Microchip Technology

A3P060-VQ100I - 60K Gate Flash FPGA | Microchip Technology

MPN: A3P060-VQ100I ✓ Active
1.5 V Vdss 100-pin VQFP, 14 x 14 mm Package 350 MHz Speed Nonvolatile flash Memory
MOQ: 1 |

A3P060-VQ100I Overview

The Microchip Technology A3P060-VQ100I is a ProASIC3 flash field-programmable gate array with 60,000 system gates, 1,536 logic cells, up to 71 user I/Os, and a 100-pin VQFP package measuring 14 x 14 mm. It combines reprogrammable nonvolatile configuration memory with 350 MHz internal performance and 1.5 V core operation.

A field-programmable gate array is a semiconductor whose logic functions are configured after manufacture. Within the product hierarchy, the A3P060-VQ100I is an FPGA, a programmable-logic IC, and a member of Microchip's ProASIC3 flash FPGA family. Flash-based configuration retains the programmed logic without continuous static RAM power, supporting an Instant On operating model for embedded control, communications, and industrial systems.

The device provides 18 Kbit of block RAM according to the ProASIC3 family documentation, 1,536 logic cells or logic blocks, and up to 71 user I/Os. Its 130 nm CMOS process uses a seven-layer metal structure with six copper layers. The VQFP-100 package has a 0.50 mm pitch and a stated height of 1 mm, supporting compact board layouts without a fine-pitch BGA footprint.

ProASIC3 architecture allows the logic design to be reprogrammed rather than permanently patterned as a custom ASIC. This shortens development cycles for design revisions, prototype correction, and production configuration changes. The A3P060-VQ100I designation identifies the 60K-gate device in a 100-pin VQFP package, with the listed automotive-oriented ordering option and a nominal 350 MHz internal frequency for the base A3P060-VQ100 family.

Typical uses include industrial control logic, network-interface front ends, instrument signal conditioning, programmable test equipment, and compact embedded gateways. The combination of 71 I/Os, embedded block RAM, and nonvolatile configuration is especially useful when a design needs moderate logic density, flexible I/O allocation, and field updates without replacing the board.

PCB design should preserve the manufacturer's recommended 0.50 mm VQFP land pattern, provide clean return paths beneath the device, and validate high-speed clock and I/O routing with the appropriate ProASIC3 timing constraints. Decoupling and configuration-access circuitry must also follow the family-level guidance in the manufacturer datasheet.

This page combines the exact orderable MPN, family-level architecture data, practical PCB guidance, and a compatibility-focused comparison with same-package ProASIC3 options. It is intended to help engineers confirm package fit, logic resources, memory availability, and design-tool requirements before committing a ProASIC3 board to production.

Drop-in alternatives for A3P060-VQ100I — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with A3P060-VQ100I (same form factor and footprint) — differing in Configuration Memory, Package Type, Mounting Type, Configuration Technology, Family.

Microchip Technology
Configuration Memory: 18,432 bits
Package Type: VQFP-100
Mounting Type: Surface-mount technology (SMT)
Compare with A3P060-VQ100I →
Microchip Technology
Family: ProASIC3
Compare with A3P060-VQ100I →
Microchip Technology
Configuration Memory: On-chip flash (non-volatile, single chip)
Package Type: 100-TQFP / VQFP-100, 0.5 mm pitch, green
Family: ProASIC3 (Microsemi/Microchip)
Compare with A3P060-VQ100I →
Microchip Technology
Package Type: 100-TQFP / VQFP-100
Configuration Technology: Flash-based, reprogrammable
Compare with A3P060-VQ100I →

A3P060-1VQ100T

✅ Drop-In
Microchip Technology
📦 100-pin VQFP (14 x 14 mm)
ProASIC3 · 1536 · 18432 · 71 · 60000 · 1.425V to 1.575V · Surface Mount · 100-VQFP (14x14)

Contact for price

View Datasheet →

A3P060-2VQ100I

✅ Drop-In
📦 100-pin VQFP (14 x 14 mm)
Same 60,000-gate, 1,536-cell, 100-pin VQFP structure; the -2 suffix denotes a different speed option.

