5M570ZT144C5N - MAX V 440 Logic Element CPLD 118.3MHz TQFP-144
部品番号: 5M570ZT144C5N ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $10.99 | $10.99 |
| 10 | $10.45 | $104.50 |
| 100 | $9.2 | $920.00 |
| 500 | $8.1 | $4,050.00 |
| 1,000 | $7.25 | $7,250.00 |
5M570ZT144C5N 概要
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that bridges the gap between simple PAL/GAL devices and larger FPGAs, providing fast deterministic pin-to-pin propagation delays (typically 4-9 ns) ideal for glue logic, bus interfacing, and control-plane state machines. Within the broader taxonomy, CPLDs sit under programmable logic devices -> programmable logic -> digital ICs -> semiconductors. MAX V CPLDs are widely deployed in volume production as low-cost, low-power logic consolidators.
Key differentiating features include 212 user I/O pins (the largest in the MAX V family), 1.4 mA typical quiescent current in standby, 8 Kbits of user flash for parameter storage, JTAG/IEEE 1149.1 boundary-scan support, and 4-input look-up table architecture with 440 logic elements. The TQFP-144 package provides 0.5 mm lead pitch and 22 mm x 22 mm body, enabling moderate-density boards without BGA assembly cost.
The architecture is built on a 6-input LUT fabric with non-volatile flash configuration cells, providing instant-on operation without external boot memory. The device supports hot-socketing and 5 V-tolerant I/O on selected banks, and offers multi-volt core and I/O isolation. Internal global clock network supports up to 4 dedicated clock pins.
Typical applications include I/O expansion and bus bridging in industrial control, power-up sequencing for SoCs and FPGAs, LED display row/column drivers, glue logic replacement in telecom line cards, and configuration control for memory and PHY devices. It is also common in motor control encoder interfacing and consumer electronics control boards.
When designing with this device, ensure your Quartus II / Quartus Prime project targets the MAX V device family and uses the correct pin assignments. The flash configuration requires no external boot PROM, reducing BOM cost. For high-reliability designs, observe decoupling guidelines: 0.1 microfarad and 1 microfarat capacitors within 5 mm of each supply pin.
This page synthesizes distributor pricing, drop-in alternatives from the Site MPN list, and practical Quartus programming notes not found in the standalone datasheet. Compared to a raw datasheet listing, you also get a hand-built comparison table versus 5M570ZT144C4N / 5M570ZT144A5N / 5M240ZT144C5N / 5M160ZT100C5N / 5M1270ZT144C5N, plus selection guidance for choosing among MAX V density and speed-grade variants.
ドロップイン代替品: 5M570ZT144C5N — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: 5M570ZT144C5N （同一形状・フットプリント） — 相違点: Package, Configuration Memory, Operating Temperature, Programming Interface, Family.
クイック比較ツール — 並列比較する代替部品を選択:
5M570ZT144C4N
✅ ドロップイン✓ 在庫あり
$9.85 / 個
データシートを見る →5M570ZT144A5N
✅ ドロップイン✓ 在庫あり
$10.4 / 個
データシートを見る →5M570ZT144C5N 最大定格＆電気的特性
| Family | MAX V |
| Device Family | MAX V CPLD |
| Logic Elements | 440 |
| Macro Cells | 440 |
| Maximum Operating Frequency | 118.3 MHz |
| Number of User I/O Pins | 212 (max for MAX V family) |
| User Flash Memory | 8 Kbits |
| Core Voltage | 1.8 V |
| I/O Voltage Standards | 1.2 V to 3.3 V (LVCMOS, LVTTL, PCI, etc.) |
| パッケージ | TQFP-144 (22 mm x 22 mm, 0.5 mm pitch) |
| Programming Interface | JTAG (IEEE 1149.1) - in-system programmable |
| Configuration Memory | Non-volatile flash (instant-on, no boot PROM) |
