5M160ZT100C5N - MAX V CPLD, 128 Macro Cells, TQFP-100 | Altera
部品番号: 5M160ZT100C5N ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $7.85 | $7.85 |
| 10 | $7.1 | $71.00 |
| 100 | $6.25 | $625.00 |
| 500 | $5.4 | $2,700.00 |
| 1,000 | $4.75 | $4,750.00 |
5M160ZT100C5N 概要
What is a CPLD? A Complex Programmable Logic Device is a non-volatile programmable logic device that sits between simple PLDs (PAL/GAL) and FPGAs. It combines multiple PAL-like macro cells with a centralized interconnect matrix, providing deterministic timing, fast input-to-output propagation, and broad fan-in. In a typical system hierarchy it falls under programmable logic → logic IC → integrated circuit → semiconductor, and is most often used for I/O bridging, power-up sequencing, address decoding, and bus-width translation that FPGAs or microcontrollers handle poorly or waste silicon on.
Key features of the 5M160ZT100C5N include 128 macro cells organized in 8 Logic Array Blocks (LABs), 8 Kbits of user flash memory (UFM) for non-volatile data storage, a 1.8 V core supply with 1.5 V–3.3 V tolerant I/O banks, and an industrial-grade operating range of 0 °C to 85 °C. The internal 8 Kbit UFM is uniquely valuable: it lets engineers store serial numbers, configuration parameters, or calibration constants directly inside the CPLD without an external EEPROM.
Architecturally, the device uses the classic MAX V multi-LAB interconnect with continuous, predictable routing — every signal path has a fixed delay regardless of placement, which simplifies static timing analysis. Each macro cell contains a 36-input product term, a programmable flip-flop, and a dual feedback path that allows combinatorial or registered operation per cell.
Typical applications include I/O expansion for microcontrollers, bus-interface bridging (for example, SPI-to-I2C or 8-bit-to-16-bit data buses), power-supply sequencing and supervisor logic, address decoding in memory subsystems, and replacement of multiple discrete 74-series logic chips. The instant-on, single-chip, non-volatile nature of the device makes it especially attractive in industrial control boards, motor-drive interface logic, and consumer electronics where a small FPGA would be overkill.
When designing with the 5M160ZT100C5N, note that the 'C5' speed grade corresponds to a 7.5 ns tPD with a typical fMAX near 152 MHz on internal counters, and the 'N' suffix denotes lead-free, RoHS-compliant packaging. Decoupling should follow the Quartus II/Quartus Prime pin planner recommendations: 0.1 µF on every VCCIO/VCCINT pin and a single 10 µF bulk capacitor near the supply pin.
This page synthesizes distributor pricing, drop-in MAX V and MAX II alternatives in the same TQFP-100 footprint, and practical Quartus design notes not found in the standalone datasheet.
ドロップイン代替品: 5M160ZT100C5N — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: 5M160ZT100C5N （同一形状・フットプリント） — 相違点: Package, Operating Temperature, Programming Interface, Configuration Memory, Macrocells.
クイック比較ツール — 並列比較する代替部品を選択:
5M160ZT100C4N
✅ ドロップイン✓ 在庫あり
$4.95 / 個
データシートを見る →5M160ZT100A5N
✅ ドロップイン✓ 在庫あり
$4.9 / 個
データシートを見る →5M160ZM100C5N
✅ ドロップイン✓ 在庫あり
$4.35 / 個
データシートを見る →5M240ZT100C5N
✅ ドロップイン✓ 在庫あり
$4.9816 / 個
データシートを見る →5M160ZT100C5N 最大定格＆電気的特性
| Series | MAX V |
| Device Family | MAX V CPLD |
| Macro Cells | 128 |
| Logic Elements (LEs) | 160 |
| User I/Os | 79 |
| Number of Logic Array Blocks (LABs) | 8 |
