A3P060-VQ100I - 60K Gate Flash FPGA | Microchip Technology
部品番号: A3P060-VQ100I ✓ 生産中A3P060-VQ100I 概要
A field-programmable gate array is a semiconductor whose logic functions are configured after manufacture. Within the product hierarchy, the A3P060-VQ100I is an FPGA, a programmable-logic IC, and a member of Microchip's ProASIC3 flash FPGA family. Flash-based configuration retains the programmed logic without continuous static RAM power, supporting an Instant On operating model for embedded control, communications, and industrial systems.
The device provides 18 Kbit of block RAM according to the ProASIC3 family documentation, 1,536 logic cells or logic blocks, and up to 71 user I/Os. Its 130 nm CMOS process uses a seven-layer metal structure with six copper layers. The VQFP-100 package has a 0.50 mm pitch and a stated height of 1 mm, supporting compact board layouts without a fine-pitch BGA footprint.
ProASIC3 architecture allows the logic design to be reprogrammed rather than permanently patterned as a custom ASIC. This shortens development cycles for design revisions, prototype correction, and production configuration changes. The A3P060-VQ100I designation identifies the 60K-gate device in a 100-pin VQFP package, with the listed automotive-oriented ordering option and a nominal 350 MHz internal frequency for the base A3P060-VQ100 family.
Typical uses include industrial control logic, network-interface front ends, instrument signal conditioning, programmable test equipment, and compact embedded gateways. The combination of 71 I/Os, embedded block RAM, and nonvolatile configuration is especially useful when a design needs moderate logic density, flexible I/O allocation, and field updates without replacing the board.
PCB design should preserve the manufacturer's recommended 0.50 mm VQFP land pattern, provide clean return paths beneath the device, and validate high-speed clock and I/O routing with the appropriate ProASIC3 timing constraints. Decoupling and configuration-access circuitry must also follow the family-level guidance in the manufacturer datasheet.
This page combines the exact orderable MPN, family-level architecture data, practical PCB guidance, and a compatibility-focused comparison with same-package ProASIC3 options. It is intended to help engineers confirm package fit, logic resources, memory availability, and design-tool requirements before committing a ProASIC3 board to production.
ドロップイン代替品: A3P060-VQ100I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: A3P060-VQ100I (同一形状・フットプリント) — 相違点: Configuration Memory, Package Type, Mounting Type, Configuration Technology, Family.
A3P060-1VQ100T
✅ ドロップイン価格はお問い合わせください
データシートを見る →A3P060-2VQ100I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
A3P060-1VQG100T
✅ ドロップイン価格はお問い合わせください
データシートを見る →A3P060-VQG100I
✅ ドロップイン✓ 在庫あり
$6.95 / 個
データシートを見る →A3P060-VQ100T
✅ ドロップイン価格はお問い合わせください
データシートを見る →A3P060-VQ100I 最大定格&電気的特性
| Product Type | ProASIC3 flash field-programmable gate array |
| System Gates | 60,000 gates |
| Logic Cells | 1,536 cells |
| Logic Blocks | 1,536 blocks |
| User I/O Count | 71 I/Os |
| Block RAM | 18 Kbit |
| Internal Frequency | 350 MHz |
| Core Voltage | 1.5 V |
| Process Technology | 130 nm CMOS |
| Metal Stack | 7-layer metal, including 6 copper layers |
| Configuration Memory | Nonvolatile flash |
| パッケージ | 100-pin VQFP, 14 x 14 mm |
| Package Height | 1 mm |
| Lead Pitch | 0.50 mm |
| 実装タイプ | Surface mount |
| Logic Family | CMOS |
| Optional Soft ARM Support | Supported by the ProASIC3 flash FPGA family |
A3P060-VQ100I 1 mm ピン配置ガイド
A3P060-VQ100I (1 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: A3P060-VQ100I.
詳細は データシート をご参照ください。
主な用途
A3P060-VQ100I の用途: 6 件s: Industrial Control Logic, Network Interface Front End, Programmable Test Equipment, Instrument Signal Conditioning, Embedded Gateway and Sensor Hub, Programmable Communication Adapter.
Industrial Control Logic
The A3P060-VQ100I fits compact industrial controllers that combine deterministic control logic with field-updatable configuration. Its 60,000 system gates and 1,536 logic cells can support control, sequencing, and interface logic, while 71 user I/Os provide connections to sensors, actuators, and field-bus transceivers. The nonvolatile flash configuration supports Instant On behavior and permits design updates without replacing the device. Engineers should use the ProASIC3 timing constraints for the 350 MHz internal performance target and validate every external I/O against the selected speed and temperature grade.
おすすめ
Network Interface Front End
The A3P060-VQ100I is suitable for protocol handling, packet preprocessing, and interface adaptation in embedded network equipment. Its 71 I/Os can support multiple data buses and control signals, while 18 Kbit of block RAM provides limited on-chip buffering for framing, counters, or dual-port data paths. Unlike a soft processor-only implementation, the programmable logic can execute parallel word-level operations and protocol state machines concurrently. Board-level validation must account for 1.5 V core power, flash configuration access, and signal timing under the selected device grade.
