5CSEBA5U19I7LN - Cyclone V SE SoC FPGA, 85K LE, 925MHz, U19 | Intel
部品番号: 5CSEBA5U19I7LN ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $215 | $215.00 |
| 10 | $198.5 | $1,985.00 |
| 100 | $175 | $17,500.00 |
| 500 | $158.2 | $79,100.00 |
| 1,000 | $142.8 | $142,800.00 |
5CSEBA5U19I7LN 概要
A SoC FPGA is a heterogeneous computing device that combines a general-purpose applications processor with a programmable logic fabric, tightly coupled through high-bandwidth AXI/FPGA-to-HPS bridges. This architecture occupies a position in the hierarchy of embedded computing between standalone microcontrollers and high-end CPUs/MPSoCs, enabling deterministic hardware acceleration (in the FPGA fabric) alongside operating-system-driven application processing (in the HPS). Cyclone V SE SoCs specifically target cost- and power-sensitive designs that require hardware-accelerated DSP, video, or protocol bridging without the bill of materials of a separate processor plus FPGA design.
Key features of the 5CSEBA5U19I7LN include up to 925 MHz HPS clock, ARM Cortex-A9 dual-core with CoreSight, integrated DDR3 memory controller with ECC support, 3.125 Gbps transceiver options, industrial temperature grade (-40C to +100C junction), and hard PCIe Gen2 and Gigabit Ethernet MAC blocks. The device also integrates a multiport SDRAM controller, NAND flash controller, SD/MMC/SDIO/eMMC interfaces, two USB 2.0 On-The-Go controllers, and a dedicated configuration controller. The 484-UBGA package exposes the full HPS peripheral set plus 364 user I/O pins distributed across eight I/O banks supporting LVDS, LVCMOS, SSTL, and HSTL I/O standards.
Typical applications include industrial machine vision and video surveillance systems, factory automation controllers with HMI, motor control drives with deterministic FPGA-based PWM, smart-grid energy management, broadcast video processing, and automotive driver-assist prototyping. The combination of ARM Cortex-A9 Linux capability and FPGA fabric acceleration makes it well-suited for edge analytics, protocol bridging (EtherCAT, PROFINET, EtherNet/IP), and any design where deterministic low-latency I/O must coexist with high-level OS software.
When designing with the 5CSEBA5U19I7LN, allocate the 925 MHz HPS clock budget carefully, pair the integrated DDR3 controller with discrete DDR3L memory, and provide adequate decoupling across all eight I/O banks. The SoC requires boot configuration through the HPS boot ROM (typically from QSPI flash or SD card) plus an FPGA fabric configuration bitstream - both must be present at power-on for full HPS-plus-FPGA functionality.
This page consolidates Intel datasheet parameters, distributor pricing, same-package drop-in alternatives from the Cyclone V SoC family, and practical HPS/FPGA design notes not found on the manufacturer ordering page.
ドロップイン代替品: 5CSEBA5U19I7LN — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: 5CSEBA5U19I7LN （同一形状・フットプリント） — 相違点: Package, Logic Elements, Embedded Memory, Speed Grade, DSP Blocks.
クイック比較ツール — 並列比較する代替部品を選択:
5CSEBA5U19C8SN
✅ ドロップイン✓ 在庫あり
$162 / 個
データシートを見る →5CSEBA5U19C8N
✅ ドロップイン✓ 在庫あり
$195 / 個
データシートを見る →5CSEBA5U19C7SN
✅ ドロップイン✓ 在庫あり
$305 / 個
データシートを見る →5CSEBA5U19C7N
✅ ドロップイン✓ 在庫あり
$99.2 / 個
データシートを見る →5CSEBA5U19A7N
✅ ドロップイン✓ 在庫あり
$152.4 / 個
データシートを見る →5CSEBA5U19C6N
✅ ドロップイン✓ 在庫あり
$118.2 / 個
データシートを見る →5CSEBA4U19I7LN
✅ ドロップイン✓ 在庫あり
$168 / 個
データシートを見る →5CSEBA4U19I7N
✅ ドロップイン✓ 在庫あり
$72 / 個
データシートを見る →5CSEBA5U19I7LN 最大定格＆電気的特性
| Family | Cyclone V SE SoC FPGA |
| Logic Elements | 85 K |
| Hard Processor System | Dual ARM Cortex-A9 MPCore with CoreSight |
| HPS Maximum Frequency | 925 MHz |
| パッケージ | 484-UBGA (U19), 19x19 mm |
| 動作温度範囲 | -40C to +100C (Industrial) |
| Speed Grade | I7 |
| Embedded Memory | 4.45 Mbits |
| DSP Blocks | 156 |
| User I/O Pins | 364 |
| I/O Banks | 8 |
| Transceivers | Up to 3.125 Gbps |
| Hard Memory Controller | DDR3 with ECC support |
| Hard PCIe | PCIe Gen2 x4 |
| Hard Ethernet MAC | Gigabit Ethernet |
| 実装タイプ | Surface Mount (BGA) |
| RoHS ステータス | Compliant |
5CSEBA5U19I7LN 484-ubga (u19), 19x19 mm ピン配置ガイド
5CSEBA5U19I7LN (484-ubga (u19), 19x19 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: 5CSEBA5U19I7LN.