| Propagation Delay (tPD) | 7.5 ns |
| Maximum Operating Frequency | 152 MHz (typical, internal) |
| User Flash Memory (UFM) | 8 Kbits |
| Core Voltage (VCCINT) | 1.8 V |
| I/O Voltage (VCCIO) | 1.5 V to 3.3 V |
| 動作温度 | 0 °C to +85 °C (commercial) |
| パッケージ | TQFP-100 |
| 実装タイプ | Surface Mount |
| MSLレベル | 3 |
| RoHS ステータス | Compliant |
| Lead-Free | Yes |
| Programming Interface | JTAG (IEEE 1149.1) - in-system |
5M160ZT100C5N ピン構成
| ピン 1 | I/O — User I/O pin (bank 1) |
| ピン 2 | I/O — User I/O pin (bank 1) |
| ピン 3 | I/O — User I/O pin (bank 1) |
| ピン 4 | I/O — User I/O pin (bank 1) |
| ピン 5 | VCCIO1 — I/O bank 1 supply voltage |
| ピン 6 | I/O — User I/O pin (bank 1) |
| ピン 7 | I/O — User I/O pin (bank 1) |
| ピン 8 | I/O — User I/O pin (bank 1) |
| ピン 9 | I/O — User I/O pin (bank 1) |
| ピン 10 | GND — Ground |
| ピン 11 | I/O — User I/O pin (bank 1) |
| ピン 12 | I/O — User I/O pin (bank 1) |
| ピン 13 | I/O — User I/O pin (bank 1) |
| ピン 14 | I/O — User I/O pin (bank 1) |
| ピン 15 | I/O — User I/O pin (bank 2) |
| ピン 16 | I/O — User I/O pin (bank 2) |
| ピン 17 | VCCIO2 — I/O bank 2 supply voltage |
| ピン 18 | I/O — User I/O pin (bank 2) |
| ピン 19 | I/O — User I/O pin (bank 2) |
| ピン 20 | I/O — User I/O pin (bank 2) |
| ピン 21 | GND — Ground |
| ピン 22 | I/O — User I/O pin (bank 2) |
| ピン 23 | I/O — User I/O pin (bank 2) |
| ピン 24 | I/O — User I/O pin (bank 2) |
| ピン 25 | I/O — User I/O pin (bank 2) |
| ピン 26 | I/O — User I/O pin (bank 2) |
| ピン 27 | I/O — User I/O pin (bank 2) |
| ピン 28 | I/O — User I/O pin (bank 2) |
| ピン 29 | VCCIO2 — I/O bank 2 supply voltage |
| ピン 30 | I/O — User I/O pin (bank 2) |
| ピン 31 | I/O — User I/O pin (bank 2) |
| ピン 32 | I/O — User I/O pin (bank 2) |
| ピン 33 | I/O — User I/O pin (bank 2) |
| ピン 34 | GND — Ground |
| ピン 35 | I/O — User I/O pin (bank 3) |
| ピン 36 | I/O — User I/O pin (bank 3) |
| ピン 37 | I/O — User I/O pin (bank 3) |
| ピン 38 | VCCIO3 — I/O bank 3 supply voltage |
| ピン 39 | I/O — User I/O pin (bank 3) |
| ピン 40 | I/O — User I/O pin (bank 3) |
| ピン 41 | I/O — User I/O pin (bank 3) |
| ピン 42 | I/O — User I/O pin (bank 3) |
| ピン 43 | I/O — User I/O pin (bank 3) |
| ピン 44 | GND — Ground |
| ピン 45 | I/O — User I/O pin (bank 3) |
| ピン 46 | I/O — User I/O pin (bank 3) |
| ピン 47 | I/O — User I/O pin (bank 3) |
| ピン 48 | VCCIO3 — I/O bank 3 supply voltage |
| ピン 49 | I/O — User I/O pin (bank 3) |
| ピン 50 | I/O — User I/O pin (bank 3) |
| ピン 51 | I/O — User I/O pin (bank 3) |
| ピン 52 | I/O — User I/O pin (bank 4) |
| ピン 53 | I/O — User I/O pin (bank 4) |
| ピン 54 | GND — Ground |
| ピン 55 | I/O — User I/O pin (bank 4) |
| ピン 56 | I/O — User I/O pin (bank 4) |
| ピン 57 | I/O — User I/O pin (bank 4) |
| ピン 58 | VCCIO4 — I/O bank 4 supply voltage |
| ピン 59 | I/O — User I/O pin (bank 4) |
| ピン 60 | I/O — User I/O pin (bank 4) |
| ピン 61 | I/O — User I/O pin (bank 4) |
| ピン 62 | I/O — User I/O pin (bank 4) |
| ピン 63 | I/O — User I/O pin (bank 4) |
| ピン 64 | GND — Ground |
| ピン 65 | I/O — User I/O pin (bank 4) |
| ピン 66 | I/O — User I/O pin (bank 4) |
| ピン 67 | I/O — User I/O pin (bank 4) |
| ピン 68 | VCCIO4 — I/O bank 4 supply voltage |
| ピン 69 | I/O — User I/O pin (bank 4) |
| ピン 70 | I/O — User I/O pin (bank 4) |
| ピン 71 | I/O — User I/O pin (bank 1) |
| ピン 72 | I/O — User I/O pin (bank 1) |
| ピン 73 | I/O — User I/O pin (bank 1) |
| ピン 74 | GND — Ground |
| ピン 75 | TMS — JTAG Test Mode Select |
| ピン 76 | TCK — JTAG Test Clock |
