MAX485EESA+ vs MAX485CSA+ 比較

詳細並排比較 MAX485EESA+ 由 Analog Devices 與 MAX485CSA+ 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Analog Devices
MAX485CSA+ MAX485CSA+ - 2.5Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX485CSA+ - 2.5Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX485CSA+ ✓ 啟用中

規格比較

參數 MAX485EESA+ MAX485CSA+
品牌 Analog Devices Analog Devices
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
Product Type RS-485/RS-422 Transceiver —
Protocol RS-485, RS-422 —
Duplex Half-Duplex —
Number of Drivers/Receivers 1/1 —
Supply Voltage (VCC) 4.75 V to 5.25 V —
資料速率 Up to 2.5 Mbps —
ESD Protection (Bus Pins, HBM) ±15 kV —
Driver Slew Rate Limited (low-EMI) Unlimited for the MAX485 family
Quiescent Supply Current 1 mA (typical) —
Number of Nodes on Bus 32 (1/2 unit load) —
Receiver Input Impedance 96 kΩ (1/2 unit load) —
工作溫度範圍 -40 °C to +85 °C [DATA_NEEDED: MAX485CSA operating temperature range]
封裝 / 外殼 8-pin SOIC (SO-8, 3.9 mm body) —
安裝類型 Surface Mount Surface mount
Lead-Free / RoHS Status Lead-Free, RoHS compliant —
MSL 等級 1 (Unlimited) —
Transceiver Configuration — 1 driver and 1 receiver
Communication Standards — RS-485 and RS-422
Duplex Mode — Half-duplex
Maximum Data Rate — 2.5Mbps
Device Type — Low-power differential transceiver
封裝 — 8-pin SOIC
腳位數 — 8 pins
供應電壓 — [DATA_NEEDED: supply voltage range]
供應電流 — [DATA_NEEDED: unloaded and loaded supply current]
Common-Mode Voltage Range — [DATA_NEEDED: receiver common-mode voltage range]
Differential Input Sensitivity — [DATA_NEEDED: receiver differential input sensitivity]
Driver Output Current — [DATA_NEEDED: driver output current]
Short-Circuit Protection — [DATA_NEEDED: driver short-circuit protection duration]
RoHS Compliance — [DATA_NEEDED: RoHS compliance status]
REACH Compliance — [DATA_NEEDED: REACH compliance status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]
Lead-Free Status — [DATA_NEEDED: lead-free status]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價