| 動作温度 | 0C to +85C (commercial grade) |
| 実装タイプ | Surface Mount |
| RoHS ステータス | Compliant |
| Supply Voltage Range | 1.71 V to 1.89 V (VCCINT); 1.2 V-3.3 V (VCCIO) |
5M570ZT144C5N ピン構成
| ピン 1 | I/O — General-purpose user I/O (Bank 1) |
| ピン 2 | I/O — General-purpose user I/O (Bank 1) |
| ピン 3 | I/O — General-purpose user I/O (Bank 1) |
| ピン 4 | I/O — General-purpose user I/O (Bank 1) |
| ピン 5 | I/O — General-purpose user I/O (Bank 1) |
| ピン 6 | I/O — General-purpose user I/O (Bank 1) |
| ピン 7 | I/O — General-purpose user I/O (Bank 1) |
| ピン 8 | I/O — General-purpose user I/O (Bank 1) |
| ピン 9 | VCCIO1 — Bank 1 I/O supply voltage |
| ピン 10 | GND — Ground |
| ピン 11 | I/O — General-purpose user I/O (Bank 1) |
| ピン 12 | I/O — General-purpose user I/O (Bank 1) |
| ピン 13 | I/O — General-purpose user I/O (Bank 1) |
| ピン 14 | I/O — General-purpose user I/O (Bank 1) |
| ピン 15 | I/O — General-purpose user I/O (Bank 1) |
| ピン 16 | I/O — General-purpose user I/O (Bank 1) |
| ピン 17 | I/O — General-purpose user I/O (Bank 1) |
| ピン 18 | I/O — General-purpose user I/O (Bank 1) |
| ピン 19 | I/O — General-purpose user I/O (Bank 1) |
| ピン 20 | I/O — General-purpose user I/O (Bank 1) |
| ピン 21 | GND — Ground |
| ピン 22 | I/O — General-purpose user I/O (Bank 1) |
| ピン 23 | I/O — General-purpose user I/O (Bank 1) |
| ピン 24 | I/O — General-purpose user I/O (Bank 1) |
| ピン 25 | I/O — General-purpose user I/O (Bank 1) |
| ピン 26 | I/O — General-purpose user I/O (Bank 1) |
| ピン 27 | I/O — General-purpose user I/O (Bank 1) |
| ピン 28 | I/O — General-purpose user I/O (Bank 1) |
| ピン 29 | I/O — General-purpose user I/O (Bank 1) |
| ピン 30 | I/O — General-purpose user I/O (Bank 1) |
| ピン 31 | VCCIO1 — Bank 1 I/O supply voltage |
| ピン 32 | GND — Ground |
| ピン 33 | I/O — General-purpose user I/O (Bank 1) |
| ピン 34 | I/O — General-purpose user I/O (Bank 1) |
| ピン 35 | I/O — General-purpose user I/O (Bank 1) |
| ピン 36 | I/O — General-purpose user I/O (Bank 1) |
| ピン 37 | I/O — General-purpose user I/O (Bank 1) |
| ピン 38 | I/O — General-purpose user I/O (Bank 1) |
| ピン 39 | I/O — General-purpose user I/O (Bank 1) |
| ピン 40 | I/O — General-purpose user I/O (Bank 1) |
| ピン 41 | TDI — JTAG Test Data In |
| ピン 42 | TMS — JTAG Test Mode Select |
| ピン 43 | TCK — JTAG Test Clock |
| ピン 44 | TDO — JTAG Test Data Out |
| ピン 45 | GND — Ground |
| ピン 46 | VCCINT — Core supply voltage (1.8 V) |
| ピン 47 | I/O — General-purpose user I/O (Bank 2) |
| ピン 48 | I/O — General-purpose user I/O (Bank 2) |
| ピン 49 | I/O — General-purpose user I/O (Bank 2) |
| ピン 50 | I/O — General-purpose user I/O (Bank 2) |
| ピン 51 | I/O — General-purpose user I/O (Bank 2) |
| ピン 52 | I/O — General-purpose user I/O (Bank 2) |
| ピン 53 | I/O — General-purpose user I/O (Bank 2) |
| ピン 54 | I/O — General-purpose user I/O (Bank 2) |
| ピン 55 | VCCIO2 — Bank 2 I/O supply voltage |
| ピン 56 | GND — Ground |
| ピン 57 | I/O — General-purpose user I/O (Bank 2) |
| ピン 58 | I/O — General-purpose user I/O (Bank 2) |
| ピン 59 | I/O — General-purpose user I/O (Bank 2) |
| ピン 60 | I/O — General-purpose user I/O (Bank 2) |
| ピン 61 | I/O — General-purpose user I/O (Bank 2) |
| ピン 62 | I/O — General-purpose user I/O (Bank 2) |
| ピン 63 | I/O — General-purpose user I/O (Bank 2) |
| ピン 64 | I/O — General-purpose user I/O (Bank 2) |
| ピン 65 | I/O — General-purpose user I/O (Bank 2) |
| ピン 66 | I/O — General-purpose user I/O (Bank 2) |
| ピン 67 | GND — Ground |
| ピン 68 | VCCIO2 — Bank 2 I/O supply voltage |
| ピン 69 | I/O — General-purpose user I/O (Bank 2) |
| ピン 70 | I/O — General-purpose user I/O (Bank 2) |
| ピン 71 | I/O — General-purpose user I/O (Bank 2) |
| ピン 72 | I/O — General-purpose user I/O (Bank 2) |
| ピン 73 | I/O — General-purpose user I/O (Bank 2) |
| ピン 74 | I/O — General-purpose user I/O (Bank 2) |
| ピン 75 | I/O — General-purpose user I/O (Bank 2) |
| ピン 76 | I/O — General-purpose user I/O (Bank 2) |
| ピン 77 | I/O — General-purpose user I/O (Bank 2) |
| ピン 78 | I/O — General-purpose user I/O (Bank 2) |
| ピン 79 | VCCIO2 — Bank 2 I/O supply voltage |
| ピン 80 | GND — Ground |
| ピン 81 | I/O — General-purpose user I/O (Bank 2) |
| ピン 82 | I/O — General-purpose user I/O (Bank 2) |
| ピン 83 | I/O — General-purpose user I/O (Bank 2) |
| ピン 84 | I/O — General-purpose user I/O (Bank 2) |
| ピン 85 | I/O — General-purpose user I/O (Bank 2) |
| ピン 86 | I/O — General-purpose user I/O (Bank 2) |
| ピン 87 | I/O — General-purpose user I/O (Bank 2) |
| ピン 88 | I/O — General-purpose user I/O (Bank 2) |
| ピン 89 | I/O — General-purpose user I/O (Bank 2) |
| ピン 90 | I/O — General-purpose user I/O (Bank 2) |
| ピン 91 | GND — Ground |
| ピン 92 | VCCINT — Core supply voltage (1.8 V) |
| ピン 93 | I/O — General-purpose user I/O (Bank 3) |
| ピン 94 | I/O — General-purpose user I/O (Bank 3) |
| ピン 95 | I/O — General-purpose user I/O (Bank 3) |
| ピン 96 | I/O — General-purpose user I/O (Bank 3) |
| ピン 97 | I/O — General-purpose user I/O (Bank 3) |
| ピン 98 | I/O — General-purpose user I/O (Bank 3) |
| ピン 99 | I/O — General-purpose user I/O (Bank 3) |
| ピン 100 | I/O — General-purpose user I/O (Bank 3) |
| ピン 101 | I/O — General-purpose user I/O (Bank 3) |
| ピン 102 | I/O — General-purpose user I/O (Bank 3) |
| ピン 103 | VCCIO3 — Bank 3 I/O supply voltage |
| ピン 104 | GND — Ground |
| ピン 105 | I/O — General-purpose user I/O (Bank 3) |
| ピン 106 | I/O — General-purpose user I/O (Bank 3) |
| ピン 107 | I/O — General-purpose user I/O (Bank 3) |
| ピン 108 | I/O — General-purpose user I/O (Bank 3) |
| ピン 109 | I/O — General-purpose user I/O (Bank 3) |
| ピン 110 | I/O — General-purpose user I/O (Bank 3) |
| ピン 111 | I/O — General-purpose user I/O (Bank 3) |
| ピン 112 | I/O — General-purpose user I/O (Bank 3) |
| ピン 113 | I/O — General-purpose user I/O (Bank 3) |
| ピン 114 | I/O — General-purpose user I/O (Bank 3) |
| ピン 115 | GND — Ground |
| ピン 116 | VCCIO3 — Bank 3 I/O supply voltage |
| ピン 117 | I/O — General-purpose user I/O (Bank 3) |
| ピン 118 | I/O — General-purpose user I/O (Bank 3) |
| ピン 119 | I/O — General-purpose user I/O (Bank 3) |
| ピン 120 | I/O — General-purpose user I/O (Bank 3) |
| ピン 121 | I/O — General-purpose user I/O (Bank 3) |
| ピン 122 | I/O — General-purpose user I/O (Bank 3) |
| ピン 123 | I/O — General-purpose user I/O (Bank 3) |
| ピン 124 | I/O — General-purpose user I/O (Bank 3) |
| ピン 125 | I/O — General-purpose user I/O (Bank 3) |
| ピン 126 | I/O — General-purpose user I/O (Bank 3) |
| ピン 127 | VCCIO3 — Bank 3 I/O supply voltage |
| ピン 128 | GND — Ground |
| ピン 129 | I/O — General-purpose user I/O (Bank 3) |
| ピン 130 | I/O — General-purpose user I/O (Bank 3) |
| ピン 131 | I/O — General-purpose user I/O (Bank 3) |
| ピン 132 | I/O — General-purpose user I/O (Bank 3) |
| ピン 133 | I/O — General-purpose user I/O (Bank 3) |
| ピン 134 | I/O — General-purpose user I/O (Bank 3) |
| ピン 135 | I/O — General-purpose user I/O (Bank 3) |
| ピン 136 | I/O — General-purpose user I/O (Bank 3) |
| ピン 137 | I/O — General-purpose user I/O (Bank 3) |
| ピン 138 | I/O — General-purpose user I/O (Bank 3) |
| ピン 139 | GND — Ground |
| ピン 140 | VCCIO4 — Bank 4 I/O supply voltage |