おすすめ
Programmable Test Equipment
The A3P060-VQ100I can implement adaptable sequencing, pattern generation, and acquisition-control logic for compact test and measurement systems. Its 1,536 logic cells and 71 I/Os are useful for coordinating instruments, switching control signals, and executing time-based test sequences. Nonvolatile configuration makes it practical to store multiple test personalities or update hardware behavior in the field. The implementation should reserve configuration pins and programming access, follow the manufacturer's decoupling layout, and verify external timing rather than treating the 350 MHz internal figure as an I/O-rate guarantee.
おすすめ
Instrument Signal Conditioning
The A3P060-VQ100I can implement digital filtering, sensor-path compensation, calibration tables, and control sequencing around precision converters. Its parallel FPGA architecture is useful when the design must combine multiple data streams or perform deterministic sampling-control functions. With up to 71 I/Os and 18 Kbit of block RAM, the device can support moderate acquisition pipelines and embedded control functions without relying entirely on a microcontroller. Designers should establish clock-domain boundaries, constrain interface paths, and verify I/O voltage compatibility with every external component.
おすすめ
Embedded Gateway and Sensor Hub
The A3P060-VQ100I suits gateway hardware that must translate between sensors, communication links, and local control logic. Its 71 I/Os can accommodate digital sensors, status indicators, and communication peripherals, while the nonvolatile flash configuration supports rapid boot and field updates. Parallel logic can implement filtering, packet checks, or timing conversion alongside a microcontroller. The system design should provide a robust configuration path, verify 1.5 V supply sequencing, and isolate noisy switching or communication circuits to limit coupling into sensitive FPGA inputs.
おすすめ
Programmable Communication Adapter
The A3P060-VQ100I can serve as the protocol engine in compact communication adapters requiring flexible logic and nonvolatile configuration. The available logic can implement framing, filtering, address decoding, and low-level timing assistance, while 71 I/Os permit several parallel or serial interfaces. The 130 nm CMOS device is manufactured in a mature ProASIC3 process with a 100-pin VQFP footprint, simplifying hand assembly and inspection compared with a very fine-pitch BGA. Production designs must verify transceiver voltage levels, clock quality, configuration pins, and timing margins for the selected speed suffix.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: A3P060-VQ100I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | A3P060-1VQ100 | A3P060-2VQ100I | A3P060-1VQG100T | A3P060-VQG100I | A3P060-VQ100T |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-pin VQFP (14 x 14 mm) | 100-pin VQFP (14 x 14 mm) | 100-pin VQFP (14 x 14 mm) | 100-pin VQFP (14 x 14 mm) | 100-pin VQFP (14 x 14 mm) | 100-pin VQFP (14 x 14 mm) |
| FPGA Family | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 |
| System Gates | 60,000 gates | 60,000 gates | 60,000 gates | 60,000 gates | 60,000 gates | 60,000 gates |
| Logic Cells | 1,536 cells | 1,536 cells | 1,536 cells | 1,536 cells | 1,536 cells | 1,536 cells |
| Process Technology | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS |
| Core Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
| Block RAM | 18 Kbit | 18 Kbit | 18 Kbit | 18 Kbit | 18 Kbit | 18 Kbit |
主な差別化要因
- Maintains the complete ProASIC3 resource set while offering same-package ordering options (vs A3P060-1VQ100)
- Uses the same 100-pin VQFP footprint and 130 nm ProASIC3 implementation (vs A3P060-2VQ100I)
- Avoids a package redesign for typical ProASIC3 speed or ordering changes (vs A3P060-1VQG100T)
- Provides a pin-compatible path within the established A3P060 design ecosystem (vs A3P060-VQG100I)
設計ノート
Implement the manufacturer's 100-pin VQFP land pattern with a 0.50 mm lead pitch and a 14 x 14 mm body envelope. Place the device according to the package drawing, maintain solder-mask and paste compatibility for fine-pitch leads, and avoid placing tall components where they can interfere with the 1 mm package height. Verify courtyard, assembly clearance, and footprint geometry against the current Microchip package drawing before releasing the PCB.
Separate the 1.5 V core rail from external I/O supplies and follow the ProASIC3 family's recommended power topology and decoupling arrangement. Place the smallest high-frequency bypass capacitor closest to the appropriate supply and ground pins, then add bulk capacitance near the regulator. Check every external I/O's voltage domain against the device's supported levels; do not infer I/O compatibility solely from the 1.5 V core requirement.
Use continuous ground-plane reference beneath the FPGA and constrain all clock, JTAG, configuration, and high-speed I/O paths in the timing tool. Keep clocks away from switching-power stages and noisy interface routing, and provide dedicated return paths for high-speed nets. Although the family is described at 350 MHz internally, actual interface performance depends on I/O standards, external memory or transceiver timing, board topology, and the selected speed grade.
Do not substitute an A3P060 family member solely because the gate count and VQFP-100 outline match. Verify the speed suffix, temperature option, qualification status, configuration interface, pin functions, and timing limits in the manufacturer ordering information. Also confirm the exact package code because catalog records use VQFP, TQFP, and PQFP terminology for the same general 100-pin family format.
コンプライアンス情報
The available product records identify the target ordering option and family construction but do not provide extractable RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. Confirm these attributes with the manufacturer or the current product documentation.