A3P060-FG144 - 60K Gate ProASIC3 FPGA | Microchip
部品番号: A3P060-FG144 ✓ 生産中A3P060-FG144 概要
An FPGA is a programmable semiconductor whose digital logic blocks, interconnect, and I/O can be configured after manufacture. The A3P060 belongs to the ProASIC3 family, which combines flash-based nonvolatile configuration with low-power operation, small-footprint packaging, and reprogrammability. It is intended for compact control, interface, data-capture, and embedded-processing designs that require a short path between a defined logic architecture and a finished PCB.
Key device attributes include a maximum stated performance of 231 MHz, 1,536 logic cells across 96 logic-element blocks, 18 Kb of block RAM, and 96 I/O. The 144-FPBGA package measures 13 x 13 mm and is offered in a tray configuration for the identified commercial part. Its 130 nm process supports integration within a relatively compact board area while maintaining a low-cost design entry point.
The ProASIC3 architecture separates programmable logic from fixed peripheral functions, allowing designers to implement control logic, counters, state machines, bus controllers, and data paths in one device. Flash-based configuration means the logic image is retained in the device, eliminating the need for a separate configuration PROM when the system does not require runtime reconfiguration.
Typical uses include industrial control modules, test and measurement front ends, communications adapters, embedded instrumentation, and compact consumer or automotive-adjacent products. The 96 I/O count supports external memory interfaces, communication transceivers, status indicators, and sensor conditioning front ends while retaining a small package footprint.
Designers should confirm the board footprint, ball assignment, voltage rails, clock requirements, and configuration interface against the manufacturer documentation before layout release. The FG144 package requires careful via-in-pad and escape-routing planning because its fine-pitch ball grid constrains access to inner rows.
This page combines the manufacturer's A3P060 family information with distributor package, capacity, temperature, and sourcing details, then adds same-footprint speed and temperature alternatives, comparison parameters, and practical PCB guidance for design evaluation.
ドロップイン代替品: A3P060-FG144 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: A3P060-FG144 (同一形状・フットプリント) — 相違点: Package, Device Type, Logic Elements, Configuration Memory, Process Technology.
A3P060-FG144I
✅ ドロップイン価格はお問い合わせください
データシートを見る →A3P060-FGG144
✅ ドロップイン価格はお問い合わせください
データシートを見る →A3P060-FGG144I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
A3P060-1FGG144T
✅ ドロップイン📋 参考代替品(カタログ未掲載)
A3P060-FGG144C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
A3P060-FG144 最大定格&電気的特性
| Device Type | ProASIC3 field-programmable gate array |
| Logic Gates | 60,000 gates |
| Logic Elements | 700 logic elements |
| Logic Cells | 1,536 logic cells |
| Maximum Performance Frequency | 231 MHz |
| Block RAM | 18 Kb |
| User I/O Count | 96 I/O |
| Core Supply Voltage | 1.5 V |
| Process Technology | 130 nm CMOS |
| Configuration Memory | Flash-based nonvolatile configuration |
| パッケージ | 144-FPBGA, 13 x 13 mm |
| 実装タイプ | Surface mount |
| Commercial Junction Temperature | 0 °C to +85 °C |
| Shipping Format | Tray |
| Device Family | ProASIC3 |
| Programmability | User-programmable logic and I/O |
A3P060-FG144 144-fpbga, 13 x 13 mm ピン配置ガイド
A3P060-FG144 (144-fpbga, 13 x 13 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: A3P060-FG144.
詳細は データシート をご参照ください。
主な用途
A3P060-FG144 の用途: 6 件s: Compact Industrial Control Module, Test and Measurement Front End, Communication Interface Adapter, Embedded Data Acquisition, Programmable Logic Controller Platform, Low-Cost Custom I/O Controller.
Compact Industrial Control Module
The A3P060-FG144 fits compact industrial controllers that combine sequencing, status logic, and external interfaces in one programmable device. Its 96 I/O can connect digital sensors, actuator drivers, limit switches, and communication transceivers, while the 18 Kb of block RAM supports counters, queues, and short data buffers. The 231 MHz standard speed grade is appropriate for control paths operating below the device's maximum stated frequency. In a commercial-temperature enclosure, the A3P060 provides reprogrammable logic without a separate configuration memory. PCB planning should reserve clean routing for the 144-FPBGA grid and follow the manufacturer power and decoupling recommendations.
おすすめ
Test and Measurement Front End
The A3P060-FG144 can implement trigger logic, timing control, data capture, and interface management for a test-and-measurement front end. Sixty-seven logic-element blocks and 18 Kb of block RAM are sufficient for small acquisition pipelines and protocol state machines, while 96 I/O provide connections to sensors, ADC control lines, and status indicators. The 1.5 V core supply simplifies partitioning into low-voltage digital and higher-voltage interface domains. At up to 231 MHz, the standard FG grade should be selected only when post-route timing meets the required acquisition rate. Designers should use the official clock and pin tables to keep configuration, clock, and data paths free of unnecessary routing congestion.