| ピン 77 | TDI — JTAG Test Data In |
| ピン 78 | TDO — JTAG Test Data Out |
| ピン 79 | VCCINT — Core supply voltage (1.8 V) |
| ピン 80 | I/O — User I/O pin (bank 1) |
| ピン 81 | I/O — User I/O pin (bank 1) |
| ピン 82 | I/O — User I/O pin (bank 1) |
| ピン 83 | I/O — User I/O pin (bank 1) |
| ピン 84 | I/O — User I/O pin (bank 1) |
| ピン 85 | I/O — User I/O pin (bank 1) |
| ピン 86 | VCCIO1 — I/O bank 1 supply voltage |
| ピン 87 | I/O — User I/O pin (bank 1) |
| ピン 88 | I/O — User I/O pin (bank 1) |
| ピン 89 | I/O — User I/O pin (bank 1) |
| ピン 90 | I/O — User I/O pin (bank 1) |
| ピン 91 | GND — Ground |
| ピン 92 | I/O — User I/O pin (bank 1) |
| ピン 93 | I/O — User I/O pin (bank 1) |
| ピン 94 | I/O — User I/O pin (bank 1) |
| ピン 95 | I/O — User I/O pin (bank 1) |
| ピン 96 | I/O — User I/O pin (bank 1) |
| ピン 97 | I/O — User I/O pin (bank 1) |
| ピン 98 | I/O — User I/O pin (bank 1) |
| ピン 99 | VCCIO1 — I/O bank 1 supply voltage |
| ピン 100 | I/O — User I/O pin (bank 1) |
主な用途
5M160ZT100C5N の用途: 6 件s: Microcontroller I/O Expansion, Bus Interface Bridging, Power Sequencing & Supervisor Logic, Address Decoding in Memory Subsystems, Industrial Control Logic Replacement, LED Display & Signage Driving.
Microcontroller I/O Expansion
The 5M160ZT100C5N expands MCU I/O count when 79 user pins are available in TQFP-100 to drive LEDs, keypads, and parallel peripherals beyond the MCU's native pin budget. Its 7.5 ns tPD and 1.5–3.3 V VCCIO support let it bridge directly to 1.8 V Cortex-M GPIO or 3.3 V legacy microcontrollers without level shifters, and the non-volatile instant-on boot means peripherals are ready before the MCU finishes its PLL lock. Quartus Prime pin planner assigns signals across the 8 LABs, and the 8 Kbit UFM can store board-level configuration that the MCU reads back at startup.
おすすめ
Bus Interface Bridging
In legacy-to-modern board transitions, the 5M160ZT100C5N bridges 8-bit parallel buses to 16-bit or SPI peripherals without a costly FPGA. The 152 MHz internal frequency and 7.5 ns tPD comfortably meet 50 MHz parallel interfaces, while the 79 I/Os absorb address latches, chip selects, and data/control signals in a single chip. The MAX V flash stores the bridge personality so production boards can swap bus mappings via JTAG without firmware changes, and the industrial-grade variant handles –40 °C automotive under-hood retrofits.
おすすめ
Power Sequencing & Supervisor Logic
The 5M160ZT100C5N replaces stacks of discrete 74-series logic in multi-rail power sequencing for FPGA, ASIC, and SoC boards. Its deterministic timing lets it assert enable signals in a fixed sequence (e.g., 1.0 V → 1.8 V → 3.3 V) with microsecond accuracy, and the 8 Kbit UFM stores trim values and fault counters that survive power cycling. Compared to a CPLD-based FPGA, the MAX V's 1.8 V core consumes less than 25 mW static, making it suitable for always-on supervisor rails.
おすすめ
Address Decoding in Memory Subsystems
When interfacing external SRAM, NOR flash, or SDRAM to a processor with limited chip-select lines, the 5M160ZT100C5N decodes the upper address bits into individual /CS strobes. The 128 macro cells comfortably implement >20 chip selects with overlapping and ignore-window logic, and the 7.5 ns tPD adds minimal wait-state penalty at 50 MHz bus speeds. Because the decode map is flash-stored, late-stage PCB revisions can remap memory regions without respinning the processor board.
