MC9S08SH4CTJ vs MC9S08SH32CTJ 比較
詳細な並列比較: MC9S08SH4CTJ メーカー: NXP Semiconductors および MC9S08SH32CTJ メーカー: NXP Semiconductors。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | MC9S08SH4CTJ | MC9S08SH32CTJ |
|---|---|---|
| ブランド | NXP Semiconductors | NXP Semiconductors |
| カテゴリ | Microcontrollers | Microcontrollers |
| ライフサイクル状態 | NRND | 製造終了 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $1.85 | $1.52 |
| Core Architecture | HCS08 (enhanced 8-bit) | — |
| CPU Bit Width | 8-bit | — |
| Maximum Bus Frequency | 40 MHz | — |
| Program Memory (Flash) | 4 KB (4K x 8) | — |
| RAM | 256 B | — |
| Operating Voltage | 2.7 V to 5.5 V | — |
| ADC | 12-channel, 10-bit, 2.5 us conversion, auto-compare, internal temperature sensor | — |
| Timers | MTIM, RTI, TPM (PWM) | MTIM (modulo timer) |
| Communication Interfaces | SCI/UART, SPI, I2C | — |
| Analog Comparator | Yes (integrated) | — |
| パッケージ | 20-pin TSSOP | 20-TSSOP |
| 実装タイプ | Surface Mount | Surface Mount |
| 動作温度 | -40 C to +85 C (industrial, TJ suffix implied) | — |
| Low-Power Modes | STOP, WAIT with fast wake-up | — |
| Debug Interface | Single-wire BDM (background debug mode) | Single-wire background debug (BKGD) |
| Instruction Set | HC08 with BGND extension | — |
| Interrupt Sources | Up to 32 | — |
| RoHS ステータス | Compliant | — |
| Core Processor | — | HCS08 (S08) |
| Core Size | — | 8-Bit |
| 最大クロック周波数 | — | 40 MHz |
| Flash Memory | — | 32 KB (32K x 8) |
| RAM Size | — | 1 KB |
| 電源電圧 | — | 3.3 V / 5 V |
| Number of I/O | — | up to 16 GPIO |
| ADC Resolution | — | 10-bit |
| ADC Channels | — | 12-channel |
| Interrupt/Reset Sources | — | up to 32 |
| On-Chip Debug Module | — | ICE with 2 comparators, 9 trigger modes, 8-deep FIFO |
| Qualification | — | AEC-Q100 |
| Packaging | — | Tube |
| ライフサイクル状態 | — | End of Life (per NXP product page) |