A3P060-FG144 - 60K Gate ProASIC3 FPGA | Microchip
MPN: A3P060-FG144 ✓ 啟用中A3P060-FG144 概覽
An FPGA is a programmable semiconductor whose digital logic blocks, interconnect, and I/O can be configured after manufacture. The A3P060 belongs to the ProASIC3 family, which combines flash-based nonvolatile configuration with low-power operation, small-footprint packaging, and reprogrammability. It is intended for compact control, interface, data-capture, and embedded-processing designs that require a short path between a defined logic architecture and a finished PCB.
Key device attributes include a maximum stated performance of 231 MHz, 1,536 logic cells across 96 logic-element blocks, 18 Kb of block RAM, and 96 I/O. The 144-FPBGA package measures 13 x 13 mm and is offered in a tray configuration for the identified commercial part. Its 130 nm process supports integration within a relatively compact board area while maintaining a low-cost design entry point.
The ProASIC3 architecture separates programmable logic from fixed peripheral functions, allowing designers to implement control logic, counters, state machines, bus controllers, and data paths in one device. Flash-based configuration means the logic image is retained in the device, eliminating the need for a separate configuration PROM when the system does not require runtime reconfiguration.
Typical uses include industrial control modules, test and measurement front ends, communications adapters, embedded instrumentation, and compact consumer or automotive-adjacent products. The 96 I/O count supports external memory interfaces, communication transceivers, status indicators, and sensor conditioning front ends while retaining a small package footprint.
Designers should confirm the board footprint, ball assignment, voltage rails, clock requirements, and configuration interface against the manufacturer documentation before layout release. The FG144 package requires careful via-in-pad and escape-routing planning because its fine-pitch ball grid constrains access to inner rows.
This page combines the manufacturer's A3P060 family information with distributor package, capacity, temperature, and sourcing details, then adds same-footprint speed and temperature alternatives, comparison parameters, and practical PCB guidance for design evaluation.
直接替換替代品,適用於 A3P060-FG144 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: A3P060-FG144 (相同外形與佔位) — 差異在於 Package, Device Type, Logic Elements, Configuration Memory, Process Technology.
A3P060-FG144I
✅ 直接替換聯絡詢價
查看資料表 →A3P060-FGG144
✅ 直接替換聯絡詢價
查看資料表 →A3P060-FGG144I
✅ 直接替換📋 參考替代品(不在目錄中)
A3P060-1FGG144T
✅ 直接替換📋 參考替代品(不在目錄中)
A3P060-FGG144C
✅ 直接替換📋 參考替代品(不在目錄中)
A3P060-FG144 最大額定值與電氣特性
| Device Type | ProASIC3 field-programmable gate array |
| Logic Gates | 60,000 gates |
| Logic Elements | 700 logic elements |
| Logic Cells | 1,536 logic cells |
| Maximum Performance Frequency | 231 MHz |
| Block RAM | 18 Kb |
| User I/O Count | 96 I/O |
| Core Supply Voltage | 1.5 V |
| Process Technology | 130 nm CMOS |
| Configuration Memory | Flash-based nonvolatile configuration |
| 封裝 | 144-FPBGA, 13 x 13 mm |
| 安裝類型 | Surface mount |
| Commercial Junction Temperature | 0 °C to +85 °C |
| Shipping Format | Tray |
| Device Family | ProASIC3 |
| Programmability | User-programmable logic and I/O |
A3P060-FG144 144-fpbga, 13 x 13 mm 腳位配置指南
A3P060-FG144(144-fpbga, 13 x 13 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: A3P060-FG144.
請參閱 資料表 以查看完整腳位配置。
典型應用
A3P060-FG144 適用於 6 應用s: Compact Industrial Control Module, Test and Measurement Front End, Communication Interface Adapter, Embedded Data Acquisition, Programmable Logic Controller Platform, Low-Cost Custom I/O Controller.
Compact Industrial Control Module
The A3P060-FG144 fits compact industrial controllers that combine sequencing, status logic, and external interfaces in one programmable device. Its 96 I/O can connect digital sensors, actuator drivers, limit switches, and communication transceivers, while the 18 Kb of block RAM supports counters, queues, and short data buffers. The 231 MHz standard speed grade is appropriate for control paths operating below the device's maximum stated frequency. In a commercial-temperature enclosure, the A3P060 provides reprogrammable logic without a separate configuration memory. PCB planning should reserve clean routing for the 144-FPBGA grid and follow the manufacturer power and decoupling recommendations.
推薦
Test and Measurement Front End
The A3P060-FG144 can implement trigger logic, timing control, data capture, and interface management for a test-and-measurement front end. Sixty-seven logic-element blocks and 18 Kb of block RAM are sufficient for small acquisition pipelines and protocol state machines, while 96 I/O provide connections to sensors, ADC control lines, and status indicators. The 1.5 V core supply simplifies partitioning into low-voltage digital and higher-voltage interface domains. At up to 231 MHz, the standard FG grade should be selected only when post-route timing meets the required acquisition rate. Designers should use the official clock and pin tables to keep configuration, clock, and data paths free of unnecessary routing congestion.