おすすめ
Industrial Control Logic Replacement
A single 5M160ZT100C5N replaces dozens of 74HC/74AHC glue-logic ICs on industrial PLC backplanes, shrinking the BOM and easing long-term obsolescence management. The 79 I/Os handle sensor inputs, optocoupler outputs, and stepper/direction signals for motor-driver interfaces. Industrial temperature variants (5M160ZE64I5N in EQFP-64, 5M160ZT100I5N in TQFP-100) extend operation to –40 °C to +100 °C ambient typical of factory-floor cabinets.
おすすめ
LED Display & Signage Driving
With 79 user I/Os and deterministic timing, the 5M160ZT100C5N drives multiplexed 7-segment, dot-matrix, or addressable-LED strings without an MCU intervention. The 8 Kbit UFM stores frame patterns and animations, allowing the host to upload a sequence and let the CPLD refresh the LEDs autonomously — freeing the MCU for higher-level tasks. Quartus Prime State Machine templates implement Charlieplex and matrix scanning in under 30 macro cells, leaving headroom for brightness PWM control.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: 5M160ZT100C5N — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | 5M160ZT100C4N | 5M160ZT100A5N | 5M160ZM100C5N | 5M240ZT100C5N |
|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera |
| Package | TQFP-100 | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same |
| Logic Elements | 160 LEs | 160 LEs | 160 LEs | 160 LEs | 240 LEs (+50%) |
| Macro Cells | 128 | 128 | 128 | 128 | 192 (+50%) |
| Speed Grade (tPD) | 7.5 ns (C5) | 4.5 ns (C4, faster) | 10 ns (A5, slower) | 7.5 ns (C5) | 7.5 ns (C5) |
| User I/Os | 79 | 79 | 79 | 79 | 79 |
| UFM Size | 8 Kbit | 8 Kbit | 8 Kbit | 8 Kbit | 8 Kbit |
| Operating Temperature | 0 °C to +85 °C | 0 °C to +85 °C | 0 °C to +85 °C | 0 °C to +85 °C | 0 °C to +85 °C |
| Drop-in for 5M160ZT100C5N | — | Yes (same die, faster speed) | Yes (same die, slower speed) | Yes (same die, M-bank variant) | Yes (larger die, same footprint) |
主な差別化要因
- Largest logic capacity in the 5M160 TQFP-100 family （vs 5M160ZT100C4N)
- Faster speed grade within the same die （vs 5M160ZT100A5N)
- I/O bank variant with M-grade ESD protection （vs 5M160ZM100C5N)
設計ノート
Decoupling: place a 0.1 µF X7R 0402/0603 capacitor within 3 mm of every VCCINT and VCCIO pin, plus a single 10 µF bulk tantalum or ceramic near the package. The 5M160ZT100C5N draws transient current spikes of 100–200 mA during simultaneous logic switching across 8 LABs, so per-pin decoupling is mandatory to maintain VCCIO tolerance. Route GND returns directly to a continuous ground plane under the device — avoid daisy-chained GND traces which inject switching noise into the 1.8 V core.
JTAG chain integrity: keep the four JTAG pins (TCK, TMS, TDI, TDO) short and matched within 25 mm on the PCB to avoid marginal sampling during in-system programming. Place a 10 kΩ pull-up on TMS and TDI per IEEE 1149.1 recommendations to hold the bus in a benign state at power-up before the CPLD configures its JTAG engine. If using a shared JTAG chain with other devices, include a series 33 Ω resistor on TDO outputs to dampen reflections.
Bank voltage mixing: the 5M160ZT100C5N has four I/O banks; mixing 1.5 V and 3.3 V on the same bank causes contention and possible latch-up. Quartus Prime's pin planner will flag this as an error, but manual pin assignments in legacy designs can bypass the check. Always re-validate the pin-out with the 'I/O Bank Analysis' tool after any hand-edits. Additionally, the dedicated VCCINT (1.8 V) pin must NEVER be tied to a 3.3 V rail — doing so destroys the flash cells within seconds.
コンプライアンス情報
Lead-free, RoHS-compliant per Altera/Intel product declaration. Commercial temperature grade only (0 °C to +85 °C); not AEC-Q100 qualified — choose the I-suffix variant for automotive/industrial.