詳細は データシート をご参照ください。
主な用途
5CSEBA5U19I7LN の用途: 7 件s: Industrial Machine Vision Systems, Motor Control and Industrial Drives, Video Surveillance and Broadcast Equipment, Factory Automation Controllers with HMI, Smart Energy and Grid Edge Devices, Automotive Driver-Assist Prototyping, Medical Imaging and Diagnostic Equipment.
Industrial Machine Vision Systems
The 5CSEBA5U19I7LN is ideal for industrial machine vision systems that need real-time image preprocessing on the FPGA fabric and Linux-based classification or defect-detection algorithms on the HPS. The 85K logic elements and 156 DSP blocks accelerate common preprocessing tasks - Bayer demosaicing, Sobel filtering, and morphological operations - while the 925 MHz Dual ARM Cortex-A9 HPS runs OpenCV and inference frameworks like TensorFlow Lite. The integrated DDR3 controller with ECC supports the high memory bandwidth required for HD video pipelines, and the industrial temperature grade (-40C to +100C) ensures reliability on factory floors.
おすすめ
Motor Control and Industrial Drives
The 5CSEBA5U19I7LN suits high-performance motor control drives where deterministic PWM generation and field-oriented control algorithms must coexist with industrial Ethernet protocol stacks. The FPGA fabric implements encoder decoding, PWM generation, and current-loop control with sub-microsecond latency, while the HPS runs Linux with EtherCAT, PROFINET, or EtherNet/IP master stacks for real-time communication. The 364 user I/O across 8 banks support multiple encoder interfaces (EnDat, BiSS, Tamagawa), gate-driver outputs, and analog feedback channels simultaneously.
おすすめ
Video Surveillance and Broadcast Equipment
The 5CSEBA5U19I7LN powers multi-channel video surveillance recorders and broadcast video processing equipment that require H.264/H.265 encoding/decoding alongside analytics overlays. The FPGA fabric accelerates video pipeline functions - color space conversion, scaling, and overlay composition - while the HPS manages network streaming, storage, and ONVIF/RTSP protocol stacks. The 3.125 Gbps transceivers handle SDI input/output for broadcast-grade equipment, and the integrated Gigabit Ethernet MAC supports multiple IP camera streams simultaneously.
おすすめ
Factory Automation Controllers with HMI
The 5CSEBA5U19I7LN integrates a Linux-driven HMI panel and PLC-style logic in a single SoC, eliminating the need for separate processor plus FPGA designs. The Dual ARM Cortex-A9 HPS runs Qt or Web-based HMI applications while the FPGA fabric executes deterministic ladder-logic or IEC 61131-3 soft-PLC code. The industrial temperature grade and integrated peripherals (USB, Ethernet, SD/MMC) make it suitable for control cabinets, and the 85K logic elements provide headroom for custom industrial protocols and safety functions.
おすすめ
Smart Energy and Grid Edge Devices
The 5CSEBA5U19I7LN enables smart-grid edge devices such as phasor measurement units, power-quality analyzers, and substation controllers requiring high-speed ADC sampling plus secure communication. The FPGA fabric captures and processes high-rate ADC data streams from current/voltage sensors, while the HPS runs secure Linux with TLS/DNP3/IEC 61850 protocol stacks. The hard cryptographic accelerators in the HPS support grid cybersecurity requirements, and the industrial temperature grade withstands outdoor enclosure conditions.
おすすめ
Automotive Driver-Assist Prototyping
The 5CSEBA5U19I7LN is used for prototyping advanced driver-assistance systems (ADAS) where sensor fusion and real-time processing must coexist with vehicle networking. The FPGA fabric pre-processes camera, radar, or lidar sensor data with deterministic latency, while the Dual ARM Cortex-A9 HPS runs object-detection and sensor-fusion algorithms. The 3.125 Gbps transceivers interface with automotive Ethernet (100BASE-T1, 1000BASE-T1) and CAN-FD buses, and the automotive speed-grade variant 5CSEBA5U19A7N supports AEC-Q100 environments when production qualification is required.
