MAX485EESA+ vs MAX485CSA+ Comparação
Comparação detalhada lado a lado de MAX485EESA+ por Analog Devices e MAX485CSA+ por Analog Devices. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Analog Devices
MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices
MAX485EESA+ ✓ AtivoComparação de especificações
| Parâmetro | MAX485EESA+ | MAX485CSA+ |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Product Type | RS-485/RS-422 Transceiver | — |
| Protocol | RS-485, RS-422 | — |
| Duplex | Half-Duplex | — |
| Number of Drivers/Receivers | 1/1 | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | — |
| Taxa de dados | Up to 2.5 Mbps | — |
| ESD Protection (Bus Pins, HBM) | ±15 kV | — |
| Driver Slew Rate | Limited (low-EMI) | Unlimited for the MAX485 family |
| Quiescent Supply Current | 1 mA (typical) | — |
| Number of Nodes on Bus | 32 (1/2 unit load) | — |
| Receiver Input Impedance | 96 kΩ (1/2 unit load) | — |
| Faixa de temperatura de operação | -40 °C to +85 °C | [DATA_NEEDED: MAX485CSA operating temperature range] |
| Encapsulamento / Caixa | 8-pin SOIC (SO-8, 3.9 mm body) | — |
| Tipo de montagem | Surface Mount | Surface mount |
| Lead-Free / RoHS Status | Lead-Free, RoHS compliant | — |
| Nível MSL | 1 (Unlimited) | — |
| Transceiver Configuration | — | 1 driver and 1 receiver |
| Communication Standards | — | RS-485 and RS-422 |
| Duplex Mode | — | Half-duplex |
| Maximum Data Rate | — | 2.5Mbps |
| Device Type | — | Low-power differential transceiver |
| Encapsulamento | — | 8-pin SOIC |
| Contagem de pinos | — | 8 pins |
| Tensão de alimentação | — | [DATA_NEEDED: supply voltage range] |
| Corrente de alimentação | — | [DATA_NEEDED: unloaded and loaded supply current] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: receiver common-mode voltage range] |
| Differential Input Sensitivity | — | [DATA_NEEDED: receiver differential input sensitivity] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Short-Circuit Protection | — | [DATA_NEEDED: driver short-circuit protection duration] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |