Microchip Technology

A3P060-FG144 - 60K Gate ProASIC3 FPGA | Microchip

Артикул: A3P060-FG144 ✓ Активен
1.5 V Vdss 144-FPBGA, 13 x 13 mm Package 231 MHz Speed Flash-based nonvolatile configuration Memory
MOQ: 1 |

A3P060-FG144 Обзор

The Microchip Technology A3P060-FG144 is a ProASIC3 field-programmable gate array with 60,000 logic gates, 700 logic elements, 18 Kb of block RAM, and up to 96 user I/O in a 144-FPBGA package. The commercial-temperature device operates from a 1.5 V core supply and is built on 130 nm CMOS technology.

An FPGA is a programmable semiconductor whose digital logic blocks, interconnect, and I/O can be configured after manufacture. The A3P060 belongs to the ProASIC3 family, which combines flash-based nonvolatile configuration with low-power operation, small-footprint packaging, and reprogrammability. It is intended for compact control, interface, data-capture, and embedded-processing designs that require a short path between a defined logic architecture and a finished PCB.

Key device attributes include a maximum stated performance of 231 MHz, 1,536 logic cells across 96 logic-element blocks, 18 Kb of block RAM, and 96 I/O. The 144-FPBGA package measures 13 x 13 mm and is offered in a tray configuration for the identified commercial part. Its 130 nm process supports integration within a relatively compact board area while maintaining a low-cost design entry point.

The ProASIC3 architecture separates programmable logic from fixed peripheral functions, allowing designers to implement control logic, counters, state machines, bus controllers, and data paths in one device. Flash-based configuration means the logic image is retained in the device, eliminating the need for a separate configuration PROM when the system does not require runtime reconfiguration.

Typical uses include industrial control modules, test and measurement front ends, communications adapters, embedded instrumentation, and compact consumer or automotive-adjacent products. The 96 I/O count supports external memory interfaces, communication transceivers, status indicators, and sensor conditioning front ends while retaining a small package footprint.

Designers should confirm the board footprint, ball assignment, voltage rails, clock requirements, and configuration interface against the manufacturer documentation before layout release. The FG144 package requires careful via-in-pad and escape-routing planning because its fine-pitch ball grid constrains access to inner rows.

This page combines the manufacturer's A3P060 family information with distributor package, capacity, temperature, and sourcing details, then adds same-footprint speed and temperature alternatives, comparison parameters, and practical PCB guidance for design evaluation.

Аналоги без доработки для A3P060-FG144 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с A3P060-FG144 (тот же форм-фактор и посадочное место) — отличается по Package, Device Type, Logic Elements, Configuration Memory, Process Technology.

Microchip Technology
Package: 144-LBGA, 13 x 13 mm
Device Type: ProASIC3 flash FPGA
Configuration Memory: Flash
Сравнить с A3P060-FG144 →
Microchip Technology
Package: 144-LBGA, 13 mm x 13 mm
Device Type: ProASIC3 Flash Field-Programmable Gate Array
Logic Elements: 700 LEs
Сравнить с A3P060-FG144 →
Microchip Technology
Package: 144-ball low-profile grid array
Device Type: ProASIC3 flash field-programmable gate array
Logic Elements: 700 LE
Сравнить с A3P060-FG144 →

A3P060-FG144I

✅ Прямая замена
Microchip Technology
📦 144-FPBGA, 13 x 13 mm
ProASIC3 Flash Field-Programmable Gate Array · 60,000 gates · 1,536 CLBs · 700 LEs · 96 I/Os · 18 Kb · 1.5 V · 130 nm CMOS

Уточнить цену

Открыть даташит →

A3P060-FGG144

✅ Прямая замена
Microchip Technology
📦 144-FPBGA, 13 x 13 mm
ProASIC3 flash field-programmable gate array · 700 LE · 1536 CLB · 60000 gates · 96 I/O · 231 MHz · 1.5 V · 130 nm CMOS

Уточнить цену

Открыть даташит →

A3P060-FGG144I

✅ Прямая замена
📦 144-FPBGA, 13 x 13 mm
G speed designation and industrial-temperature grade; same A3P060 architecture, 96 I/O, and 144-FPBGA footprint