おすすめ
Communication Interface Adapter
The A3P060-FG144 is suitable for protocol adapters that translate between a host interface and a dedicated external bus. Its 96 I/O support address, data, enable, interrupt, and handshake signals, while programmable logic can implement framing, filtering, byte alignment, and error checking. The 18 Kb block RAM can buffer short packets or maintain command and status queues without a separate external memory. The ProASIC3 flash configuration also allows the adapter to retain its logic after power removal. Layout should reserve the FPGA's 144-FPBGA escape routing and separate switching or transceiver return currents from sensitive configuration and clock inputs.
おすすめ
Embedded Data Acquisition
The A3P060-FG144 can act as the central logic device in a small embedded acquisition system that collects parallel sensor data and forwards it to a processor or memory. Its 96 I/O provide ample parallel connections, while 1,536 logic cells and 18 Kb of block RAM support channel multiplexing, trigger matrices, sampling counters, and short buffering operations. The 231 MHz maximum stated speed gives the design headroom for moderately parallel logic, although system timing must be evaluated after routing. The commercial junction range of 0 °C to +85 °C makes it appropriate for indoor equipment; extended environmental exposure calls for the industrial-temperature ordering option.
おすすめ
Programmable Logic Controller Platform
The A3P060-FG144 suits small PLC and machine-control platforms where logic must be updated without changing the PCB. Its reprogrammable ProASIC3 architecture supports deterministic sequencing, interlocks, edge detection, counters, and modular I/O mapping within 700 logic elements and 1,536 logic cells. The 96 user I/O allow direct connection to field sensors and actuators, reducing the number of surrounding discrete interface components. Flash-based configuration retains the control program through power cycles, while the 144-FPBGA keeps the digital core compact. Verify timing closure and I/O drive requirements against the specific machine, and use the manufacturer pin tables for every externally accessible signal.
おすすめ
Low-Cost Custom I/O Controller
The A3P060-FG144 is useful when a product requires programmable I/O behavior but not a large processor subsystem. Its 96 I/O can operate as configurable status inputs, relay-control outputs, indicators, and interface handshakes, while 18 Kb of block RAM supports debounce counters, history buffers, and communication frames. The 60,000-gate ProASIC3 implementation provides a compact single-chip solution with low total ownership cost. The commercial FG grade is appropriate where the junction temperature remains within 0 °C to +85 °C. During board design, account for the fine-pitch 144-FPBGA escape pattern and place decoupling and configuration-interface components according to the manufacturer's reference guidance.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: A3P060-FG144 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | A3P060-FG144I | A3P060-FGG144 | A3P060-FGG144I | A3P060-1FGG144T | A3P060-FGG144C |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 144-FPBGA, 13 x 13 mm | 144-FPBGA, 13 x 13 mm | 144-FPBGA, 13 x 13 mm | 144-FPBGA, 13 x 13 mm | 144-FPBGA, 13 x 13 mm | 144-FPBGA, 13 x 13 mm |
| Device Family | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 |
主な差別化要因
- Standard 231 MHz speed grade with commercial-temperature specification (vs A3P060-FGG144)
- Direct commercial-to-industrial footprint migration (vs A3P060-FG144I)
- Established 144-FPBGA package with 96 user I/O (vs A3P060-1FGG144T)
設計ノート
The 144-FPBGA uses a fine-pitch ball grid in a 13 x 13 mm package, so inner-row escape routing must be planned before schematic sign-off. Follow the Microchip package drawing and pin-description table for ball locations, power, ground, configuration, and user-I/O assignments. Do not infer pad coordinates from a generic BGA library; the 13 x 13 mm outline and its ball map determine whether a component footprint matches the released design.
Implement the 1.5 V core rail with the decoupling network and power distribution arrangement recommended in the ProASIC3 family documentation. Place the closest high-frequency capacitors directly at the relevant supply and ground balls, then provide bulk capacitance near the regulator. Keep high-current switching returns and external transceiver supplies away from configuration and clock inputs so that supply transients do not disturb the device's nonvolatile configuration interface.
Do not interchange ordering suffixes without checking the required speed and temperature grades. A3P060-FG144 is the standard 231 MHz commercial version, while FGG144 variants use the G speed designation and the I suffix identifies industrial temperature. Confirm the exact suffix, packing format, operating-temperature requirement, and timing constraints before releasing a production BOM or approving a substitute on an existing PCB.
Route clock inputs and configuration signals as short, continuous paths with reference-plane continuity and avoid stubs created by unnecessary test pads. Because the ProASIC3 configuration is retained in flash, configuration pins remain sensitive to unintended noise during power transitions. Apply the manufacturer's guidance for unused pins, external pull components, and configuration-interface implementation rather than applying generic pull-up or pull-down assumptions across all balls.
コンプライアンス情報
Compliance statements were not identified in the referenced manufacturer and distributor pages. Use the manufacturer's current material-compliance declaration for the exact A3P060-FG144 ordering code before production release.