSA+ ✓ 生産中

仕様比較

パラメータ MAX485EESA+ MAX485CSA+
ブランド Analog Devices Analog Devices
カテゴリ Interface ICs Interface ICs
ライフサイクル状態 有効 有効
Product Type RS-485/RS-422 Transceiver —
Protocol RS-485, RS-422 —
Duplex Half-Duplex —
Number of Drivers/Receivers 1/1 —
Supply Voltage (VCC) 4.75 V to 5.25 V —
データレート Up to 2.5 Mbps —
ESD Protection (Bus Pins, HBM) ±15 kV —
Driver Slew Rate Limited (low-EMI) Unlimited for the MAX485 family
Quiescent Supply Current 1 mA (typical) —
Number of Nodes on Bus 32 (1/2 unit load) —
Receiver Input Impedance 96 kΩ (1/2 unit load) —
動作温度範囲 -40 °C to +85 °C [DATA_NEEDED: MAX485CSA operating temperature range]
パッケージ / ケース 8-pin SOIC (SO-8, 3.9 mm body) —
実装タイプ Surface Mount Surface mount
Lead-Free / RoHS Status Lead-Free, RoHS compliant —
MSLレベル 1 (Unlimited) —
Transceiver Configuration — 1 driver and 1 receiver
Communication Standards — RS-485 and RS-422
Duplex Mode — Half-duplex
Maximum Data Rate — 2.5Mbps
Device Type — Low-power differential transceiver
パッケージ — 8-pin SOIC
ピン数 — 8 pins
電源電圧 — [DATA_NEEDED: supply voltage range]
電源電流 — [DATA_NEEDED: unloaded and loaded supply current]
Common-Mode Voltage Range — [DATA_NEEDED: receiver common-mode voltage range]
Differential Input Sensitivity — [DATA_NEEDED: receiver differential input sensitivity]
Driver Output Current — [DATA_NEEDED: driver output current]
Short-Circuit Protection — [DATA_NEEDED: driver short-circuit protection duration]
RoHS Compliance — [DATA_NEEDED: RoHS compliance status]
REACH Compliance — [DATA_NEEDED: REACH compliance status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]
Lead-Free Status — [DATA_NEEDED: lead-free status]

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