MRF8S9220HSR3 vs MRF8S9170NR3 比較
詳細な並列比較: MRF8S9220HSR3 メーカー: NXP Semiconductors および MRF8S9170NR3 メーカー: NXP Semiconductors。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | MRF8S9220HSR3 | MRF8S9170NR3 |
|---|---|---|
| ブランド | NXP Semiconductors | NXP Semiconductors |
| カテゴリ | MOSFETs | MOSFETs |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $96.80 | $38.50 |
| Technology | LDMOS (Laterally Diffused MOSFET), N-Channel Enhancement-Mode | RF Power LDMOS |
| Frequency Range | 920 MHz to 960 MHz | 920 MHz to 960 MHz |
| Output Power (Avg, W-CDMA) | 65 W | — |
| Operating Drain Voltage (VDD) | 28 V (typical) | — |
| Drain-Source Voltage Rating (VDS max) | 70 V | — |
| Power Gain (typ) | 19.4 dB | — |
| Test Drain Current | 1.6 A | — |
| Drain Efficiency (typ) | [DATA_NEEDED: drain efficiency %] | — |
| パッケージ / ケース | NI-780S (Case 465-06, Style 1), ceramic | — |
| Package Dimensions (L x W x H) | 20.7 mm x 9.91 mm x 4.32 mm | — |
| Configuration | Single-ended, 1-carrier W-CDMA | — |
| 動作接合温度 | -65 C to +225 C | — |
| 実装タイプ | Surface Mount / Flange Mount | Surface Mount / Flange Mount (bolt-down thermal pad) |
| Lead-Free / RoHS | Lead Free (per DigChip listing) | Lead Free (per digchip listing) |
| Modulation Support | W-CDMA, CDMA, LTE (Class AB / Class C) | — |
| Manufacturer | — | NXP Semiconductors |
| トランジスタタイプ | — | LDMOS, N-Channel Enhancement-Mode Lateral MOSFET |
| Output Power (Average, W-CDMA) | — | 50 W |
| Power Gain (Typical) | — | 19.3 dB at 920 MHz, 28 V, 1 A quiescent bias |
| Drain-Source Voltage Rating (Vdss) | — | 70 V |
| Operating Drain Voltage (Test Condition) | — | 28 V |
| Quiescent Bias Current (Idq, Test Condition) | — | 1 A |
| Drain Current (Operating) | — | [DATA_NEEDED: typical operating Id at 50 W Pout] |
| パッケージ | — | OM-780-2 (ceramic flange) |
| 動作温度 | — | [DATA_NEEDED: Tj max and operating range from datasheet] |
| Class of Operation | — | Class AB, Class C (W-CDMA) |
| ESD Protection | — | [DATA_NEEDED: ESD class rating from datasheet] |
| Impedance Characterization | — | Series-equivalent large-signal impedance parameters provided |
| Test Conditions Note | — | 100% PAR tested for guaranteed output power capability |