推薦
Communication Interface Adapter
The A3P060-FG144 is suitable for protocol adapters that translate between a host interface and a dedicated external bus. Its 96 I/O support address, data, enable, interrupt, and handshake signals, while programmable logic can implement framing, filtering, byte alignment, and error checking. The 18 Kb block RAM can buffer short packets or maintain command and status queues without a separate external memory. The ProASIC3 flash configuration also allows the adapter to retain its logic after power removal. Layout should reserve the FPGA's 144-FPBGA escape routing and separate switching or transceiver return currents from sensitive configuration and clock inputs.
推薦
Embedded Data Acquisition
The A3P060-FG144 can act as the central logic device in a small embedded acquisition system that collects parallel sensor data and forwards it to a processor or memory. Its 96 I/O provide ample parallel connections, while 1,536 logic cells and 18 Kb of block RAM support channel multiplexing, trigger matrices, sampling counters, and short buffering operations. The 231 MHz maximum stated speed gives the design headroom for moderately parallel logic, although system timing must be evaluated after routing. The commercial junction range of 0 °C to +85 °C makes it appropriate for indoor equipment; extended environmental exposure calls for the industrial-temperature ordering option.
推薦
Programmable Logic Controller Platform
The A3P060-FG144 suits small PLC and machine-control platforms where logic must be updated without changing the PCB. Its reprogrammable ProASIC3 architecture supports deterministic sequencing, interlocks, edge detection, counters, and modular I/O mapping within 700 logic elements and 1,536 logic cells. The 96 user I/O allow direct connection to field sensors and actuators, reducing the number of surrounding discrete interface components. Flash-based configuration retains the control program through power cycles, while the 144-FPBGA keeps the digital core compact. Verify timing closure and I/O drive requirements against the specific machine, and use the manufacturer pin tables for every externally accessible signal.
推薦
Low-Cost Custom I/O Controller
The A3P060-FG144 is useful when a product requires programmable I/O behavior but not a large processor subsystem. Its 96 I/O can operate as configurable status inputs, relay-control outputs, indicators, and interface handshakes, while 18 Kb of block RAM supports debounce counters, history buffers, and communication frames. The 60,000-gate ProASIC3 implementation provides a compact single-chip solution with low total ownership cost. The commercial FG grade is appropriate where the junction temperature remains within 0 °C to +85 °C. During board design, account for the fine-pitch 144-FPBGA escape pattern and place decoupling and configuration-interface components according to the manufacturer's reference guidance.
推薦
推薦產品摘要
工程參考資料,適用於 A3P060-FG144 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | A3P060-FG144I | A3P060-FGG144 | A3P060-FGG144I | A3P060-1FGG144T | A3P060-FGG144C |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 144-FPBGA, 13 x 13 mm | 144-FPBGA, 13 x 13 mm | 144-FPBGA, 13 x 13 mm | 144-FPBGA, 13 x 13 mm | 144-FPBGA, 13 x 13 mm | 144-FPBGA, 13 x 13 mm |
| Device Family | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 |
主要差異化特點
- Standard 231 MHz speed grade with commercial-temperature specification (對比A3P060-FGG144)
- Direct commercial-to-industrial footprint migration (對比A3P060-FG144I)
- Established 144-FPBGA package with 96 user I/O (對比A3P060-1FGG144T)
設計說明
The 144-FPBGA uses a fine-pitch ball grid in a 13 x 13 mm package, so inner-row escape routing must be planned before schematic sign-off. Follow the Microchip package drawing and pin-description table for ball locations, power, ground, configuration, and user-I/O assignments. Do not infer pad coordinates from a generic BGA library; the 13 x 13 mm outline and its ball map determine whether a component footprint matches the released design.
Implement the 1.5 V core rail with the decoupling network and power distribution arrangement recommended in the ProASIC3 family documentation. Place the closest high-frequency capacitors directly at the relevant supply and ground balls, then provide bulk capacitance near the regulator. Keep high-current switching returns and external transceiver supplies away from configuration and clock inputs so that supply transients do not disturb the device's nonvolatile configuration interface.
Do not interchange ordering suffixes without checking the required speed and temperature grades. A3P060-FG144 is the standard 231 MHz commercial version, while FGG144 variants use the G speed designation and the I suffix identifies industrial temperature. Confirm the exact suffix, packing format, operating-temperature requirement, and timing constraints before releasing a production BOM or approving a substitute on an existing PCB.
Route clock inputs and configuration signals as short, continuous paths with reference-plane continuity and avoid stubs created by unnecessary test pads. Because the ProASIC3 configuration is retained in flash, configuration pins remain sensitive to unintended noise during power transitions. Apply the manufacturer's guidance for unused pins, external pull components, and configuration-interface implementation rather than applying generic pull-up or pull-down assumptions across all balls.
合規資訊
Compliance statements were not identified in the referenced manufacturer and distributor pages. Use the manufacturer's current material-compliance declaration for the exact A3P060-FG144 ordering code before production release.