📋 Справочный аналог (нет в каталоге)

A3P060-1FGG144T

✅ Прямая замена
📦 144-FPBGA, 13 x 13 mm
Speed designation differs from the standard FG grade and T denotes tape-and-reel packing; same 144-FPBGA footprint

📋 Справочный аналог (нет в каталоге)

A3P060-FGG144C

✅ Прямая замена
📦 144-FPBGA, 13 x 13 mm
G speed and commercial-temperature designation versus the standard FG grade; same ProASIC3 family and 144-FPBGA footprint

📋 Справочный аналог (нет в каталоге)

A3P060-FG144 Максимальные параметры и электрические характеристики

Device Type ProASIC3 field-programmable gate array
Logic Gates 60,000 gates
Logic Elements 700 logic elements
Logic Cells 1,536 logic cells
Maximum Performance Frequency 231 MHz
Block RAM 18 Kb
User I/O Count 96 I/O
Core Supply Voltage 1.5 V
Process Technology 130 nm CMOS
Configuration Memory Flash-based nonvolatile configuration
Корпус 144-FPBGA, 13 x 13 mm
Тип монтажа Surface mount
Commercial Junction Temperature 0 °C to +85 °C
Shipping Format Tray
Device Family ProASIC3
Programmability User-programmable logic and I/O

Руководство по цоколевке A3P060-FG144 в корпусе 144-fpbga, 13 x 13 mm

Цоколевка для A3P060-FG144 (корпус 144-fpbga, 13 x 13 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 144-fpbga, 13 x 13 mm для A3P060-FG144

Нет подробных данных о распиновке для A3P060-FG144.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

A3P060-FG144 подходит для 6 применениеs: Compact Industrial Control Module, Test and Measurement Front End, Communication Interface Adapter, Embedded Data Acquisition, Programmable Logic Controller Platform, Low-Cost Custom I/O Controller.

🏭

Compact Industrial Control Module

The A3P060-FG144 fits compact industrial controllers that combine sequencing, status logic, and external interfaces in one programmable device. Its 96 I/O can connect digital sensors, actuator drivers, limit switches, and communication transceivers, while the 18 Kb of block RAM supports counters, queues, and short data buffers. The 231 MHz standard speed grade is appropriate for control paths operating below the device's maximum stated frequency. In a commercial-temperature enclosure, the A3P060 provides reprogrammable logic without a separate configuration memory. PCB planning should reserve clean routing for the 144-FPBGA grid and follow the manufacturer power and decoupling recommendations.

📡

Test and Measurement Front End

The A3P060-FG144 can implement trigger logic, timing control, data capture, and interface management for a test-and-measurement front end. Sixty-seven logic-element blocks and 18 Kb of block RAM are sufficient for small acquisition pipelines and protocol state machines, while 96 I/O provide connections to sensors, ADC control lines, and status indicators. The 1.5 V core supply simplifies partitioning into low-voltage digital and higher-voltage interface domains. At up to 231 MHz, the standard FG grade should be selected only when post-route timing meets the required acquisition rate. Designers should use the official clock and pin tables to keep configuration, clock, and data paths free of unnecessary routing congestion.

🌐

Communication Interface Adapter

The A3P060-FG144 is suitable for protocol adapters that translate between a host interface and a dedicated external bus. Its 96 I/O support address, data, enable, interrupt, and handshake signals, while programmable logic can implement framing, filtering, byte alignment, and error checking. The 18 Kb block RAM can buffer short packets or maintain command and status queues without a separate external memory. The ProASIC3 flash configuration also allows the adapter to retain its logic after power removal. Layout should reserve the FPGA's 144-FPBGA escape routing and separate switching or transceiver return currents from sensitive configuration and clock inputs.

🖥️

Embedded Data Acquisition

The A3P060-FG144 can act as the central logic device in a small embedded acquisition system that collects parallel sensor data and forwards it to a processor or memory. Its 96 I/O provide ample parallel connections, while 1,536 logic cells and 18 Kb of block RAM support channel multiplexing, trigger matrices, sampling counters, and short buffering operations. The 231 MHz maximum stated speed gives the design headroom for moderately parallel logic, although system timing must be evaluated after routing. The commercial junction range of 0 °C to +85 °C makes it appropriate for indoor equipment; extended environmental exposure calls for the industrial-temperature ordering option.

🏗️

Programmable Logic Controller Platform

The A3P060-FG144 suits small PLC and machine-control platforms where logic must be updated without changing the PCB. Its reprogrammable ProASIC3 architecture supports deterministic sequencing, interlocks, edge detection, counters, and modular I/O mapping within 700 logic elements and 1,536 logic cells. The 96 user I/O allow direct connection to field sensors and actuators, reducing the number of surrounding discrete interface components. Flash-based configuration retains the control program through power cycles, while the 144-FPBGA keeps the digital core compact. Verify timing closure and I/O drive requirements against the specific machine, and use the manufacturer pin tables for every externally accessible signal.

🔧

Low-Cost Custom I/O Controller

The A3P060-FG144 is useful when a product requires programmable I/O behavior but not a large processor subsystem. Its 96 I/O can operate as configurable status inputs, relay-control outputs, indicators, and interface handshakes, while 18 Kb of block RAM supports debounce counters, history buffers, and communication frames. The 60,000-gate ProASIC3 implementation provides a compact single-chip solution with low total ownership cost. The commercial FG grade is appropriate where the junction temperature remains within 0 °C to +85 °C. During board design, account for the fine-pitch 144-FPBGA escape pattern and place decoupling and configuration-interface components according to the manufacturer's reference guidance.

Сводка рекомендуемых товаров

A3P060-FG144I Microchip Technology Используется в: Compact Industrial Control Module, Test and Measurement Front End, Embedded Data Acquisition, Programmable Logic Controller Platform, Low-Cost Custom I/O Controller A3P060-FGG144 Microchip Technology Используется в: Compact Industrial Control Module, Test and Measurement Front End, Programmable Logic Controller Platform A3P060-FGG144I Same-footprint speed and temperature variant Используется в: Communication Interface Adapter A3P060-FGG144C Same-footprint commercial-grade speed variant Используется в: Communication Interface Adapter, Low-Cost Custom I/O Controller A3P060-1FGG144T Production-packing alternative with a different speed designation Используется в: Embedded Data Acquisition
What are the key specifications of A3P060-FG144 that engineers should know?
The A3P060-FG144 is a 60,000-gate ProASIC3 FPGA with 700 logic elements, 1,536 logic cells, 18 Kb of block RAM, and 96 user I/O. It operates from a 1.5 V core supply, uses 130 nm CMOS technology, and is packaged in a 13 x 13 mm 144-FPBGA. Manufacturer and distributor listings identify the commercial junction-temperature version as reaching 231 MHz.
What is the operating voltage of A3P060-FG144?
The A3P060-FG144 uses a 1.5 V core supply, as stated in the Microchip A3P060 family specifications and reflected in the device listing. Peripheral I/O voltage requirements, configuration-interface levels, and supported banks must be checked in the manufacturer datasheet before defining the board power tree. The 1.5 V figure describes the core rather than every I/O signaling level.
Where can I download the A3P060-FG144 datasheet PDF?
The official A3P060 product page at microchip.com provides the manufacturer documentation for the ProASIC3 device family, including the relevant data sheet and supporting design resources. Use the A3P060-FG144 ordering code to confirm package, speed, and temperature options. The A3P060-FG144I PDF also documents the closely related industrial-temperature variant, but the ordering suffixes must not be mixed when releasing production BOMs.
Where can I find the A3P060-FG144 pinout and ball assignment?
The A3P060-FG144 pin assignment is defined by the Microchip ProASIC3 family data sheet and package drawings for the 144-FPBGA option. Assign PCB nets from those official tables rather than from a generic BGA drawing, because the 13 x 13 mm package has 144 balls and may use different power, ground, configuration, and user-I/O assignments. The pin-description table is the authoritative source for ball names.
How much logic and memory does A3P060-FG144 provide?
The A3P060-FG144 provides 60,000 gates, 700 logic elements, 1,536 logic cells, and 18 Kb of block RAM according to Microchip family information and distributor technical summaries. These resources support state machines, bus controllers, counters, modest data pipelines, and embedded control functions. Final utilization depends on routing, clocking, memory inference, and the selected ProASIC3 architecture.
Is A3P060-FG144 the same as A3P060-FGG144?
The A3P060-FG144 and A3P060-FGG144 are closely related ProASIC3 devices in the same 144-FPBGA footprint, but their ordering codes encode different speed grades. The A3P060-FG144 is the standard 231 MHz version identified in the target listing, while A3P060-FGG144 uses the G speed designation. Confirm timing, temperature, and ordering details in the family data sheet before treating them as interchangeable.
What is the difference between A3P060-FG144 and A3P060-FG144I?
The primary documented distinction is temperature grade: A3P060-FG144 is the commercial-temperature version, and A3P060-FG144I is the industrial-temperature variant. Both use the ProASIC3 A3P060 device and the same 144-FPBGA package family, allowing a common PCB footprint. The I suffix changes qualification requirements rather than the fundamental logic capacity, so final sourcing must match the enclosure's temperature range.
When should I choose A3P060-FG144 instead of A3P060-FGG144?
Choose A3P060-FG144 when the 231 MHz standard speed grade is sufficient and the design operates within the commercial temperature range. Choose A3P060-FGG144 when the higher G speed grade provides useful timing margin for a clock-critical design. Both share the A3P060 architecture and 144-FPBGA footprint, so the decision should be based on verified timing requirements rather than PCB compatibility alone.
Is A3P060-FG144 suitable for industrial control applications?
The A3P060-FG144 is suitable for commercial-temperature industrial control equipment when its specified 0 °C to +85 °C junction range remains within the product's environmental limits. For wider ambient operation, select A3P060-FG144I and verify the complete system thermal budget. The FPGA's 96 I/O, 18 Kb block RAM, and reprogrammability suit compact controllers and configurable I/O modules.
What can replace A3P060-FG144 on the same PCB footprint?
The closest same-footprint alternatives include A3P060-FG144I, A3P060-FGG144, and A3P060-FGG144I, all from the Microchip ProASIC3 family and identified in 144-FPBGA options. A3P060-1FGG144T adds a different speed designation and is supplied in a tape-and-reel format. Validate speed, temperature, configuration, timing, and sourcing requirements before treating any option as a production drop-in replacement.
What is the best drop-in replacement for A3P060-FG144?
A3P060-FG144I is the most direct same-footprint candidate because it retains the A3P060 ProASIC3 architecture and 144-FPBGA package while changing the temperature grade. A3P060-FGG144 is another package-compatible option with a different speed designation. Neither substitution is automatic: confirm the pinout, I/O standards, timing class, operating-temperature requirement, and ordering suffix in the manufacturer documentation.
Where can I buy A3P060-FG144 online?
Use the Request a Quote form on this page to request A3P060-FG144 availability, volume pricing, and delivery from XAIPART. The part is listed by authorized distribution channels under the exact ordering code A3P060-FG144, so include that code in your request. Do not substitute A3P060-FGG144 or A3P060-FG144I without confirming the required speed and temperature grade.
What is the price of A3P060-FG144?
Submit the A3P060-FG144 quantity and target date through the Request a Quote form on this page for current pricing. FPGA pricing can change with volume, configuration, and market conditions, so static price figures are not reproduced in the technical content. Provide the 144-FPBGA ordering code and required commercial-temperature specification when requesting the quotation.
What is the lead time and stock status for A3P060-FG144?
Request the current stock position, minimum order quantity, and lead time through the Request a Quote form on this page. Availability for the exact 144-FPBGA ordering code should be confirmed because related ProASIC3 suffixes use different speed, temperature, and packing configurations. Providing a forecast consumption profile helps the distributor response reflect the intended production schedule.
Is there a non-Microchip drop-in equivalent for A3P060-FG144?
No verified cross-manufacturer drop-in equivalent is established for the A3P060-FG144. Its flash-based ProASIC3 configuration, 144-FPBGA ball assignment, timing characteristics, and 96-I/O arrangement make a generic FPGA substitution risky. The documented same-footprint candidates are Microchip family members. A cross-brand migration would require a new pinout, timing, toolchain, and board-validation effort rather than a simple replacement.

Справочные инженерные данные для A3P060-FG144 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose A3P060-FG144 for commercial-temperature designs in which 231 MHz is sufficient and the 144-FPBGA footprint is already designed. Select A3P060-FG144I when the enclosure requires the industrial-temperature grade but no different speed class is needed. Consider A3P060-FGG144 or A3P060-FGG144I when a higher G speed designation provides useful timing margin, after confirming that the specific device satisfies the required clock rate. A3P060-1FGG144T is relevant when production packing and a distinct speed designation align with the BOM strategy. All listed candidates are Microchip ProASIC3 options in the same package family, so package compatibility is not the deciding factor. Temperature, speed, configuration, timing closure, and lifecycle requirements should determine the final selection. No cross-manufacturer drop-in equivalent is established because configuration architecture, pin behavior, and software support differ significantly.

Сравнение с аналогами

Параметр Этот товар A3P060-FG144I A3P060-FGG144 A3P060-FGG144I A3P060-1FGG144T A3P060-FGG144C
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 144-FPBGA, 13 x 13 mm 144-FPBGA, 13 x 13 mm 144-FPBGA, 13 x 13 mm 144-FPBGA, 13 x 13 mm 144-FPBGA, 13 x 13 mm 144-FPBGA, 13 x 13 mm
Device Family ProASIC3 ProASIC3 ProASIC3 ProASIC3 ProASIC3 ProASIC3

Ключевые отличия

  • Standard 231 MHz speed grade with commercial-temperature specification (против A3P060-FGG144)
  • Direct commercial-to-industrial footprint migration (против A3P060-FG144I)
  • Established 144-FPBGA package with 96 user I/O (против A3P060-1FGG144T)

Заметки по проектированию

The 144-FPBGA uses a fine-pitch ball grid in a 13 x 13 mm package, so inner-row escape routing must be planned before schematic sign-off. Follow the Microchip package drawing and pin-description table for ball locations, power, ground, configuration, and user-I/O assignments. Do not infer pad coordinates from a generic BGA library; the 13 x 13 mm outline and its ball map determine whether a component footprint matches the released design.

Implement the 1.5 V core rail with the decoupling network and power distribution arrangement recommended in the ProASIC3 family documentation. Place the closest high-frequency capacitors directly at the relevant supply and ground balls, then provide bulk capacitance near the regulator. Keep high-current switching returns and external transceiver supplies away from configuration and clock inputs so that supply transients do not disturb the device's nonvolatile configuration interface.

Do not interchange ordering suffixes without checking the required speed and temperature grades. A3P060-FG144 is the standard 231 MHz commercial version, while FGG144 variants use the G speed designation and the I suffix identifies industrial temperature. Confirm the exact suffix, packing format, operating-temperature requirement, and timing constraints before releasing a production BOM or approving a substitute on an existing PCB.

Route clock inputs and configuration signals as short, continuous paths with reference-plane continuity and avoid stubs created by unnecessary test pads. Because the ProASIC3 configuration is retained in flash, configuration pins remain sensitive to unintended noise during power transitions. Apply the manufacturer's guidance for unused pins, external pull components, and configuration-interface implementation rather than applying generic pull-up or pull-down assumptions across all balls.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

Compliance statements were not identified in the referenced manufacturer and distributor pages. Use the manufacturer's current material-compliance declaration for the exact A3P060-FG144 ordering code before production release.

Данные проверены: 2026-11-08 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

a3p060 fgg144i a3p060 vqg100 datasheet a3p060 tqg144i a3p060 datasheet actel a3p060 proasic3 a3p060 A3P060-FG144 datasheet A3P060-FG144 pinout A3P060-FG144 vs A3P060-FGG144 A3P060-FG144 drop-in replacement A3P060-FG144 price A3P060-FG144 stock Microchip A3P060-FG144 A3P060-FG144 144-FPBGA pinout A3P060-FG144 application circuit

Связанные компоненты & термины

Microchip Technology Microsemi Actel A3P060-FG144 A3P060-FG144I A3P060-FGG144 A3P060-FGG144I A3P060-1FGG144T A3P060-FGG144C ProASIC3 FPGA field-programmable gate array logic element block RAM flash-based configuration 144-FPBGA BGA surface-mount package 130 nm CMOS 1.5 V core supply 231 MHz 96 user I/O industrial control programmable logic controller
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