📋 Reference alternative (not in catalog)

A3P060-1VQG100T

✅ Drop-In
Microchip Technology
📦 100-pin VQFP (14 x 14 mm)
60000 · 1536 · 71 · 350 MHz · 1.5 V · -1 (standard) · CMOS (flash switch) · On-chip flash (non-volatile, single chip)

Contact for price

View Datasheet →

A3P060-VQG100I

✅ Drop-In
Microchip Technology
📦 100-pin VQFP (14 x 14 mm)
ProASIC3 · ProASIC3 · 60K Gates · 700 LEs · 71 · 18,432 bits · 231 MHz · 130 nm

✓ In Stock

$6.95 / Unit

View Datasheet →

A3P060-VQ100T

✅ Drop-In
Microchip Technology
📦 100-pin VQFP (14 x 14 mm)
Flash-based FPGA · ProASIC3 · 60,000 gates · 71 I/Os · 1.5 V · 130 nm CMOS · 100-pin TQFP · Surface mount

Contact for price

View Datasheet →

A3P060-VQ100I Maximum Ratings & Electrical Characteristics

Product Type ProASIC3 flash field-programmable gate array
System Gates 60,000 gates
Logic Cells 1,536 cells
Logic Blocks 1,536 blocks
User I/O Count 71 I/Os
Block RAM 18 Kbit
Internal Frequency 350 MHz
Core Voltage 1.5 V
Process Technology 130 nm CMOS
Metal Stack 7-layer metal, including 6 copper layers
Configuration Memory Nonvolatile flash
Package 100-pin VQFP, 14 x 14 mm
Package Height 1 mm
Lead Pitch 0.50 mm
Mounting Type Surface mount
Logic Family CMOS
Optional Soft ARM Support Supported by the ProASIC3 flash FPGA family

A3P060-VQ100I 1 mm Pin Configuration Guide

Pin configuration for A3P060-VQ100I (1 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

1 mm package pinout diagram for A3P060-VQ100I

No detailed pinout data available for A3P060-VQ100I.

Refer to the datasheet for full pin configuration.

Typical Applications

A3P060-VQ100I is suitable for 6 applications: Industrial Control Logic, Network Interface Front End, Programmable Test Equipment, Instrument Signal Conditioning, Embedded Gateway and Sensor Hub, Programmable Communication Adapter.

🏭

Industrial Control Logic

The A3P060-VQ100I fits compact industrial controllers that combine deterministic control logic with field-updatable configuration. Its 60,000 system gates and 1,536 logic cells can support control, sequencing, and interface logic, while 71 user I/Os provide connections to sensors, actuators, and field-bus transceivers. The nonvolatile flash configuration supports Instant On behavior and permits design updates without replacing the device. Engineers should use the ProASIC3 timing constraints for the 350 MHz internal performance target and validate every external I/O against the selected speed and temperature grade.

🌐

Network Interface Front End

The A3P060-VQ100I is suitable for protocol handling, packet preprocessing, and interface adaptation in embedded network equipment. Its 71 I/Os can support multiple data buses and control signals, while 18 Kbit of block RAM provides limited on-chip buffering for framing, counters, or dual-port data paths. Unlike a soft processor-only implementation, the programmable logic can execute parallel word-level operations and protocol state machines concurrently. Board-level validation must account for 1.5 V core power, flash configuration access, and signal timing under the selected device grade.

🔧

Programmable Test Equipment

The A3P060-VQ100I can implement adaptable sequencing, pattern generation, and acquisition-control logic for compact test and measurement systems. Its 1,536 logic cells and 71 I/Os are useful for coordinating instruments, switching control signals, and executing time-based test sequences. Nonvolatile configuration makes it practical to store multiple test personalities or update hardware behavior in the field. The implementation should reserve configuration pins and programming access, follow the manufacturer's decoupling layout, and verify external timing rather than treating the 350 MHz internal figure as an I/O-rate guarantee.

📟

Instrument Signal Conditioning

The A3P060-VQ100I can implement digital filtering, sensor-path compensation, calibration tables, and control sequencing around precision converters. Its parallel FPGA architecture is useful when the design must combine multiple data streams or perform deterministic sampling-control functions. With up to 71 I/Os and 18 Kbit of block RAM, the device can support moderate acquisition pipelines and embedded control functions without relying entirely on a microcontroller. Designers should establish clock-domain boundaries, constrain interface paths, and verify I/O voltage compatibility with every external component.

🧩

Embedded Gateway and Sensor Hub

The A3P060-VQ100I suits gateway hardware that must translate between sensors, communication links, and local control logic. Its 71 I/Os can accommodate digital sensors, status indicators, and communication peripherals, while the nonvolatile flash configuration supports rapid boot and field updates. Parallel logic can implement filtering, packet checks, or timing conversion alongside a microcontroller. The system design should provide a robust configuration path, verify 1.5 V supply sequencing, and isolate noisy switching or communication circuits to limit coupling into sensitive FPGA inputs.

📡

Programmable Communication Adapter

The A3P060-VQ100I can serve as the protocol engine in compact communication adapters requiring flexible logic and nonvolatile configuration. The available logic can implement framing, filtering, address decoding, and low-level timing assistance, while 71 I/Os permit several parallel or serial interfaces. The 130 nm CMOS device is manufactured in a mature ProASIC3 process with a 100-pin VQFP footprint, simplifying hand assembly and inspection compared with a very fine-pitch BGA. Production designs must verify transceiver voltage levels, clock quality, configuration pins, and timing margins for the selected speed suffix.

Recommended Products Summary

What are the key specifications of A3P060-VQ100I that engineers should know?
The A3P060-VQ100I combines 60,000 system gates, 1,536 logic cells, up to 71 user I/Os, 18 Kbit of block RAM, and 350 MHz internal performance in a 100-pin VQFP package. According to the Microchip ProASIC3 Flash Family FPGAs datasheet, the device uses 130 nm CMOS technology with a seven-layer metal structure containing six copper layers. Its nonvolatile flash configuration supports Instant On operation and allows the logic design to be updated without replacing the device.
Where can I download the A3P060-VQ100I datasheet PDF?
The A3P060-VQ100I datasheet can be downloaded from Microchip's ProASIC3 Flash Family FPGAs with Optional Soft ARM Support document. Use the manufacturer PDF for the authoritative pin description, electrical limits, timing tables, configuration requirements, and package drawings. The document is also the correct source for checking whether a board-level assumption about the 350 MHz internal frequency or 71 available I/Os remains valid for the selected speed and temperature options.
What is the A3P060-VQ100I package and pin count?
The A3P060-VQ100I uses a 100-pin VQFP package measuring 14 x 14 mm, with a 0.50 mm lead pitch and a stated package height of 1 mm. Distributor and family documentation identify the same 100-pin footprint, although some catalog records call the package TQFP or PQFP. Consult the Microchip package drawing and pin-description table before laying out the PCB, particularly for power, ground, configuration pins, and dedicated user I/Os.
What is the difference between A3P060-VQ100I and A3P060-1VQ100?
A3P060-1VQ100 and A3P060-VQ100I both use the ProASIC3 60K-gate device in a 100-pin VQFP package and provide 71 user I/Os. The explicit speed-grade marking in A3P060-1VQ100 identifies a speed option, while the ordering information for A3P060-VQ100I identifies its automotive-oriented option. Both are same-family devices, but the exact speed, temperature, qualification, and timing limits must be checked in the manufacturer ordering table before substitution.
Can A3P060-1VQ100 replace A3P060-VQ100I on the same PCB?
A3P060-1VQ100 is a same-family, same-package candidate for A3P060-VQ100I, but replacement should be conditional on the exact speed and temperature requirements. Both are listed with 60,000 system gates, 1,536 logic cells, 71 I/Os, and a 100-pin VQFP format. The difference is the explicit speed-grade designation in A3P060-1VQ100, so verify timing closure, qualification, and the manufacturer ordering information before using it as a drop-in replacement.
When should I choose A3P060-VQ100I over another ProASIC3 60K-gate option?
Choose A3P060-VQ100I when the design specifically requires its automotive-oriented ordering option, 100-pin VQFP footprint, 71 user I/Os, and 18 Kbit block RAM. Select a speed-marked A3P060-1VQ100 when that speed grade is explicitly intended and meets timing requirements. Select A3P060-2VQ100 or A3P060-1VQG100T only after checking the corresponding speed, grade, and ordering differences. The common 100-pin package simplifies physical comparison but does not eliminate timing validation.
Is A3P060-VQ100I suitable for industrial control and communications equipment?
The A3P060-VQ100I is suitable for compact control, communications-front-end, instrumentation, and test-equipment designs that need moderate programmable logic with nonvolatile configuration. Its 60,000 system gates, 1,536 logic cells, 71 I/Os, and 18 Kbit block RAM provide enough resources for modest control and interface logic. The 350 MHz internal frequency is a timing target rather than a guarantee that every external interface will operate at that rate.
What can replace A3P060-VQ100I?
The closest verified replacements are same-family ProASIC3 devices in the 100-pin VQFP package, including A3P060-1VQ100, A3P060-2VQ100, A3P060-1VQG100T, and A3P060-VQG100I. All retain the 60K-gate ProASIC3 identity and 100-pin format, but speed-grade, temperature, qualification, and ordering suffixes can change. Treat them as drop-in candidates only after checking the pinout, timing limits, configuration behavior, and qualification requirements for the original design.
What is the best cross-brand equivalent for A3P060-VQ100I?
No cross-brand drop-in equivalent is established by the available manufacturer and comparison records for the A3P060-VQ100I's exact 100-pin VQFP pinout. A different FPGA family may offer similar gate count or logic resources, but gate count alone does not establish pin-to-pin compatibility, I/O standards, configuration voltage, timing, or tool support. For a PCB replacement, use the verified same-family ProASIC3 options and complete a signal-by-signal and configuration-interface review.
Is A3P060-VQ100I the same as A3P060-VQG100I?
Both A3P060-VQ100I and A3P060-VQG100I belong to the 60K-gate ProASIC3 family and use 100-pin VQFP documentation, but their ordering suffixes are not interchangeable without checking the manufacturer table. The listed comparison data associates A3P060-VQG100I with a 220-page datasheet, while the target is identified as an automotive-oriented ordering option. Confirm speed grade, temperature range, qualification, and package marking before treating the devices as equivalent.
Where can I buy A3P060-VQ100I and how do I request current pricing?
Use the Request a Quote form on this page to request current A3P060-VQ100I pricing, stock confirmation, lead time, and minimum order quantity. The manufacturer and distributor records identify the exact orderable MPN in a 100-pin VQFP package, but no fixed current unit-price table is available for extraction. A complete quote should also confirm authorized channel status, date codes, packaging condition, and whether any lifecycle change has occurred since the last verification.
What is the lead time for A3P060-VQ100I?
The current lead time for A3P060-VQ100I must be confirmed through the Request a Quote form on this page. The exact MPN is listed by the manufacturer ecosystem and remains traceable to the ProASIC3 family, but a responsible lead-time commitment also depends on order quantity, package or tray format, date-code availability, and authorized-channel inventory. Request a written quotation tied to the complete order configuration rather than relying on an unconfirmed generic stock estimate.
Is A3P060-VQ100I in stock?
Current A3P060-VQ100I inventory should be confirmed through the Request a Quote form on this page. Although distributor search records identify the exact 60K-gate, 100-pin VQFP device, the presence of a listing does not establish current stock at a defined quantity. A useful stock response should state available quantity, factory or channel lead time, minimum order quantity, and packaging condition for the requested configuration.
What is the price of A3P060-VQ100I?
Request the current A3P060-VQ100I price through the Request a Quote form on this page. The quote should be tied to the exact orderable MPN, quantity, tray or other packaging requirement, date code, and delivery destination. Because programmable-logic inventory can vary by speed grade, temperature option, and package format, confirm that the quotation identifies A3P060-VQ100I exactly rather than a broader A3P060 family designation.
How much power and thermal design is required for A3P060-VQ100I?
The A3P060-VQ100I requires normal FPGA power-plane and decoupling design, but exact power dissipation cannot be calculated from the available family-level data alone. Use the manufacturer's operating-current and thermal tables with the selected I/O activity, core frequency, and configured logic. For a first estimate, calculate total dissipation as the sum of core, I/O, configuration, and auxiliary currents multiplied by their respective rail voltages, then compare the result with the VQFP thermal limits and copper area.
What design tools and programming support are used with A3P060-VQ100I?
The A3P060-VQ100I is programmed through the ProASIC3 development tool flow using its nonvolatile flash configuration. The exact programmer, adapter, cable, and supported operating-system versions should be selected from the current Microchip programming-tool documentation. When replacing an FPGA, verify that the chosen tool supports the ProASIC3 device, the intended configuration file, the 100-pin package's JTAG or programming interface, and the same design-tool license assumptions.

Engineering reference data for A3P060-VQ100I — comparison, design guidance, and compliance information.

Selection Guide

Select the A3P060-VQ100I when the production design specifically calls for that orderable automotive-oriented ProASIC3 option and its 100-pin VQFP footprint. Choose A3P060-1VQ100 when the explicit speed grade is preferred and satisfies timing closure; it retains the same 60,000 gates, 1,536 cells, 71 I/Os, and 18 Kbit block RAM. Choose A3P060-2VQ100I when the -2 speed option meets the design's timing and qualification requirements. A3P060-1VQG100T and A3P060-VQG100I are useful when their speed, temperature, or ordering terms are preferable. In every case, treat the common package as a physical compatibility advantage rather than automatic functional equivalence: verify the pin description, configuration interface, timing limits, operating-temperature requirements, and qualification status before substitution.