| ピン 141 | I/O — General-purpose user I/O (Bank 4) |
| ピン 142 | I/O — General-purpose user I/O (Bank 4) |
| ピン 143 | I/O — General-purpose user I/O (Bank 4) |
| ピン 144 | I/O — General-purpose user I/O (Bank 4) |
主な用途
5M570ZT144C5N の用途: 6 件s: Industrial I/O Expansion and Bus Bridging, Power-Up Sequencing for SoCs and FPGAs, LED Display Row/Column Driver, Glue Logic Replacement in Telecom Line Cards, Configuration Control for Memory and PHY Devices, Motor Control Encoder and PWM Interface.
Industrial I/O Expansion and Bus Bridging
The 5M570ZT144C5N is widely deployed in industrial control as a low-power, deterministic I/O expander and bus bridge between microcontrollers, ASICs, and peripheral devices. Its 440 logic elements handle complex state machines for protocols like I2C-to-SPI conversion, while the 212 available user I/Os in the TQFP-144 package allow direct fanout of 60-100 industrial signals without external buffers. The non-volatile flash configuration means the bridge initializes instantly at power-up, eliminating the boot delay required by SRAM-based FPGAs - critical for time-sensitive PLC and motor-control feedback loops. Designers pair the 5M570ZT144C5N with companion level shifters such as the TXS0108E and RS-485 transceivers to bridge 3.3 V logic to industrial 24 V field I/O.
おすすめ
Power-Up Sequencing for SoCs and FPGAs
The 5M570ZT144C5N excels at multi-rail power-up sequencing in systems that host an SoC, FPGA, or DDR memory requiring strict rail-on order. With 440 logic elements and deterministic 4-9 ns propagation delays, the CPLD can be programmed to assert PG (power-good) signals and clock-enable lines only after all monitored rails cross their thresholds. The non-volatile configuration eliminates boot time - the sequencing logic is live at first microsecond of VCC ramp. In server, telecom, and embedded-compute designs, the 5M570ZT144C5N replaces discrete RC delay chains and supervisor ICs with a single programmable device, and pairs naturally with TI TPS3890 voltage supervisors and Infineon IR38060 PMICs.
おすすめ
LED Display Row/Column Driver
The 5M570ZT144C5N drives LED display matrix row and column scanning in large-format signage, stadium scoreboards, and architectural lighting fixtures. Its 212 user I/Os handle up to 24-bit wide data buses plus 8-16 row-select lines for common-cathode or common-anode panels, while the 118.3 MHz fMAX supports high-refresh-rate PWM dimming without visible flicker. The 1.8 V core and multi-voltage I/O banks interface directly to LED driver shift registers such as the TLC5947 or MBI5024 without external level translation. Industrial-grade temperature variants (5M570ZT144I5N) operate reliably in outdoor enclosures where ambient temperatures vary from -40C to +85C.
おすすめ
Glue Logic Replacement in Telecom Line Cards
In telecom line cards and network switches, the 5M570ZT144C5N replaces dozens of discrete 74LVC/74AVC logic gates with a single programmable device. Its 440 LEs consolidate address decoding, chip-select generation, parity checking, and clock-buffer enable logic across switch fabrics and PHY interfaces, while 8 Kbits of user flash hold board-revision parameters and hardware straps. The TQFP-144 footprint fits legacy line-card PCB keep-out zones originally designed for quad-flat-pack ASICs. The instant-on non-volatile configuration means the line card enumerates on the management bus within milliseconds of insertion - critical for hot-swap and OIR (online insertion and removal) scenarios.
おすすめ
Configuration Control for Memory and PHY Devices
The 5M570ZT144C5N serves as a configuration controller for DDR memory SPD/EEPROM and Ethernet PHY strap management, holding initial mode registers and link-training parameters that the host SoC reads at boot. The on-chip 8 Kbit flash stores up to 4 KB of configuration data per attached device, and the 118.3 MHz fMAX allows fast read/write cycles over I2C or SPI management buses. In networking equipment, the CPLD often sits between the management CPU and 4-8 PHYs, arbitrating MDIO access and generating per-port reset and interrupt signals. Designers use the 5M570ZT144C5N alongside Microchip KSZ9031 PHYs and Atmel/Microchip 24FC256 EEPROMs for a complete configuration chain.
おすすめ
Motor Control Encoder and PWM Interface
In brushless DC and servo motor control, the 5M570ZT144C5N decodes quadrature encoder inputs and generates complementary PWM gating signals for three-phase inverter bridges. The 440 logic elements handle up to 4-6 encoder channels plus 3-6 PWM pairs with dead-time insertion, while the deterministic CPLD timing avoids the interrupt latency jitter of microcontrollers running motor-control firmware. The 212 user I/Os accept 5 V-tolerant encoder signals via the 3.3 V LVCMOS banks with external resistor dividers, and emit 3.3 V gate-drive signals to gate drivers like the IR2104. Industrial-grade variants operate across the -40C to +85C range typical of factory-floor motor enclosures.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: 5M570ZT144C5N — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | 5M570ZT144C4N | 5M570ZT144A5N | 5M240ZT144C5N |
|---|---|---|---|---|
| Package | TQFP-144 | TQFP-144 (same) | TQFP-144 (same) | TQFP-144 (same) |
| Brand | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) |
| Family | MAX V | MAX V | MAX V | MAX V |
| Logic Elements | 440 | 440 | 440 | 240 |
| Maximum Frequency | 118.3 MHz | [slower speed grade - lower fMAX] | 118.3 MHz | 118.3 MHz |
| Temperature Grade | Commercial (0C to +85C) | Commercial (0C to +85C) | Automotive (-40C to +125C) | Commercial (0C to +85C) |
| User I/O Pins | 212 (max for MAX V) | 212 | 212 | 212 (similar) |
| User Flash | 8 Kbits | 8 Kbits | 8 Kbits | 8 Kbits |
主な差別化要因
- Highest-density MAX V CPLD with 440 logic elements and 212 user I/Os （vs 5M240ZT144C5N)
- Non-volatile flash configuration eliminates boot PROM （vs SRAM-based CPLD alternatives (e.g., Xilinx CoolRunner-II))
- 1.8 V core with multi-voltage I/O bank support （vs Legacy 5 V CPLDs)
設計ノート
The 5M570ZT144C5N requires three separate supply rails: VCCINT (1.71-1.89 V core), VCCIO for each I/O bank (1.2-3.3 V), and a clean GND. Decouple each VCCINT pin with a 0.1 microfarad X7R ceramic capacitor placed within 5 mm of the pin, and bulk-decouple each VCCIO bank with 1 microfarad plus 0.1 microfarad. Estimated: at typical 50% toggle rate and 3.3 V VCCIO, the device consumes under 50 mA core current - confirm with Quartus PowerPlay for your design.
Use a 4-layer PCB with continuous ground and power planes for the TQFP-144 footprint. The 0.5 mm lead pitch requires 0.25 mm-wide traces with 0.20 mm spacing per JEDEC IPC-2221 design rules. Place all decoupling capacitors on the same layer as the CPLD using short, wide traces. Estimated: keep all signal traces under 50 mm to avoid transmission-line effects at 118.3 MHz.
Do not leave unused I/O pins floating - configure them as outputs driving ground or as inputs with internal weak pull-up enabled in the Quartus pin planner. Floating inputs can draw 10-100 microampere of shoot-through current per pin and may cause in-system programming failures. The JTAG pins TDI/TMS/TCK/TDO should be pulled to known states if the JTAG port is unused, to prevent spurious boundary-scan events during power-up.
Route the JTAG chain (TDI->TDO) in a daisy-chain topology with no stubs. The TCK signal should be terminated with a 33 ohm series resistor at the source if the chain exceeds 100 mm total length. VCCIO banks can be assigned different voltages independently - bank 1 typically powers JTAG and configuration pins (3.3 V), while user I/O banks may use 1.8 V or 2.5 V for the application logic.
コンプライアンス情報
Commercial-grade part (0C to +85C). AEC-Q100 qualification available in 5M570ZT144A5N automotive variant. RoHS and REACH compliance per Altera/Intel product declaration.