おすすめ
Medical Imaging and Diagnostic Equipment
The 5CSEBA5U19I7LN supports portable and mid-range medical imaging systems such as ultrasound and endoscopy controllers where high-speed signal processing must be paired with user-interface software. The FPGA fabric implements beamforming, filtering, and image reconstruction algorithms, while the HPS drives the touchscreen UI, DICOM networking, and patient database integration. The medical-relevant features include the DDR3 controller with ECC for data integrity and the integrated Gigabit Ethernet for DICOM transmission over hospital networks.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: 5CSEBA5U19I7LN — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | 5CSEBA5U19C8SN | 5CSEBA5U19C7SN | 5CSEBA5U19A7N | 5CSEBA4U19I7LN |
|---|---|---|---|---|---|
| Package | 484-UBGA (U19) | 484-UBGA (U19) - same | 484-UBGA (U19) - same | 484-UBGA (U19) - same | 484-UBGA (U19) - same |
| Brand | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 85 K | 85 K | 85 K | 85 K | 40 K (-53%) |
| Speed Grade | I7 | C8 (commercial) | C7 (commercial, -10%) | A7 (automotive) | I7 (industrial) |
| Operating Temperature | -40C to +100C (Industrial) | 0C to +85C (Commercial) | 0C to +85C (Commercial) | -40C to +125C (Automotive) | -40C to +100C (Industrial) |
| HPS Maximum Frequency | 925 MHz | 925 MHz | 925 MHz | 925 MHz | 925 MHz |
| DSP Blocks | 156 | 156 | 156 | 156 | 110 (-29%) |
| Embedded Memory | 4.45 Mbits | 4.45 Mbits | 4.45 Mbits | 4.45 Mbits | 2.7 Mbits (-39%) |
主な差別化要因
- Industrial temperature grade at I7 speed grade （vs 5CSEBA5U19C8SN)
- Larger FPGA fabric than 5CSEBA4 family （vs 5CSEBA4U19I7LN)
- Same-package U19 footprint with identical HPS （vs 5CSEBA5U19A7N)
設計ノート
The 5CSEBA5U19I7LN requires multiple voltage rails: a 0.85V core supply for the HPS and FPGA fabric, 1.1V/1.35V for DDR3 interface, 1.8V/2.5V/3.3V for I/O banks, and a 1.5V transceiver supply if the 3.125 Gbps channels are used. Decoupling per Intel reference designs should include 0402 ceramic capacitors placed as close as possible to each power pin, with bulk capacitors distributed across the BGA footprint. Estimate: total core current at full HPS and FPGA utilization is approximately 3-5A, requiring at least a 10A-capable buck regulator with remote sense.
The 484-UBGA package has a 19x19 mm body with 0.8 mm ball pitch. PCB design requires microvia (HDI) stack-up with at least 4-6 layers, blind/buried vias for breakout routing, and via-in-pad for the center ball rows. Use the Intel Cyclone V development kit PCB stack-up as a starting reference. Estimated minimum trace width for one ball escape is 0.1 mm (4 mil) with 0.1 mm spacing. Controlled impedance (50 ohm single-ended, 90 ohm differential) is required for all transceiver and DDR3 lanes.
Route DDR3 signals with matched-length matching per Intel pin-out guidelines: DQ/DQS within +/-25 mil, address/command within +/-100 mil, and clock within +/-50 mil. The HPS and FPGA-fabric DDR3 controllers each have their own dedicated I/O banks - do not share them between controllers. Estimate: total DDR3 trace length budget for a 16-bit interface is approximately 2 inches (50 mm) max to maintain signal integrity at 533 MHz operation.
Common pitfalls when designing with the 5CSEBA5U19I7LN: (1) Forget to provide both the HPS boot image (typically in QSPI flash or SD card) and the FPGA bitstream - the device will not boot fully without both. (2) Mix HPS and FPGA-fabric voltage rails - the HPS core requires 0.85V while the FPGA fabric may have different voltage requirements depending on utilization. (3) Neglect MSL handling - BGA packages require dry-pack storage and pre-bake if floor-life is exceeded before reflow. (4) Skip the configuration controller pin connection to MSEL - the boot mode will not be selectable without correct MSEL[4:0] strapping.
コンプライアンス情報
RoHS and REACH compliant per Intel/Alt-era Cyclone V product family documentation. The standard 5CSEBA5U19I7LN is not AEC-Q100 qualified; choose 5CSEBA5U19A7N for AEC-Q100 automotive applications.