Comparison with Alternatives

Parameter This Product A3P060-1VQ100 A3P060-2VQ100I A3P060-1VQG100T A3P060-VQG100I A3P060-VQ100T
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 100-pin VQFP (14 x 14 mm) 100-pin VQFP (14 x 14 mm) 100-pin VQFP (14 x 14 mm) 100-pin VQFP (14 x 14 mm) 100-pin VQFP (14 x 14 mm) 100-pin VQFP (14 x 14 mm)
FPGA Family ProASIC3 ProASIC3 ProASIC3 ProASIC3 ProASIC3 ProASIC3
System Gates 60,000 gates 60,000 gates 60,000 gates 60,000 gates 60,000 gates 60,000 gates
Logic Cells 1,536 cells 1,536 cells 1,536 cells 1,536 cells 1,536 cells 1,536 cells
Process Technology 130 nm CMOS 130 nm CMOS 130 nm CMOS 130 nm CMOS 130 nm CMOS 130 nm CMOS
Core Voltage 1.5 V 1.5 V 1.5 V 1.5 V 1.5 V 1.5 V
Block RAM 18 Kbit 18 Kbit 18 Kbit 18 Kbit 18 Kbit 18 Kbit

Key Differentiators

  • Maintains the complete ProASIC3 resource set while offering same-package ordering options (vs A3P060-1VQ100)
  • Uses the same 100-pin VQFP footprint and 130 nm ProASIC3 implementation (vs A3P060-2VQ100I)
  • Avoids a package redesign for typical ProASIC3 speed or ordering changes (vs A3P060-1VQG100T)
  • Provides a pin-compatible path within the established A3P060 design ecosystem (vs A3P060-VQG100I)

Design Notes

Implement the manufacturer's 100-pin VQFP land pattern with a 0.50 mm lead pitch and a 14 x 14 mm body envelope. Place the device according to the package drawing, maintain solder-mask and paste compatibility for fine-pitch leads, and avoid placing tall components where they can interfere with the 1 mm package height. Verify courtyard, assembly clearance, and footprint geometry against the current Microchip package drawing before releasing the PCB.

Separate the 1.5 V core rail from external I/O supplies and follow the ProASIC3 family's recommended power topology and decoupling arrangement. Place the smallest high-frequency bypass capacitor closest to the appropriate supply and ground pins, then add bulk capacitance near the regulator. Check every external I/O's voltage domain against the device's supported levels; do not infer I/O compatibility solely from the 1.5 V core requirement.

Use continuous ground-plane reference beneath the FPGA and constrain all clock, JTAG, configuration, and high-speed I/O paths in the timing tool. Keep clocks away from switching-power stages and noisy interface routing, and provide dedicated return paths for high-speed nets. Although the family is described at 350 MHz internally, actual interface performance depends on I/O standards, external memory or transceiver timing, board topology, and the selected speed grade.

Do not substitute an A3P060 family member solely because the gate count and VQFP-100 outline match. Verify the speed suffix, temperature option, qualification status, configuration interface, pin functions, and timing limits in the manufacturer ordering information. Also confirm the exact package code because catalog records use VQFP, TQFP, and PQFP terminology for the same general 100-pin family format.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The available product records identify the target ordering option and family construction but do not provide extractable RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. Confirm these attributes with the manufacturer or the current product documentation.

Related Searches

a3p060 vqg100 a3p060 tqg144i a3p060 fgg144i a3p060 vqg100 datasheet a3p060 datasheet actel a3p060 proasic3 a3p060 A3P060-VQ100I datasheet A3P060-VQ100I pinout A3P060-VQ100I footprint A3P060-VQ100I equivalent A3P060-VQ100I replacement A3P060-VQ100I price A3P060-VQ100I stock Microchip A3P060-VQ100I

Related Components & Terms

Microchip Technology A3P060-VQ100I A3P060 ProASIC3 field-programmable gate array FPGA programmable-logic IC flash FPGA nonvolatile flash configuration Instant On logic cell logic block system gate block RAM user I/O 130 nm CMOS 1.5 V core voltage 350 MHz internal frequency 100-pin VQFP TQFP PQFP 14 x 14 mm package 0.50 mm lead pitch JTAG MPLAB ProASIC3 development tools industrial control network interface test equipment signal conditioning sensor hub communication adapter
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details